Early warning system using S026 infostructure

hi all
I am trying to use Early Warning system in SAP and have created an exception ZFTEST using infostructure S026. My key figures are Quantity withdrawn and Requirement qty. When I am defining requirement I want to use a 'Plan/actual' analysis. When I go to define this it asks for a 'define a valid plan/actual' planning version for S026. Where do i define this version.
Thanks a lot

Hi John,
Please check this online document perhaps it may help.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLIS/LOLIS_FRÜHWARNSYSTEM.pdf
Regards,
Ferry Lianto

Similar Messages

Early warning system - S226

Hi all
I am using the early warning system exception analysis tcode MCY1. I am using infostructure S226. I want to define requirements using plan/actual comparison method. I want to create a exception using 'withdrawl qty' and 'requirement qty'. The requirement definition asks for a planning version. where and how do I define a planning version?
thanks a lot

Hi John
Planning version , from MD61 define version try to give wat ever version you haev given in your PIR
Thanks
Bala

Exception value in early warning system.

Dear all,
We are using R/3 4.7. My user has a condition in which for every 10,000 numbers made as goods reciept from production (101) movement , system should trigger a mail to the respective user i.d. I tried to create this condition using early warning system. I could not define the condition i.e., every 10,000 numbers.
There is possibility to provided >,<,= etc., but how to define the condition that for every 10,000 numbers system should trigger mail.
Experts help and guidance expected.
Regards,
M.M

There is no reply for this message hence marked as answered

Early warning system, PM Module

Dear Experts,
Plz thrgh some light on Early warning system? Do send some config details if possible.
Thanks in advance
DM

Deepak,
EWS is basicaly a part of the logistics Information system, that would help you to send a email whenever your predefined parameters are reached. so that you dont have to keep monitoring them on a regular basis.
Bascially the standrad functionality contains characteritic and values, that you could use to define your parameters. Then you would need to schedule this particular job to run on a regular interval,say daily, weekly, monthly etc.
Hope this intro helps.
Thanks
Narasimhan

Early warning system for inventory management,

Dear Friends,
I had an issue related to early warning system for inventory management, i.e, if the stock goes below the specified level the system should trigger the mail.
Pls. explain how to configure
regards
Suresh

Solved

Early warning system for monitoring authorizations

Hi,
I have heard about a "system" that can monitor authorizations on the R/3 system called "Early Warning" (suposedly). Is there any functionality fir this on Netweaver platform? The client wants to recieve mail/SMS/notification if users are granted authorizations outside what is expected. we do not want to create rules for this, as it should be allowed - but carefullt monitored.
hope someone has a good idea.
regards,
bjorn

Solved

Early Warning systems(URGENT)

Dear Friends,
I am configuring early warninf system for inventory management, i.e, if the stock goes below the specified level the system should trigger the mail.
The problem is that I am not able to trigger maild to my users. Can anyone explain the process to trigger mails.
Best regards,
Arahanth

Fico2014Guy wrote:
Broke_Triathlete wrote:
I have ordered both of these reports and I know (credit curiosity can verify) that BOA reports to EWS. They literally had a running log of my checking and savings accounts BY TRANSACTION. I could literally tell when my account got hacked. It's sickening. I didn't authorize that. I will never use BOA again because of that. You can't freeze EWS either...Wow! That is scary. I am glad I closed my accounts with BOA a long time ago. I am still on the fence about giving EWS my personal information in order to get my consumer report with them. I just don't feel comfortable giving them all of that stuff, especially hearing all of the bad stories about them on the web. In addition, they even said they require a consumer to mail or fax in a copy of their driver's license to them in order to get the report.It's sickening isn't it?? I'm glad I'm not with BOA anymore either.

Early warning system

Hi All,
I am configuring EWS for inventory. I am trying to schedule the exception using tcode MC/B but its showing an error message 'no periodic analysis for exception exists' message number MZ059
I have activated the checkbox ' active for periodic analysis'
Please guide
Thanks and Regards
Pavan

First create the Exception in MC/1
In this exception - click on requirement and enter your requirement
then follow up processing - maintain here
now go to MC/8 - maintian variant here
now you scheduile in MC/B

Early Warning System directory

Usually the EWS directory for the week is posted by end of day on Thursdays. It is now Friday afternoon (West Coast US), and the weekly directory does not appear to have been posted. Will it be posted soon?

