Early confirmation of activity - Problem with actual cost updating

Hi Guys...
I have trying to find out solution with trail and error basis but.....
The issue is :
Network activity  - Planned duration 100hrs
periodic confirmation taken place .... no problem... actual cost also updated accordinly,
at one point of time, realised that activity is completed with 70hrs effort only.
then I have updated 100% completion.
what is the twist here is:
though I have completed 100% of work with 70% of actual hours,  however, system display actual costs equals to 100hrs.
I can not reduce planned hours equal to actual hours. at the same, I would like to see my activitiy completed with 70 hrs and actual cost equal to 70hrs of effort only.
is there any enhancement there so that we can have both display planned 100 hrs and actual as 70 hrs.
and costs also.
Looking forward to hear from the gurus and thanks in advance
Shal award points for appropriate answer.
Regards,
PSR

Hi,
One probable solution would be using User status which will block additional confirmations. At the point when you know that work is completed within planned hours, set this user status so that no more confirmation is possible, at th same time user will come to know that activity is completed.
Hope this helps.
Regards

Similar Messages

  • I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

    I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

    Ralph, Thanks for replying. There where no received SIP messages at all just the INVITE being sent but I have made some more progress. The mini does indeed just work. I can do everything that you are supposed to do to other ichat users on the internet. Very nice.
    The imac is still playing up but I have got further. I had peerguardian2 installed which unknown to me doesn't need to be running to prevent you for accessing 'barred' IP addresses. snatmap.mac.com is barred in the lists! I discovered this when I saw one of your other posts showed how to turn on terminal logging for ichat. Now that I have turned off peerguardian2 (using the disable filters option) I can make calls to the testbot and see the adverts. I have even done a video conference with the two testbots. I will just uninstall peerguardian2.
    However, I can not get a AV chat working to a real user....
    In response to your suggestions:-
    I have tried all the options for quicktime streaming but will try 1.5Mb/s again.
    The ichat bandwidth limit is set to "none". I am in New Zealand and I have standard ADSL (not ADSL2+) 7.6M down 512K up. The mini config is also set to none.
    Internet sharing is off.
    I have had parallels on the machine but the two interfaces that it installed "Parallels Host-Guest" and "Parallels NAT" are configured 'off' and show as not connected. Is this enough? I will uninstall parallels and see if that helps since I don't use it. I also have VMware's thing installed but that doesn't seem to add any interfaces.
    I need to capture a full trace of the imac to other ichat user to see what is happening but will update when I have does your suggested changes or have a trace
    Thanks again

  • Activation problems with ipad 2 wifi gsm

    i have been having activation problems with ipad 2 ever since it was launched in sptemeber 2013. its gets stuck on server busy try later or try using itunes. even with itunes it does not activate. went to a apple reseller. he tried updating it through some DFU mode but did not go through. now he says that the ipad will have to be sent to US for repairs. any help or advise from the users ? thanks

    I have the same problem.I hope somone comes up with a solution or it is fixed in the ios 7.1 update

  • Activation problems with iPhone 5

    Has anyone had activation problems with iPhone 5 today?? is there any kind of trouble with itunes and wireless activation??

    I have unlocked and used iphone 5's before. Never had this problem.
    When I put my tmobile SIM in it;ll say no service then go back to the actviation screen after saying "activation required"

  • I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

    I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

    Online Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • Mapping problem with compressed key update record

    Hi, could you please advise?
    I'm getting the following problem:
    About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
    filed1 = NULL
    field2 =
    field3 =
    field4 =
    field5 =
    datefield = -04-09 00:00:00
    field6 =
    field8 =
    field9 = NULL
    field10 =
    Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
    So I got Mapping problem with compressed key update record at 2012-06-01 15:44
    I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
    I don't know if it has ther same source as data corruption, could you tell me if it is?
    Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
    If I run extract beging at 15:52 it starts and works.
    But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
    I'm replicating from SQL Server 2008 to Oracle 11g.
    I'm actually using NOCOMPRESSUPDATES in Extract.
    CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
    Could you please advise why does it happen?

    Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
    Here are extract parameters:
    EXTRACT ETCHECK
    TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
    SOURCEDB TEST, USERID **, PASSWORD *****
    exttrail ./dirdat/ec
    NOCOMPRESSUPDATES
    NOCOMPRESSDELETES
    TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
    TABLE tst.table2, COLS (field1, field2, field3, field4 );
    Data pump:
    EXTRACT DTCHECK
    SOURCEDB TEST, USERID **, PASSWORD *****
    RMTHOST ***, MGRPORT 7809
    RMTTRAIL ./dirdat/dc
    TABLE tst.table1;
    TABLE tst.table2;
    Replicat:
    REPLICAT rtcheck
    USERID tst, PASSWORD ***
    DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
    SOURCEDEFS ./dirdef/sourcei.def
    HANDLECOLLISIONS
    UPDATEDELETES
    MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
    MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
    Rpt file for replicat:
    Oracle GoldenGate Delivery for Oracle
    Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
    Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
    Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
    Starting at 2012-06-05 12:49:38
    Operating System Version:
    Microsoft Windows Server 2008 R2 , on x64
    Version 6.1 (Build 7601: Service Pack 1)
    Process id: 2264
    Description:
    ** Running with the following parameters **
    REPLICAT rtcheck
    USERID tst, PASSWORD ***
    DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
    SOURCEDEFS ./dirdef/sourcei.def
    HANDLECOLLISIONS
    UPDATEDELETES
    MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
    MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
    CACHEMGR virtual memory values (may have been adjusted)
    CACHEBUFFERSIZE: 64K
    CACHESIZE: 512M
    CACHEBUFFERSIZE (soft max): 4M
    CACHEPAGEOUTSIZE (normal): 4M
    PROCESS VM AVAIL FROM OS (min): 1G
    CACHESIZEMAX (strict force to disk): 881M
    Database Version:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE     11.2.0.1.0     Production
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    Database Language and Character Set:
    NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
    NLS_LANGUAGE = "AMERICAN"
    NLS_TERRITORY = "AMERICA"
    NLS_CHARACTERSET = "CL8MSWIN1251"
    For further information on character set settings, please refer to user manual.
    ** Run Time Messages **
    Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
    2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
    MAP resolved (entry tst.table1):
    MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
    2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
    Using the following default columns with matching names:
    field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
    Using the following key columns for target table R_019_000001.TCALCULATE: field3.
    2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
    2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
    2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
    2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
    Source Context :
    SourceModule : [er.main]
    SourceID : [er/rep.c]
    SourceFunction : [take_rep_err_action]
    SourceLine : [16064]
    ThreadBacktrace : [8] elements
    : [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
    : [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
    : [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
    : [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
    : [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
    : [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
    : [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
    : [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
    2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
    * ** Run Time Statistics ** *
    Last record for the last committed transaction is the following:
    Trail name : ./dirdat/dc000000
    Hdr-Ind : E (x45) Partition : . (x04)
    UndoFlag : . (x00) BeforeAfter: A (x41)
    RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
    IOType : 115 (x73) OrigNode : 255 (xff)
    TransInd : . (x03) FormatType : R (x52)
    SyskeyLen : 0 (x00) Incomplete : . (x00)
    AuditRBA : 44 AuditPos : 71176199289771
    Continued : N (x00) RecCount : 1 (x01)
    2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
    Name: DBO.TCALCULATE
    Reading ./dirdat/dc000000, current RBA 987, 0 records
    Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
    From Table tst.table1 to tst.table1:
    # inserts: 0
    # updates: 0
    # deletes: 0
    # discards: 1
    Last log location read:
    FILE: ./dirdat/dc000000
    SEQNO: 0
    RBA: 987
    TIMESTAMP: 2012-06-01 15:48:56.285333
    EOF: NO
    READERR: 0
    2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
    Discard file:
    Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
    Key column filed3 (0) is missing from update on table tst.table1
    Missing 1 key columns in update for table tst.table1.
    Current time: 2012-06-05 12:58:14
    Discarded record from action ABEND on error 0
    Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
    error at seqno 0 rba 987
    Problem replicating tst.table1 to tst.table1
    Mapping problem with compressed key update record (target format)...
    filed1 = NULL
    field2 =
    field3 =
    field4 =
    field5 =
    datefield = -04-09 00:00:00
    field6 =
    field8 =
    field9 = NULL
    field10 =
    Process Abending : 2012-06-05 12:58:14

  • Problems with the windows update site in 32-bit Vista Business

    Hi Everyone,
    I am experiencing problems with the windows update site. As far as I know it shold make a link to the Windows Update module on-board and show the available updates after scanning. However, I get to the page that says "Checking if your computer has the latest version of Windows updating software for use with this website" and the next page I get is "The website has encountered a problem and cannot display the page you are trying to view". The error number is 0x80070002. I go to the knowledge base and delete the content of the Data Store folder as advised, but to no use at all. Active X controls are enabled Java is working fine. I've cleaned the register and everything, did a complete scan with Onecare as advised by Microsoft, which did not find anything but again the same error message. I am using KIS 2009 and I am sure I have no viruses or any other malware. I even tried to go to the update site with the KIS switched off but to no avail too. On the other hand I don't have problems with the automtic updates and when I run a manual update from the Update module everything is OK. Do you have any suggestion as to what might be the issue with the website updates?
    P.S. I am using 32-bit Windows Vista Business on a Lenovo W500.

    hello
    You may be having a problem with the windows update agent.Since its a problem relating to windows update microsoft support personnel may help you out.follow this link and contact them by chat or email
    http://support.microsoft.com/common/international.aspx?gprid=6527&acty=Start&ctl=Region&wf=Workflow&... 
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Is there a problem with this latest update?

