Earlywatch Alert session does not exist in SDCCN
Hi,
I am trying to create an EWA for a satellite system (BID) from our
SolMan system, but it is not working despite all RFC connections
between the system working fine in both directions..
The EWA sessions appear to be active in SolMan, but no EWA session
appears in BID's SDCCN.
Steps for the Reconstruction
From DSWP, I choose Operations Setup > Solution Monitoring > Earlywatch
Alert > Setup Earlywatch Alert.
The Earlywatch Alert Administration screen appears and shows 5 active
sessions against system BID. I do not know why there are 5 active
seesions - perhaps you can explain?
From DSWP, I now choose Operations > Solution Monitoring > Earlywatch
Alert
I see BID's Earlywatch seesions in the list, but they have a red flag
against them. When I double-click on one of these sessions and
press 'Call SDCC', it takes me to BID's SDCCN screen and I see that
there are no EWA sessions there.
The Self-Diagnosis help in SolMan suggests that there's a problem with the BACK RFC from BID, but I have tested this (both connection and authorisation tests) and it appears fine.
How do I make the EWA sessions appear on BID's SDCCN screen?.
Please help,
Arwel.
I have now resolved this problem. It was caused by not having the BACK RFC destination defined within the staellite system's SDCCN. I added the BACK RFC to SDCCN using Goto > Settings > Task-specific.
Once this entry was added, running a Refresh Session in SDCCN brought in all the EWA session that were 'waiting' on SolMan.
Regards,
Arwel.
Similar Messages
-
Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before. -
Reporting using SSRS not working - logon session does not exist
Hello All,
After installing the 'reporting site system role' and configuring (using MS technet reference guides), I see the report folder under my Monitoring-> reporting->reports folder;
When I click on a report and 'run', I get the following error:
"the default value expression for the report parameter 'usertokenSIDs' contains an error. A specified logon session does not exist. It may already have been terminated"
details:
System.Web.Services.Protocols.SoapException: The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist. It may already have been terminated.
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Microsoft.ConfigurationManagement.ManagementProvider.SmsException
The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist. It may already have been terminated.
Stack Trace:
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.Web.Services.Protocols.SoapException
System.Web.Services.Protocols.SoapException: The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist. It may already have been terminated.
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Stack Trace:
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
The account I'm using is a domain account with 'full' permissions to compliance security role. I also verified the individual object level permission and it holds good. I'm not sure what I'm missing here.
Any help on this is greatly appreciated. thanksI talked to a member of the product team and they agree this is not a solution. He has not heard of this issue before and STONGLY recommends that you contact CSS for support. This is the only way this is going to be fixed permanently.
It is my guess that if you ever apply a service pack 2 or other updates to CM12, this problem will re-occur, again this is my guess this will happen again.
Remember that if it is a bug then there is no charge for the support call.
http://www.enhansoft.com/ -
ORA-04043: object SYS.DELTA$SESSION does not exist
Dear Friends
after I import my data by using the follwoing import script :
IMP JCC/P_MANUF FILE =JCC.DMP FULL
and at the end give this message import has been imported succesfully without warning
then when I use this script :
SQL> SELECT TNAME FROM TAB
2 WHERE TNAME LIKE 'USER_SESSION'
3 /
TNAME
USER_SESSION
The table USER_SESSION is exist but when I try to desplay the structure of the USER_SESSION by using this :
SQL> DESC USER_SESSION
ERROR:
ORA-04043: object SYS.DELTA$SESSION does not exist
and when I try to use the select statment as the following
SELECT * FROM USER_SESSION
ERROR at line 1:
ORA-00980: synonym translation is no longer valid
Waiting for your valuable answer.
Best regards
Jamil AlshaibaniSQL> select * from V$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Linux: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL> !uname -a
Linux KAD-VMWARE 2.6.9-55.ELsmp #1 SMP Fri Apr 20 16:36:54 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
SQL> sho user
USER is "SYS"
SQL> select object_type,status from dba_objects where object_name = 'K_DRWDWN_GRP' and OWNER = 'SYS';
no rows selected
Is any thing wrong with my dictionary? please let me know if i missed anything?
Edited by: sanora600 on Oct 16, 2010 12:34 AM -
Java.lang.IllegalArgumentException: Session: null does not exist
These days I am getting an exception (java.lang.IllegalArgumentException: Session: null does not exist) when I restart the weblogic managed server. I have a work around to get away with this error. I completely delete the dataspace from ALDSP console and redeploy the artifacts jar file. This is a tedious process. Can anyone suggest a permanent fix to resolve this issue.
ALDSP version: 3.01
Weblogic Server: 9.2.2
Thanks.Hey ,Can you please help me?can you tell me how you resolved this issue.Our production is down due to
java.lang.IllegalArgumentException: Session: null does not exist.
at com.bea.dsp.management.persistence.primitives.ServerPersistencePrimitives.getDataspaceRoot(ServerPersistencePrimitives.java:118)
at com.bea.dsp.management.persistence.primitives.ServerPersistencePrimitives.getDataspaceRoot(ServerPersistencePrimitives.java:73)
at com.bea.dsp.management.activation.ActivationService.dataSpaceAlreadyExists(ActivationService.java:342)
at com.bea.dsp.management.activation.ActivationService.setRequestHandlerClassLoader(ActivationService.java:206)
at com.bea.ld.server.bootstrap.RequestHandlerListener.postStart(RequestHandlerListener.java:46)
Truncated. see log file for complete stacktrace.
Its urgent plz -
Alert Configuration : 404 Not Found The requested resource does not exist
Hi all ,
We are facing problem in Alert configuration and
Alert Inbox . We are on SP14 service patch
We are getting error as " 404 Not Found The requested
resource does not exist "
We have activated all the necessary services in
Tcode : SICF as mentioned in the config. guide
We have executed the program :
SXMB_ACTIVATE_ICF_SERVICES
We have referred the SAP note : 750287 and tried to
set the httpport as per the note but again we are
getting error as "The page cannot be displayed" .
