Earphones aren't recognized by iPod (no light and the earphones are loose fitting inside iPod)
My earphones arent recognised by my iPod touch, no red light, does anyone know what to do?
If the earphones work in other devices but not your iPod you very likely have a worn-out or damaged jack in the iPod. There are third-party place that will replace the jack or you can do it yourself if so inclined.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
DigiExpress.us - The iPad Repair Professionals
3rd Gen iPod touch Repair
Similar Messages
-
I have purchased 2 songs from itunes. They show up in itunes library on my computer, but when I sync ipod with computer, the songs do not transfer to ipod
Is your iPod configured to sync these tracks? How do you have your iPod set up to sync music from your iTunes library?
B-rock -
All the buttons work and stuff; however the volume and sleep/wake buttons don't click or feel tight enough to be new. The home button works fine though, but is loose. I have compared it to my friends and all theirs are tight and work fine. I bought my ipod at best buy. Im not sure they will replace it seeing as how I didn't buy insurance for it. Would the apple store replace it? ALL the buttons work, BUT are not tight. Also the battery charges way too fast (45 min). What should I do. Will it be okay? Help please.
Based on posts here, the loose buttons seem to be normal. Also, other users have report similar "fast" charging. That usually resolve after a number of charge/discharge cycles.
If y are concerned, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My ipod when i cut it on shows the ITunes icon and the usb plug icon on my ipod screen. so I plugged it into my computer and when it took me to the Itunes menu it says I needed to reinstall the proram to the manufactures settings and upgrade. My Ipod appears to be whiped clean. I does nothing now. It didnt reinstall or upgrade at all. I have 2 Ipods and I think things got crossed up with them.
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem -
I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs. in order to start rebuilding my music collection?
You should be able to recover the media with the tips in this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into a newly authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That should switch the assocation of the device to the new library but it is not something I've personally tested.
When you get it all working, make a backup!
tt2 -
My computer no longer recognizes my iPod Touch. And the iPod Touch does not recognize that it is connected to a computer. It has worked great for many days until today.
I’ve tried two different Apple cables.
I’ve tried different USB ports on the computer.
I have rebooted both the Mac and the iPod.
I’ve wiggled the cables and checked for dust in the connectors.
The iPod charges using this same cable connected to wall wart. That’s a good sign.
Both the Mac and iPod seem to work fine separate from each other. They just won’t talk anymore.
Mac mini
1.83 GHz Intel Core Duo
OS 10.4.11
iTunes 9.2.1
iPod Touch 32GB, version 3.1.3 (7E18), model PB533LLI found this possible solution on another support thread, so I tried it.
turn off iPod
hold Sleep and Home buttons to start it.
When Apple appears, let go of Sleep button, but keep holding Home button.
When screen goes blank, let go of Home button.
Connect cable and check iTunes to see if it has conencted.
This did not work for me.
I then turned off the iPod, restarted the Mac, and restarted the iPod normally.
I connected them with the cable, and it works like normal. :-) -
I have a 5th gen ipod and recently all of my video podcasts stopped showing up in my ipod. They still show up and play in itunes, just not in my video podcast list on my ipod. All of the podcasts are Quicktime Large. For some reason my ipod has stopped supporting Quicktime Large. Now I've had to redownload every video podcast as Quicktime Small.
Anyone have any ideas whether this is from the the software version 1.3 and if they'll fix it in the next update?I'm having same problem, but QT Small videos are also not getting synced.
-
I deleted all my playlists provided. However, they are still on my Ipod Touch. Now, when I sync my Ipod with Itunes then the lists are copied back into Itunes?
A playlist takes up almost no room. A few kB at most.
It is simply a list of songs in the library
Do you want the playlists or not?
Now, when I sync my Ipod with Itunes then the lists are copied backinto iTunes?
Do you want them copied back into iTunes? -
I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are not working I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...
bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
My ipod is disabled and the slide to unlock screen isnt coming up. how do i fix it
my ipod is diabled and the slide to unlock bar isnt coming up on the screen. when i plug it into itunes it tells me to enter my password on the phone before it can be used with itunes which i obviously cant due to the slide to unlock bar not being there. help me...
Place the iPod in recovery mode and then restore the iPod via iTunes. For recovery mode see:
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen -
what should i do if my ipod turned off and the batterie isn't dead and my computer wont respond when i plug my ipod in
hey there...i have the same issue i turned off my ipod and not i cannot start the unit again. I bought this in Dec and know for sure my batterie is good....please help......
-
I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?
Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport -
My ipod is disabled and the message requests to try again in 223004 minutes. I think it might have something to do with the date being set wrong before it went into disabled mode. Can you assist in enabling.
You'll need to connect it to the iTunes library you normally sync it with and restore it. If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you
Hi Jboudet,
Welcome to Apple Support Communities.
You can find some suggestions for troubleshooting your iPhone at these links:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Have a good one,
Jeremy
Maybe you are looking for
-
Hi all. What are the tables for the Service PO text for the line items. one text is comming for each line item. can any body help me to solve this issue. Thanks in advance, regards, Eswar.
-
Oracle SQL HELP with convert GMT to EST and DST and Date offset
Hi, I have a query that does not seem to work trying to convert a date field that is in GMT to est and using extract(timezone_hour FROM TO_TIMESTAMP_TZ as an offsetr HEre is my sql dtl.start_dt_gmt + (extract(timezone_hour FROM TO_TIMESTAMP_TZ( dtl.s
-
No. of child Items should be printed with the parent item at row level
Hi.. that the number of the child Items should be printed on A/R Invoice along with the parent Item at row level. I want to know whether this is possible through PLD or not . if yes, please let me know how ? Regards Rakhi Edited by: Rakhiatsap on Jul
-
I currently have a fishing website under a domain name, hosted by a service. Like most, the hosting service has size and bandwidth limitations based on how much one pays and they also have an adversion to streaming video. A MobileMe account with my v
-
How do I edit out the mouse pointer from Video Demos?
I have recorded a few short video demos and would like to leave the mouse pointer in so it can be seen, but on occasions I need to edit it out, is there a way to do this?