Early upload of files on iplanet

I have created a servlet that saves uploaded files. A client may upload any
file with any size. I would like to prevent from large files to be uploaded
to my server.
The problem is that by the time the length of the stream could be detected
(using the content length), the whole stream has been already read. The
service method is running only after the entire stream is read so the
streaming could not be blocked.
I have used a sniffer and saw it actually happening before the execution of
the service method.
It is not happening when using the tomcat server.
Can you explain why this is happening and is there any configuration or
other method to overcome this.
Thanks

Shai Kapon wrote:
I have created a servlet that saves uploaded files. A client may upload any
file with any size. I would like to prevent from large files to be uploaded
to my server.
The problem is that by the time the length of the stream could be detected
(using the content length), the whole stream has been already read. The
service method is running only after the entire stream is read so the
streaming could not be blocked.
I have used a sniffer and saw it actually happening before the execution of
the service method.
It is not happening when using the tomcat server.What product are you using? This is not the expected behaviour on iPlanet Web
Server 4.1 or iPlanet Web Server 6.0.

Similar Messages

Uploading larger files in iPlanet 4.1.11

I am using iPlanet 4.1.11 as my web server and WebSphere 4.0.4 as my application server.
I am trying to upload files of size greater than 10MB using multipart in my application. But I can upload files of size less than 10MB. If it is above 10 MB, HTTP connection is closed without any response.
In WebLogic we have maximum post size parameter which can be set to enable uploading larger file. Is there any similar configuration settings in iPlanet or WebSphere? Or is there any relation between file cache and upload size? Is there any hardware limitations? Please help.

I'm not aware of any config settings on iPlanet Webserver side that restrict upload file size. Probably, its something in the application or app server that is causing this..
Note: 4.1 version has reached end of support life, you should consider upgrading to a currently supported web server version.
Thanks
Manish

Not able to upload csv file

I have to to a flat file extraction and the excel file has been converted to the CSV format. but when I execute the infopackage an error crops up in the estimate field that says the value is not an integer, I have earlier uploaded the files using the same settings , what could be the case ?

hi,
while creating infopackage please select file type correctly and check is there any special charecteristics in your file and give seperator with (,) symbol, and check whether you have given all fields lenth correct or not?
thanks,
ramesh.

IPlanet Web Server crashes when uploading a file of size 15 MB

Hi
Setup is iPlanet Web Server 6.0 with iPlanet App Server 6.5. A servlet is used to upload files using multipart form data. The web server restarts itself when tried to upload a huge file (approx 15 MB). The error log says
Catastrophe (600) Web server crashed.
Any help is appreciated
Thanks in advance
Rajesh

yeah its working fine. Thank you very much..
But it would be better if we provide the chunklength rather than using a zero to upload the file fastly.

How to upload XML file from Application server.

Hi,
How to upload XML file from Application server.Please tell me as early as possible.
Regards,
Sagar.

Hi,
parameters : p_file type ibipparms-path obligatory.
***DOWNLOAD---->SAP INTO EXCEL
filename1 = p_file.
call function 'GUI_DOWNLOAD'
exporting
BIN_FILESIZE                    =
    filename                        = filename1
    filetype                        = 'ASC'
APPEND                          = ' '
WRITE_FIELD_SEPARATOR           = 'X'
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
IMPORTING
FILELENGTH                      =
tables
    data_tab                        = it_stock
FIELDNAMES                      =
exceptions
   file_write_error                = 1
   no_batch                        = 2
   gui_refuse_filetransfer         = 3
   invalid_type                    = 4
   no_authority                    = 5
   unknown_error                   = 6
   header_not_allowed              = 7
   separator_not_allowed           = 8
   filesize_not_allowed            = 9
   header_too_long                 = 10
   dp_error_create                 = 11
   dp_error_send                   = 12
   dp_error_write                  = 13
   unknown_dp_error                = 14
   access_denied                   = 15
   dp_out_of_memory                = 16
   disk_full                       = 17
   dp_timeout                      = 18
   file_not_found                  = 19
   dataprovider_exception          = 20
   control_flush_error             = 21
   others                          = 22
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Regards,
Deepthi.

Can't upload any files from my mac to the Internet

I am new to Macbook, and this obviously never happened before
So, the problem is:
I can't upload any files from my Mac anywhere (Facebook, Instagram, etc)
I can't attach files to e-mails.
any files that are on my desktop, folders - they just turn in grey and I can't choose them.
The only way I can do it is by going to "ALL FILES" where I have to search through all the files that are on my Mac
Keep in mind that this is a glitch, because earlier it was all fine and normal
To see what I mean I am uploading a skreen shot of attemp of uploading files to Fb.
Can anybody help? Can it be some sort of virus?

Okay I had the same problem but I figured it out. When you go to choose file, all the links are greyed out. Use two fingers simulatiously and click down on the file you want, then choose "quick look" from the option menu. This will open a preview of your document and make the open button usable. Close the preview, and then select the open button.
The site I was trying to use says it only supports IE, so maybe that is what causes the problem.
Hope it works for you!

