Earpods don't work, but iphone still as warrenty.

I still have about 5 months of warrenty left on my iphone 5 and the earpods that came with my phone have stopped working. i can't still to my music unless if i move the cord  before the jack around. I was wondering if i could get them replaced? I heard you can get them replaced if you have warrenty on your phone. By the way I'm from Canada.

If they don't work then they will be replaced under your warranty unless you have caused damage to them.
Being in Canada your earphones will only speak Canadian English, eh.

Similar Messages

  • Earpods don't work with iphone 4.0

    Neither the music features or phone features work with my new set of Earpods on my iPhone 4.0.
    I can hear the sound, but none of the remote control features will work.

    The Earpods Remote remote is now fully operational. I dunno what happened, other than I really gave it a shove, even though it was plugged all the way in.
    Anyway, it's working now! 
    Thanks again!

  • Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help

    Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help. I try to go to settings and the volume won't go up there either I have the home button gesture and still the same. I try resting my iPad and nothing no sound work unless I have my headphones in. Do anybody know how to fix this

    Did you try rebooting the iPad? You will need to have some battery power for this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This may be helpful
    iPhone, iPad or iPod touch: Not responding or does not turn on
    Frozen or unresponsive iPad - Apple
    iPad: Unable to update or restore

  • My iPhone 4s keeps showing more space being used for photos than i have - i have deleted cache folders, unselect and reselect in iTunes and nothing appears to work my iPhone still shows 6.5 gig use of photos when i only have the  camera roll listed

    my iPhone 4s keeps showing more space being used for photos than i have -
    i have deleted cache folders, unselect and reselect in iTunes I read one post
    where they said keep syncing and in a couple days it would correct itself, that
    hasnt happened.  I have see others have the same issue but no solution and nothing
    appears to work my iPhone still shows 6.5 gig use of photos when i only have the camera roll listed

    i thought the photo stream only holds 1000 i usuaaly take each month and save them to iphoto but if thats the my ipad should say the same amount and it doesnt - it shows 2.5 gig which is correct for iphoto.  and i havent ever had that much but if for some reason icloud has that much saved how do i delete and again if it does why doesnt ipad show that amount _ HELP!

  • My speakers are not working but it still makes a sound when it boots up

    my speakers are not working but it still makes a sound when it boots up.

    Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article.
    2. If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    3. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    4. Reset the NVRAM.
    5. Reset the SMC.
    6. Reinstall OS X after backing up all data.
    7. Make a "Genius" appointment at an Apple Store.

  • My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
    Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

  • I can't connect my mac to my TV, I have the right cables and have done it right but I still doesn't get the macscreen on the Tv, what should I do?

    I can't connect my mac to my TV, I have the right cables and have done it right but I still doesn't get the macscreen on the Tv, what should I do?

    What are you getting on the TV?  Are you getting a completely blank screen, or are you getting a message similar to 'no input detected'?  Or are you seeing the spiral galaxy desktop?  If you go into System Preferences -> Displays then do you have an 'Arrangements' tab?

  • I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

    I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

    Settings>General>Accessibility>(scroll down to)AssitiveTouch and change to Off

  • Why the 3G connection with Wind don't work on iPhone 4S (iOS 5.0)??

    Why the 3G connection with Wind don't work on iPhone 4S (iOS 5.0)??

    Because Wind is not an officially supported iPhone carrier and Apple warns that using an iPhone on a non-supported carrier's network may mean that some features may not be available or work at all.

  • My ipad automatically jumps from one app to other. it automatically types things randomly. i dont know what it wrong. Have shown it in a service center. they have done factory reset but problem still persist.

    my ipad automatically jumps from one app to other. it automatically types things randomly. i dont know what it wrong. Have shown it in a service center. they have done factory reset but problem still persist.

    Likley a defective touchscreen.

  • I purchased an I pad giving my macbook to my husband.  His photo stream doesn't work but mine still goes onto macbook .  How can I stop that ?

    I purchased an I pad giving my macbook to my husband.  His photo stream doesn't work but mine still goes onto macbook .  How can I stop that ?

    Another item to consider is do you and your husband have your own iTunes accounts?  If so then log out of iTunes on your old Macbook and log back in with your husbands ID and password.  If not this post will self destruct in 10, 9, 8, ......
    OT

  • HT5622 I've can not   from the apple store. I cheched my visa account it still have money in it and the bank told me is working but I still can't buy stuff from the store . Why?

    I've can not   from the apple store. I cheched my visa account it still have money in it and the bank told me is working but I still can't buy stuff from the store . Why?

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    iTunes Store: Accepted forms of payment
    http://support.apple.com/kb/HT5552

  • Airport time capsule 2 TB. All is connected and Wi-Fi is working but light still flashes amber rather than solid green. I have tried to reset but this still happens. Is there a way to fix this or do I need to?

