Early start & lates start date

Hi experts,
I want to change the early start & latest start date which are in grey mode of maintenance order operation direcly instead of changing the order basic start date .How can I do it? please through some clues.thanks

Hi,
Can you please try this.
1. IW32, go to Operations tab, Select Operation 10 (assuming you only have one operation)
2. Click the "Dates" button from the buttons at teh bottom
3. On the Restrictions tab, StartPoitn, Select "Must Start On", then specify the Date you want to start the work on the right
4. Save the Work Order
Regards,
Joey

Similar Messages

  • The system could not calculate the fiscal year start or finish date message

    While running the transaction FMO1 and FMOA in funds management we have confronted with the following problem.
    Message no. FI 500
    The system could not calculate the fiscal year start or finish date.
    WE are using year dependent fiscal year and are implementing Funds Management for the first time.
    SAP Version – 4.0 B
    Priority – Urgent
    For the same problem in Version 4.5 and 4.6 there is a note number 213713 available on service.sap.com.

    No, there is no bug.
    Those activities that have asterisks (Stars) next to their start or finish dates (despite having no constraints) have "External Early Start" or "External Late Finish" dates, respectively, assigned to them. These dates get imported with XER and represent links to activities of those projects that are not in your database but in the external database where the XER originated from.
    To remove, filter out all such activities (with stars) and delete their "External" dates. However, be aware that Start or Finish dates of such activities might change if you delete theire External dates. If getting rid of asterisks does alter your schedule, ask the person who sent you the XER to confirm start/finish dates of all such (starred) activiites.
    Cheers

  • 2LIS_04_P_MATNR Delta - Actual Start and Finish Dates

    My company is experiencing a problem with retrieving the actual start and finish dates and times from the 2LIS_04_P_MATNR data source with delta extraction. The R/3 source system is version 4.6C. The BI system is version 7.0. Specifically, the data source fields GETRI, GEUZI (finish), GSTRI, GSUZI (start) are sometimes never populated with data. These fields are often blank in the production data extracted. It was observed that the actual delivery date for the order (posting date of goods receipt from process order) was often an earlier date than the GETRI date. This scenario was tried in test systems, and it was found that if the final goods receipt for the process order was posted before the end of the last phase was confirmed, the actual finish date and time fields were not transferred to BI from R/3. In fact, it was noted that a new record was not created in the 2LIS_04_P_MATNR delta queue when the end of the last phase was confirmed. Regarding the actual start data, this is missing if a goods receipt from the process order is posted before the start of the first phase is confirmed.
    Has anyone else experienced this problem? How was it resolved?
    SAP Notes have been searched regarding this problem, and in fact, a customer message has been opened with SAP for this problem. However, we thought we would try asking the community as well, to see if any other users have experienced this, and how the problem was resolved. We also understand that it may be an unusual practice to post a goods receipt from the process order before the end of the last phase is confirmed. In a more general sense, has anyone else experienced that some of the data source fields are never populated if the R/3 information is entered after the posting of the final goods receipt against the process order? Our testing indicated that no more delta records are created for the 2LIS_04_P_MATNR data source after the final goods receipt was posted.
    Thank you,
    Chris Sopek

    Hello,
    we are experiencing your same problem! The only difference to your scenario is that wer are currently operating on SAP ECC 6.0.
    Did you receive any answer from SAP?
    We opened a request for the same topic.
    Thanks

  • If you're trying use your hotspot and connected to wifi on your iphone, does the wifi stop working and start using your data instead of staying connected to the wifi?

    If you're trying use your hotspot and connected to wifi on your iphone, does the wifi stop working and start using your data instead of staying connected to the wifi?

    Spencer Simmonds wrote:
    Thanks for the quick response. What you have said makes sense but there is no rhyme or reason to he data used. I reset my cellular data counter to zero so both sent and received read zero. I was connected to wifi and let the phone to go into sleep mode. I waited about ten minutes and sent myself the same email four times, each with a 750 kb attachment. It was sent to my .me address so it was push mail on my phone. Sure enough I checked a minute later while bringing the phone out of sleep mode and checked the data. It showed just 10kb sent but 1mb received which just doesn't tally with the 4 x 750kb mails received. It just isn't making sense.
    He knows what you asked and has already answered it!
    I thought I had read where the iOS4 (or maybe just the iPhone 4) was supposed to be able to keep wifi connections alive while inactive. If the phone is sitting there on a charger with a wifi connection available, why use the 3G?

