Earphones with Remote and Mic (for Voice Recorder??)

Hello, today I find this Earphones with Remote and Mic on Apple store:
http://store.apple.com/us/product/MB770
It will work on iPod touch (2nd generation), so does it mean the voice recorder app (bought from App Store) is going to work on the iPod touch (2nd generation) as well?? Or the Mic is just working for the phone function??
Anybody know?
Thanks.
Raymond

We were talking about the $29 ones...they seem to be out of stock online (?)..the $79 haven't been released yet....
here's some real cheap ones on amazon....varying reviews....other options listed as well...
http://www.amazon.com/Stereo-Headset-Built-Microphone-Button/dp/B000VVERJI/ref=s r1_1_s9rk?ie=UTF8&s=electronics&s9r=8a10809b1c651770011c93b305dd04c4&itemPosition=1&qid =1224523249&sr=1-1

Similar Messages

  • My Apple Earphones with Remote and Mic White For iPhone says: made ​​in vietnam. i want to know if they are OEM?

    My Apple Earphones with Remote and Mic White For iPhone says: made ​​in vietnam right in the cord. i want to know if they are OEM? here my email: [email protected], thanks.

    Accidental damage is not covered under the warranty but if possible to reset the screen without causing additional damage, the Apple Store should do this without charging for it.

  • Hello!  I need Apple (!!!) headphones for Ipod Shuffle 3! (only apple earphones with remote and mic!!!) Tell me, what distinguishes the model are presented in black and white boxes? They may differ in features? Can one model is more modern than the other?

    Hello!
    I need Apple (!!!) headphones for Ipod Shuffle 3! (only apple earphones with remote and mic!!!)
    Tell me, what distinguishes the model are presented in black and white boxes? They may differ in features? Can one model is more modern than the other?
    Thanks in advance!

    Hi Fencer1986,
    I apologize, I'm a bit unclear on your request. If you have questions about headphone compatibility for your iPod shuffle 3rd Gen, you may find the following article helpful:
    iPod shuffle (3rd generation): About headphone compatibility
    http://support.apple.com/kb/ht3472
    Regards,
    - Brenden

  • Using Apple Earphones with Remote and Mic on my Macbook

    Is it possible to use the remote to control volume on my macbook? I know the mic works but I can't get the remote to. Is it even possible to use the remote?

    I have a unibody Macbook with OSX 10.6.1 and it works with my Apple Earphones with Remote and Mic. However, whenever I plug them in to the Macbook it takes up to 10 seconds for the volume and tracking controls to start working on the earphone remote. Also, if there is music playing in iTunes, the audio drops out for about the same amount of time. The hardware buttons on the Macbook also stop functioning during this time. The same behavior occurs when unplugging the earphones.
    Basically, it seems like the Macbook is extremely slow when adding / removing the earphones as an audio control device.
    Has anyone else noticed anything like this? Thanks!

  • Does the ipod nano come with Apple Earphones with Remote and Mic

    does the ipod nano come with Apple Earphones with Remote and Mic

    Click on the Ipod gray tab at the top of this site.  There you will find all the information you need about the model iPod you wish to purchase. 

  • How to use 1-Year Limited Warranty on defective earphones with Remote and Mic?

    Hi everyone. I am wondering how I get my pair of earphones I bought last week at Best Buy "serviced" because the left side is not working correctly - it makes a strange humming sound when used on all devices I own while the right lacks the sound. I have the box of the product, the product itself but lack a recipt, but can prove I bought it using my Credit Card statement.
    Does anyone know do I get my earphones serviced/replaced etc. under the warranty?

    Take them to your local Apple Store/Genius Bar and show them the headset.  Shouldn't need a receipt.
    B-rock

  • 80GB ipod and Earphones w/ Remote and Mic

    Hi
    Has anyone heard of a firmware update that would allow people who own 80GB iPod classics to use the Earphones with Remote and Mic? I have one that I bought last year, and would like to give the new earphones a try.

    I highly doubt that, those headphones were created for the new shuffles.
    but you can probably use them for an iphone or your cell phone with an adapter unless the jack fits.

  • Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

    Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

    As far as I know, Apple sells no such configuration.  However, under Settings > General > Accessability, there is an option to play back audio in monoural mode, which would then play both halves of a stereo mix in each earbud.
    Hope that helps.

  • How does Apple EarPods with Remote and Mic(MD827ZM/A) work with iPod 3rd Generation

    I have recently bought EarPods With remote and mic (MD827ZM/A) for my old iPod shuffle (3rd generation) Software V 1.1,  capacity 2GB
    but these EarPods doesn't seems like working with my iPod, any possible solution ?

