Early watch Report issue in Solution Manager

HI
I have configured the EWA report for system in Solution Manager 4.0 and report is generating but the issue is in the report EWA for Solution following section remain empty
Workload and Performance Analysis
Exception Analysis and Change Analysis
and one more issue for our production system the EWA report status is showing Not Productive
Thanks for your help
Harish

>
Harish Kumar Jaiswal wrote:
> I have configured the EWA report for system in Solution Manager 4.0 and report is generating but the issue is in the report EWA for Solution following section remain empty
>
> Workload and Performance Analysis
> Exception Analysis and Change Analysis
>
> and one more issue for our production system the EWA report status is showing Not Productive
Please check, whether the managed system is well prepared.
It requires add-ons ST-PI and ST-A/PI, data in workload statistics ST03N.
Run RTCCTOOL via SE38 and check the results.
See SAP Note 91488
Ruediger

Similar Messages

Early Watch Alerts Problem in Solution Manager

Hello,
I am trying to configure EWA for my SAP R/3 systems in Solution Manager 3.2. RFC connections are working fine. EWA report that is getting generated is showing me following problem :
<b>EarlyWatch Alert - R/3 System</b>**********
<b>Download Problem</b>
We could not perform a correct analysis because essential parts of the download data are missing. The cause is probably a problem with data collection or transfer.
Recommendation: Please check the log for this session in the Service Data Control Center (execute transaction SDCC or the new SDCCN in your system). If an error entry is listed, perform the Service Preparation Check.
Implementation: To perform the Service Preparation Check, execute transaction SDCC and choose Information-> Service prep. check or if you use SDCCN create a new task 'Service Preparation Check'.
The result of Service Preparation check ( as recommended) is not throwing any error.
Can anyone help me out on this.
Regards,
Yashodhan

Hello Yashodhan Mujumdar,
we have warnings about differences in the function interface, but all works, so we ignore them.
But the missing data interface seems to be the error.
Did you read note 781680?
Do you have the newest ST-PI (2005_1_xxx SP3) and ST/A-PI (01G_xxx, this is an installation, no patch)? Do you have the right flavour of ST/A-PI?
Are ST03N and ST06 working?
Do you refresh service definitions from sapnet? Did you generate (after service refresh) on the solution manager system the includes (SPRO -> SAP Solution Manager -> Basic settings -> SAP Solution Manager System -> Operations -> Setup Service Data Control Center -> Generate Includes....
If these checks are all ok you might deactivate SDCCN both in satellite system and solution manager (SMSY -> Goto -> Solution Manager Operations -> Administration SDCCN) and activate it again.
If this doesn't work you might use the big hammer:
1) delete all the service definitions in satellite system like described in note 727998
2) delete all entries in table /BDL/_GENER (satellite system)
3) create in SolMan system a new session in order to collect and send data for this session in satellite system; if you don't see the session in the satellite system please execute there the "Maintenance Package"
4) elaborate the data for this new session in SolMan system
If all this doesn't help, open a message in sapnet
Bye
Message was edited by: Riccardo Escher

Early Watch Report - Archive EWA

Hello,
I have configured Early Watch Report in my Solution Manager 4.0 on Windows Server 2003 4 weeks back.
EWA report is comng perfectly but in my Solution for each server I am able to see only 2 (Latest one and Next Schedued) EWA report at a time.Not able to see previous week report.
How can I see my older EWA reports ??
Thanks,
Chandresh Pranami

hi.
maybe you have configured that older reports are deleted after two weeks...
there is a possibility to customize - i think its under transaction solution_manager.
normally, they never go away.
regards,
martin

RFC configuration for system monitoring / Early Watch reports

Hello Basis Gurus:
Please help me out.....
The early watch reports in the solution manager of my system are failing consistently to execute.This is happening for all the 3 systems DEV,QAS,PRD.when i click on individual earlywatch reports it takes me to a screen which says "data for this report is overdue.....go to your satellite system SDCCN to see why the data was not sent...."
It says ...check the following things.....
"The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data."
I can see the task processor job , and the periodic Maintenance package scheduled everyday and completed sucessfully.So is it the RFC which is causing the problem.
Im SM59 of the solman, i can see system generated RFCs for the PRD,DEV,QAS and SND (...3 for each of these systems...).
say for PRD, these are the 3 RFCs.
1.)SM_PRDCLNT<client#>_READ.
2.)SM_PRDCLNT<client#>_TMW.
3.)SM_PRDCLNT<client#>_TRUSTED.
I am not sure which RFCs among the 3 for any given system does the solman use to communicate to the satellite systems.
*The user id section in the Logon Data of any of these RFCs is blank.and the password says "is initial"...*is this correct.Does the user id have to be a communication type of user...
PLeaase advise as to what could be going wrong..
Regards.