We have checked the parameters in Exchange profile
for httpport as well as for host also .
Can someone please guide us on this .
Thanks
ShikhaHi all ,
Thanks for the replies .
Shravan ,
I pinged my XI and is working . we have already added
the IP Address and the host name , but the same error
is coming .
Anirban,
Checked all the necessary services again as suggested
by you .
Andreas ,
> is to set the abap profile parameter
LOCALHOSTFULL to the fqhn.
Can you please let me know where to set the abap
profile parameter "LOCALHOSTFULL" as suggested by you .
Thanks
Shikha -
Hi Every one,
An error has occurred during report processing. (rsProcessingAborted)
Get Online Help
Query execution failed for data set 'NonFinTran'. (rsErrorExecutingCommand)
Get Online Help
Cannot drop the table '#NonFinTran', because it does not exist in the system catalog. Cannot drop the table '#MultipleNonFinTran',
because it does not exist in the system catalog. Transaction context in use by another session.
NOTE: NonFinTran &
MultipleNonFinTran are
the Temp table in my storedPoc.
Please any help me to solve this issue.
Thanks & Regards,
Anil Kumar
Anil KumarHi Harsh,
Below is my Stored Proc
SELECT @ServerName=datasource from master.dbo.sysservers WHERE catalog='Voyager'
SELECT @ServerName3=datasource from master.dbo.sysservers WHERE catalog='AuditLog'
SELECT @ServerName2=datasource from master.dbo.sysservers WHERE catalog='Portal'
IF @ServerName IS NOT NULL SET @ServerName='[' + @ServerName + '].' ELSE SET @ServerName=''
IF @ServerName3 IS NOT NULL SET @ServerName3='[' + @ServerName3 + '].' ELSE SET @ServerName3=''
IF @ServerName2 IS NOT NULL SET @ServerName2='[' + @ServerName2 + '].' ELSE SET @ServerName2=''
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
CREATE TABLE #NonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
CREATE TABLE #MultipleNonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
INSERT #NonFinTran
EXEC('SELECT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, DateTime, '''', '''', '''', ''''
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''ChangeBillPayDefaultAccountEdit'',''ChangeExpiryUserPassword'',''ChangePasswordEdit'',
''ChangeUserPassword'',''ManageAddressMaint'',''ManageContactMaint'',''ManageSecretQuestionAnswerEdit'',
''ManageTransLimitMaint'',''OtherBankAccountMaintAdd'',''OtherBankAccountMaintDelete'',''OtherBankAccountMaintEdit'',
''WithinAmBankAccountMaintAdd'',''WithinAmBankAccountMaintDelete'',''WithinAmBankAccountMaintEdit'',
''SetAccountMaskPreferenceAudit'',''ChangeLoginIdAudit'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
INSERT #MultipleNonFinTran
EXEC('SELECT DISTINCT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, Audit.DateTime as AuditDateTime,
(SELECT DISTINCT SUBSTRING(A.BranchCode,3,3) FROM ' + @ServerName + 'AuditLog.dbo.CCAuditLogEntryView X INNER JOIN ' + @ServerName + 'Voyager.dbo.CCuser U
ON X.UserId = U.UserId INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_CustomerProfile P ON P.EnrolId = U.TAXID
INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_AccountListing A ON A.CIFNO = P.CIFNO
WHERE X.UserId = Audit.UserId AND A.AccountNo = SUBSTRING(Audit.TrxField1,11,16) AND P.CIFNO = A.CIFNO
AND (SUBSTRING(A.BranchCode,3,3) <> NULL OR SUBSTRING(A.BranchCode,3,3) <> '''')
AND CHARINDEX(''AccountID='', Audit.TrxField1, 1) > 0),
SUBSTRING(TrxField1,14,1), CASE WHEN CHARINDEX(''AccountID='', TrxField1, 1) > 0 THEN
SUBSTRING(TrxField1,11,16) ELSE '''' END, CASE WHEN CHARINDEX(''AccountType='', TrxField2, 1) > 0 THEN SUBSTRING(TrxField2,13,3) ELSE '''' END
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''SetAccountAttributesAudit'',''SetAccountFriendlyNameAudit'',
''AccountProfileMaintULDelete'',''AccountProfileMaintLHAAdd'',''AccountProfileMaintLSCAdd'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
SET @stmt = '
SELECT * FROM
SELECT BranchName,
CASE WHEN SUBSTRING(FromAccountID,1,6) IN (''519901'',''559409'') THEN ''DC''
ELSE
CASE FromAccountType WHEN ''01'' THEN ''SA '' WHEN ''02'' THEN ''CA '' WHEN ''03'' THEN ''FD ''
WHEN ''SA'' THEN ''SA '' WHEN ''CA'' THEN ''CA '' WHEN ''FD'' THEN ''FD '' ELSE FromAccountType + '' ''
END
END +
case when Len(FromAccountID) =16 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4) END
when Len(FromAccountID) =15 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3) END
ELSE FromAccountID
ENd
AS FromAcctNo,
CASE TrxId
WHEN ''AccountProfileMaintLHAAdd'' THEN ''Link Account/Card''
WHEN ''AccountProfileMaintLSCAdd'' THEN ''Link Account/Card''
WHEN ''APMFamilyFirstAdd'' THEN ''Link Family First Account''
WHEN ''AccountProfileMaintULDelete'' THEN ''Unlink Account/Card''
WHEN ''BalInqFD'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE ''Fixed Deposit Balance Inquiry'' END
WHEN ''BalInqCASA'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Balance Inquiry''
ELSE ''Current Account Balance Inquiry''
END
END
WHEN ''StopCheck'' THEN ''Stop Cheque Request''
WHEN ''CheckReorder'' THEN ''Order Your Cheque''
WHEN ''CheckInquiry'' THEN ''Cheque Inquiry''
WHEN ''TransHistFD'' THEN ''Fixed Deposit Transaction History''
WHEN ''TransHistCASA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Transaction History'' ELSE ''Current Account Transaction History'' END
WHEN ''StmtInqCC'' THEN
CASE WHEN FromAccountType IN (''DR'',''03'') THEN ''Debit Card Statement Inquiry'' ELSE ''Credit Card Statement Inquiry'' END
WHEN ''StmtInqDA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Statement Inquiry'' ELSE ''Current Account Statement Inquiry'' END
WHEN ''StmtReq'' THEN ''Printed Statement Request''
WHEN ''StmtInqIAMSTAR'' THEN ''E-AMSTAR Statement Inquiry''
WHEN ''Repayment/Transfer Inquiry'' THEN ''Repayment/Transfer Inquiry''
WHEN ''Account Inquiry'' THEN ''Account Inquiry''
WHEN ''Payment Inquiry'' THEN ''Payment Inquiry''
END AS TransType,
FirstName AS CustomerName,
TaxId, CONVERT(VARCHAR, DateTime, 103) AS Date, CONVERT(VARCHAR, DateTime, 108) AS Time
FROM #NonFinTran, ' + @ServerName3 + 'Portal.dbo.TB_Branch AS TB_Branch
WHERE
BranchId = TB_Branch.BranchCode
AND (TB_Branch.InstCode IN (''00001'', ''00003'',''001'',''002''))
AND (FromAccountType IN (''SA'', ''CA'', ''FD'', ''01'', ''02'', ''03'')))'
EXEC (@stmt)
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
Anil Kumar -
11g SOA Composite Rules Error - Rule session pool object does not exist
Hi all,
I'm hoping someone has experienced this and found a way through it. We're looking at exposing Oracle Rules DecisionFunctions via the automagically created web services in JDeveloper. We've tried several Rules examples, including the OrderApproval one available online, and are getting errors everytime we try and test the web service.