  • VA42 user exit to update contract start and end dates at Item level

    Hi  Experts,
                      I need to update contract start and end dates at Item level in 'VA42' transaction, for this i am using user-exit 'USEREXIT_FIELD_MODIFICATION' in the include 'MV45AFZZ'. i am able  to display the data into item level through my coding but the data is not getting updated into 'VEDA'
    Note: No need to change contract start date and end date in header level. Only at item level i want to change dates.
    Thanks,
    Sateesh.

    Thanks For your reply Vikram,
          i tried with 'USEREXIT_MOVE_FIELD_TO_VBAP' user-exit earlier it self its not working. Can you suggest me any another way how we can achieve this functionality. modification of Contract start date and end date in only item level. 
    'USEREXIT_MOVE_FIELD_TO_VBAP':
    FORM USEREXIT_MOVE_FIELD_TO_VBAP.
    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$\SE:(3) Form USEREXIT_MOVE_FIELD_TO_VBAP, Start                                                                                                           A
    *$*$-Start: (3)---------------------------------------------------------------------------------$*$*
    ENHANCEMENT 1  ZSD_CONT_DATE.    "active version
    DATA : lv_var TYPE CHAR10.
      lv_var = '0040000219'.
      if sy-tcode = 'VA42'.
    IF VBAK-VBELN EQ lv_var.
    VEDA-VBEGDAT = '20140502'.
      XVEDA-UPDKZ = 'X'.
    VEDA-VENDDAT = '20140602'.
      XVEDA-UPDKZ = 'X'.
    ENDIF.
    ENDIF.
    ENDENHANCEMENT.

  • VA42 user exit to update contract start and end dates at header

    Hi.
    My requirement : In VA42, if a user changes a contract end date at item level, I want the change to be reflected at header level automatically.
    I have looked in MV45AFZZ, USEREXIT_SAVE_DOCUMENT and USEREXIT_SAVE_DOCUMENT_PREPARE. I am unable to affect the contract end date in those user exits, whatever I put in VEDA-VENDDAT or XVEDA-VENDDAT or whateverVEDA-VENDDAT, does not have any effect on the actual contract dates.
    Can anyone help?
    Please note that we are running 46C.
    Thank you.

    Thanks For your reply Vikram,
          i tried with 'USEREXIT_MOVE_FIELD_TO_VBAP' user-exit earlier it self its not working. Can you suggest me any another way how we can achieve this functionality. modification of Contract start date and end date in only item level. 
    'USEREXIT_MOVE_FIELD_TO_VBAP':
    FORM USEREXIT_MOVE_FIELD_TO_VBAP.
    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$\SE:(3) Form USEREXIT_MOVE_FIELD_TO_VBAP, Start                                                                                                           A
    *$*$-Start: (3)---------------------------------------------------------------------------------$*$*
    ENHANCEMENT 1  ZSD_CONT_DATE.    "active version
    DATA : lv_var TYPE CHAR10.
      lv_var = '0040000219'.
      if sy-tcode = 'VA42'.
    IF VBAK-VBELN EQ lv_var.
    VEDA-VBEGDAT = '20140502'.
      XVEDA-UPDKZ = 'X'.
    VEDA-VENDDAT = '20140602'.
      XVEDA-UPDKZ = 'X'.
    ENDIF.
    ENDIF.
    ENDENHANCEMENT.