UCCX 8.0 "Error while uploading the file. Please try again."

I was on UCCX version 8.0.2.11003-10 and i was able to upload an script with the same name as an old one (overwrite).
Upgrade to UCCX 8.0.2.11004-12 and now I am receiving the error: "Error while uploading the file. Please try again."
There was a bug CSCth09248 that affected version 7 but supposed to be fixed on version 8 and was fixed on an earlier version. But after moving to a minor patch, problem came back...
Any ideas?

Hi,
I belive the bug was initially opened to fix the issue when uploading script fails when using wizard to configure uccx.
But now they have re-opened the same bug instead of opened a new one for the issue that you have.
I looked at the case attached to that bug, case # 617145545. Below is the problem description that customer has which is same as yours and this bug has been re-opened to fix this particular problem.
When I tried to upload a modified script with an existing file name, the message "script file already exists.
Overwrite existing script file, continue?" comes up and when I select "OK" then,
it dispaly Status "Error while uploading the file. Please try again".
If I remove an existing file first, it will upload fine.
Using UCCX Admin 8.0.2.11004-12 and UCCX Editor 8.0(2.0).
Thanks
Ankita

Error in uploading a file in server

Hi,
We are working in a application whose technologies are Flex 4.0 and .Net 2010.
We are using .Net WCF Service for interacting with backend from the Flex front end.
In our application, we have requirement to upload a file from the client into a server.
We faced the following issue,
Security violation Issue #2032.
Solution: We have found that there is a sandbox restriction to access other domains, then we have placed the crossdomain.xml, which resolves the issue.
But this solution works only in the IE.
We are still getting the same error (Error #2032: Stream Error.) in other browsers - FireFox, Chrome and Safari.
Please let us know if there are any suggestions or solutions for this issue.
Regards,
Guru

Siva,
You must apply modifiable binary type in wdDoInit of controller:
ISimpleType stype =
wdContext
    .node<YourNode>()
      .getNodeInfo()
        .getAttribute("FileResource")
          .getModifiableSimpleType();
IWDModifiableBinaryType mtype = (IWDModifiableBinaryType)stype;
/* Optional steps: affects only FileDownload control */
/* mtype.setMimeType( WDWebResourceType.JPG_IMAGE); */
/* mtype.setFileName( "picture.jpg" );               */
Sure, to make above work you must use binary type in context designer.
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

How to upload a file in application server to an internal table

Hi,
      I am asked to upload a file from application server to internal table. Can you please suggest me the ways to do it or the function module which helps to browse the application server file names.
I have done a program. But its giving problem in searching the files from application server. I am pasting my code for ur review. Please tell me which part i have to correct or suggest me some other ways to do it.
*& Report ZUPLOAD1
REPORT ZUPLOAD1.
type-pools: truxs.
parameters: p_upl_ps radiobutton group g1 default 'X', "upload from pres. server
             p_path type rlgrap-filename,
             p_upl_as radiobutton group g1,   "upload from appln server
             <b>p_dir LIKE filepath-pathintern DEFAULT 'Y_ABAP',
             p_file LIKE filepath-pathintern lower case,</b>
             p_test as checkbox.
constants: c_x value 'X',
           c_tab type c value cl_abap_char_utilities=>horizontal_tab.
types: ty_data(1000) type c.    "structure to hold legacy data
data: i_data type standard table of ty_data. "internal table of ty_data
types: begin of stritab,
      land1 type v_t604-land1, "structure of legacy file.
      stawn type v_t604-stawn,
      bemeh type v_t604-bemeh,
      impma type v_t604-impma,
      minol type v_t604-minol,
      end of stritab.
data: gi_itab type standard table of stritab, "internal table of legacy file
      gw_itab type stritab. "work area
data: i_raw type truxs_t_text_data,
      v_fullpath type string.
at selection-screen on value-request for p_path.
if p_upl_ps = c_x. "if presentation server is selected
perform get_file.
else.            "if application server is selected
perform set_file_path.
perform upload_from_server.
perform split_data.
endif.
form get_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
IMPORTING
   FILE_NAME           = p_path.     "getting the file name of pres server
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR          =
    I_LINE_HEADER              = 'X'              "converting excel to sap and filling in
    I_TAB_RAW_DATA             = i_raw      "internal table
    I_FILENAME                 = p_path
TABLES
    I_TAB_CONVERTED_DATA       = gi_itab
EXCEPTIONS
   CONVERSION_FAILED          = 1
   OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
form set_file_path.                 "Getting the file path of application server
data: lv_file type p_file.
      lv_file = p_file.
      CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
        EXPORTING
        CLIENT                           = SY-MANDT
          LOGICAL_PATH                     = p_dir
        OPERATING_SYSTEM                 = SY-OPSYS
        PARAMETER_1                      = ' '
        PARAMETER_2                      = ' '
        PARAMETER_3                      = ' '
        USE_BUFFER                       = ' '
          FILE_NAME                        = lv_file
        USE_PRESENTATION_SERVER          = ' '
        ELEMINATE_BLANKS                 = 'X'
       IMPORTING
         FILE_NAME_WITH_PATH              = v_fullpath
       EXCEPTIONS
         PATH_NOT_FOUND                   = 1
         MISSING_PARAMETER                = 2
         OPERATING_SYSTEM_NOT_FOUND       = 3
         FILE_SYSTEM_NOT_FOUND            = 4
         OTHERS                           = 5
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
endform.
form upload_from_server.
data: lv_msg type string,
      lw_data type ty_data.
open dataset v_fullpath for input message lv_msg in text mode encoding default.
if sy-subrc <> 0.
message lv_msg type 'i'.
stop.
endif.
do.
read dataset v_fullpath into lw_data.
if sy-subrc <> 0.
write:/5 'Error in processign data set'.
exit.
endif.
append lw_data to i_data.
enddo.
close dataset v_fullpath.
if sy-subrc <> 0.
write: /5 'Error closing dataset'.
endif.
endform.
form split_data.
data: lw_data type ty_data.
data: lw_itab type stritab.
data: begin of ty_itab,
      land1 type v_t604-land1,
      stawn type v_t604-stawn,
      bemeh type v_t604-bemeh,
      impma type v_t604-impma,
      minol type v_t604-minol,
      end of ty_itab.
loop at i_data into lw_data.
split lw_data at c_tab into
      ty_itab-land1
      ty_itab-stawn
      ty_itab-bemeh
      ty_itab-impma
      ty_itab-minol.
lw_itab-land1 = ty_itab-land1.
lw_itab-stawn = ty_itab-stawn.
lw_itab-bemeh = ty_itab-bemeh.
lw_itab-impma = ty_itab-impma.
lw_itab-minol = ty_itab-minol.
append lw_itab to gi_itab.
endloop.
endform.
start-of-selection.
loop at gi_itab into gw_itab.
write: /5 'COUNTRY', 'IMPORT CODE', 'SUP UNIT', 'FIRST UOM', 'SECOND UOM',
       /5 gw_itab-land1, gw_itab-stawn,gw_itab-bemeh,gw_itab-impma,gw_itab-minol.
endloop.
end-of-selection.
I hope problem must be in p_dir and p_file which are in bold.. Kindly help me out. Thanks in advance.