Firstly we get this error:
[2010-09-01T09:47:24.249+10:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IfAZ45P0FwI5yrDCiW1CV7Dc000AwY,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [composite_name: CR] [component_name: OracleRules1] [component_instance_id: 04c3bc86-9452-4755-9bbf-51591f1c7fff] [J2EE_MODULE.name: fabric] [dcid: 761c1dbb0eb1dbdc:-33082b47:12ac627683f:-7ffd-0000000000002aae] [WEBSERVICE.name: OracleRules1_DecisionService_1_ep] [J2EE_APP.name: soa-infra] [composite_instance_id: 130022] <.> Error caching the Decision Services metadata.[[
Error caching the decision services metadata for path default/CR!1.0*soa_f8581f86-106e-4f47-825f-89148db6663b/OracleRules1.
Check the underlying exception and correct the error. This is most likely due to a rule modeling isssue. Validate the rule dictionary in rule designer and fix any errors and warnings. If the error persists, contact Oracle Support Services.
Error caching the Decision Services metadata.
Error caching the decision services metadata for path default/CR!1.0*soa_f8581f86-106e-4f47-825f-89148db6663b/OracleRules1.
Check the underlying exception and correct the error. This is most likely due to a rule modeling isssue. Validate the rule dictionary in rule designer and fix any errors and warnings. If the error persists, contact Oracle Support Services.
at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1211)
at oracle.bpel.services.rules.impl.DecisionServiceCache.prepare(DecisionServiceCache.java:362)
at oracle.bpel.services.rules.impl.DecisionServiceImpl.preProcess(DecisionServiceImpl.java:221)
at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:609)
at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
at sun.reflect.GeneratedMethodAccessor1197.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy248.request(Unknown Source)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1169)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:768)
at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1168)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:996)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:562)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:222)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:185)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:430)
at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:477)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at oracle.rules.sdk2.datamodel.DecisionFunction.getGlobalTypeIDs(DecisionFunction.java:860)
at oracle.rules.sdk2.datamodel.DecisionFunction.validate(DecisionFunction.java:342)
at oracle.rules.sdk2.dictionary.DictionaryComponentTable.validate(DictionaryComponentTable.java:221)
at oracle.rules.sdk2.datamodel.DataModel.validate(DataModel.java:92)
at oracle.rules.sdk2.dictionary.RuleDictionary.validate(RuleDictionary.java:1093)
at oracle.rules.sdk2.dictionary.RuleDictionary.update(RuleDictionary.java:835)
at oracle.rules.sdk2.datamodel.DataModel.generateFactClasses(DataModel.java:115)
at oracle.rules.sdk2.dictionary.RuleDictionary.dataModelRL(RuleDictionary.java:1398)
at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1141)
... 44 more
And then we get the following error:
[2010-09-01T09:47:24.390+10:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IfAZ45P0FwI5yrDCiW1CV7Dc000AwY,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [composite_name: CR] [component_name: OracleRules1] [component_instance_id: 04c3bc86-9452-4755-9bbf-51591f1c7fff] [J2EE_MODULE.name: fabric] [dcid: 761c1dbb0eb1dbdc:-33082b47:12ac627683f:-7ffd-0000000000002aae] [WEBSERVICE.name: OracleRules1_DecisionService_1_ep] [J2EE_APP.name: soa-infra] [composite_instance_id: 130022] <.> [[
oracle.fabric.common.BusinessFaultException
at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1211)
at oracle.bpel.services.rules.impl.DecisionServiceCache.prepare(DecisionServiceCache.java:362)
at oracle.bpel.services.rules.impl.DecisionServiceImpl.preProcess(DecisionServiceImpl.java:221)
at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:609)
at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
at sun.reflect.GeneratedMethodAccessor1197.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy248.request(Unknown Source)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1169)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:768)
at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1168)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:996)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:562)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:222)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:185)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:430)
at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:477)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
And lastly this one:
[2010-09-01T09:47:30.437+10:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IfAZ5iO0FwI5yrDCiW1CV7Dc000Awd,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [composite_name: CR] [component_name: OracleRules1] [component_instance_id: 08f3eaa8-ce61-4ec9-a646-af821be06420] [J2EE_MODULE.name: fabric] [dcid: 761c1dbb0eb1dbdc:-33082b47:12ac627683f:-7ffd-0000000000002ab0] [WEBSERVICE.name: OracleRules1_DecisionService_1_ep] [J2EE_APP.name: soa-infra] [composite_instance_id: 130023] <.> Rule session pool object does not exist.[[
The requested rule session pool object for path default/CR!1.0*soa_f8581f86-106e-4f47-825f-89148db6663b/OracleRules1 and key OracleRulesSDK$OracleRules1 does not exist.