  • Period start and end dates

    Hello Experts,
    Can some tell me where we enter the start and end dates of a posting period in a fiscal year which is a year dependent and a non-calendar year?
    For ex: Jan 2008, I have to mention the start and end dates of the fiscal period January, because ours is not a calendar year and so the jan 1st and Jan 31st do not correspond with the January's posting period dates.
    Regards,
    Sriram

    Hi Sriram,
    As Vj suggested, go to transaction OB29.  Then select the fiscal year variant and upon selection the variant, click on "Period".  This will open up dialog box asking for the fiscal year for which you want to configure.  Enter the fiscal year and hit enter.  This will open up the calendar table to enter the period entry which has 4 columns: Month, Day, Period and Year Shift.
    Make sure you are entering the correct Year Shift.  Logic for the Year Shift is as follows.
    +1 if the fiscal year is later than the calendar year
    -1 if the fiscal year is before the calendar year.
    0 if the fiscal year is same as the calendar year.
    One example of year shift:
    Say, if you are configuring the fiscal year 2007 (April 2007 to March 2008), then January 2008 is your 10th period.  Here you hare to enter -1 in Year Shift Column only for January to March (10-12 period) as your fiscal year 2007 is less than the calendar year 2008.
    Hope this helps.
    Pls. award points if this is useful.
    With Regards,
    Chirag

  • Start and End Dates check

    Hi,
    I have a requirement to find the list of persons who have overlapping dates.
    Each person can have many start and End Dates, but only one row that has a NULL end date, the active record. If the start and end dates are overlapped, like in the example below, the second row should have a start date of 24-DEC-2006 and not 22-DEC-2006. Is it possible to list those persons who have overlapping dates/gap in the dates.
    Empl_ID Start Date End Date
    12345 01-JAN-2006 23-DEC-2006
    12345 22-DEC-2006 13-JAN-2007
    12345 14-JAN-2007 NULL
    Any help is greatly appreciated.
    Thanks!

    Hi Patrick
    I like where you are coming from. I hope you don't mind but I have extended your idea slightly to add in a PARTITION BY clause to make sure we look at records for the same person. Also, if we LAG to get a previous record shouldn't we LAG the END_DATE and compare it with the current START_DATE?
    LAG(END_DATE,1) OVER (PARTITION BY EMPL_ID ORDER BY START_DATE)
    Doing this, then the results would look like this:
    Empl_ID Start Date End Date Lag Date
    12345 01-JAN-2006 23-DEC-2006 NULL
    12345 22-DEC-2006 13-JAN-2007 23-DEC-2006
    12345 14-JAN-2007 NULL 13-JAN-2007
    This would give the SIGN an issue because in the first record the LAG would be NULL and in the last record the END_DATE would be NULL. So it looks like some manipulation of NULLs has to take place as well which I will deal with later.
    SIGN((LAG(END_DATE,1) OVER (PARTITION BY EMPL_ID ORDER BY START_DATE)) - START_DATE)
    Anytime the difference between the Lag Date and the Start Date is positive this means this is an overlap which means we do need to look for any variance where the SIGN is 1.
    Using the other function, we could use LEAD like this:
    LEAD(START_DATE,1) OVER (PARTITION BY EMPL_ID ORDER BY START_DATE)
    Doing this, then the results would look like this:
    Empl_ID Start Date End Date Lead Date
    12345 01-JAN-2006 23-DEC-2006 22-DEC-2006
    12345 22-DEC-2006 13-JAN-2007 14-JAN-2007
    12345 14-JAN-2007 NULL NULL
    which when combined with SIGN becomes: SIGN((LEAD(START_DATE,1) OVER (PARTITION BY EMPL_ID ORDER BY START_DATE)) - END_DATE)
    This time you would be looking for the SIGN to be -1
    Personally, I think I would prefer the LEAD function because a) there would always be a START_DATE, and b) we could replace all of the possible NULLs with the SYSDATE to get a final calculation like this:
    SIGN(NVL(LEAD(START_DATE,1) OVER (PARTITION BY EMPL_ID ORDER BY START_DATE),TRUNC(SYSDATE)) - NVL(END_DATE, TRUNC(SYSDATE)))
    Based on the current date being 17-NOV-2009, you would now get this result:
    Empl_ID Start Date End Date Lead Date
    12345 01-JAN-2006 23-DEC-2006 22-DEC-2006
    12345 22-DEC-2006 13-JAN-2007 14-JAN-2007
    12345 14-JAN-2007 17-NOV-2009 17-NOV-2009
    Best wishes
    Michael

