Earpods are not working.

They came with the iPhone and this is the first time I tried to use them. Anything I can do?

everything in the box is covered by the same warranty so yes there is
I'm suprised how many people don't this it's always been like that with all products sold by any manufacture
best first step is to try another headset any headset will do the headset connector called 3,5mm minijack have been using since the first walkmen in the 1980's
next step would be to try the headset in another device
then you can see if it's the headset which is defect or the headset connector of your phone which is defect

Similar Messages

My EarPods are not working so can I have a replacement?

Hello, my EarPods are not working that much and everytime I put them in the headphone jack, only the right is working and the left one doesn't. Sometimes when I stand and shake a little bit of my earpods, the left one is working sometimes for a little bit. so please help and give me a replacement on these headphones I still have warranty on it.

First verify that the problem is the headphones and not the iPod's jack.
Try another pair of headphones. If those work then Apple will exchange the headphones at not cost if they have not been abused
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Otherwise:
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

My earpods are not working can I exchange them if I have a one year guarantee?

My earpods are not working. Can I exchange them if I have a one year guarantee? Please help!

You can get them replaced or repaired.

HT201401 my earphones are not working on my iphone4 to play, stop or forward to other tracks or answering a call and i know its not the earphones as ive just paid out for a new pair at £27.99 and still wont work anybody got any advice as fed up honestly

anyone can you help my earphones are not working on my iphone4 and i know its not the earphones has just bought new pair and no joy I can not play, stop, forward to different tracks or anything cant answer call nothing end of ideas can anyone help pretty please

Yes there genuine apple earphones I have now blown down jack slot and silly enough I turned my phone off and now it's back on earphones working properly now feeling a wee but silly as such a simple thing got them working.
Thank you guys and I know where to come again if I need any further assistance.
Again thank you everyone

Text messages ringtones are not working in the Storm Two

Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon

Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L

Page Break In XML Publisher RTF Templates Are Not Working

Please refer to the Metalink Doc below:
Subject:      Page Break In XML Publisher RTF Templates Are Not Working.
Doc ID:      559111.1
Type:      PROBLEM
Modified Date:      24-MAR-2008
Status:      MODERATED
In this Document
Symptoms
Cause
Solution
References
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to:
Oracle XML Publisher - Version: 5.6.3
This problem can occur on any platform.
Symptoms
Using XML Publisher version 5.6.3 in 11.5.10.
Find <?split-by-page-break:?> syntax is ignored.
EXPECTED BEHAVIOR
Expect page breaks to occur at point set by "split-by-page-break:" code.
STEPS
The issue can be reproduced at will with the following steps:
1. Create a template.
2. Call split-by-page-break: inside a loop.
3. Output is not formatted correctly, page break call is ignored,
Cause
Unpublished BUG 5011628 SPLIT-BY-PAGE-BREAK NOT WORKING IF ADDED SORT WITHIN DYNAMIC GROUP
Unpublished BUG 5011628 matches the client issue as it is a call to split-by-page-break inside a loop.
Fix is in ScalableStringList.java version 115.4.
This is delivered in <Bug 6165466> XDOFX:CHR(N) FUNCTION FAILING.
Solution
To implement the solution, please execute the following steps:
1. Apply Patch 6165466 when it is released.
2. Test your report.
References
Bug 6165466 - XDOFX:CHR(N) FUNCTION FAILING
Keywords
XML~PUBLISHER; LOOP; DYNAMIC~GROUP; PAGE~BREAK;
Help us improve our service. Please email us your comments for this document. .

Hi JDev,
Check this out:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
Hope this might help.
Thanks

Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Keyboard and trackpad are not working, Keyboard and trackpad are not working

I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

How to delete video from iTunes library? del and shift+del are not working - no any reaction

how to delete video from iTunes library? del and shift+del are not working - no any reaction.

seb963 wrote:
Hi
Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

Some of the shortcut keys and directional keys on the keyboard are not working in FF 4 RC1 (i.e. Tab, Ctrl+C, arrow keys). They work fin in FF 3.6x and other applications.

Crtl+C, Ctrl+V, Ctrl+X, Tab, and arrow keys do not work at all in FF4.0b13 and later. I am not sure about earlier versions as this is the first version I have tried.

I found this helpful article (http://support.apple.com/kb/TS1381) and worked my way through the section "Some keys don't work as expected".
All the following functions/settings are disabled or turned off:
Text to speech / Speak selected text when the key is pressed
Slow Keys
Mouse Keys.
The keyboard viewer just confirms my list of keys that are not working.
Starting in safe mode makes no difference; nor does booting from the Mac OS X Install Disc and running Terminal from the Utilities menu. The same keys as before fail to work.
This seems to confirm that it's a hardware issue. Anyone have any suggestions?

Alerts sounds are not working after upgrading to iOS 7.1.2

Hi,
I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

I got this issue resolved.
It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
It has been fixed by cleaning the charger slot by toothbrush! with some
drops of a cleaner.
Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

Formula Columns are not working in Reports 10g

Hi,
We converted the reports developed in Reports 6i to Reports 10g. When we run the report in Reports 10g Builder everything works fine. But when we deploy the same report in Oracle Application Server and invoking the report the formula columns are not working ie., the fields/ placeholder columns which are based on the formula column are not displaying any values in the report.
Please, someone help us in this regard.
Thanks & Rgds,
M T

What version of Reports do you use..???
Greetings...

HT4623 Hi there, yesterday I updated Facebook and Viber. They are not working,Viber shows waiting and when try to launch Facebook all I get is a BLACK page. Help please

Hi there,
yesterday I updated Facebook and Viber, they are not working.
When I launch Facebook all I'm getting is a BLACK page and Viber is highlighted in grey and showing "waiting".
Help Please Please Please

Hello rulawa,
You may want to take a look at some of the standard troubleshooting steps for App Store apps found in the article below.
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Hope that helps,
- Griff W.

Email notifications are not working anymore

Hi guys,
I use Grid Control 10.2.0.2 on Windows, and email notifications for critical alerts are not working anymore.
I didn't change anything to the OMS configuration, it just stopped one day, and when I ask for a test email (in "Setup -> Notifications methods" of in "Preferences") it is successfully delivered.
I didn't find anything related to this in log files, and nothing that could help here or on metalink.
Can anyone help about that weird issue ??
thanks in advance
Antoine

Have you gone back over your notification rules?
have you tried just creating a new notification rule and testing it?
Also take a look at Note:356774.1. If you've applied any patches (or done partition maintenance) you may have inadvertently lost all your jobs, which will break the email notications.
If still no joy, then try Note:285093.1.
let us know how you get on.

Earpods are not working.

Similar Messages

Maybe you are looking for