Check the underlying exception and correct the error. This is most likely due to a rules validation error. Validate the rule dictionary in Rule Designer and correct the validation error. If the error persists, contact Oracle Support Services.
Rule session pool object does not exist.
The requested rule session pool object for path default/CR!1.0*soa_f8581f86-106e-4f47-825f-89148db6663b/OracleRules1 and key OracleRulesSDK$OracleRules1 does not exist.
Check the underlying exception and correct the error. This is most likely due to a rules validation error. Validate the rule dictionary in Rule Designer and correct the validation error. If the error persists, contact Oracle Support Services.
at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:528)
at oracle.bpel.services.rules.rpi.oracle2.OracleRuleSession.execute(OracleRuleSession.java:260)
at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:331)
at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:634)
at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
at sun.reflect.GeneratedMethodAccessor1197.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy248.request(Unknown Source)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1169)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:768)
at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1168)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:996)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:562)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:222)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:185)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:430)
at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:477)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Has anyone had any luck actually getting this to work? If so, how? It simply seems like this particular aspect of the product is broken!
Your help would be VERY much appreciated!
Regards,
RhianHi SR,
Thanks for your response. I attempted what you've suggested (1=1 - asset new fact in output), however nothing has changed.
This is occurring across several Composite Rules projects, including the Oracle provided Chapter 5 Order Approval example. Unless someone can suggest a solution to this issues, it looks like we're going to have to shelf our plans to utilize the Business Rules component via the composite service.
Very frustrating couple of days, that's for sure! :{
Regards,
Rhian -
Sender File adpter --don't raise alerts when file does not exist in folder
Hi,
My Scenario is File --- >XI ---> SAP.
I must archieve the file after it got polled. and iam polling for every 60 mins, if the file does not exist,it is throwing an alert like "Could not process file '.file..xml: No such file or directory '
Is there any way i can avoid raising an alert if file does not exist in the source folder.
we are on XI 3.0 sp23?
Thanks
SriniHello,
Your Subject:
>Sender File adpter --don't raise alerts when file does not exist in folder
is contradictory to your question.
>if the file does not exist,it is throwing an alert like "Could not process file '.file..xml: No such file or directory '
> Is there any way i can avoid raising an alert if file does not exist in the source folder.
I know you want to say "Don't Raise alerts when file does not exist in folder". Correct me if I am wrong.
Some times it happens, when we write the right thing but it means something else and this is the reason many experts have replied, "how to raise an alert". So if you remove the word "Sender File adapter" from your subject then it will be easy to understand the exact meaning.
Regards,
Sarvesh -
Collection does not exist after update of session state
Attempting to leverage sample application code from Knowledge Testing 1.0 using apex v3.00 and getting ORA-20102: Application collection QUESTIONS does not exist
Note that the error is thrown in a cursor loop over that very collection (see bolded text below)
Can anyone shed some light on the subject?
Thx,
Derek
SFFD
procedure get_question
is
c pls_integer := 0;I NUMBER;
l_question pls_integer := 0;
--DEBUG
log_root number;
--/DEBUG
begin
--DEBUG
begin
select max(log_id) into log_root from fdrpts.log_entries where routine='QUIZ';
exception when no_data_found then
log_root:= fdrpts.log.add('INFO','QUIZ','Testing quiz functions');
end;
IF LOG_ROOT IS NULL THEN log_root:= fdrpts.log.add('INFO','QUIZ','Testing quiz functions'); END IF;
--/DEBUG
l_question := nvl(nv('KT_QUESTION'),1);
--DEBUG
log_root := fdrpts.log.add('INFO','QUIZ.GET_QUESTION','quiz.get_question('||to_char(l_question)||')',LOG_ROOT);
SELECT COUNT(*) INTO i FROM APEX_COLLECTIONS WHERE COLLECTION_NAME='QUESTIONS';
*fdrpts.log.add('INFO','QUIZ.GET_QUESTION',TO_CHAR(i)||' QUESTIONS IN TEST QUEUE',LOG_ROOT);*
--/DEBUG
if l_question > nvl(nv('KT_QUESTION_COUNT'),1) THEN -- wrap to beginning of test, page logic will handle quit.