Kelly,
There was some issues posting the files last week. It appears that it has posted this morning but may take a few hours to show up on your end. Please let me know if you don't see it by mid afternoon.
Thanks,
Kendra

Early Warning System setup for items below Reorder Point

Hello,
I am looking for information regarding the EWS for items falling below Reorder Point. It is my understanding this can be setup with an email notification as well. My issue is my plant runs 24/7 and my maintenance crew on the weekends could benefit from receiving notifications in real time on items that need to be rebuilt which we may have in the repair room. this will give the Shift Supervisor a better idea of how to manage the repair of the machine. This will also help our overall purchasing practice in general.
Thank you for your time and attention!
Bill Lewis

Solved

Early warning for QM specs close to limits

Hi Experts,
I am currently trying to figure a way to get a notification of a quantitative characteristic getting close to specification limits so that the problem can be addressed before failures occur. Here is the scenario:
pH is measured for each batch with spec 7.1-7.5. Each batch has one inspection lot.
It has been noticed that when a batch fails this spec, the previous batches increase or decrease closer to the limits until a batch fails. To decrease batch failure, it is desirable to have a warning for when a batch reaches, for example 7.2 or 7.4. This batch would not fail the specs, but will give an early warning so that the process can be adjusted to avoid the failure of future batches.
I have been looking at control charts, but we do not use a fixed batch size (which I believe is required) and this seems a little complicated for what we need.
I have also toyed with the idea of an ABAP report that uses the additional pairs of limits in the quantitative view of the inspection plan to pick out which batches are outside these values and report them in a list so they can be investigated. Although I cannot see how I can get a warning out from this to notify users of the occurrence. I am familiar with Workflow, but cannot see where the trigger will come from as the spec will have passed.
Although I think that the report would be useful for this, the users really want a warning without having to interrogate the system to find it.
Kind regards
Andrew

I think you can acheive this functionality by using Early Warning System (R/3) or the Business Process Monitoring (BPM) - Sol.Manager.
I dont have experince in implementing both of them, but we are exploring BPM for some of our shop floor threshold tirggers.
Thanks,
Ram

Anyone dealt with Early Warning Services? Can't get a bank account. Help!

Hi Everyone, Apparently I was able to not only mess up my credit score but I also destroyed my ability to qualify for a bank account as well. I believe I overdrafted with Wells Fargo a couple years ago when I lost my job. Never thought or did anything about it and that account just seemed to disappear. Well now today I don't qualify for a bank account at Chase or any bank because something is reporting negatively on Early Warning Services. I haven't gotten the report yet -- it is a huge hassle to get and takes a couple weeks but it is on the way. So we all know how to get items removed from our credit report but how does one get negatives removed off their bank worthiness score? I don't want this to affect my ability to get credit cards in the future with BofA, Wells Fargo, or Chase when my scores are eventually high enough.

Well I do have a secured card through a local credit union. but not a banking account. I have a bank account now but am about to move and there are no branches there. I did call Wells Fargo and pay off the amount owed from so many overdraft charges. They said they'd update Early Warning Systems. I just don't know if it's like a credit report where it stays on my record and hinders me for the next 7 years or if it's an immediate kind of thing?

