EarlyWatch Report

Ladies/Gents
Can someone please confirm if I need to put on / activate statistics (RSA1->Tools->Settings for BI Statistics) to obtain query statistics results in the EarlyWatch report? I understand that statistics needs to be switched on if I want to analyse the RDSDSTAT* tables or load stats from Business Content BI Stats....but I can not determine if this is required for the EarlyWatch Report. I am specifically interested in the top five bad performing queries section in the EarlyWatch report but was not sure if this report reviewed all the queries in my BW system - as statistics is not switched on for all queries/info providers.
Thanks!

Hi
Check these notes 216952,1040343
3.2 TROUBLESHOOTING in Solution manager of docu EWA_non-ABAP.ZIP enclosed in SAP Note 976054
Everything will be step-by-step in this is notes,
Points if helpfull
Regards,
Neni

Similar Messages

Error while generating earlywatch report.

Hi Guru's
              I am having problem in generating earlywatch report.
In solution manager i find these errors:-
The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
Typical sources of errors are:
The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
Session number: 1000000002286
In source system tcode sdccn when i try to run Refresh sessions i get following error:-
31.05.2010     12:24:34      > Task rescheduled for 20100531125533 ( attempt 0001 )     /BDL/SAPLBDL11     0
31.05.2010     12:24:34     Refresh of session overview failed from destination SM_SMPCLNT100_BACK     /BDL/SAPLBDL11     0
31.05.2010     12:24:34      > Sessions cannot be refreshed from destination SM_SMPCLNT100_BACK ( SMP , 0020275310 )     /BDL/SAPLBDL11     0
31.05.2010     12:24:34      > You cannot log on (CUA system assignment missing)     /BDL/SAPLBDL11     0
31.05.2010     12:24:34      > error reading function module interface DSWP_API_SESSIONLIST_GET from SM_SMPCLNT100_BACK     /BDL/SAPLBDL11     0
31.05.2010     12:23:58     Refresh of session overview started from destination SM_SMPCLNT100_BACK     /BDL/SAPLBDL11     0
I have checked with the rfc's they are working fine.
Please help.
Regards
Akif

Hi Akif,
Could you please try deleting the RFC Connection and entering it again in the Managed system.
1) SDCCN
2) Goto-> Settings-> Task specific.
3) RFC Destinations-> Settings click on change mode.
4) Delete the RFC and then add the RFC Connection again and mark as Master and active.
Then check it, hope it solves the issue.
Thanks,
Raghavendra.

Earlywatch report setup - step by step

Hello All,
I was hoping to get some documentation, best practice or something, on the set up of earlywatch reports within solution manager. I'm new enough to SAP and everything with it that I will spend an hour on service marketplace but not find anything on how to do something. my email is [[email protected]]. Thanks in advance.

Hi Ryan,
The setup of SAP EarlyWatch Alert is descibed in the Application Help of SAP Solution Manager.
[http://help.sap.com -> SAP Solution Manager|http://help.sap.com/content/documentation/solutionmanager/index.htm] -> SAP Solution Manager -> Solution Monitoring -> SAP EarlyWatch Alert
Best regards,
Ruediger

Retrive EarlyWatch Report.

Hi experts,
I have follow the SAP Note. 207223 -Activating the SAP EarlyWatch Report at my DEV system.
Using the SDCC t.code I was able to see all the EarlyWatch session completed.
To my understanding, the completed SDCC-EarlyWatch session will sent data to SAP. Then SAP will be generate a report base on the received data, and then sent it back to my SAP-OSS-Inbox.
Is this correct? I have already running my EarlyWatch session everyday for a month. But never get any report in my inbox.
How can I get the EarlyWatch report?
Thank you.
ck chai

Hi Barry,
Thank for your reply.
I had just logged a message to SAP -OSS.
So this mean we need to tell SAP to generate for us.
Regards,
ck chai

BW statistics cubes having data like earlywatch report?