--DEBUG
fdrpts.log.add('INFO','QUIZ.GET_QUESTION','KT_QUESTION ('||L_QUESTION||') > KT_QUESTION_COUNT ('||nvl(nv('KT_QUESTION_COUNT'),1)||') WRAPPING AND SETTING STATUS TO ''REVIEW''',LOG_ROOT);
--/DEBUG
wwv_flow.update_cache_with_write('KT_TEST_STATUS','REVIEW');
wwv_flow.update_cache_with_write('KT_QUESTION',1);
l_question:=1;
end if;
*for c1 in (*
SELECT
SEQ_ID,
c001 q_number,
c004 qtype,
c005 question,
c006 image,
c007 question_footer,
c008 question_header,
c009 answer,
trim(c010) WRONG1,
trim(c011) WRONG2,
trim(c012) wrong3,
trim(c013) wrong4,
c014 correct_answer,
c015 w1,
c016 w2,
c017 w3,
c018 w4,
c020 answer_given,
c021 get_time,
c022 post_time
*FROM APEX_collections*
*WHERE collection_name = 'QUESTIONS'*
order by c002
*) loop* -- NOTE: the order by c002
c := c + 1;
--DEBUG
fdrpts.log.add('INFO','QUIZ.GET_QUESTION','quiz.get_question SCANNING '||TO_CHAR(C),LOG_ROOT);
--/DEBUG
if c = l_question then -- this is the nth question in test's ordering method
wwv_flow.update_cache_with_write('KT_QUESTION_TEXT',htf.escape_sc(c1.question));
wwv_flow.update_cache_with_write('KT_QUESTION_FOOTER',htf.escape_sc(c1.question_footer));
wwv_flow.update_cache_with_write('KT_QUESTION_HEADER',htf.escape_sc(c1.question_header));
wwv_flow.update_cache_with_write('KT_QTYPE',nvl(c1.qtype,'PICTURE'));
wwv_flow.update_cache_with_write('KT_SELECTION',c1.answer_given);
wwv_flow.update_cache_with_write('KT_IMAGE','<img src="'||
replace(replace(replace(c1.image,
'#WORKSPACE_IMAGES'||'#',
v('WORKSPACE_IMAGES')),
'#APP_IMAGES'||'#',
v('APP_IMAGES')),
'#IMAGE_PREFIX'||'#',
v('IMAGE_PREFIX'))||
'" alt="picture" />');
wwv_flow.update_cache_with_write('KT_COLLECTION_SEQ_ID',c1.SEQ_ID);
--DEBUG
fdrpts.log.add('INFO','QUIZ.GET_QUESTION','quiz.get_question SESSION VARS SET',LOG_ROOT);
--/DEBUG
if c1.correct_answer = 1 then
wwv_flow.update_cache_with_write('KT_CORRECT','1');
wwv_flow.update_cache_with_write('KT_LABEL1',c1.answer);
wwv_flow.update_cache_with_write('KT_LABEL2',c1.wrong1);
wwv_flow.update_cache_with_write('KT_LABEL3',c1.wrong2);
wwv_flow.update_cache_with_write('KT_LABEL4',c1.wrong3);
wwv_flow.update_cache_with_write('KT_LABEL5',c1.wrong4);
elsif c1.correct_answer = 2 then
wwv_flow.update_cache_with_write('KT_CORRECT','2');
wwv_flow.update_cache_with_write('KT_LABEL2',c1.answer);
wwv_flow.update_cache_with_write('KT_LABEL1',c1.wrong1);
wwv_flow.update_cache_with_write('KT_LABEL3',c1.wrong2);
wwv_flow.update_cache_with_write('KT_LABEL4',c1.wrong3);
wwv_flow.update_cache_with_write('KT_LABEL5',c1.wrong4);
elsif c1.correct_answer = 3 then
wwv_flow.update_cache_with_write('KT_CORRECT','3');
wwv_flow.update_cache_with_write('KT_LABEL3',c1.answer);
wwv_flow.update_cache_with_write('KT_LABEL1',c1.wrong1);
wwv_flow.update_cache_with_write('KT_LABEL2',c1.wrong2);
wwv_flow.update_cache_with_write('KT_LABEL4',c1.wrong3);
wwv_flow.update_cache_with_write('KT_LABEL5',c1.wrong4);
elsif c1.correct_answer = 4 then
wwv_flow.update_cache_with_write('KT_CORRECT','4');
wwv_flow.update_cache_with_write('KT_LABEL4',c1.answer);
wwv_flow.update_cache_with_write('KT_LABEL1',c1.wrong1);
wwv_flow.update_cache_with_write('KT_LABEL2',c1.wrong2);
wwv_flow.update_cache_with_write('KT_LABEL3',c1.wrong3);
wwv_flow.update_cache_with_write('KT_LABEL5',c1.wrong4);
else
wwv_flow.update_cache_with_write('KT_CORRECT','5');
wwv_flow.update_cache_with_write('KT_LABEL5',c1.answer);
wwv_flow.update_cache_with_write('KT_LABEL1',c1.wrong1);
wwv_flow.update_cache_with_write('KT_LABEL2',c1.wrong2);
wwv_flow.update_cache_with_write('KT_LABEL3',c1.wrong3);
wwv_flow.update_cache_with_write('KT_LABEL4',c1.wrong4);
end if;
--DEBUG
fdrpts.log.add('INFO','QUIZ.GET_QUESTION','quiz.get_question LABELS SET',LOG_ROOT);
*fdrpts.log.add('INFO','QUIZ.GET_QUESTION','GET_TIME='||to_char(sysdate-nvl((to_date(c1.post_time,'YYYYMMDDHH24MISS')-to_date(c1.get_time,'YYYYMMDDHH24MISS')),0),'YYYYMMDDHH24MISS'),LOG_ROOT);*
--/DEBUG
-- set question generation time *THIS IS THE OFFENDING STATEMENT*
APEX_COLLECTION.UPDATE_MEMBER_ATTRIBUTE(
p_collection_name => 'QUESTIONS',
p_seq => c1.seq_id,
p_attr_number => 21, --GET_TIME
p_attr_value => to_char(sysdate-nvl((to_date(c1.post_time,'YYYYMMDDHH24MISS')-to_date(c1.get_time,'YYYYMMDDHH24MISS')),0),'YYYYMMDDHH24MISS'));
*fdrpts.log.add('INFO','QUIZ.GET_QUESTION','quiz.get_question READY TO EXIT',LOG_ROOT);*
exit;
end if;
*end loop;*
--DEBUG
fdrpts.log.add('INFO','QUIZ.GET_QUESTION','quiz.get_question EXIT',LOG_ROOT);
--/DEBUG
end get_question;LOGS
*LOG_ID DTTM ROUTINE TEXT*
7014853 04/23/09 11:40:57 QUIZ TEST 14
7014854 04/23/09 11:41:22 QUIZ.INIT_TEST quiz.init_test(2,918615994152352,'DEREK')
7014855 04/23/09 11:41:22 QUIZ.INIT_TEST 4/5 QUESTIONS RANDOMIZED
7014856 04/23/09 11:41:22 QUIZ.INIT_TEST RANDOM QUEUE CREATED 5 ENTRIES
7014857 04/23/09 11:41:22 QUIZ.INIT_TEST GROUP 2
7014858 04/23/09 11:41:22 QUIZ.INIT_TEST 4 QUESTIONS IN TEST QUEUE
7014859 04/23/09 11:41:22 QUIZ.INIT_TEST SESSION VARS SET
7014860 04/23/09 11:41:23 QUIZ.GET_QUESTION quiz.get_question(1)
7014861 04/23/09 11:41:23 QUIZ.GET_QUESTION 4 QUESTIONS IN TEST QUEUE
7014862 04/23/09 11:41:23 QUIZ.GET_QUESTION quiz.get_question SCANNING 1
7014863 04/23/09 11:41:23 QUIZ.GET_QUESTION quiz.get_question SESSION VARS SET
7014864 04/23/09 11:41:23 QUIZ.GET_QUESTION quiz.get_question LABELS SET
*7014865 04/23/09 11:41:23 QUIZ.GET_QUESTION GET_TIME=20090423114123*
13 rows selected.Edited by: derek on Apr 23, 2009 1:43 PM
Edited by: derek on Apr 23, 2009 2:06 PMHi Tyson,
If you look closely you will see that the routine already has access to the collection (which is, in fact, instantiated in a different procedure).