Warning! Using SuperDuper to clone from an HDD to an SSD might seriously da

WARNING! USING SUPERDUPER TO CLONE FROM AN HDD TO AN SSD MIGHT SERIOUSLY DAMAGE THE HEALTH OF YOUR SSD!
This is the new thread which I referred to when replying to:
http://discussions.apple.com/thread.jspa?threadID=2274972&start=0&tstart=0
I used SuperDuper to clone from a VelociRaptor 300GB HDD to an OCZ Agility EX SLC SSD, with disastrous results.
To save me the time of rewriting all the events please refer to the following emails and online submissions:
(Biltan-Wales - 21 Dec 2009 - 11.02 GMT):-
After reading several very favourable product reviews of the above SSD, I have just purchased one from Aria Technology Ltd., to use as a boot drive for my (early 2009) 8-Core 2.93GHz Intel Xeon Nehalem desktop workstation.
Also, prior to purchase of an OCZ SSD, I posted a question on Apple's Discussions' Forum:
http://discussions.apple.com/thread.jspa?threadID=2263023&tstart=0
From the response to this, and from reading several other threads regarding SSDs, I found that several Mac Pro owners are using OCZ SSDs as boot drives, and in some cases employing up to 3 of them.
I received my Agility EX from Aria on 16th. December, and yesterday afternoon I decided to set up my boot drive and 4 drive RAID 0, as described in: http://discussions.apple.com/thread.jspa?threadID=2263023&tstart=0
First of all I used SuperDuper to clone from my VelociRaptor 300GB drive in Bay 1, to my original Apple (WD) 640GB drive in Bay 2.
Then I removed the original Apple drive, and installed it in an ONNTO dataTale TQ-M12H external single enclosure, using a Firewire 800 interface connection. Next I selected this as my boot drive to check it would boot OK, restarted my system, and there was no problem.
So my next step was to install the Agility EX, and another 3 VelociRaptor 300GB drives, in the Mac pro workstation.
First, I reselected VelociRaptor 1 as my boot drive, so that I could use SuperDuper to clone to the Agility EX.
The Agility EX was installed in the lower of the 2 optical bays, and was connected to the pre-wired SATA and power cable, and the VelociRaptors were placed in hard drive bays 2, 3, and 4.
I then started up the Mac Pro, and there were 4 message boxes on the desktop, requesting that the drives should be initialised. So then I used Disk Utility to initialise the 4 drives. The SSD was named "Agility EX Boot", and the others "VelociRaptor 2", VelociRaptor 3, and VelociRaptor 4". The Mac system accepted all 4, and mounted desk top icons for each drive. I cannot remember the exact figure, but the Agility EX was listed as approx. 64GB in Disk Utility after its initialisation. All 4 VelociRaptors are shown as 300.07GB. All drives were formatted as Mac OS Extended (Journaled).
The next stage was to use SuperDuper to clone from VelociRaptor 1 to the Agility EX Boot drive.
Everything was fine until 28.00GB had been copied, and then nothing more would copy. The total to be cloned was just under 30GB, which should not have been a problem with a SSD disk capacity of approx. 64GB, but everything was frozen at that point - exactly 28.00GB!
Eventually, my only option was to stop the process, and quit Super Duper.
Then I restarted the system to try again, but this is where there is a real problem now!
My system does not recognise the Agility EX at all now! Also, it is no longer listed in Disk Utility!
The system does not even acknowledge its existence! It is not even shown on the desktop at start-up, whereas I thought that perhaps there might have been another message box requesting that it should be reinitialised.
I tried disconnecting and reconnecting everything - all drives, interface connections, power cables etc., but to no avail!
This morning I tried this again, but still I cannot get my system to even acknowledge the Agility EX, let alone list it!
So at the moment I am still using VelociRaptor 1 as my boot drive, and, in fact, as my main drive, because I am reluctant to use it with the 3 other VelociRaptors as a 4 drive RAID 0 set up until I get this problem with the Agility EX resolved.
(OCZ - 22 Dec 2009 - 18.29 GMT):-
Cloning from a HDD to an SSD is very problematic. I strongly recommend against doing this. Instead you will want to just install normally onto the SSD. You can clone from SSD to SSD, or from HDD to HDD, but going from one to the other can cause issues.
Try disconnecting the drive from the computer for an hour or so. This will allow all power in the drive to fully discharge. This is a way of resetting the drive that can usually recover the drive. Then plug the drive back in. Does the drive show up again?