Trying to create reporting similar to the snapshots on the earlywatch report section 2. Looking through the statistics cubes but have not found the items below. Any suggestions on where I might find these? Since earlywatch recognizes changes since last report run I am assuming this data is stored in tables somewhere?
The following table shows the relevant performance indicators in various system areas.
Area Indicators Value Trend
System Performance Active Users 26
Avg. Response Time in Dialog Task 515 ms
Max. Dialog Steps per Hour 1413
Avg. Response Time at Peak Dialog Hour 479 ms
Avg. Availability per Week 100 %
Database Performance Avg. DB Request Time in Dialog Task 206 ms
Avg. DB Request Time in Update Task 210 ms
Database Space Management DB Size 57.62 GB up
Last Month DB Growth 0.50 GB up
Hardware Capacity Max. CPU Utilization on DB Server 100 % steady
Max. CPU Utilization on Appl. Server 50 % up
For BW:
Area Indicators Value Trend

Hi dear,
sorry for your manager, but in order to have this kind of information (look at this std cube http://help.sap.com/saphelp_nw04s/helpdata/en/52/e91c3b85e6e939e10000000a11402f/content.htm ) you have to activate the BW statistics recording BEFORE (as you can read in the file I suggested you in the previous answer)...but this can be useful for the future!
Hope it helps!
Bye,
Roberto
...and remember that some point is always welcome !

Customized "EarlyWatch" report

Dear Gurus!
Is there any solutions for customizing of a summarized look of EarlyWatch report. I mean can we add extra data (expand It) with diagrams or ... some workload tables (or specific fields from ST03N) to It?
Any information & tips would be appreciated!
Best regards,
Ivan

Hi Ivan,
the EarlyWatch Alert Report is fixed and can not be customized or enhanced by you.
As you have already found out on your own, you can configure individually Service Level Reports.
Service Level Reports aggregates information from EarlyWatch Reports, Central Performance History (CPU) and alerts from Business Process Monitoring.
In the setup of Service Level Reports, it allows you to de/select the chapters:
- System Configuration
- System Availability
- Key performance indicators
- Transactions with the highest system load
- History of response time
- Maximum resource consumption of the hardware
- Accounting Profile
- Trend Analysis
- Dump statistics
- Update errors and involved programs/transactions
- Transports
- Monitoring Objects from CCMS Central Performance History
You can set individual threshold for the KPIs:
System Performance         Max. Active Users
System Performance         Avg. Availability
System Performance         Avg. Response Time in Dialog Task
System Performance         Avg. Response Time at Peak Dialog Hour
System Performance         Max. Dialog Steps per Hour
Query Performance          Avg. Total Runtime of the BW Queries
Query Performance          Avg. DB Runtime of the BW Queries
Database Performance       Avg. DB Request Time in Dialog Task
Database Performance       Avg. DB Request Time in Update Task
Database Space Management DB Size
Database Space Management DB Growth
Hardware Capacity          Max. CPU Utilization on DB Server
Hardware Capacity          Max. CPU Utilization on Appl. Server
You can choose "Weekly" or "Monthly" aggregation of values.
Best regards
Ruediger Stoecker

Recomended CPU threshold percentages in EarlyWatch reports...

Hi,
In Solution Manager you are able to generate EarlyWatch reports that provide a traffic light for various system performance statistics.
Couold anyone tell me what the general thresholds are (i.e. at what percentage does the light change from green to amber, and amber to red) for CPU utilisation?
thanks
Brian

Hello Brian,
Unfortunately it is not possible to provide a list of all thresholds used in a EWA session as they are not all stored in a central
repository.
In Solution Manager you can access the software tool that is used to generate the EWA report from within transaction DSWP. From within this tool you can see most of thresholds that are used and the relevant ratings for each check.
You may also view this on your system to see what the actual values are set to.
You may also want to review this note:
322896 - Thresholds for important I/O Events(v$system_event)
Thanks,
Mark

How to clean old Earlywatch reports in Solution Manager

Hi,
We are using SOLMAN 7.0 for EarlyWatch alerts, everything is fine and EarlyWatch is generating Reports weekly. Now i had a concern on how to clean these Early Watch reports once they are like month old, Does SAP Standard Jobs take care of this or do we need to schedule any job that removes EarlyWatch alerts older than certain period.
Thanks

Yes there is....
In transaction SOLUTION_MANAGER, click onto the EarlyWatch Alert tab -> next to the create button there is a button that say DELETE. If you click onto that it will bring up all of your sessions which you can select to delete.
Hope this helps!

