Early mac pro with 10.10.2 and L10.1- a few issues

Hi All,
Wondering if new mac pro will remedy the following. Since updating to LX10 and Yosemite on my early '09 MacPro, having these issues:
1.Sluggish in the graphics (automation drawing, redraws, linked score and piano roll graphics, etc).
2. Audio frequently mutes when rig is being synced to mtc. Unitor for sync
3. Chase Notes Setting disables after most scissor edits
4. Screen sets frequently get mangled
My template utilizes several slaves over VEP, plus many software insts in Logic, also large audio mixer. Template was not imported, but built in LX
All was a breeze on this rig with L9/SnowLep.
My main question is, will all of this clear up by upgrading one of the the new MacPros (circular thing)? Are many people using the new ones yet with Logic?
Thanks for any insight.
Mark
MacPro early '09 - Intel 2x2.6, 16G Ram
Graphics: nvdia GeForce 8800GT -dual 30' Apple Cinemas
Yosemite 10.10.2
Logic 10.1
RME Madi
Unitors

Hi Nigel and Pancenter,
One other issue I'm having is very slow Undo. (Only 25 steps in prefs). Below is a report showing a LEGACY FILE VAULT ERROR in System Launch Daemons. Not sure how to resolve that or what to look for. Thanks for any advice.
Mark
EtreCheck version: 2.1.8 (121)
Report generated February 28, 2015 at 2:21:52 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac Pro (Early 2009) (Technical Specifications)
    Mac Pro - model: MacPro4,1
    2 2.26 GHz Quad-Core Intel Xeon CPU: 8-core
    16 GB RAM Upgradeable
        DIMM 1
            2 GB DDR3 ECC 1066 MHz ok
        DIMM 2
            2 GB DDR3 ECC 1066 MHz ok
        DIMM 3
            2 GB DDR3 ECC 1066 MHz ok
        DIMM 4
            2 GB DDR3 ECC 1066 MHz ok
        DIMM 5
            2 GB DDR3 ECC 1066 MHz ok
        DIMM 6
            2 GB DDR3 ECC 1066 MHz ok
        DIMM 7
            2 GB DDR3 ECC 1066 MHz ok
        DIMM 8
            2 GB DDR3 ECC 1066 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless:  en2: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 8800 GT - VRAM: 512 MB
        Cinema HD 2560 x 1600
        Cinema HD 2560 x 1600
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: one day 0:55:55
Disk Information: ℹ️
    HL-DT-ST DVD-RW GH41N 
    WDC WD5000AZLX-00CL5A0 disk3 : (500.11 GB)
        EFI (disk3s1) <not mounted> : 210 MB
        SYSTEM MAV (disk3s2) / : 499.25 GB (378.25 GB free)
        Recovery HD (disk3s3) <not mounted>  [Recovery]: 650 MB
    WDC WD1001FALS-00Y6A0 disk1 : (1 TB)
        EFI (disk1s1) <not mounted> : 210 MB
        LOGIC (disk1s2) /Volumes/LOGIC : 999.86 GB (739.21 GB free)
    WDC WD10EADS-00L5B1 disk2 : (1 TB)
        EFI (disk2s1) <not mounted> : 210 MB
        FULL SAMPLE LIBRARY (disk2s2) /Volumes/FULL SAMPLE LIBRARY : 999.86 GB (32.84 GB free)
    WDC WD1002FAEX-00Z3A0 disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        EXTRA SPACE (disk0s2) /Volumes/EXTRA SPACE : 999.86 GB (483.67 GB free)
USB Information: ℹ️
    Syncrosoft eLicenser
    Apple Computer, Inc. Apple Cinema HD Display
    Apple, Inc. Keyboard Hub
        KORG INC. nanoPAD2
        Apple Inc. Apple Keyboard
    Mitsumi Electric Apple Optical USB Mouse
    Kensington Kensington Expert Mouse
    KORG INC. nanoKONTROL
    Broadcom BCM2046B1
        Broadcom Corp BCM92046DG-CL1ROM
    Emagic GmbH Unitor8 MkII
    iLok iLok
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [loaded]    com.RME.driver.HDSPMADI (4.02 - SDK 10.9) [Click for support]
    [not loaded]    com.caiaq.driver.NIUSBGuitarRigMobileDriver (2.6.0 - SDK 10.8) [Click for support]
    [not loaded]    com.caiaq.driver.NIUSBHardwareDriver (2.6.0 - SDK 10.8) [Click for support]
    [loaded]    com.kensington.trackballworks.driver (1.1.2 - SDK 10.7) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.7) [Click for support]
    [loaded]    com.musiclab.driver.molcp3 (3.3.5) [Click for support]
    [not loaded]    com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
        /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
    [not loaded]    com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
    [not loaded]    com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
    [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
    [not loaded]    com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
Startup Items: ℹ️
    MolCp3Startup: Path: /System/Library/StartupItems/MolCp3Startup
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.loginwindow.LFVTracer.plist [Click for details]
Launch Agents: ℹ️
    [running]    com.eastwest.server.plist [Click for support]
    [running]    de.rme-audio.hdspAgent.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist [Click for support]
    [running]    com.musiclab.molcp3d.plist [Click for support]
    [running]    com.paceap.eden.licensed.plist [Click for support]
    [loaded]    PACESupport.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    TrackballWorksHelper    Application Hidden (/Library/PreferencePanes/TrackballWorks.prefPane/Contents/Resources/TrackballW orksHelper.app)
    NIHardwareAgent    Application Hidden (/Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
    DuckDuckGo
3rd Party Preference Panes: ℹ️
    Flash Player  [Click for support]
    TrackballWorks  [Click for support]
    Native Instruments USB Audio  [Click for support]
    Unitor 8-64  [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
    Destinations:
        LOGIC_TIME MACH [Local]
        Total size: 698.56 GB
        Total number of backups: 40
        Oldest backup: 2014-02-05 03:09:48 +0000
        Last backup: 2015-02-19 08:16:12 +0000
        Size of backup disk: Excellent
            Backup size 698.56 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
        17%    Logic Pro X
         7%    coreaudiod
         6%    WindowServer
         5%    TotalmixFX
         4%    Logic Pro
Top Processes by Memory: ℹ️
    5.65 GB    Vienna Ensemble Pro
    3.40 GB    Logic Pro X
    498 MB    Logic Pro
    429 MB    softwareupdated
    361 MB    WindowServer
Virtual Memory Information: ℹ️
    713 MB    Free RAM
    5.74 GB    Active RAM
    5.04 GB    Inactive RAM
    5.66 GB    Wired RAM
    7.77 GB    Page-ins
    139 KB    Page-outs
Diagnostics Information: ℹ️
    Feb 28, 2015, 12:15:05 AM    /Library/Logs/DiagnosticReports/LegacyFileVaultMessageTracer_2015-02-28-001505_ [redacted].crash
    Feb 27, 2015, 01:25:03 PM    Self test - passed