see the following ex:
*&      Form SUB_GET_FILEPATH
      text
--> p1        text
<-- p2        text
FORM SUB_GET_FILEPATH .
    GFILE = 'D:\SAP_INT\INBOUND\INBOX'. "Path
ENDFORM.                    " SUB_GET_FILEPATH
*&      Form SUB_GET_FILE
      text
--> p1        text
<-- p2        text
FORM SUB_GET_FILE .
DATA: P_FDIR(200) TYPE C.
DATA: IT_FILEDIR1 TYPE STANDARD TABLE OF TY_FILEDIR WITH HEADER LINE.
P_FDIR = GFILE.
CALL FUNCTION 'RZL_READ_DIR_LOCAL'
    EXPORTING
      NAME     = P_FDIR
    TABLES
      FILE_TBL = IT_FILEDIR.
REFRESH : IT_FILEDIR1.
LOOP AT IT_FILEDIR.
    IF IT_FILEDIR-NAME(4) = 'ZINC' OR IT_FILEDIR-NAME(4) = 'zinc'.
      MOVE IT_FILEDIR-NAME TO IT_FILEDIR1-NAME.
      APPEND IT_FILEDIR1.
    ENDIF.
ENDLOOP.
IF IT_FILEDIR1[] IS INITIAL.
    STOP.
ENDIF.
LOOP AT IT_FILEDIR1.
    REFRESH: I_TAB.
    CLEAR: I_TAB.
    NAME = IT_FILEDIR1-NAME.
    CONCATENATE: GFILE '\' NAME INTO G_FILE.
    OPEN DATASET G_FILE FOR INPUT IN TEXT MODE
                                     ENCODING DEFAULT
                                     IGNORING CONVERSION ERRORS.
    IF SY-SUBRC EQ 0.
      CONCATENATE 'FILENAME : ' G_FILE INTO I_MSG1.
      APPEND I_MSG1.
      DO.
        READ DATASET G_FILE INTO RECORD.
        IF SY-SUBRC = 0.
          SPLIT RECORD AT ',' INTO I_TAB-BUKRS I_TAB-EBELN
              I_TAB-BLDAT I_TAB-XBLNR I_TAB-LIFNR I_TAB-AMOUNT
              I_TAB-CURR I_TAB-BUSAREA
              I_TAB-BKTXT I_TAB-DMBTR I_TAB-MENGE I_TAB-SRNO.
          MOVE-CORRESPONDING I_TAB TO I_TAB1.
        ELSE.
          EXIT.
        ENDIF.
        APPEND I_TAB1.
        CLEAR: I_TAB, I_TAB1.
      ENDDO.
    ENDIF.
    CLOSE DATASET G_FILE.