Problem in earlywatch report generation

Dear all, i installed a solution manager 4.0 sp12 and i would like to configure EWA self service using Solman 4.0.
I did these steps in the configuration:
A. In the satellite systems i configured the sld, using rz70, and connect the system to the sap gateway of solman.
B. Maintained SMSY and create the required trusted RFC connections from SM to satellite system. All connection and authorization passed in SM59. I used SAP_ALL/SDCCN_ALL role and assigned objects S_RFC*.
C. Assigned the system to a logical system.
D. Created the a new solution and activate "Solutions Monitoring > Earlywatch Alert"
E. Activated and maintained required RFC in SDCCN in satallite system.
F. I executed the rtcctool in the satellite system and all was ok.
G:I executed the SESSION_REFRESH in the satellite system, the session finisched successfully but it did not send the data to the solution manager.
Did I miss out any steps. Can any one share any help ?

Hi Luca,
do you have a red flag in transaction dswp under EWA reports? If you don't have a red flag or the sign for being scheduled for that satellite system, then you need to create it first.
If there is a red flag you should get this text:
Dates for this session are overdue
The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
Typical sources of errors are:
The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
Session number:
Besides the steps you have actived SDCCN in transaction SMSY under Environment? It needs to be activated from SolMan itself.
Regards,
Markus

Problem Displaying Earlywatch Report

I have setup solution manager 4.0, Configured Earlywatch. Now the Solution screen shows :
SAP EarlyWatch Alert 31.03.2007 QST (0020)
SAP EarlyWatch Alert 01.04.2007 PPD (0020)
SAP EarlyWatch Alert 01.04.2007 PPD (0020)
SAP EarlyWatch Alert 01.04.2007 QST (0020)
SAP EarlyWatch Alert 07.04.2007 PPD (0020)
SAP EarlyWatch Alert 07.04.2007 QST (0020)
SAP EarlyWatch Alert 07.04.2007 QST (0020)
Some of these show data is available. when i process the reports a background job is started:
SM:EXEC SERVICES 000000006300100
this job immeidately stops saying it is cancelled.
The joblog says this:
06.04.2007     20:12:47     Job started
06.04.2007     20:12:47     Step 001 started (program DSMOPBACK_AUTOSESSIONS, variant &0000000000054, user ID SOLMAN)
06.04.2007     20:12:48     Solution COMPANY is being edited (Operations)
06.04.2007     20:12:48     Trying to perform session 0010000000058
06.04.2007     20:12:51     ABAP/4 processor: SYNTAX_ERROR
06.04.2007     20:12:51     Job cancelled
How do i make sure that this job is executed successfully?
I am facing the same problem when i am trying to view the Service Level Reports.
how do i go about?
Does anyone have the exact steps required in setting up the solutions of Solution Manager?

Hi,
Check this note <b>763561</b>
Here's a part of note I copied.
SDCC_OSS uses its own logon details:
User: SDCC_NEW
Password: DOWNLOAD
Client: 001
                       To ensure SDCC_OSS can be created correctly, SAPOSS itself has to be maintained correctly. The best way to maintain SAPOSS is via settings in transaction OSS1, as described in note 33135.
It is recommended that SAPOSS also use 'Load distribution'; to achieve this use note 766505.
Is there a template against which I check these destinations:
Target host: /H/X1/S/sapdp99/H/X2/S/sapdp99/H/oss001
with
X1 = customer saprouter IP address
X2 = IP address of sapservX ( sapserv1 = 194.117.106.129,
sapserv2 = 194.39.131.34, sapserv3 = 147.204.2.5,
sapserv4 = 204.79.199.2, sapserv5 = 194.39.138.2,
sapserv6 = 194.39.139.16, sapserv7 = 194.39.134.35 )
System number = 01
                       When SAPOSS is updated, the copy SDCC_OSS must be updated manually. The best way to do this is to delete SDCC_OSS in SM59 and then recreate it, via
SDCCN -> Goto->Settings-> Task Specific -> RFC destinations
-> Change Mode -> Create destination to SAPNet R/3 Frontend
a) Destination to connect to SAP Solution Manager
The connections between satellite system and SAP Solution Manager are described in the configuration guide for SAP Solution Manager.
This will solve you problem.
Feel free to revert back.
--Ragu

Como configurar e extrair o EarlyWatch Report

Olá pessoal,
eu preciso configurar e extrair o Early Watch de alguns ambientes aqui no trabalho, vcs poderiam por favor me enviar alguma documentação ao um passo a passo q seja q posso me ajudar a fazer isso.
Desde já, muito obrigado.