The routine has a debug statement to count and log the number of collection members; that statement reports 4 members in the collection.
Then the routine opens a cursor loop over that collection, calcs and sets some session variables and attempts to update the collection.
It is at this point (in the midst of the cursor loop over the same collection) that the collection does not exists is thrown.
Does it not follow that if the cursor loop has entered its first iteration, then the collection exists? How then does it cease to exist during the cursor loop (absent a call to one of apex_collection.delete_ methods)?
Derek
SFFD -
BPMon Alert Reporting - Query does not exist on server
Hello,
I am stepping through the BPMon Alert Reporting Analysis SP05+ guide. I am creating a report and have maintained the details with the template 0SM_BPM_WT0001N. When I try to access or preview the report I am faced with the following error:
The requested query 0SM_BPM1/0SM_BPM_Q0005N does not exist on the current server
Error when generating dataProvider
Any ideas?
ThanksHi Christoper
Another thought is, re-activate BPMon BW object.
Go to T-CD SOLMAN_SETUP -> Choose business process monitoring in left menu -> step 1.1
configure automatically. And execute all steps.
If you face some error due to BW job is nto running or something.
Then recommend re-execute BW job in SOLMAN_SETUP.
(Left menu ->Basic Configuration ->Step 5 configure automatically -> under the task you might see "Setup BW" so choose this and activate. Result of this, CCMS_BI_SETUP will run again. So chek whether there is active job in Sm37. After finish this job, try BPMon SOLMAN_SETUP that I mentioned above).
Best Regards
Keiji -
Alert Category TestAlert1 Does not exist
Hi ,
I have BPM scenario where I am trying to send an Alert as email . But I am not able to receive that alert in my mail box .
I created a Custom alery Category . For testing I tried to send it through tranction SE38 , run "RSALERTTEST" and gave alery category and the alert got successfully triggered and i got email in my mail box .
But when I try to send the same Alert through BPM i am not able to receive any mail .
Then I check my alert in transaction "SLG1" where it shows me a error as Alert Category TestAlert1 Does not exist .
I am not able to understand exactly what is missing .
Thanks ,
SuvarnaHi Suvarna,
Just for additional info i am providing you the step by step procedure for alert configuration please go through it compare it what you have done and see if the problem still persist.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also just check if this batch program (RSALERTPROC) is running or not.
The links below on Alert Management (ALM) will be of good help to you:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm">Forwarding Alerts to Alert Management</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm">Alert Management</a>
<a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Troubleshooting</a>
<a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Step by step</a>
Meanwhile look at these forum threads also:
Alerts not getting triggered from Adapter Framework
Alert Configs...
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
Regards,
Abhy -
Hi all,
I've installed SolMan 7.0 EHP1 and complete the initial and basic configuration using SOLMAN_SETUP tcode.
Then I connect a satellite system with SMSY tcode and setup the EWA configuration.
Now I want to create a EWA Report manually but when I run the REFRESH_SESSION from SDCCN tcode on satellite system the EarlyWatch Alert for Solution Manager Session does not appear.
Could you please help me?
Thanks in advanced
Moreno1. Did you setuo EWA in SOLMAN for that satelitte System? DSWP->Select the solution->Operations Setup->Solution Monitoring->Early Watch Alert->Setup Early Watch Alert.
2. If you have done this, then goto DSWP->Select the solution->Operations->Solution Monitoring->Early Watch Alert->Just click on the scheduled EWA. It will tell you why the session data is not collected from satelitte system though you ran REFRESH_SESSION at satelitte system.
OR
3. Check whether EWA is active at solman for that solution(Satelitte System).
DSWP->Settings->Solution Monitoring->Early Watch Alert
4. Check maintenace package and EWA is scheduled after you ran REFRESH_SESSION at satellite system(SDCCN), if so, then select the maintance package->click on details button(right side of the screen). Make sure that "Target RFC Destination" under Target System should be Back RFC of Solution Manager.
Hope this may help you.
Regards
Sanjai -
Hello friends,
Ive configured Alert Framework and I get Alerts via email. Under the mail there are 2 links:
<b>Message Monitor:</b> http://<host>:<port>/rwb_mdt/index.jsp?rwb=true&objectName=name=is.09.cip10,type=XIServerEngine&messageid=2C9535E009E111DC894B00300571D808
<b>Message Monitor (Safe Connection):</b> https://<host>:<port>/rwb_mdt/index.jsp?rwb=true&objectName=name=is.09.cip10,type=XIServerEngine&messageid=2C9535E009E111DC894B00300571D808
If I click on the first link I get this error:
MBean com.sap.XI:name=is.09.cip10,type=XIServerEngine does not exist
Stack trace for the above error message is:
com.sap.aii.rwb.exceptions.WrongMBeanException: MBean com.sap.XI:name=is.09.cip10,type=XIServerEngine does not exist
at com.sap.aii.rwb.core.XIComponent.getSubComponent(XIComponent.java:313)
at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedXIComponent(AppMainModel.java:151)
at com.sap.aii.mdt.web.MonitorDynPage.setNewComponent(MonitorDynPage.java:422)
at com.sap.aii.mdt.web.MonitorDynPage.doInitialization(MonitorDynPage.java:238)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:105)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
And for the second link I get a "page could not be displayed" error
How comes that XI makes these 2 links standard?