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

Error while uploading WSDL file in Interactive Form Data Connection!

I have created we service to return some data based on user input.
I am trying to link this webservice to Interactive adobe form! and While creating new data connection->uploading WSDL file--> I am receiving error i.e. Invalid File.
Please help me in resolving this issue.
I have created this WSDL file copy/pasting XML code generates from "Open WSDL document for selected binding" link in SOAMANAGER.
Regards,
Naveen.I

Hello,
This is a Webservice created for the FM : HRXSS_PER_READ_EMERGENCY_AR
Here is the sample of the WSDL file generated, as asked by you.
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions targetNamespace="urn:sap-com:document:sap:soap:functions:mc-style" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="urn:sap-com:document:sap:soap:functions:mc-style" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:n1="urn:sap-com:document:sap:rfc:functions">
- <wsdl:documentation>
<sidl:sidl xmlns:sidl="http://www.sap.com/2007/03/sidl" />
</wsdl:documentation>
<wsp:UsingPolicy wsdl:required="true" />
- <wsp:Policy wsu:Id="BN_BN_ZHR_READ_EMERGENCY">
<saptrnbnd:OptimizedXMLTransfer uri="http://xml.sap.com/2006/11/esi/esp/binxml" xmlns:saptrnbnd="http://www.sap.com/webas/710/soap/features/transportbinding/" wsp:Optional="true" />
<saptrnbnd:OptimizedXMLTransfer uri="http://www.w3.org/2004/08/soap/features/http-optimization" xmlns:saptrnbnd="http://www.sap.com/webas/710/soap/features/transportbinding/" wsp:Optional="true" />
- <wsp:ExactlyOne xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:sapsp="http://www.sap.com/webas/630/soap/features/security/policy" xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsa="http://www.w3.org/2005/08/addressing" xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility">
- <wsp:All>
- <sp:TransportBinding>
- <wsp:Policy>
- <sp:TransportToken>
- <wsp:Policy>
<sp:HttpsToken />
</wsp:Policy>
</sp:TransportToken>
- <sp:AlgorithmSuite>
- <wsp:Policy>
<sp:TripleDesRsa15 />
</wsp:Policy>
</sp:AlgorithmSuite>
- <sp:Layout>
- <wsp:Policy>
<sp:Strict />
</wsp:Policy>
</sp:Layout>
</wsp:Policy>
</sp:TransportBinding>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
- <wsp:Policy wsu:Id="IF_IF_ZHR_READ_EMERGENCY">
- <sapsession:Session xmlns:sapsession="http://www.sap.com/webas/630/soap/features/session/">
<sapsession:enableSession>false</sapsession:enableSession>
</sapsession:Session>
<sapcentraladmin:CentralAdministration xmlns:sapcentraladmin="http://www.sap.com/webas/700/soap/features/CentralAdministration/" wsp:Optional="true" />
</wsp:Policy>
- <wsp:Policy wsu:Id="OP_IF_OP_HrxssPerReadEmergencyAr">
<sapcomhnd:enableCommit xmlns:sapcomhnd="http://www.sap.com/NW05/soap/features/commit/">false</sapcomhnd:enableCommit>
<sapblock:enableBlocking xmlns:sapblock="http://www.sap.com/NW05/soap/features/blocking/">true</sapblock:enableBlocking>
<saptrhnw05:required xmlns:saptrhnw05="http://www.sap.com/NW05/soap/features/transaction/">no</saptrhnw05:required>
<saprmnw05:enableWSRM xmlns:saprmnw05="http://www.sap.com/NW05/soap/features/wsrm/">false</saprmnw05:enableWSRM>
</wsp:Policy>
- <wsdl:types>
- <xsd:schema attributeFormDefault="qualified" targetNamespace="urn:sap-com:document:sap:rfc:functions">
- <xsd:simpleType name="char1">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
"More simple types
<xsd:pattern value="\d*" />
</xsd:restriction>
</xsd:simpleType>
</xsd:schema>
- <xsd:schema attributeFormDefault="qualified" targetNamespace="urn:sap-com:document:sap:soap:functions:mc-style" xmlns:n0="urn:sap-com:document:sap:rfc:functions">
<xsd:import namespace="urn:sap-com:document:sap:rfc:functions" />
- <xsd:complexType name="Bapiret2">
- <xsd:sequence>
"More element names
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="Messages" type="tns:Bapirettab" />
<xsd:element name="Records" type="tns:HcmtBspPaArR0006Tab" />
<xsd:element name="Records2" type="tns:HcmtBspPaArR0021Tab" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="HrxssPerReadEmergencyAr">
<wsdl:part name="parameters" element="tns:HrxssPerReadEmergencyAr" />
</wsdl:message>
- <wsdl:message name="HrxssPerReadEmergencyArResponse">
<wsdl:part name="parameter" element="tns:HrxssPerReadEmergencyArResponse" />
</wsdl:message>
- <wsdl:portType name="ZHR_READ_EMERGENCY">
- <wsp:Policy>
<wsp:PolicyReference URI="#IF_IF_ZHR_READ_EMERGENCY" />
</wsp:Policy>
- <wsdl:operation name="HrxssPerReadEmergencyAr">
- <wsp:Policy>
<wsp:PolicyReference URI="#OP_IF_OP_HrxssPerReadEmergencyAr" />
</wsp:Policy>
<wsdl:input message="tns:HrxssPerReadEmergencyAr" />
<wsdl:output message="tns:HrxssPerReadEmergencyArResponse" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ZHR_READ_EMERGENCY" type="tns:ZHR_READ_EMERGENCY">
- <wsp:Policy>
<wsp:PolicyReference URI="#BN_BN_ZHR_READ_EMERGENCY" />
</wsp:Policy>
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
- <wsdl:operation name="HrxssPerReadEmergencyAr">
<soap:operation soapAction="" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="service">
- <wsdl:port name="ZHR_READ_EMERGENCY" binding="tns:ZHR_READ_EMERGENCY">
<soap:address location="http://cieh4-srvr.collabera.com:8000/sap/bc/srt/rfc/sap/zhr_read_emergency/900/zhr_read_emergency/zhr_read_emergency" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Cheers,
Remi