  • I cannot stop the activity "Start Deletion of Data in Receiver System"

    Hi all
    I tried to stop the activity "Start Deletion of Data in Receiver System" in my MDC package with the troubleshooting assistant. Unfortunately I get the following error:
    No destination exists for the PACKID:
    Message no. CNV_MBT042
    Have you got an idea, what the problem is? Or how I can stop in a propre different way the activity?
    Thanks a lot for your help
    Roger

    Hi Roger,
    why do you want to stop this phase ?
    Anyway : you can stop the process and than the phase can be restarted at a later stage.
    Regards,
    Eddy

  • Change infopackage scheduling rom Start later in background to immediate

    Hi all,
    I am having the following issue,
    How to make permanent changes to Infopackage which are included in process
    My Infopackage is containing the following setting in Schedule Tab
    1. Start later in background (Immediately)
    This infopackage is included in one process chain.
    I am changing the above setting to “Start Data Load Immediately” and saving it, but when I am opening that infopackage again the setting is going back to Start later in background (Immediately) .
    Please let me know how can I change the setting “Start later in background” (Immediately) to “ start Data load Immediately” perfectly .
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/infopackage-load-immediate-691990
    Please suggest.
    Raj.

    Hey Raj,
    Once you save the job as run in background it cannot be saved back to the run immediate. But that doesnt mean that your job aint set to immediate.
    Infact within the scheduling tab itself you will notice many tabs
    namely
    Immediate
    Date/Time
    Afterjob
    afterevent
    at operation mode etc
    Now observe when you have set it as immediate, as soon as you click on the immediate tab Under Date/time you would see a small faded check box with Immediate start checked. This says that the job would start immediately if you are not going to use the other options.
    Bottom line Start date load immediately and start later in background with
    immediate start checkbox faded gives the same effect unless u are having other specifications set.
    If you click on start with either of the options its going to start immediately. So dont worry abt the radio button being activated for background.
    Thanks
    Raj

  • Report for Validity Start and End Date in PO

    Dear All
    Is there any report where I can get PO validity start and end date which user input in addtional data header tab of PO?
    Regards
    Satish Kumar

    Hi,
    Yes, It is available standard report using T-code ME2N - Purchasing Document (PO) Per Document Number, enter the T-code and provide the following input data's are as follows.
    Scope of List                 :  ALV ( for Ms-Excel format report)
    Plant                               :   __________ to __________ (if required)
    Document Date              : ____________ to ___________ (if Required)
    Execute the report shown by default in excel format and if required PO validity start and end data, you have to select Change Layout button and open new window options screen right side field option as Validity Per.Start, Validity Period End, Commutative number field data's are selected and click <--- arrow button and then click bottom tick marked button. Now, the report shown your requirement.
    Hope, it is useful for you,
    Regards,
    K.Rajendran

  • Start of cycle date is not taking while scheduling

    Hi
    I have created a maintainance plan with scheduling indicator TIME and scheduling period 365 days . I am giving start of cycle date as 04-02-2011 but while scheduling the plan it is taking 19-02-2011 as first plan date . my maintainance plan cycle is 15 days.
    I want that date as 04-02-2011 . how can I get that.
    Regards
    Kumar

    The system is working fine. Once you decide the start cycle date then first plan /Order will come only after the cycle duration from the start cycle date. You can put 15 day before date from 4-2-2011. then you will get first call on desired date.
    Raj

  • My ipod starts voicing song data, artist data, and playlist data while I am listening to music.  Is this a feature or a defect?  I do not know why it occurs, but the only way to stop it is to stop the music then play the playlist again.

    My ipod starts voicing song data, artist data, and playlist data while I am listening to music.  Is this a feature or a defect?  I do not know why it occurs, but the only way to stop it is to stop the music then play the playlist again.