    Airport time capsule 2 TB. All is connected and Wi-Fi is working but light still flashes amber rather than solid green. I have tried to reset but this still happens. Is there a way to fix this or do I need to?

    You want to see a green light on the Time Capsule.
    Once you have set up the Time Capsule initially, a flashing amber light indicates that the Time Capsule has a message for you....possibly about a network condition or notice of an update that is available.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the amber dot and another window will appear to provide the current status....along with suggested actions to remedy the flashing amber light.

  • Earpod controls don't work, new iPhone 5

    My iPhone is four days old. I've used the earpods with it quite a bit but I'd never really tested the controls or noticed this before so I don't know if this is a new problem or a pre-existing one.
    The problem:
    The volume controls work but the center button only works when it wants to. Sometimes it'll stop or play a track, sometimes skip a track if I'm lucky but I've only got it to use Siri once (holding center button down). Something else I've noticed which I think is new or I wasn't paying attention before is that I hear a bit of static when switching between apps or moving to spotlight on the home screen, it's very mild and very short but it's there nonetheless, related perhaps?
    Any help would be greatly greatly appreciated as I'm very upset about this.

    Confirm that they are fully plugged into the headphone jack.
    Try the headphones that came with the device to verify it's not simply an issue with the connection.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Qosmio X870 - Internal speaker don't work but headphones do.

    I'm a little annoyed as this problem has seemed to have randomly occurred.
    Making it difficult to pinpoint what caused this/finding a solution... :(
    So after opening my laptop from sleep or hibernate, I can't remember which specifically and want to listen to some music, I notice there is none.
    I plug in my earphones, and there is sound. Both times the sound mixer is indicating sound.
    The speakers are the default device, green tick, and sound levels are picked up. "This device is working properly.".
    I actually let windows automatically find a newer driver version, which it surprisingly did, downloaded and installed - restart laptop. Still no sound.
    I read somewhere that it appears for some that the hibernation and or sleep mode on Toshiba laptops cause the audio drivers to behave strangely. But I don't now what kind of troubleshooting to do, to fix this.
    Or it could be hardware related, regarding the port/jack. I don't know. I pray its software.
    Please could someone help me and make me happy again
    Nigel

    Hi
    >Or it could be hardware related, regarding the port/jack. I don't know. I pray its software.
    I dont think its hardware related issue.
    As I understood the issue: the speakers work properly if the notebook runs in normal mode.
    The speakers dont work if the unit wake up from hibernation or sleep mode.
    I meet such issue on my 2nd notebook. The speakers did not work but sound appeared using connected headphones. I could solve this by sound driver update.
    But I think this isnt a universal solution.
    From my point of few you should try different workarounds.
    First of the notebook should be tested and checked using the Toshiba preinstalled system.
    The image has been configured and tested by Toshiba and usually everything should work properly. Therefore i would recommend you to use the Recovery disk (or HDD recovery procedure) in order to set the notebook back to the factory settings.
    The other workaround would be the uninstallation of the sound driver as well as other sound driver related parts.
    In device manager go to the sound, video and game controller
    Here uninstall/delete the
    - Realtek sound driver
    - nVidia High Definition Audio (if available)
    - Intel high definition audio controller (if available)
    After this short procedure reboot the notebook.
    Now you will need to wait until the deleted devices were recognized and installed again.
    After this process has been finished, check the sound availability.

Maybe you are looking for

  • Can't drag files/folders in list view

    This has happened on two Macs now. Once on a 2x3Ghz Dual Core MacPro on 10.5 and most recently on the latest X-Serve on 10.5 Server. On the MacPro, I wound up reinstalling the OS since I wasn't very far along in the setup. The X-Serve is still malfun

  • How to change width of separating lines of cells

    Could u explain me how can I do to make the lines into jTable less wide. Thanks a lot.

  • Audio Input Output on MacBook Pro 13 inch

    I want to buy a MacBook Pro 13 inch but the problem is the audio input output port. I usually need to use both jacks because in one I record my guitar and in the other I use my headphones. Is it possible to get a splitter and to make from one jack, t

  • HFM Drill back to FDM - 9.3.1

    Hi all, I need some help with the following issue. We are using HFM and FDM 9.3.1 and trying to configure drill back. I have configured the FDM URL in the HFM Server and Web Config Window and specified the FDM appname under the HFM app setting. When

  • Is this fixed in Logic 9?

    Can anyone tell me if this really annoying bug has been fixed in L9? If you select a region in the Marker Track and then use a keyboard shortcut to set your Locators by that region the Locators will always be shifted to the left of the region. Cheers