Error while uploading the file from Allpcation server in LSMW-7th step

Hi Experts,
what should be the specific CODE PAGE should be maintained while uploading the file from application server in LSMW-7th Step
Thanks in advance,
KSR

Hi
I mean that there is any seperate CODE PAGE which comes at the bottom of screen while uploading the file from the application server in 7th step.
Is there any specific CODE PAGE to be maintained...
Thanks in advance
Oarsk

Unable to upload video files via iframe in safari version 3.0

I m not able 2 upload video files via iframe in safari 3.0.
i m facing this issue when i try 2 upload a video file via an iframe.
file gets uploaded properly if i m not using iframe to upload the same.
this issue is seen only in safari version 3.0 and not in the newer version i.e (3.2.1)
do anyone has the asnwer for this problem.....???
would be thankful to him/her...

Are you using a BT Home Hub with the IP Phone attached. This holds onto the SIP port that iChat uses. There is no way to get the router to release this port.
I had to return it all to BT as unfit for purpose and switched to Eclipse!

Upload multiple files WITH correct pairs of form fields into Database

In my form page, I would like to allow 3 files upload and 3 corresponding text fields, so that the filename and text description can be saved in database table in correct pair. Like this:
INSERT INTO table1 (filename,desc) VALUES('photo1.jpg','happy day');
INSERT INTO table1 (filename,desc) VALUES('photo2.jpg','fire camp');
INSERT INTO table1 (filename,desc) VALUES('photo3.jpg','christmas night');
However, using the commons fileupload, http://commons.apache.org/fileupload/, I don't know how to reconstruct my codes so that I can acheieve this result.
if(item.isFormField()){
}else{
}I seems to be restricted from this structure.
The jsp form page
<input type="text" name="description1" value="" />
<input type="file" name="sourcefile" value="" />
<input type="text" name="description2" value="" />
<input type="file" name="sourcefile" value="" />The Servlet file
package Upload;
import sql.*;
import user.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.Map;
import java.util.HashMap;
import java.util.Date;
import java.util.List;
import java.util.Iterator;
import java.io.File;
import java.io.PrintWriter;
import java.io.IOException;
import java.text.SimpleDateFormat;
import org.apache.commons.fileupload.servlet.ServletFileUpload;
import org.apache.commons.fileupload.disk.DiskFileItemFactory;
import org.apache.commons.fileupload.*;
public class UploadFile extends HttpServlet {
private String fs;
private String category = null;
private String realpath = null;
public String imagepath = null;
public PrintWriter out;
private Map<String, String> formfield = new HashMap<String, String>();
//Initialize global variables
public void init(ServletConfig config, ServletContext context) throws ServletException {
    super.init(config);
//Process the HTTP Post request
public void doPost(HttpServletRequest request,HttpServletResponse response) throws ServletException, IOException {
    request.setCharacterEncoding("utf-8");
    response.setCharacterEncoding("utf-8");
    response.setContentType("text/html");
    PrintWriter out = response.getWriter();
    Thumbnail thumb = new Thumbnail();
    fs = System.getProperty("file.separator");
    this.SetImagePath();
     boolean isMultipart = ServletFileUpload.isMultipartContent(request);
     if(!isMultipart){
      out.print("not multiple part.");
     }else{
         FileItemFactory factory = new DiskFileItemFactory();
         ServletFileUpload upload = new ServletFileUpload(factory);
         List items = null;
         try{
            items = upload.parseRequest(request);
         } catch (FileUploadException e) {
            e.printStackTrace();
         Iterator itr = items.iterator();
         while (itr.hasNext()) {
           FileItem item = (FileItem) itr.next();
           if(item.isFormField()){
              String formvalue = new String(item.getString().getBytes("ISO-8859-1"), "utf-8");
              formfield.put(item.getFieldName(),formvalue);
              out.println("Normal Form Field, ParaName:" + item.getFieldName() + ", ParaValue: " + formvalue + "<br/>");
           }else{
             String itemName = item.getName();
             String filename = GetTodayDate() + "-" + itemName;
             try{
               new File(this.imagepath + formfield.get("category")).mkdirs();
               new File(this.imagepath + formfield.get("category")+fs+"thumbnails").mkdirs();
               //Save the file to the destination path
               File savedFile = new File(this.imagepath + formfield.get("category") + fs + filename);
               item.write(savedFile);
               thumb.Process(this.imagepath + formfield.get("category") +fs+ filename,this.imagepath + formfield.get("category") +fs+ "thumbnails" +fs+ filename, 25, 100);
               DBConnection db = new DBConnection();
               String sql = "SELECT id from category where name = '"+formfield.get("category")+"'";
               db.SelectQuery(sql);
                while(db.rs.next()){
                  int cat_id = db.rs.getInt("id");
                  sql = "INSERT INTO file (cat_id,filename,description) VALUES ("+cat_id+",'"+filename+"','"+formfield.get("description")+"')";
                  out.println(sql);
                  db.RunQuery(sql);
             } catch (Exception e){
                e.printStackTrace();
        HttpSession session = request.getSession();
        UserData k = (UserData)session.getAttribute("userdata");
        k.setMessage("File Upload successfully");
        response.sendRedirect("./Upload.jsp");
//Get today date, it is a test, actually the current date can be retrieved from SQL
public String GetTodayDate(){
    SimpleDateFormat format = new SimpleDateFormat("yyyyMMdd");
    String today = format.format(new Date());
    return today;
//Set the current RealPath which the file calls for this file
public void SetRealPath(){
    this.realpath = getServletConfig().getServletContext().getRealPath("/");
public void SetImagePath(){
    this.SetRealPath();
    this.imagepath = this.realpath + "images" +fs;
}Can anyone give me some code suggestion? Thx.