    I have tried several times to instal latest player and for some reason it will not get past step 2 of 3. I can download and hit save, run and then nothing. Is there a problem with this latest update? I use Vista and run Firefox

    I tried to install the one you just suggested on 4/14 and it got as far as opening the installer box then went to white screen for 15min till i had to restart computer. And this morning windows updated and again flash wanted an update so after cleaning flash memory and running a cleaner i tried again. and this time got to step 2of 3 again. I am still running 16.0.0.30.5 It will not update any further
          From: m_vargas <[email protected]>
    To: John Ockajik <[email protected]>
    Sent: Tuesday, April 14, 2015 10:50 AM
    Subject:  Is there a problem with this latest update?
    Is there a problem with this latest update?
    created by m_vargas in Installing Flash Player - View the full discussionHi, We have several different installer files.  Having the file name narrows down which one is being problematic. There was a Flash Player release earlier this morning and several files have been updated.  Please try downloading again.  If you experience the same problem, please clear the browser cache, as the old one may still be downloading.  If the issue persists after clearing the browser cache, please post the name of the file that is being downloaded. Thank you. --Maria If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7437403#7437403 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7437403#7437403 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
    Start a new discussion in Installing Flash Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Problems with software the update with Nokia 6233

    Problems with software the update with Nokia 6233
    Hello,
    I have so far some-paints tries my software to update.
    Each time the update procedure begins, sometime stands then on the telephone “test mode”.
    On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
    If I change my profile attitudes since that for example, then after a telephone restart again deleted.
    What there can I make?
    GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

    It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
    You need to take it to a nokia care point for repair under warranty.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Mapping problem with compressed key update record (target format)...

    Hi Guys,
    Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
    How to overcome this issue, any idea...
    2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
    2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
    2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
    2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
    2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
    2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
    *= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
    2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
    2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
    2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
    Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
    Current time: 2011-08-04 10:35:06
    Discarded record from action ABEND on error 1407
    OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
    (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
    Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
    error at seqno 68708 rba 44132192
    Problem replicating INFRA.CUST to INFRA.CUST
    *Mapping problem with compressed key update record (target format)...*
    ORD_QTY = 500
    ORD_PRICE = 37430
    SCRP_CODE =
    MKRT_CODE = N
    Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
    04 10:35:05
    Current time: 2011-08-04 10:35:06
    Discarded record from action ABEND on error 1407
    OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
    (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
    Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
    error at seqno 68708 rba 44132192
    Problem replicating INFRA.CUST to INFRA.CUST
    Mapping problem with compressed key update record (target format)...
    ORD_QTY = 500
    ORD_PRICE = 37430
    SCRP_CODE =
    MKRT_CODE = N
    Any inputs / help would be appreciated.
    Regards,
    Manish

    The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
    This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

  • HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

    I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

    Not sure how this is an ipod touch question.
    Perhaps you should post in the itunes forum.

  • I have a problem with my application update since i updated to iOS6

    i am having a problem with my application update since i updated my iphonw to iOS 6. small updates are taking very long time and even not getting finished after several hours.
    my internet connection is very fine and having good speed. i think updating to iOS 6 was a mistake....

    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.

  • I am having problem with iMessage after updating my 5s to iOS 8.0.2

    I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through

    Hello Huyen,
    Thank you for using Apple Support Communities.
    You can use the following article to troubleshoot Messages:
    iOS: Troubleshooting Messages
    Regards,
    Jeff D. 

  • Problem with iOS 5 update

    Hi everyone!
    Has someone of you have a problem with iOS 5 update? My iPhone after updating to the newest version, from time to time appears "There's no SIM card" . I don't know if there's a problem with MY iPhone or update "error"? Thanks in advance for your response.
    Best regards,
    glaenken

    Did you try to reset the phone by holding the sleep and home button until the Apple logo comes back again?
    Also try this, copied from http://support.apple.com/kb/TS2802
    "No SIM installed" alert (GSM models only)
    Remove the SIM card (micro-SIM on iPhone 4). Insert the SIM eject tool or the end of a small paper clip into the hole on the SIM tray. Press firmly and push it straight in until the tray pops out. See this document for more information.
    Verify the SIM card is not damaged or dirty.
    Reinstall the SIM card.
    Turn the phone off and back on.
    Wait approximately two minutes, then see if iPhone detects the SIM card and if it will register on the network.
    If that doesn't work, try another SIM card, if possible, to see if it is detected.

Maybe you are looking for