Similar Messages

  • Mac Pro with 2 LAN ports and 2 PCs.

    Dear friends,
    I've been trying to set up 2 different networks, actually to connect my Mac Pro with to two PCs. Well, I can't get my Mac to have access to the PC that is plugged into 2nd Ethernet port. However, if I unplug one of the cords, no matter what port it is 1 or 2, it works and see connected PC.
    My IP addresses are set manually to 192.168.7.1 and 192.168.7.2. NetBIOS names are also different MACPRO and MACPRO2. Subnet mask is 255.255.255.0. Rest is not changed from defaults. And only 1 Ethernet interface sees the PCs.
    Could anyone suggest me something? Cos I really wanna have my Mac to be connected to these PCs.
    Thanks in advance.

    Guys, anyone?! Really need that thing running....

  • Mac Pro with x1900xt  Screen keeps flashing to black???

    Hi,
    I was just wondering if anyone else has had the problem, of your screen, going to black then coming back intermittingly. I just got my Mac Pro with an ati x1900xt and I'm connected to a Dell 30in screen. I have it connected to the left port nearest the side of the case. Has anyone else had this problem and got it fixed? I've tried everything, from switching cables, monitors, and I have updated all the software... can anyone help me here?
    Thank you.
    Koji
    Mac Pro 3ghz ati1900 4gig ram 500gig HD   Mac OS X (10.4.7)  