When one hits the submit button - I then get a 404 page error.What is the apaches(?) error log saying? Mostly you get very useful information when looking into the error log!
In any case you may look at how you are Uploading Multiple Files with mod_plsql.

Trying to get lighttpd to upload a file through perl cgi

Hi, I'm quite new in these things, so I might be doing something obvious wrong, but I'd like some help on this.
I'm trying to make a webpage where people can upload files, this is the html page (located at /srv/html/index.html):
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>lighttpd Test Page</title>
</head>
<body>
<div style="text-align:center; font: 12px sans-serif;">
<span style="font-weight: bold; font-size: 20px;">
Arch Linux
</span>
<br><br>
This is a test page for the lighttpd Web Server.<br>
<form action="/cgi-bin/upload.pl" method="post" enctype="multipart/form-data">
<input type="file" name="fileName" size="40">
<input type="submit" value="Send">
<input type="reset">
</form>
</div>
</body>
</html>
And the backend (in /srv/html/cgi-bin/upload.pl):
#!/usr/bin/perl -wT
use strict;
use CGI;
use CGI::Carp qw ( fatalsToBrowser );
use File::Basename;
$CGI::POST_MAX = 1024 * 1024 * 5000; # 5GB filesize limit
my $safe_filename_characters = "a-zA-Z0-9_.-";
my $upload_dir = "/srv/jail/";
my $query = new CGI;
my $filename = $query->param("fileName");
if ( !$filename )
print $query->header ( );
print "There was a problem uploading your file (filesize limit may be exceeded).";
exit;
my ( $name, $path, $extension ) = fileparse ( $filename, '\..*' );
$filename = $name . $extension;
$filename =~ tr/ /_/;
$filename =~ s/[^$safe_filename_characters]//g;
if ( $filename =~ /^([$safe_filename_characters]+)$/ )
$filename = $1;
else
die "Filename contains invalid characters";
my $upload_filehandle = $query->upload("fileName");
open ( UPLOADFILE, ">$upload_dir/$filename" ) or die "$!";
binmode UPLOADFILE;
while ( <$upload_filehandle> )
print UPLOADFILE;
close UPLOADFILE;
print $query->header ( );
print <<END_HTML;
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Done!</title>
</head>
<body>
<p>Uploading done!</p>
</body>
</html>
END_HTML
My server config:
# lighttpd configuration file
# use it as a base for lighttpd 1.0.0 and above
# $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
############ Options you really have to take care of ####################
## modules to load
# at least mod_access and mod_accesslog should be loaded
# all other module should only be loaded if really neccesary
# - saves some time
# - saves memory
server.modules = (
# "mod_rewrite",
# "mod_redirect",
# "mod_alias",
"mod_access",
# "mod_cml",
# "mod_trigger_b4_dl",
# "mod_auth",
# "mod_status",
# "mod_setenv",
# "mod_fastcgi",
# "mod_proxy",
# "mod_simple_vhost",
# "mod_evhost",
# "mod_userdir",
"mod_cgi",
# "mod_compress",
# "mod_ssi",
# "mod_usertrack",
# "mod_expire",
# "mod_secdownload",
# "mod_rrdtool",
"mod_accesslog" )
## a static document-root, for virtual-hosting take look at the
## server.virtual-* options
server.document-root = "/srv/http/"
## where to send error-messages to
server.errorlog = "/var/log/lighttpd/error.log"
# files to check for if .../ is requested
index-file.names = ( "index.php", "index.html",
"index.htm", "default.htm" )
## set the event-handler (read the performance section in the manual)
# server.event-handler = "freebsd-kqueue" # needed on OS X
# mimetype mapping
mimetype.assign = (
".pdf" => "application/pdf",
".sig" => "application/pgp-signature",
".spl" => "application/futuresplash",
".class" => "application/octet-stream",
".ps" => "application/postscript",
".torrent" => "application/x-bittorrent",
".dvi" => "application/x-dvi",
".gz" => "application/x-gzip",
".pac" => "application/x-ns-proxy-autoconfig",
".swf" => "application/x-shockwave-flash",
".tar.gz" => "application/x-tgz",
".tgz" => "application/x-tgz",
".tar" => "application/x-tar",
".zip" => "application/zip",
".mp3" => "audio/mpeg",
".m3u" => "audio/x-mpegurl",
".wma" => "audio/x-ms-wma",
".wax" => "audio/x-ms-wax",