Do anyone has eny suggestion what to do and where to look for these errors?
Kind regards,
KamranHi Kamran,
the problem might be that in the Exchange Profile
the property 'com.sap.aii.connect.integrationserver.name' contains the
host name "HOSTNAME" (i.e. capital letters) whereas the Integration
Server registers with the SLD under "hostname" (lower case). The URL to the message
monitor is currently build from the Exchange Profile entry instead of
the SLD entry. This is usually not a problem since in general the host
names are given in small letters.
As a workaround, you can replace the Exchange Profile parameter
'com.sap.aii.connect.integrationserver.name' with "hostname" (lower case) and check if
that helps.
Regards,
Jaime -
Unable to login: SAP System Message: Dynpro does not exist
Hello All,
I'm created a test system to practice our upgrade post steps on. I created a pared down copy of one of our other systems. When I try to login, I get a popup message saying: Dynpro does not exist.
To create the pared down version, we used empty files for:
COEP
GLPCA
BALDAT
MSEG
BSIS
LIPS
LTAP
CE1LPOC
ZHYPFIT
BALHDR
VBFA
COSP
COSB
CDCLS
ZHYPF2A
/IRM0760
CDHDR
COSS
CMFP
CHVW
RESB
ZHYPFIO
AUSP
VBOX
JCDS
VBAP
We don't think these being empty is the problem, but I wanted to mention it just incase it is.
Below is the dev_w0 log. I've been searching Google / SDN / OSS for some of the errors but haven't come up with anything yet.
Any insight you might have into this would be appreciated. Thank you.
~TJ
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 79
M sid Q60
M systemid 324 (IBM iSeries with OS400)
M relno 7000
M patchlevel 0
M patchno 172
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 6396
M
M
M Thu Jan 22 15:12:50 2009
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 6396) [thxxhead.c 1290]
M ThInit: running on host USALSAPU
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jan 22 15:12:51 2009
C R3INLPGM: RmtExeLib from /usr/sap/Q60/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is KRNQ60700
C DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.
C DbSl/DB codepage check: table or row not found (db_rc=24) - OK.
C === Central DB connect successfull! ===
C === Connection settings ===
C connected = TRUE
C con_hdl = 0
C db_handle = 1
C dbhost = USALSAPU
C rdbname =
C dblib = R3Q60DATA
C r3sysle_changed = TRUE
C query_compl_reval = O
C dbconnecttype = L
C user = Q6079
C qaqqinilib = Default (QUSRSYS)
C dbjobname = WP00
C dbjobuser = Q6079
C dbjobno = 197762
C rmtexelib = KRNQ60700
C parallel_alter_tables = *OFF
C ===========================
C Found only default query options in QUSRSYS/QAQQINI.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = Q60
C Character encoding = UNICODE
C process class = dialog process
C workprocess id = 0
C local host = USALSAPU
C dbhost = USALSAPU
C rdbname =
C dbname = Q60USALSAPU
C dblib = R3Q60DATA
C application server = DVEBMGS79
C Connect type = LOCAL
C pid = 6396
C wpjobname = WP00
C wpjobuser = Q6079
C wpjobno = 197762
C DB2/400 vers. appl. server = PASE 1
C DB2/400 vers. DB server = V6R1
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = OFF
C allow_cancel = Try (Unspecified)
C nqe_optimize_method = O - All I/O (compatibility mode)
C nte_list_size = 10
C dbsl_alternate_package = OFF
C -
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090122 151250 USALSAPU
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0x7000002d0000000, size: 120000000)
M SHM_ROLL_AREA (addr: 0x7000002e0000000, size: 268435456)
M SHM_PAGING_AREA (addr: 0x7000002f0000000, size: 335544320)
M SHM_ROLL_ADM (addr: 0x700000310000000, size: 2672386)
M SHM_PAGING_ADM (addr: 0x700000320000000, size: 820256)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0x700000330000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0x700000340000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers created
B dbntab: Buffer FTAB(hash header) (addr: 0x700000360000088, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0x7000003600002d0, size: 1280008)
B dbntab: Buffer FTAB(item array) (addr: 0x700000360138ad8, size: 5120000)
B dbntab: Buffer FTAB(data area) (addr: 0x70000036061aad8, size: 122880000)
B dbntab: Buffer IREC(hash header) (addr: 0x700000370000088, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0x7000003700002d0, size: 1280008)
B dbntab: Buffer IREC(item array) (addr: 0x700000370138ad8, size: 1280000)
B dbntab: Buffer IREC(data area) (addr: 0x7000003702712d8, size: 15360000)
B dbntab: Buffer STAB(hash header) (addr: 0x700000380000088, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0x7000003800002d0, size: 1280008)
B dbntab: Buffer STAB(item array) (addr: 0x700000380138ad8, size: 1280000)
B dbntab: Buffer STAB(data area) (addr: 0x7000003802712d8, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0x700000390000088, size: 2976)
B dbntab: Buffer TTAB(anchor array) (addr: 0x700000390000c28, size: 1280008)
B dbntab: Buffer TTAB(item array) (addr: 0x700000390139430, size: 3200000)
B dbntab: Buffer TTAB(data area) (addr: 0x700000390446830, size: 23360000)
B
B Thu Jan 22 15:12:52 2009
B dbstat: table statistics switched on for 84171 tables
B dbstat: TABSTAT buffer created (addr: 0x7000003a0000000, size: 41152488)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000003b0000100, size: 350000000, end: 0x7000003c4dc9480)
B dbtbxbuf: Profile: max_objects = 40000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 104857600
B ***LOG BB0=> buffer TABL started with length 350000000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Buffer TABLP (addr: 0x7000003d0000100, size: 35840000, end: 0x7000003d222e100)
B dbtbxbuf: Profile: max_objects = 2000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 17590656
B ***LOG BB0=> buffer TABLP started with length 35840000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 29 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 80021 * 48 = 3841008
B 4: 40000 * 256 = 10240000
B 5: 80021 * 8 = 640168
B 6: 1 * 200 = 200
B 7: 513 * 8 = 4104
B 8: 262473 * 256 = 67193088
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0x7000003f0000108, size: 81920000, end: 0x7000003f4e20108)
B ***LOG BB0=> buffer EIBUF started with length 80000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 0x700000400000108, size: 4194304, end: 0x700000400400108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 40009 * 48 = 1920432
B 4: 20000 * 256 = 5120000
B 5: 40009 * 8 = 320072