    I am having similar problems with my new Mac Pro 3GHz with ATI X1900 XT.
    I have a Dell 2405FPW (24") as my primary monitor, and a Dell 2001FP (20") as my secondary monitor. Both are connected via DVI.
    If I plug in the 24" into port 1 and the 20" into port 2, I see correct video on the 24", but a black screen on the 20". If I change resolution from 1600x1200 to 1280x1024 on the 20", I get video on the 20". I can then change resolution back to 1600x1200 and retain video on both monitors. However, if I turn the 20" monitor off, when I turn it back on, it is black again, and stays that way unless I do the resolution change again. Note that the monitor detects a signal, different from when there is no signal at all - it is getting a black picture, and that's what it's displaying. This happens with a fresh out of the box install of Mac OS X, as I did a clean install on another partition to troubleshoot it.
    Now, here's where it gets interesting. If I swap the connections - 24" to port 2 and 20" to port 1, keeping the 24" with the menu bar, then I get video on both monitors. However, I get black picture on both monitors during the entire boot sequence and do not see video until the login window appears. I can turn the monitors off and on after that point and continue to retain video. So, that's the setup I'm using, even though it is not ideal to not be able to see anything before the login window.
    On a possibly related note, if I start X11, the X11 server takes over the entire display, showing a gray checkerboard pattern as the background with no menu bar, no dock, nothing other than an xterm visible and accessible. If I command-Q, it will quit X11 and everything returns. It's like the X11 window manager is taking over and not merging with the Mac OS X desktop.
    It seems like the ATI drivers and/or Mac Pro firmware and/or Mac OS X have some bugs to be worked out.
    Mac Pro   Mac OS X (10.4.7)   ATI X1900 XT

  • Cannot install lion from mac appstore. i have a macbook pro early 2011 model with 10.6.8 and i keep getting a wierd error NSInternalInconsistencyException i have no idea what to do.

    I cannot install lion from mac appstore. i have a macbook pro early 2011 model with 10.6.8 and i keep getting a wierd error NSInternalInconsistencyException i have no idea what to do.

    I changed my wireless broadband to a landline-base DSL wifi and it works like a charm. Sun was the culprit even you fiddle with its router and disable firewall, it won't work.
    try changing yours too and let me know how it goes.

  • HT204350 I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive.  It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there.  I cant see photos, etc.

    I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive.  It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there.  I cant see photos, etc..  It shows the backup as a file and shows various system info.  but there are no photos or other files shown.
    Thanks for any advise.
    Mike

    A PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data.  Also ExFat formatting is not supported by 10.6.3 or earlier.  I would try viewing the backup on another Intel Mac with at least 10.6.4.  If it isn't there, then the backup never really took place.  I much profer a hard drive with Carbon Copy Cloner.

  • I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

    i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

    Care to share which OS you are using?

  • Using Logic 7.2 on a Mac Pro with Protools 7.2.1 and Mac OS 10.4.7

    I am researching purchasing a New Protools/Logic System
    Seems the version of Protools to use with the new Mac Pros is 7.2.1, which only recently came out to work with the new "Mac Pros" Digidesign has stated thhat it works with and Mac OS 10.4.7
    The latest version of Logic is 7.2 which has been out for a while....hmmm
    Is anybody using Logic 7.2 on a New Mac Pro with Protools 7.2.1 and Mac OS 10.4.7, and does it work?

    Logic Pro 7.2.2 is not compatible with DAE/TDM on a Mac Pro INTEL.
    You will see only "CoreAudio" as available choice, when trying to engage your audio hardware.
    We have to wait for any announcements in this regard, maybe at AES or DigiDays in San Francisco.
    Best,
    21th

  • HT201343 I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro

    I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro

    Mac Pros don't support Airplay.  Only some post 2011 Macs do, MAc Pros aren't amongst them.
    http://www.apple.com/uk/osx/specs/
    You could try Airparrot software as a workaround.
    AC

  • I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do?  How can I get the data off this disc?  I can see it has been already burned, so files are on there?

    I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do?  How can I get the data off this disc?  I can see it has been already burned, so files are on there?

    Try cleaning the lens and see if that will restore functionality to the DVD drive.  Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth)  around a business card and insert it gently inside the slot.
    If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
    Ciao.

  • I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leaopard on one drive and Mountain Lion or Lion on others?

    I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leopard on one drive and Mountain Lion or Lion on others?
    I need to keep Snow Leopard so that I can run some old softward.

    If you are careful you can put at least two on one drive, having Recovery from Lion and Mountain Lion on their own drives though.
    CCC can clone Lion Recovery - great for moving or backup.