".ogg" => "application/ogg",
".wav" => "audio/x-wav",
".gif" => "image/gif",
".jar" => "application/x-java-archive",
".jpg" => "image/jpeg",
".jpeg" => "image/jpeg",
".png" => "image/png",
".xbm" => "image/x-xbitmap",
".xpm" => "image/x-xpixmap",
".xwd" => "image/x-xwindowdump",
".css" => "text/css",
".html" => "text/html",
".htm" => "text/html",
".js" => "text/javascript",
".asc" => "text/plain",
".c" => "text/plain",
".cpp" => "text/plain",
".log" => "text/plain",
".conf" => "text/plain",
".text" => "text/plain",
".txt" => "text/plain",
".dtd" => "text/xml",
".xml" => "text/xml",
".mpeg" => "video/mpeg",
".mpg" => "video/mpeg",
".mov" => "video/quicktime",
".qt" => "video/quicktime",
".avi" => "video/x-msvideo",
".asf" => "video/x-ms-asf",
".asx" => "video/x-ms-asf",
".wmv" => "video/x-ms-wmv",
".bz2" => "application/x-bzip",
".tbz" => "application/x-bzip-compressed-tar",
".tar.bz2" => "application/x-bzip-compressed-tar",
# default mime type
"" => "application/octet-stream",
# Use the "Content-Type" extended attribute to obtain mime type if possible
#mimetype.use-xattr = "enable"
## send a different Server: header
## be nice and keep it at lighttpd
# server.tag = "lighttpd"
#### accesslog module
accesslog.filename = "/var/log/lighttpd/access.log"
## deny access the file-extensions
# ~ is for backupfiles from vi, emacs, joe, ...
# .inc is often used for code includes which should in general not be part
# of the document-root
url.access-deny = ( "~", ".inc" )
$HTTP["url"] =~ "\.pdf$" {
server.range-requests = "disable"
# which extensions should not be handle via static-file transfer
# .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
######### Options that are good to be but not neccesary to be changed #######
## bind to port (default: 80)
server.port = ###
## bind to localhost (default: all interfaces)
#server.bind = "127.0.0.1"
## error-handler for status 404
#server.error-handler-404 = "/error-handler.html"
#server.error-handler-404 = "/error-handler.php"
## to help the rc.scripts
server.pid-file = "/var/run/lighttpd/lighttpd.pid"
###### virtual hosts
## If you want name-based virtual hosting add the next three settings and load
## mod_simple_vhost
## document-root =
## virtual-server-root + virtual-server-default-host + virtual-server-docroot
## or
## virtual-server-root + http-host + virtual-server-docroot
#simple-vhost.server-root = "/srv/http/vhosts/"
#simple-vhost.default-host = "www.example.org"
#simple-vhost.document-root = "/htdocs/"
## Format: <errorfile-prefix><status-code>.html
## -> ..../status-404.html for 'File not found'
#server.errorfile-prefix = "/usr/share/lighttpd/errors/status-"
#server.errorfile-prefix = "/srv/http/errors/status-"
## virtual directory listings
#dir-listing.activate = "enable"
## enable debugging
#debug.log-request-header = "enable"
#debug.log-response-header = "enable"
#debug.log-request-handling = "enable"
#debug.log-file-not-found = "enable"
### only root can use these options
# chroot() to directory (default: no chroot() )
#server.chroot = "/"
## change uid to <uid> (default: don't care)
server.username = "http"
## change uid to <uid> (default: don't care)
server.groupname = "http"
#### compress module
#compress.cache-dir = "/var/cache/lighttpd/compress/"
#compress.filetype = ("text/plain", "text/html")
#### proxy module
## read proxy.txt for more info
#proxy.server = ( ".php" =>
# ( "localhost" =>
# "host" => "192.168.0.101",
# "port" => 80
#### fastcgi module
## read fastcgi.txt for more info
## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini
#fastcgi.server = ( ".php" =>
# ( "localhost" =>
# "socket" => "/var/run/lighttpd/php-fastcgi.socket",
# "bin-path" => "/usr/bin/php-cgi"
#### CGI module
cgi.assign = ( ".pl" => "/usr/bin/perl",
".cgi" => "/usr/bin/perl" )
#### SSL engine
#$SERVER["socket"] == "0.0.0.0:443" {
ssl.engine = "enable"
ssl.pemfile = "/etc/ssl/private/lighttpd.pem"
# server.errorlog = "/var/log/lighttpd/error-ssl.log"
# accesslog.filename = "/var/log/lighttpd/access-ssl.log"
# server.document-root = "/home/lighttpd/html-ssl"
#### status module
#status.status-url = "/server-status"