    You can also get an "adapter," that has compatible remote control buttons.  There are several such products, for example
    http://www.amazon.com/iLuv-iEA15wht-Adapter-Earbuds-Headphones/dp/B002RL9WE0
    You can then connect the any standard headphones to the adapter, including Apple EarPods.

  • Will the iPod touch come with Earpods with Remote and Mic?

    Will the iPod touch come with Earpods with Remote and Mic? Will they be the Sam that come with the iPhone?

    No, it does not come with Remote and Mic, but it will come with the new design. (dosen't say on tech specs)

  • Compatibility of Griffin Navigator with iPhone earphones w remote and mic

    Hello,
    Was ready to purchase the great Griffin Navigator remote and FM receiver, but was wondering if it was compatible for phone call thru the earphones using the earphone mic????
    Did some of you experiment it?
    However, I am looking fo a remote and FM receiver that will allow using the earphones mic for calls.
    Thank you in advance

    I highly doubt that, those headphones were created for the new shuffles.
    but you can probably use them for an iphone or your cell phone with an adapter unless the jack fits.

  • Using Mic for Voice Recording - and listening...

    Alright.. I have a MacBook and a Snowball USB mic. The Snowball works a-ok, the only thing is is that I can't hear myself while I'm recording. I can only hear it on playback. This might seem normal to some but I was hoping to have this set up like I'm accustomed to in an actual studio where you can actually hear your own voice through the headphones or even the speakers. I'm also using Garage Band. Anyone have any ideas on how to enable this? Is it just a simple little setting that I'm not noticing?
    Thanks in advance.

    If you're using Garageband then you should be able to hear yourself. Make sure the 'monitor' function is set correctly for the corresponding Garageband track by opening the right-hand panel and choosing it from the proper menu. Garageband also has a great 'Help' section in its top menu.

  • Condenser mic for voice recording - setup advice ??

    Hi All,
    Newbie to GB. Want to setup my condenser mic (3.5mm) to record voice tracks. The condenser mic was purchased with a HD Camcorder and works great for video. Currently the mic works through the "line-in" but at very low level. Done a little research and Hangtime recommends the use of a USB interface.
    http://www.thehangtime.com/gb/gbfaq2.html#recordlinein
    (thanks hangtime).
    I'm now looking at the griffin imic as an inexpensive solution. Before I drop my $$ on this guy, is this the best solution. (or will it do the job right??)
    Feedback appreciated.
    Matt.
    G5 D1.8 1GB/160/SD   Mac OS X (10.3.9)   Garageband 1.1.0

    My advice would be the same as CD's. If you have a Line-In, for the same price as an iMic you could get a small mixer like the Behringer UB502 Eurorack Mixer for about $38, add a 1/8" to 1/4" adaptor, and you'll have much better control than with the iMic alone.

  • I have had a iPod touch 4 on iOS 5.0.1 32gb and whenever I plug my apple earbuds with remote and mic the  /- buttons don't work

    I don't know why but the remote volume buttons wont work on my iPod. When I got it it was on running on  4.3.4 an it worked perfect but no it wont. Please help

    Try the standard fixes to rule out a sftware problem:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    If still a problem then an appointment at the Genius Bar of an Apple store is in order.

  • Remote and mic not working

    I got a earpods with remote and mic for my iPod touch quite while ago,
    it stopped working a couple of months ago, how can I fix this!

    First see if the earphones/mic/remote work with another device or if a know working one works with your iPod.
    If the iPod is the problem:
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Fix it yourself
    iPod Touch Repair – iFixit

Maybe you are looking for

  • Blank Pages

    We have a report with a master section, and two continuation sections. We are using the header layout for the master, and the main and trailer layout sections for the two lists of data that may have continuation pages. The number of records that can

  • USER UNABLE TO REFRESH DISCOVERER REPORT IN DISCOVERER DESKTOP 10g

    Dear All, HELP!!! A new user is unable to refresh discoverer Reports in Desktop. All priviledges have been granted to username in Disco Admin and Usre is able to log into oracle Apps. On the PC the user logged into someone else can log into Discovere

  • Grey out field

    hi, i wanna grey out field account assignment group in the header of billing document. Right now when im creating billing (VF01) before posting, it can be changed, we wanna these field cant be changed. Do we need user exit to do that or is there conf

  • Portal forms connecting to each other in tabbed page

    Well, here's a challenge...for me anyway. If the forms are created and they are published as portlets and in the tabbed page, is there a way to get the user to fill out 1 form and be passed automatically to the next? I haven't done this before, but a

  • PO Change O/P error- Maintain outgoing EDI-connection data for partner for

    Hi Experts , We are connecting our SAP ECC 6 ( Ehp 4) sytem to 3rd party system via SAP PI.  We already done all the settings..line Output detemination procedure, Partner Profile ( WE20) , Port creation , Condition Records..etc. We have PO Creation (