Hi,
The system uses ABAP Connection (Connection Type 3) to connect to different Systems to execute Functional Calls.
Now in your case, there are 3 different connections meaning your Basis Team has used 3 connections for different connection activities. This is totally a business dependent scenario.
Now each time you create a RFC Connection, the system will need the following information to remotely call another system, they are:
Host Details of Target System
Logon Details to remotely login
For RFC Connections the User Type has to be Communications User. But there are companies which use Dialog User Types as well to remotely login for some cases. When the User ID is created for an RFC User and a Password is assigned to it, this Password is considered as the Initial Password by the system. This Password is taken as the Initial Password in the RFC Connection as well.
There can be cases where the system is Trusted and there is no need of a password, but an Username is mandatory in all cases. Remember if you set the system as Trusted, the password option gets deactivated and the connection wont work, if the system does not have the Trusted status.
But in any case you must assign the Username alongwith the Client and Language Details in the RFC Connection for it to work.
Hope this helps.
/Manoj

Early watch report - Status as it is in Solution manager

Dear All,
I have configure early watch report in solution manager.
1. I have created new service for our production server.
2. click on newly created service
3. Press button "call Service Data Control Center"
4 System ask for prodction password.
5 now SDCCN's screen of production server open.
6. Create a new task "Refresh sessions" with selecting "Now" option.
7. Start a New task is created.
8. Task is complited successfuly but sessio data not transmited to solution manager.
I have also tried with "Start service processing. But still service is in "wait for session data". This status remains same as newly created service.
Request you to please suggest solution
Thanks in advance,
Nirav

Hello,
When you press call Service Data Control Center, is it that there is a red flag for the EWA and when you click it you get that button? This means the EWA is scheduled in Solman, but on the managed system there is an issue with the SDCCN EWA task or the *_BACK RFC.
First, the Maintenance Package task is what should be schedyuled daily. It will 1 Refresh the service defintions regularly and aslo perform a refresh sessions task. You should not be scheduling the refresh session task ( unless you want to send to SAP or a second Solution Manager sytem).
The refresh session task will create an EWA task, and you did not mention this task was created from the refresh session task.
If the EWA task is not created on the satellite once the refresh session is run, then there was no session. This would indicate an error in SMSY defintions, such as the installation number there does not maych the actual installation number, as a for instance.
SDCCN task logs have to be looked at as they may have errors inside, but the task has a green check.
Also visit http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728
Regards,
Paul

Early watch Report deletions from archive queue in Solution Manager

Hi Experts ,
I am working on Solution manager EHP1 (SP24). Here more than 100 satellite systems are connected .
and every week approximately 100 Early watch reports are getting generated into the system .
Is there any way to delete the early watch reports from the archive queue of the system which are 6 months
older.
A quick help is highly appreiciable
Thanks,
Kamal Kumar

>
Kamal Kumar wrote:
> I am working on Solution manager EHP1 (SP24). Here more than 100 satellite systems are connected .
> and every week approximately 100 Early watch reports are getting generated into the system .
>
> Is there any way to delete the early watch reports from the archive queue of the system which are 6 months
> older.
Hi Kamal,
Have you already tried report RDSMOPREDUCEDATA
It offers the deletion of service session, documents and download data.
Best regards,
Ruediger

Configure Early Watch Reports in SolMan

Hi Gurus,
Can you please help me out in the steps of configuring SolMan for Early Watch Reports.
Thanks in Advance,
Sachin Kumar.