  • Connecting Mac Pro with GeForce GT120 to monitor and TV at same time

    Hi - I just want to know in advance of buying the latest 8 core Mac Pro with a single NVIDIA GeForce GT120 graphics card, will this connect to both my apple cinema display 20'' and my Panasonic Viera LCD TV's 'PC Input' at the same time?
    From what I can tell this graphics card has a small output port and a wider one - am I right in thinking the smaller one is a mini-display port which would connect to my TV's 'pc input' and the other is DVI which connects to the Apple cinema display? --- is the 'mini display port' something that connects directly into thr TV or is an adaptor required?
    Thanks for reading!

    The PC input is most likely VGA. A standard (old, but still common) connection port for most laptops (which is the primary usage). If you had a desktop, you would probably connect through DVI to HDMI.
    You need a DVI to VGA adapter. Also check if you need male or female, as you might need an VGA adapter, plus VGA cord.
    This adapter usually comes with all Mac Pros:
    http://store.apple.com/us/product/M8754G/A?mco=NDcyMDY3OA
    Then you just need to buy a long VGA cord.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812105807
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812105805
    Again double check the if you need male/male or male/female, etc.

  • Mac pro cinema display cuts out and can't access Mac with screen sharing

    Hi
    A weird thing has started happening to my Mac Pro today. After using it for a few minutes the cinema display it is attached to on the Mac Pro just goes black. The Mac Pro is clearly still on - the light is on and i can hear the fans. The Mac Pro shows up on my local network and i can connect to it and access files from my Macbook, but screen sharing doesn't work (i just get the message 'contacting mac pro' and nothing else) and i can't connect to shared iTunes library either, which makes me think it is not just a display issue. I cannot wake the computer with the mouse or keyboard, which makes me think it isn't just a sleep issue. All i can do is physically turn the Mac Pro off, start it up and it will start up successfully and then work for a few more minutes before i get the same problem. I have reset the PRAM and SMC and still have the same problems. Can anyone suggest anything else i can try?
    I should mention that i have another problem with the Mac Pro in that it has been spontaneously waking up from sleep and starting up from shutdown, and i still haven't resolved this. I don't know if it is connected to the above issue.
    thanks
    nick

    I have experienced almost the exact same thing with my new 2008 Mac Pro and my 30" Apple display. It has happened to me twice in the last few weeks. The first time I chalked it up to a fluke, but now that it's happened again I searched the forums. In both cases I've had music playing in iTunes which continues playing, goes on to the next track, and so on. So the machine has not crashed in full. I too can connect to the files via another computer on the network, but cannot share the screen.
    I have not had the sleep issues you have had.
    I'll look at the link you provided in your next post to see where that gets me, but I wanted to let you know you were not alone on this one.

  • Hi.at first sorry for my bad english language.i have mac book pro with two os(win7 and mac10.9.3)when i want to restore my iPad air in mac os iTunes error 17 but in win7 easily restore!why?

    hi.at first sorry for my bad english language.i have mac book pro with two os(win7 and mac10.9.3)when i want to restore my iPad air in mac os iTunes error 17 but in win7 easily restore!why?

    Hi there saharalirezaie,
    You may find the troubleshooting steps in the article below helpful.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    -Griff W. 

  • What is the total weight and dimentions of a Mac Pro with retina 13"? Including any extra delivery packaging (i.e box, bubble rap, etc)? Thx

    What is the total weight and dimentions of a Mac Pro with retina 13" including any extra delivery packaging (i.e box, bubble rap, etc)? Thx

    What is the total weight and dimentions of a Mac Pro with retina 13" including any extra delivery packaging (i.e box, bubble rap, etc)? Thx

  • My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

    My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

    General purpose Mac troubleshooting guide:
    Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems:
    Isolating an issue by using another user account
    Identifying resource hogs and other tips:
    Using Activity Monitor to read System Memory and determine how much RAM is being used
    Starting the computer in "safe mode":
    Mac OS X: What is Safe Boot, Safe Mode?
    To identify potential hardware problems:
    Apple Hardware Test
    General Mac maintenance:
    Tips to keep your Mac in top form
    Troubleshooting: My computer won't turn on
    https://support.apple.com/kb/TS1367
    Where are your bootable backups and clones stored?
    What do you have to boot from to restore or attempt to recovery files that are not backed up?
    It won't be a PowerMac. People tend to think they look alike? or mean the same thing.
    http://www.everymac.com/systems/apple/mac_pro/specs/mac-pro-quad-2.66-specs.html
    Try zap PRAM and SMC Reset. If you have ATI 5770 which many have upgraded to you won't be able to use older DVD or systems than 10.6.5

Maybe you are looking for