If so, delete the partition on the drive, then create a new partition and then install the OS onto it clean rather than clone the OS onto the drive. That should resolve the issues you are having.
(Biltan-Wales - 23 Dec 2009 - 16.19 GMT):-
Thank you for your advice.
I have now disconnected the Agility EX SSD, and removed it from my Mac Pro's lower optical bay.
As Christmas is imminent, and I will not be using my system very much over the next few days, I will leave the drive for 4 to 5 days to allow ample time for all the power to discharge.
Then I will reconnect it, and I will let you know whether or not the drive is recognised by my system.
I was not aware that cloning from a HDD to an SSD could be problematic. Several threads on the Apple Support Discussion Forum have recommended using SuperDuper or Carbon Copy Cloner for this purpose. SuperDuper is the preferred option of most Forum members, whereas Lloyd Chambers (diglloyd.com), author of "macperformanceguide.com", uses Carbon Copy Cloner to clone his HDD boot drives to his Intel and Crucial SSDs.
After the Agility EX had been set up as my system boot drive, my intention was to use SuperDuper to clone from it to my original Apple (WD) HDD, now in an external enclosure with Firewire 800 interface, and then use SuperDuper's Smart Update for regular backups, so that I always had an up to date spare boot drive for the OS and applications.
The current VelociRaptor 1 boot drive would then be erased, and I would then use the Mac OS Disk Utility to create a 4 drive software RAID ) with the other 3 VelociRaptors, and this would be backed up using Time Machine to my existing WD My Book Studio Edition II 2TB External Hard Drive.
Please correct me if I have misunderstood your advice, but are you saying that I should only use another SSD, and not my original Apple (WD) HDD, as my back-up external boot drive? I don't know of any other Mac users who are using SSDs for that purpose, possibly because of the prohibitive cost of doing so.
I am more than happy to follow your advice to reinstall the Mac OS and my applications cleanly onto the Agility EX, and, in fact, I did exactly that with my first VelociRaptor HDD, before I had SuperDuper. However, that would still leave me with the problem of how to set up and maintain an external back-up system boot drive, without incurring the expense of another SSD. Any suggestions please?
Anyway the most important matter is the existing problem, and I am hoping that following your advice will resolve this.
I will contact you again early next week. In the meantime have a very enjoyable Christmas!
(OCZ - 24 Dec 2009 - 00.25 GMT):-
If the image is of an HDD and that image is then cloned onto an SSD that does tend to be problematic. I do not recommend doing this, as an image of the HDD somewhat regularly does fail to copy onto an SSD and still remain functional or fast.
You can store the image file on any sort of drive. Storing the image file is fine, as that is just a digital file, so the storage medium doesn't matter. Its actually applying that image to a drive is where the problems often occur.
You can image from a HDD to a HDD just fine, or an SSD to an SSD just fine, but going from one to the other is problematic enough that I recommend not doing this. Sometimes it works just fine, but other times it can fail catastrophically to the point of even bricking the drive. To error on the side of caution I recommend just going a clean install on the new SSD.
Once you have that clean install done you can then take an image of that SSD and image on to other SSD's, or store the image on a HDD for backup purposes.
(Biltan-Wales - 29 Dec 2009 - 13.16 GMT)
Thank you for your last email.
Further to your previous email, and my reply of 23/12/2009. this morning I reconnected the Agility EX SSD.
However, unfortunately, the drive has not showed up again on my system. There is no icon for it on the desktop, nor is it listed in Disk utility.
When I checked Serial-ATAS in my Mac Pro's System Profiler, all 6 Intel ICH10 AHCI are listed in the Serial-ATA Device Tree, but, whereas all my other drives are sub-listed, there is nothing underneath the ICH10 AHCI for the lower optical bay.
As the drive has had 6 days to discharge and reset, it would appear that it has not recovered.
Where do I go from here?
I am still awaiting a reply from OCZ, but that is not surprising, because of the different time zones and the Christmas?New Year holiday period.
In the meantime does anybody else have any ideas, please?