Hello Sachin,
Please implement/apply latest ST-PI and ST-API patches in your Dev system.
after applying the patches please execute RTCCTOOL program in Se38 t code.
This program helps in service preperation so that data from your satellite system(Dev) can be sent to
solution manager system.
once you are done with that we can configure Dev system in solution manager system and activate SDCCN.
SDCCN will help in collecting data from dev to Solman.
Please apply ST-PI and ST-API from SAINT transaction if it has never applied into your system.
You can add dev qa and prd system in Solution manager system
Use SMSY t code and add the systems(use add system with assistant option).
this will help you to create the RFC's also which are responsible for cummunicating from Solution manager to Satellite and vice versa.
after that make sure you execute the abap program RTCCTOOL and implement the missing notes thru that only which the report suggests.
let me know if you face any issues for the above steps ...
Cheers,Amber S

What is early watch report

Hi Experts,
What is early watch report? Who creates it and what is its purpose?
Thanks.
SM

Hi,
are you using Solution Manager to monitor your landscape??
Early watch report used for to analyze detailed information about system status, performance, configuration, system operation, database administration details.
google it..you get more info.
Regards,
Raj

Early Watch Report for TREX

Hi All,
Can we generate Early Watch Report for TREX. How do we add TREX system through SMSY in Solution Manager?
Thanks

Dear Amit,
Unfortunately currently its not possible to intagrate the TREX system details to the EWA reporting. There are no TREX specific checks yet available.
Thanks,
Mark

Query Regarding Early Watch Report

Hi All,
I have certain queries regarding the Early Watch Report.
Our platform in Oracle 10g and OS is HP-UX.Please sombody help me with the following.
1.What is Early Watch report and why we use it?
2.How to configure Early watch report from Solution Manager for DEV and QUA and PRO server?
3.If we dont configure will SAP take it from the system by logging in to client 066(correct me if I am wrong).
I have read SAP notes 20722,917558,12103,371023 but cant really make out how to configure it for our servers via Solution Manager.
PS:Helpful suggestions will be obliged and rewarded.
Regards,
Ashutosh

Hi Ashutosh,
Please check below answers for your queries:
1.What is Early Watch report and why we use it?
The SAP EarlyWatch Alert is a diagnosis service, for the solution monitoring of SAP and non-SAP systems in the SAP Solution ManagerThis process identifies potential problems early, avoids bottlenecks and monitors the performance of your systems. SAP EarlyWatch Alert monitors your most important business processes and systems.
2.How to configure Early watch report from Solution Manager for DEV and QUA and PRO server?
Prerequisites to configure the Early Watch Report:
You have:
·        set up RFC connections between your satellite systems and the SAP Solution Manager system, and an RFC connection between the SAP Solution Manager and the SAP Service Marketplace.
·        checked the availability of the required tools for the SAP service session (ST-A, ST-PI add-on), with the report RTCCTOOL.
·        assigned the Solution Monitoring roles to the users.
·        set up the Automatic Session Manager (ASM) in the Service Data Control Center (transaction: SDCCN) for all SAP satellite systems and the central SAP Solution Manager of your solution (SAP note 91488).
·        set up your systems in a solution landscape in the SAP Solution Manager.
Configuration steps:
1.      You configure the SAP EarlyWatch Alert scheduling in the SAP Solution Manager.
You have:
¡        scheduled the service sessions for your solution, in the SAP Solution Manager Solution Directory
Procedure:
       1.      Choose the transaction SOLUTION_MANAGER.
       2.      Choose the Solution Landscape tab in the Operations Setup area.
       3.      Choose the Solution Settings link.
You go to the Solution Directory.
Alternatively, you can also select a solution from the Overview of active solutions and go to the Solution Directory.
       4.      Select your solution.
       5.      You can also enter contact person data in the Contact Person tab.
      Proceed as follows:
                                                  i.       Choose Add Contact Person.
                                                ii.       Enter the required data.
                                               iii.       Save your entries.
§         The contact data appears in the Solution Monitoring sessions, e.g. in Set-Up Business Process Monitoringsapurl_link_0001_0004_0005.
       6.      Specify the settings for your solution, in the Solution Settings tab:
        Ex: Day of SAP EarlyWatch Alert data download
At the end save your entries.
3.If we dont configure will SAP take it from the system by logging in to client 066?
Yes, SAP uses this client when running the Early Watch Check.
Hope it clears your doubt.
Thanks
Kishore

How to generate "Early watch report uisng sdccn"

Hi Guys,
Can any body please provide me brief knowledge on " how to generate an Early Watch Report using SDCCN"
infact i have searched in the forums but not very much clear.
Thanks,
LAX

