EAS Console - Not getting the option "Refresh security from Shared Services"

Hi,
In EAS Console 11.1.2.2, I am not getting the option "Refresh security from Shared Services" when I right click on Security (under Essbase Servers).
However, I can see this option via EAS Console 11.1.1.3 (current existing version).
Could you please let me know how can I get this option in EAS Console 11.1.2.2? Is this by any chance related to the option "Externalize Users"?
Thanks in advance.

Thanks a lot join for this information and your kind support .
One more question:
The owner of the Planning application is user 'hypadmin'.
I can see the SIDs of user 5001 a little different in both the versions. Is this ok?
Hyperion Planning 11.1.1.3 (Existing Environment)
USER_ID     SID ROLE SYNC_PSWD OFFLINE_ENABLED HUB_ROLES
50001          native://DN=cn=0fa19f8241602600:3b78a0e0:130926693d2:-78ba,ou=People,dc=css,dc=hyperion,dc=com?USER 3 2 0 5019
Hyperion Planning 11.1.2.2 (New Environment)
USER_ID     SID ROLE SYNC_PSWD OFFLINE_ENABLED HUB_ROLES
50001           native://nvid=54aec0428a3ba591:-44b7ca9b:13f03c114d2:-5d99?USER 3 2  4507
I have not yet performed "Externalize Users" yet in the new environment (11.1.2.2) throgh EAS Console. Is it required in the newer version 11.1.2.2?

Similar Messages

  • Error from EAS - "refreshing security from Shared Services failed"

    Hi,
    I was using Native only security in HSS for Essbase 11.1.1.3 and EAS allowed me to Refresh security from Shared Services. (Essbase security was already externalized to HSS.)
    However, after I added "MS Active Directory", and provisioned a MSAD user to a native Planning group, EAS errors out with "refreshing security from Shared Services failed" .
    I checked Essbase security and that MSAD user is not added to Essbase.
    From Essbase Log I see:
    Essbase failed to get roles list for [ESB:Analytic Servers:servername:1] from Shared Services Server with Error [32:1062:Failed to connect to the user directory [ HSS'sMSADname].
    I then tried to remove MSAD from our H Shared Services and see if this problem goes away. However, MSAD still shows on the left panel menu in H Shared Services. How can I get rid of MSAD?
    Any suggestions?
    Edited by: user643332 on May 12, 2010 12:05 AM

    Hi,
    Are you sure you have removed it from shared services, you may have just disabled it.
    You must restart the shared services application server to apply any changes made.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Essbase EAS - Refresh Security from Shared Services

    Hi All,
    Just went live with Essbase. We are using MSAD Groups in Shared Services for our users. I noticed that if we add a new user to a provisioned group, they don't automatically get access to Essbase. I believe I have to select 'Refresh Security From Shared Services' in EAS. I am nervous about doing this with users in the system as I don't want to accidentally boot them out. Is there any risk? Reports stopped? Users forced to logout? Smartview implications?
    I feel like I did it before and disrupted some users during development but I am not sure.
    Much Appreciated,
    Mike

    Thx. I just did it and it didn't seem to disrupt anything. I tested with a user with a smartview open, a report running and a WA dashboard on screen. It did mention that after refreshing the essbase server would be disconnected and i would have to reconnect but it didn't actually boot me out or disrupt any process.
    I guess it's okay to do on a live production system. ?
    Thx,
    Mike

  • Refresh Security from shared services.

    Hi
    When ever there are any changes in the security at shared services(LDAP) , I am doing a refresh security from shared services(@EAS)
    -in order to get these changes from shared services.
    Which is taking 30 minutes refresh ever time in our systems.
    Is there any other way to make quickone?
    Version - 11.1.1.3
    Thanks

    strange? We are still on 931 (Essbase on 9.3.1.6) and refreshing security is not necessary at all any more. It is even deprecated functionality. I always though that 11 did not have it too.^^^The end (or most of the end) of Essbase.sec came in a late patch of 9.3.1. It isn't there yet in 11.1.1.3, I think. It is in 11.1.2. There was not a lot of fanfare about the change although it's there in the patch notes.
    Regards,
    Cameron Lackpour

  • Refresh security from Shared Services fails - System11

    Hi All,
    WHen refreshing the Essbase security from Shared Services in System 11 we get the following error:
    Error 1051522: Essbase failed to get group's member tree with Error [CSS Error: Unknown error: Could not get exception message from exception object]
    We see the same error in the Essbase log.
    In the Shared Service Security CLient.log we get the following warnings:
    2009-03-03 16:12:58,294 WARN [Thread-108] CSS dll either not found in java.library.path or can't be loaded[Root Cause: D:\Hyperion\common\CSS\9.5.0.0\bin\css-9_5_0.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform ] com.hyperion.css.spi.impl.ntlm.NTLMTrustedDomain.<clinit>(Unknown Source)
    2009-03-03 16:12:58,294 WARN [Thread-108] Error initializing trusted domains or the workstation name.[Root Cause: getNtTrustedDomains ] com.hyperion.css.spi.impl.ntlm.NTLMTrustedDomain.<clinit>(Unknown Source)
    Has anyone come across this?
    Thanks for your help.
    Seb

    Hi Seb,
    I take it you are using NTLM as your external authentication.
    The error message means that it can't see css-9_5_0.dll in the path, if you are on windows make sure the path contains <drive>:\Hyperion\common\CSS\9.5.0.0\bin\
    If it doesn't update the environment variables, not sure if you need to reboot it may pick it up straight away, you can check by going to a command prompt and running echo %path%
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Refresh Security from shared services fails.