#status.config-url = "/server-config"
#### auth module
## read authentication.txt for more info
#auth.backend = "plain"
#auth.backend.plain.userfile = "lighttpd.user"
#auth.backend.plain.groupfile = "lighttpd.group"
#auth.backend.ldap.hostname = "localhost"
#auth.backend.ldap.base-dn = "dc=my-domain,dc=com"
#auth.backend.ldap.filter = "(uid=$)"
#auth.require = ( "/server-status" =>
# "method" => "digest",
# "realm" => "download archiv",
# "require" => "user=jan"
# "/server-config" =>
# "method" => "digest",
# "realm" => "download archiv",
# "require" => "valid-user"
#### url handling modules (rewrite, redirect, access)
#url.rewrite = ( "^/$" => "/server-status" )
#url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" )
#### both rewrite/redirect support back reference to regex conditional using %n
#$HTTP["host"] =~ "^www\.(.*)" {
# url.redirect = ( "^/(.*)" => "http://%1/$1" )
# define a pattern for the host url finding
# %% => % sign
# %0 => domain name + tld
# %1 => tld
# %2 => domain name without tld
# %3 => subdomain 1 name
# %4 => subdomain 2 name
#evhost.path-pattern = "/srv/http/vhosts/%3/htdocs/"
#### expire module
#expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes")
#### ssi
#ssi.extension = ( ".shtml" )
#### rrdtool
#rrdtool.binary = "/usr/bin/rrdtool"
#rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd"
#### setenv
#setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" )
#setenv.add-response-header = ( "X-Secret-Message" => "42" )
## for mod_trigger_b4_dl
# trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db"
# trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
# trigger-before-download.trigger-url = "^/trigger/"
# trigger-before-download.download-url = "^/download/"
# trigger-before-download.deny-url = "http://127.0.0.1/index.html"
# trigger-before-download.trigger-timeout = 10
## for mod_cml
## don't forget to add index.cml to server.indexfiles
# cml.extension = ".cml"
# cml.memcache-hosts = ( "127.0.0.1:11211" )
#### variable usage:
## variable name without "." is auto prefixed by "var." and becomes "var.bar"
#bar = 1
#var.mystring = "foo"
## integer add
#bar += 1
## string concat, with integer cast as string, result: "www.foo1.com"
#server.name = "www." + mystring + var.bar + ".com"
## array merge
#index-file.names = (foo + ".php") + index-file.names
#index-file.names += (foo + ".php")
#### include
#include /etc/lighttpd/lighttpd-inc.conf
## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf"
#include "lighttpd-inc.conf"
#### include_shell
#include_shell "echo var.a=1"
## the above is same as:
#var.a=1
The site is running over https with a self signed ssl-cert, if that matters. If I try to upload a file, the browser just quickly reloades the page, the filename still in the input field. The file isn't uploaded and the page that the script should display when completed doesn't show neither.
Does anyone know how to troubleshoot this? I'm not getting any errors, it just doesn't work..

I haven't used Websphere before so I can't say much about that. Try putting <%@ page language="Java" %> at the top of your jsp page.
Try putting your java files into a package and see if that helps. I read somewhere that Tomcat once had issues with running classes that weren't in a package. Make sure to put the package statement at the top of your Java files if you do.
Websphere says it caught an unhandled exception. Instead of having your method throw and Exception put your code in a try-catch block and then print a stack trace to see if it says anything when it trys to read and write data.
Try{
    PrintWriter pw = new PrintWriter(new BufferedWriter(new FileWriter("doUpload.txt")));
    ServletInputStream in = request.getInputStream();
    int a=0;
    a=in.read();
    while (a!= -1){
        pw.print((char) a);
        a=in.read();
    pw.close();
}catch(Exception e){
e.printStackTrace();
}Sorry I can't really give you more help.
-S-

Early upload of files on iplanet

Similar Messages

Maybe you are looking for