Hi thanon,
"So the SSD is not visible, not even in disk utility, even after a restart ?":-
No.
"Check the log of SuperDuper (Window-Show Log); warnings are in red, I think.":-
This is a copy of the log, but it only refers to the original Mac (WD) drive as the Target Volume and it only lists the last Smart Update. There is no record of the original cloning to the same drive on 21st. December, nor of the interim Smart Updates. There is no record logged at all for the OCZ Agility EX SSD, despite the unsuccessful cloning attempt on 21st. December:-
| 11:39:15 AM | Info | SuperDuper!, 2.6.2 (87), path: /Applications/SuperDuper!.app, Mac OS 10.6.2 build 10C540 (i386)
| 11:39:15 AM | Info | Started on Sun, Dec 27, 2009 at 11:39 AM
| 11:39:15 AM | Info | Source Volume: VelociRaptor 1, mount: /, device: /dev/disk3s2, media: WDC WD3000HLFS-01G6U1, interconnect: Internal SATA, file system: "Journaled HFS+", OS: 10.6.2 (10C540), capacity: 299.73 GB, used: 30.53 GB, directories: 164608, files: 521266, ejectable: NO, ACLs: Enabled
| 11:39:15 AM | Info | Target Volume: Untitled 1, mount: /Volumes/Untitled 1, device: /dev/disk5s2, media: Ext Hard Disk, interconnect: External FireWire, file system: "Journaled HFS+", OS: 10.6.2 (10C540), capacity: 639.79 GB, used: 30.27 GB, directories: 164519, files: 522654, ejectable: YES, ACLs: Enabled
| 11:39:15 AM | Info | Copy Mode : Smart Update
| 11:39:15 AM | Info | Copy Script : Backup - all files.dset
| 11:39:15 AM | Info | Transcript : BuildTranscript.plist
| 11:39:15 AM | Info | PHASE: 1. Prepare to Copy Files
| 11:39:15 AM | Info | ...ACTION: Preparing VelociRaptor 1
| 11:39:15 AM | Info | ......COMMAND => Verifying the integrity of volinfo.database
| 11:39:15 AM | Info | volinfo.database OK
| 11:39:15 AM | Info | ......COMMAND => Enabling permissions on VelociRaptor 1
| 11:39:15 AM | Info | Refreshing Disk Arbitration ...
| 11:39:15 AM | Info | ......COMMAND => Verifying that permissions are enabled for VelociRaptor 1
| 11:39:15 AM | Info | Permissions on '/' are enabled.
| 11:39:15 AM | Info | ...ACTION: Preparing Untitled 1
| 11:39:15 AM | Info | ......COMMAND => Enabling permissions on Untitled 1
| 11:39:15 AM | Info | Refreshing Disk Arbitration ...
| 11:39:16 AM | Info | ......COMMAND => Verifying that permissions are enabled for Untitled 1
| 11:39:16 AM | Info | Permissions on '/Volumes/Untitled 1' are enabled.
| 11:39:16 AM | Info | ......COMMAND => Verifying that Untitled 1 ACL support matches VelociRaptor 1
| 11:39:16 AM | Info | ...ACTION: Preserving Spotlight state on Untitled 1
| 11:39:16 AM | Info | ......COMMAND => Disabling Spotlight search indexing on Untitled 1
| 11:39:16 AM | Info | PHASE: 2. Copy Files
| 11:39:16 AM | Info | ...ACTION: Copying files from VelociRaptor 1 to Untitled 1 using Smart Update
| 11:39:16 AM | Info | ......COMMAND => Cloning VelociRaptor 1 to Untitled 1
| 11:39:16 AM | Info | Copying copy files with delete using script: /Users/williamtanner/Library/Application Support/SuperDuper!/Copy Scripts/Standard Scripts/Backup - all files.dset
| 11:39:16 AM | Info | Loading 27 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude system temporary files.dset
| 11:39:16 AM | Info | Loading 6 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude system cache files.dset
| 11:39:16 AM | Info | Loading 1 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude Norton FileSaver files.dset
| 11:39:16 AM | Info | Loading 2 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude Google Desktop Index files.dset
| 11:39:16 AM | Info | Loading 1 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude iTunes Temporary files.dset
| 11:39:16 AM | Info | Loading 0 commands from copy script /Users/williamtanner/Library/Application Support/SuperDuper!/Copy Scripts/Standard Scripts/Backup - all files.dset
| 11:39:20 AM | Info | /
| 11:39:20 AM | Info | /.vol
| 11:39:20 AM | Info | Ignoring /.vol
| 11:39:20 AM | Info | /cores
| 11:39:20 AM | Info | /Network
| 11:39:20 AM | Info | /.Spotlight-V100
| 11:39:20 AM | Info | Preserving /.Spotlight-V100
| 11:39:20 AM | Info | /private
| 11:39:20 AM | Info | Ignoring /private/var/folders/-S
| 11:39:20 AM | Info | Ignoring /private/var/folders/zz
| 11:39:20 AM | Info | Ignoring /private/var/tmp/com.epson.epw
| 11:39:20 AM | Info | Ignoring /private/var/tmp/com.apple.speech.synthesis.globals
| 11:39:20 AM | Info | Ignoring /private/var/tmp/launchd
| 11:39:20 AM | Info | Ignoring /private/var/tmp/com.WD.WDDriveManagerService
| 11:39:23 AM | Info | Ignoring /private/var/vm/swapfile0
| 11:39:23 AM | Info | Ignoring /private/var/run/vpncontrol.sock
| 11:39:23 AM | Info | Ignoring /private/var/run/usbmuxd
| 11:39:23 AM | Info | Ignoring /private/var/run/syslog.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/syslog
| 11:39:23 AM | Info | Ignoring /private/var/run/printtool
| 11:39:23 AM | Info | Ignoring /private/var/run/portmap.socket
| 11:39:23 AM | Info | Ignoring /private/var/run/mDNSResponder
| 11:39:23 AM | Info | Ignoring /private/var/run/cupsd
| 11:39:23 AM | Info | Ignoring /private/var/run/com.apple.ActivityMonitor.socket
| 11:39:23 AM | Info | Ignoring /private/var/run/asl_input
| 11:39:23 AM | Info | Ignoring /private/var/run/SCHelper