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 65617 * 512 = 33595904
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 0x700000410000108, size: 40960000, end: 0x700000412710108)
B ***LOG BB0=> buffer CUA started with length 40000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR (addr: 0x700000420000108, size: 4194304, end: 0x700000420400108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#10 @ 2305] [dbcalbuf2305 ]
B dbtran INFO (init_connection '<DEFAULT>' [DB400:700.08]):
B max_blocking_factor = 20, max_in_blocking_factor = 40,
B min_blocking_factor = 10, min_in_blocking_factor = 10,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 1, prefer_in_itab_opt = 1,
B convert AVG = 1, alias table FUPD = 1,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Jan 22 15:12:53 2009
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1152, total = 3048
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 0x700000040000000
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0x700000040000768
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0x7000000400007a0
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0x7000000400007ac
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=/usr/sap/Q60/DVEBMGS79/sec, AS=USALSAPU, instanceid=79)
N SsfPseLoad: Downloading file /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse (client: , key: SYSPSE, len: 1872)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M CCMS: AlMsUpload successful for /usr/sap/Q60/DVEBMGS79/log/ALMTTREE (0 MTEs).
M CCMS: start to initalize 3.X shared alert area (first segment).
S
S Thu Jan 22 15:12:54 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x18499b440
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 400
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x700000460000070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x700000460000740
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A
A Thu Jan 22 15:12:55 2009
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 139532kb, dir_size: 34808kb.
A Attached to PXA (address 0x700000470000000, size 1998848K, 4 fragments of 464832K )
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=0x7000000b0577000 leng=20955136 end=0x7000000b1973000)
A >> Shm MMADM area (addr=0x7000000b0a50fa8 leng=244096 end=0x7000000b0a8c928)
A >> Shm MMDAT area (addr=0x7000000b0a8d000 leng=15622144 end=0x7000000b1973000)
A RFC Destination> destination USALSAPU_Q60_79 host USALSAPU system Q60 systnr 79 (USALSAPU_Q60_79)
A RFC Options> H=USALSAPU,S=79,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 47822 bytes at 0x7000004f0000000
N
N Thu Jan 22 15:12:56 2009
N SsfSapSecin: PSE /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/Q60/SYS/exe/run/libsapsecu.o .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.172.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [17]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E
E Thu Jan 22 15:12:58 2009
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Jan 22 15:13:03 2009
M SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
A
A Thu Jan 22 15:13:07 2009
A *** ERROR => RFC ======> cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62379446
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62377117, {4978D392-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62379446 IDX=2
[abrfcio.c 8185]
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62382527
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62382527 IDX=3
[abrfcio.c 8185]
A
A Thu Jan 22 15:13:14 2009
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62392457
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 3, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62392457 IDX=6
[abrfcio.c 8185]
B
B Thu Jan 22 15:13:16 2009
B table logging switched on for client '010'
M
M Thu Jan 22 15:13:22 2009
M AS400_API connected to 'USALSAPU'. DBJob: (197789/QUSER /QXDARECVR )M *** ERROR => AS400_API (APICODE 23) failed with SY-SUBRC = 9 [abas4api.c 1548]
M *** ERROR => Cannot open file '/usr/sap/transD60/config/infoapar.610' [ 0]
A A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:22 2009
A
A ABAP Program SAPMSYST .
A Source SAPMSYST Line 1770.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Dynpro does not exist.
A
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Jan 22 15:13:23 2009
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:23 2009
A
A ABAP Program SAPMS380 .
A Source Line 0.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Dynpro does not exist.
A
M ThIUsrDel: th_rollback_usrdelentry = 1
M ***LOG R47=> ThResFree, delete (001024) [thxxmode.c 1384]
S
S Thu Jan 22 15:14:20 2009
S found spool memory service RSPO-ACTIONS at 0x70000046000a478Hi TJ,
you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
But, based on that data, I do not know which ones ;-(
There are dynpro tables like dynpload or d3456t or so not proper ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de
Maybe you are looking for
-
Updateable Report/Pagination - rows found but not displayed
Bear with me if there is a post that covers this, as the SEARCH facility seems to be hanging when I search on Pagination. I have a SQL Query (PL/SQL Function Body Returning SQL Query) which creates an Updatable Report. If I run the Query and the sele
-
Laptop problem leads to ipod problem please help
hello to all the read this, after a virus on my laptop i had to restore it back to factory setting's now the only copy of my iTunes libury is on my ipod nano 8GB. I purchased the laptop and the ipod at the same time back in 2006 thus can prove its no
-
Mail: how to send out emails with graphics embedded?
I'm just wondering if the protocol has changed ... I'm wanting to send out multiple emails with a graphic, that will open in diverse Browsers, Apple and PC. Is there a way to do it without having to embed the graphic somewhere up on the web and writ
-
Character depiction is collapsed.
Character depiction is collapsed. (Occurrence yahoo auction in (Japan) Products List) ・this is confirmed in ubuntu 12.04 ubuntu 14.04 . ・Yahoo auction (Japan) Products list display abnormal. ・character depiction is collapsed. (Occurrence yahoo auctio
-
i have a workflow job to accomplish right now, starting with asking the user to fill a form, then the process finds the supervisor of the user and ending with delivering the form to him/her, sounds easy- really is. but the problem is that i want to s