    To make sure voiceover is off, you need to go to summary screen then click the "Configure Universal Access" button. Then you will get a dialog where you can make sure voiceover is off. All of the boxes in the dialog should be unchecked.
    i

  • SNP Planned order start and end dates are not calculated correctly

    Hello SNP Guru's
    The SNP planned orders generated after the Heuristics run, have a start and end date based on the Activity Duration (Fixed), while the resource consumption is based on the Bucket Consumption (Variable), which is correct.
    The Activity Duration (Fixed) is based on the BOM Base Quantity. So if the Activity Duration = 1 day, and if the order quantity is more than a day, the start and end dates, still shows as 1 day. So no matter what is the order quantity, the start and end dates is always = 1 day.
    Does anyone have any experience in implementing any code to change the start and end dates on SNP Planned Order?
    Seems like it should work as standard.
    Am i missing something?
    Thanks,
    Mangesh

    Dear Mangesh,
    SNP is a infinite planning tool. If you have defined fixed duration to be 1 DAY in the activity, no matter how many quantity you input for your planned order, the order will last for one day. If the resourced is overloaded, you then run capacity levelling to
    banlance the capacity. What your expected beahavior happens in PPDS planning.
    Claire

  • Contract Start and End Dates in Sales Order

    Hi
    I have a situation where a service item is bundled with a deliverable item. The order is as follows
    Line Item    Mat                                                                 Qty            Higher Level Item               
    10              Item No.1 (Physical Item)                                  1             
    20              Item No.2 (Service Item)                                    1               10
    For the deliverable item 10 , Revenue is recognized immediately. For the Service item no.20 , revenue needs to be recognized over a period of 1 Year (It is a 1 year service contract).
    The whole order is created via BAPI from an external 3rd party order capture system.
    In order to do revenue recognition properly for service items , SAP I believe has 2 options
    1. Based on Billing plan dates
    2. Based on contract start dates
    Since order with both the line items need to produce 1 invoice, I cannot use billing plan . The only other option is to use contract start and end dates. I have enabled contract data at the sales order level. So when I enter the contract start and end dates manually at the line item level and set the item category to recognize revenue based on contract start and end dates based on time-based revenue recognition it is working fine.
    But I need a way to automate the population of contract start and end dates at the line item level. My ABAP guy is not able to find a user exit that can change the XVEDA or any VEDA structure in any of the user exits.
    I guess the SAP SD gurus out there would have definitely dealt with a situation of product bundling (Service and non-service items in the same sales order with one billing document , but seperate revenue recognition for service and non-service items)
    Please help.
    Thnx
    Siva

    Hi Siva,
    Kindly let me know what criteria you want to give for automatic population of start date of contract...
    Standard SAP comes with a few baseline dates for contract start date and we can control this from customization itself. 
    01     Today's date
    02     Contract start date
    04     Acceptance date
    05     Installation date
    06     Date contract signed
    07     Billing date/Invoice date
    08     CntrctStDate+contract duration
    09     Contract end date
    If you have some criteria which is not covered here, then let me know and i will try to provide some help then.
    Thanks
    Kapil Sharma

Maybe you are looking for

  • BEx workbook Default variant not working with Broadcaster

    Hi, We are broadcasting a BEx workbook, which has more than 1 queries. We have a default variant to populate all the input variables. But while broadcasting, this default variant is not populated sometimes, So the query returns wrong results. It happ

  • Automatic PO at the time of GR

    For Automatic PO at the time of GR when I want to assign the Plant to stanadrd Purchasing Organisation I am not able to do it. I am not able to make any entries. Any guide? Regards

  • 3d length calculation

    I have some road data in Gauß-Krüger zone 5 projection with the associated mean-sea-level heights. I've defined a compound coordinate system taht consists of a vertical and projected coordinate system. Taking the transverse-mercator projection into a

  • Dynamic query in ABAP

    Can we use dynamic query in ABAP?

  • Ring Tones Question

    I just created and purchased a ring tone from within iTunes. Unfortunately, I did not do much research prior to doing this! I do not have an iPhone. I thought I could simply create and purchase a ring tone and send it to my phone (Nokia) much as if I