| 11:39:23 AM | Info | Ignoring /private/var/run/diskarbitrationd.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/configd.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/DirectoryService.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/.DSRunningSP1
| 11:39:23 AM | Info | Ignoring /private/var/run/automount.initialized
| 11:39:23 AM | Info | Ignoring /private/var/run/mds.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/com.apple.loginwindow.didRunThisBoot
| 11:39:23 AM | Info | Ignoring /private/var/run/pppconfd
| 11:39:23 AM | Info | Ignoring /private/var/run/resolv.conf
| 11:39:23 AM | Info | Ignoring /private/var/run/sntp.log
| 11:39:23 AM | Info | Ignoring /private/var/run/ntpd.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/utmpx
| 11:39:23 AM | Info | Ignoring /private/var/run/mds
| 11:39:32 AM | Info | Ignoring /private/var/db/BootCache.playlist
| 11:39:32 AM | Info | Ignoring /private/var/db/volinfo.database
| 11:39:32 AM | Info | Ignoring /private/tmp/MobileDevice.log
| 11:39:32 AM | Info | Ignoring /private/tmp/launchd-99.KTlnYd
| 11:39:32 AM | Info | Ignoring /private/tmp/launch-TIwnDn
| 11:39:32 AM | Info | Ignoring /private/tmp/launch-S6asBo
| 11:39:32 AM | Info | Ignoring /private/tmp/launch-1v6MDi
| 11:39:32 AM | Info | Ignoring /private/tmp/icssuis501
| 11:39:32 AM | Info | Ignoring /private/tmp/4b3745a3d4d81
| 11:39:32 AM | Info | Ignoring /private/tmp/target221.indexState
| 11:39:32 AM | Info | /Users
| 11:39:36 AM | Info | Ignoring /.hotfiles.btree
| 11:39:36 AM | Info | /bin
| 11:39:36 AM | Info | /sbin
| 11:39:36 AM | Info | /usr
| 11:39:48 AM | Info | /System
| 11:41:47 AM | Info | /Library
| 11:42:41 AM | Info | /Applications
| 11:44:22 AM | Info | /.Trashes
| 11:44:22 AM | Info | /.fseventsd
| 11:44:22 AM | Info | Preserving /.fseventsd
| 11:44:22 AM | Info | /dev
| 11:44:22 AM | Info | /net
| 11:44:22 AM | Info | /home
| 11:44:22 AM | Info | /Volumes
| 11:44:22 AM | Info | Ignoring /Volumes/My Book
| 11:44:22 AM | Info | Ignoring /Volumes/VelociRaptor 3
| 11:44:22 AM | Info | Ignoring /Volumes/VelociRaptor 4
| 11:44:22 AM | Info | Ignoring /Volumes/VelociRaptor 2
| 11:44:22 AM | Info | Ignoring /Volumes/VelociRaptor 1
| 11:44:22 AM | Info | Ignoring /Volumes/Untitled 1
| 11:44:22 AM | Info | Evaluated 685438 items occupying 29.45 GB (164606 directories, 511269 files, 9563 symlinks)
| 11:44:22 AM | Info | Copied 463 items totaling 0.69 GB (117 directories, 335 files, 11 symlinks)
| 11:44:22 AM | Info | Cloned 29.15 GB of data in 306 seconds at an effective transfer rate of 95.25 MB/s
| 11:44:22 AM | Info | ......COMMAND => Resetting Custom Icon bit on Untitled 1
| 11:44:22 AM | Info | PHASE: 3. After Successful Copy
| 11:44:22 AM | Info | ...ACTION: Making Untitled 1 bootable
| 11:44:22 AM | Info | ......COMMAND => Blessing OS X System Folder
| 11:44:23 AM | Info | Successfully blessed Mac OS X folder on Untitled 1
| 11:44:23 AM | Info | ......COMMAND => Blessing OS 9 System Folder
| 11:44:23 AM | Info | Did not bless Mac OS 9 System Folder on Untitled 1 because it does not exist.
| 11:44:23 AM | Info | ...ACTION: Updating prebinding on Untitled 1
| 11:44:23 AM | Info | ......COMMAND => Updating boot cache on '/Volumes/Untitled 1'
| 11:44:30 AM | Info | updatedyld_sharedcache[271] current i386 cache file invalid because /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv has changed
| 11:44:34 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
| 11:44:34 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
| 11:44:38 AM | Info | updatedyld_sharedcache[271] current ppc cache file invalid because /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv has changed
| 11:44:41 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
| 11:44:41 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
| 11:44:45 AM | Info | updatedyld_sharedcache[271] current x86_64 cache file invalid because /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv has changed
| 11:44:48 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
| 11:44:48 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
| 11:44:52 AM | Info | Successfully updated boot cache on Untitled 1
| 11:44:52 AM | Info | ...ACTION: Restoring Spotlight state on Untitled 1
| 11:44:52 AM | Info | ......COMMAND => Restoring Spotlight search indexing state on Untitled 1
| 11:44:53 AM | Info | /Volumes/Untitled 1:
| 11:44:53 AM | Info | Indexing enabled.
| 11:44:53 AM | Info | Indexing enabled on Untitled 1
| 11:44:53 AM | Info | Copy complete.
"Maybe turn the MP off, pull the power cord and disconnect all external devices but keyboard and mouse, disconnct the SSD, reconnect and start MP":-
I have tried this several times without any success.
"Also, make sure no programs are running during cloning, and leave the computer alone.":-
SuperDuper was the only program running when I cloned firstly to the Mac (WD) HDD, and secondly to the Agility EX on 21st. December.
Also everything was disconnected before I removed and transferred the Mac HDD to an external enclosure.
After I had checked that the Mac HDD had been cloned successfully, everything was disconnected again before I fitted the Agility Ex and the other 3 VelociRaptors in the lower optical drive bay, and drive bays 2,3 & 4 respectively.
I used a Lindy anti-static Service Kit throughout the whole process. I purchased this originally for when I installed 16GB of Kingston RAM, an ATI Radeon HD4870, and my first VelociRaptor