Hi,
can you look at this
[EWA|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fnetweaver%2fs-u%2fsolutionManager4.0-HowtogenerateEWA%E2%80%99sFromSatelliteSystems.pdf]
[http://sapnetweavernotes.blogspot.com/2008/04/sap-earlywatch-alert.html]
[https://service.sap.com/earlywatch]
For taking EWA report through solution manager, you have to perform satelite system configuration. Please check the below link which have tutor files, related step by step documents for EWA.
[http://www.service.sap.com/rkt-solman]--> select ur component version --> <Technology Cons. & System Admin.> select EWA
763561 -- More information about SDCCN can be obtained here.
91488 --- SAP Support Services- Central preparatory note.
Regards,
Muralidhar

Steps to start the Early watch report

Hi Experts,
Can you explain me about early watch report in detail and let me know the step by step to prepare early watch report.
Is there any difference between Early watch report and Early watch alert?
Regards,
Suresh.

Hi Suresh,
Early Watch report as name suggests is performance Summary report for system.
It is auto generated report via solution Manager which collects Data from system thus generating the report.
It covers CPU/ memory/Disk Utilization/Database growth/system performance/critical errors/dumps etc.
For functional team it shows which reports are taking more time and shows the queries causing it.
From BW stand point it shows lot of data related to cubes, info providers, Queried and what can be done to improve the overall performance in general.
Hope this answers your query if not please do revert in case you have any queries.
Thanks &Regards,
RDS

Schedule the Early watch report job

Hi
I want to schedule the Early watch report job. Now I am doing it manually by downloading the xml data(from Portal ) and uploading in solman to get the report.
Please tell me the procedure.
Thanks in advance
Yogesh

Hi
I believe you better need to implement SMD soultion manager diagnostics, thats the best way
can find more info on
Installing a Solution Manager Diagnostics (the easy way)
http://service.sap.com/diagnostics
Jo

Schedule the Early watch report

Hi
I want to schedule the Early watch report job. Now I am doing it manually by downloading the xml data(from Portal ) and uploading in solman to get the report.
Please tell me the procedure.
Thanks in advance
Yogesh

Hi
I believe you better need to implement SMD soultion manager diagnostics, thats the best way
can find more info on
Installing a Solution Manager Diagnostics (the easy way)
http://service.sap.com/diagnostics
Jo

BW Early watch report ( SBIW )

Hi All,
We have received the early watch report for BW and in that It has mentioned to do SBIW ( IMG ) activity as follows:
Upload customizing BW (SBIW)
One part of table ROIDOCPRMS in every SAP source system controls the data transfer from the source systems
to this system. Table ROIDOCPRMS contains the following information:
maxsize - Maximum size of an IDoc packet in KB
statfrqu - The number of packets that are transferred before statistical information is sent
maxlines - Maximum number of records sent in one IDoc packet
maxprocs - Maximum number of dialog work processes for each upload request used to send the data to the
system
The correct setup of this table is important for performance and stability of the upload process. We checked the
setup of this table for all source systems connected to this system.
SAP asks to change the entries and it has given recommendations. I hope this will increase the rate of Data Transfer from ERP to BW.
My Questions :
01. My question is they have mentioned to set this in the respective Source System. i.e. Should I set it in the Production System.
02. one more thing. It is also required to create a transport request to do the above operation. for that case, should I create a Transport Request in the Production System. ? Is that generally ok ? how it is handled usually ??
03. To execute SBIW Transaction, what authorization is required ? and how to check which authorization is required to execute SBIW ??
Please throw me some light on this.
Thanking you in Anticipation.
Thanks & Regards
L Raghunahth
PS : If you know answer to any particular one also, please feel free to answer.

Hi Raghunahth,
Please see my answers below.
01. My question is they have mentioned to set this in the respective Source System. i.e. Should I set it in the Production System.
These settings are related to the respective source sytem. Yes these settings are to be done on production system
02. one more thing. It is also required to create a transport request to do the above operation. for that case, should I create a Transport Request in the Production System. ? Is that generally ok ? how it is handled usually ??
No transport request required. Check with your basis guy to carryout these settings.
03. To execute SBIW Transaction, what authorization is required ? and how to check which authorization is required to execute SBIW ??
Ask the basis guy to give acces rights to tcode SBIW on the source system.
Hope this helps.
Regards,
Sreenivas.

Early watch Report issue in Solution Manager

Similar Messages

Maybe you are looking for