Carlos, dá uma olhada na nota abaixo
1040343 - EarlyWatch Alert (EWA) for Solutions
e nesses links:
Setting Up EarlyWatch Alert - SAP Solution Manager - SAP Library
How to manually process an EWA report instead of waiting until the next scheduled date. - Solution Manager - SCN Wiki
Att,
Felipe

Two earlywatch reports for same instance in one Solution manager

Hi
i am trying to create two solutons for early watch reports for same instance. let me explain here.
In SAP Solution Manager: Active Solutions >>> i have two solutions like this
Solution                                                          Early Watch Alert Reports
Avnet Global Solutions         >>>> here i have configured the PR1, PB1 PCB instances
PR1                                      >>>>>here i configured the only PR1 instance.
so i have configured the same instance in two solutions.
i am not gettting the early watch report automatically after after configuring like this . but manually working fine.
when i kick of the report manually working fine.
here my question is ... do i can create two early watch reports in one solution manage for same instance or not. if yes then why i am not getting report automatically.
Thank you
Vish

Dear Paul,
Thank you for your response
this is what i got from SAP.
Hello Vish,
You can have the same system in different solutions. With regards
to why the report is not generating automatically, please review
SDCCN on the satellite system.
I dialed into the system and found that the SDCCN for PB1 is not
downloading the sessions from Solution Manager.
I would recommend that you deactivate and then activate SDCCN.
Tcode SDCCN -> GoTo - Settings - Task Processor - Deactivate
Tcode SDCCN ->Utilities -> Activate
Then create a Refresh Session task and verify if the upcoming sessions
are getting pulled down to PB1.
If you need help with this, please let me know if it is fine with you
if I make the necessary changes to get the system working.
Thank you in advance and best regards,
Jared Singh
SAP Active Global Support - Netweaver Web Application Server
could i know your comment

Using BW statistics to replicate count found on earlywatch reports.

The following table shows the relevant performance indicators in various system areas.
Area Indicators Value Trend
System Performance Active Users 26
Avg. Response Time in Dialog Task 515 ms
Max. Dialog Steps per Hour 1413
Avg. Response Time at Peak Dialog Hour 479 ms
Avg. Availability per Week 100 %
Database Performance Avg. DB Request Time in Dialog Task 206 ms
Avg. DB Request Time in Update Task 210 ms
Database Space Management DB Size 57.62 GB up
Last Month DB Growth 0.50 GB up
Hardware Capacity Max. CPU Utilization on DB Server 100 % steady
Max. CPU Utilization on Appl. Server 50 % up
For BW:
Area Indicators Value Trend

Hi,
Look at this
Have you mark these ods objects in rsa1->tools->bw statistics for infoprovider ? checkbox for olap and whm ticked
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5401ab90-0201-0010-b394-99ffdb15235b

Looking for a report to get all managed system components

Hi,
We are looking for a report to get the support pack level of managed system.
We can get that by going individually on each system entry in SMSY. Is there a standard report or a transaction in solution managed that can list the support pack level of all managed systems ?
Thansk you for your help.
Chak

Hi,
Another option you have -- provided that you are running EarlyWatch Reports on all of your systems -- would be to create a single Service Level Report.
You would create a variant that includes all of your systems under the Select for Reporting column. Then under the Content from Solution Manager tab select the System Configuration --> Select for Reporting box.
This System Configuration report will provide you will the hardware info (OS version, CPU, memory), database version, SAP software components/version, and the SAP kernel.
The SLR allows you to extract and aggregate segments of your EWAs into a single report.
Good luck.
Bill

Early watch report: Update of Frontend Release recommended

Anybody knows what file/object that is checked for the correct release in BI frontend check in the Earlywatch report ?
We are running GUI 7.10 on the PC´s checked but still the report says something like:
PC Name Current Frontend Rel. Current Front. Patc Recommended Front. Rel. Recom. Frontend Patch
XXX 3.50 11 7.00 16

Hi, Did you find something related with this issue? I got the same message every week.

EarlyWatch Report

Similar Messages

Maybe you are looking for