Re: Early Warning Report

Dear all,
I have set exception using t-code MC/1 in the system for materials that I want the system to trigger a re-order point and send a early warning report to me the material numbers that require re-order when is low.
However, I have been all along receiving 1 email for the list of materials for re-order everyday.
But all of a sudden I have been receiving two separate emails everyday, which in one emails there is a list of materials that display the stock remaining for a list of materials that require re-ordering while the other report show another different list of materials with zero stocks remaining for a list of material numbers, which I have checked its availability in the system manually, and it is wrong (meaning there is stock remaining).
Why is this happening? Did I entered a wrong characteristic?
Pls help. Thanks

Hi sami,
Yes I would be pleased to share, but it is no SAP problem, but human error.
The receipt of two copies of the same early warning report is due to the OS/DB migration.
We changed the server and upgrade the system to ECC6. Our new Test server uses the old Production server as platform for migration of the database. As it contain background job still running, it is copied to the new Test server. Once testing is completed, the data is sync to the new Production server with the new OS and new server.
Hence, both the new Test and new Production server contain background job that is still running and with the same variants. So, it makes sense that as the job is assigned to the distribution list that is automatically sent via the smtp, both the Test and Production server sent out the same report as scheduled.
When we ceased all background jobs in the new Test server, the problem is resolved.
Rgds.

Early Warning for 3rd party software issues

We have Vertex set up but have occasional timing, connection issues, etc.
Does anyone have configured an early warning configured for 3rd party software?
Looking for solutions or suggestions.

Why can't Apple have their own interface for Windows mobile applications instead of having to purchase Mark Space.
Hang on... Why should Apple provide their own interface for syncing Microsoft Windows Mobile-based phones? Microsoft don't provide support for Apple's phones do they?
Microsoft have chosen to use their own proprietary and incompatible syncing methods to sync their own operating systems. It stands to reason you'd be able to sync a Windows Mobile-based phone with a Windows desktop OS.
why have I got to purchase third party Nova software to sync my N95 8GB
You haven't got to. Nokia provides their own support via a free iSync Plugin for that phone here:
http://europe.nokia.com/mac/isync/
If you're having problems with that, then Nokia are the people to contact - not Apple. But from your other post it appears you're having problems with installing it, not using it, and that's most likely because you've moved iSync.

Early warning system using S026 infostructure

Similar Messages

Maybe you are looking for