    Hello all,
    On our environment I went into shared services with admin rights and changed the native directory password. And from then on I have not been able to refresh the security of essbase server in EAS. I get the following error,
    Essbase failed to get roles list for [ESB:Analytic Servers:Servername:1] from Shared Services Server with Error [32:1062:Failed to connect to the user directory [Native Directoy].]
    Also I would like to know if native directory password means the password "password" which comes as default for the username admin. Am new to essbase and was under the impression that native directory password means the password "password" which came as default for the username admin. Please help, this is a production issue which started only because I changed the native directory password and now I need to get it fixed.
    Thanks.
    Edited by: Teddd on Jan 6, 2013 4:07 PM

    Please confirm the version of the Shared Services (HSS) and Essbase, EAS server.
    Also let me know, if the HSS, ESSBASE & EAS installed on the same box ?
    If they are on the different servers, ensure that there is no network communication issues.. (try performing telnet on the port from each other servers)
    E.g Open command prompt - telnet servername port (telnet HSS_SERVER 28080), hit enter.. if it shows the blank screen .. it is successful and there is no communication issues.
    Also you could try..
    On EAS server, add the below in windows registry under EAS... and restart the machine..
    ESS_CSS_JVM_OPTION1 = -Dcom.hyperion.css.socketTimeout=60000
    if you are not comfortable updating the registry contact you admin and ensure to take the backup before editing...

  • HT1766 i am trying to restore my iPad from a backup.  I do not get the option of restoring from backup.... I only get restore to orginal settings?

    I was attempting to update my ipad to the newest OS system and it crashed... I came back with it saying that it had an error and did not update.  Now I only get the iTunes logo on the ipad witht he usb cord picture. 
    I have gone into iTunes & it says I have to do a restore.  But it does not give me the RESTORE from Backup option.  Only the Restore to Factory Settings.  Is this normal?
    Thank you for any help you can give me.
    D

    Marrtin S wrote:
    Hi I am trying to restore my iphone from the itunes back and  it is asking me for a password, I don't ever remember putting a password in. how do i get the password reset?
    You can't get it reset; if you could there would be no point in having it. If you have an encrypted backup there are two ways this could have happened:
    You checked "Encrypt Backup" in iTunes at some time in the past, either intentionally or by accident
    You have a corporate MS Exchange account and your Exchange administrator installed a security profile on your phone that requires the phone'a contents to be encrypted. This, in turn, requires the backup to be encrypted for obvious reasons.
    In either case you were prompted for a password the first time you backed up after whichever of these happened. So think about what you might have entered for a password at that time. Fortunately you get an unlimited number of tries. Other threads on this subject have shown that it is always a password known to the user, so it wasn't something made up by iTunes. Also, everyone who has figured it out has found it to be a different password type, so try your Apple ID password, your computer's login password, your WiFi password, your corporate domain password, etc. And try passwords that may have been changed since your first backup. As a last resort there is a professional password cracker available, but it isn't cheap - it's targeted at the law enforcement market - from Elcomsoft. There are also some scam password crackers available that don't actually work and possibly steal your information. It's likely that a developer of one or more of these will post a response with a link (possibly hidden) to their "product". So before clicking any links you might want to install the Web of Trust plugin that keeps track of scam sites and warns you. http://www.mywot.com.

  • Refreshig security from shared services

    let us assume that we are creating 5 users in shared services and provisioning them with different privileges. when refreshing these users security from shared services to essbase , i need to refresh the security of only one particular user role, how can i do that?

    if using 9.3.1 later version u can use Shared servicves patch whcih will automatically update the security
    or esle right clik on EAS security > refresh security from shared services > all users or currecnt users
    which will update ur security
    Refresh each user or group individually using MAXL command:
    alter user username sync security with all application;
    alter group groupname sync security with all application;

  • HT5312 not getting the option to reset security questions when we sign into security questions

    we are not getting the option to resent security quesions when we are attempting to answer the questions.  We have a back up email saved but why are we not getting this option on the security question page?

    The reset link will only show if you have a rescue email address, which is not the same thing as an alternate/secondary email address. If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699

  • HT5312 I have a rescue email and I forgot my password answers. When I enter incorrectly, I DO NOT get the option to send reset security info email to.... Please help. Thanks

    I have forgotten my apple id security questions/answers. I have a rescue email address but I do not get the option to send a rescue email to ...
    Please can you help.
    I have locked myself out!!
    Thanks

    1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
    2. Here are two different but direct methods:
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contacting Apple for support
            and service.
    3. For other queries about Apple ID see Frequently asked questions about Apple ID.
    4. Rescue email address and how to reset Apple ID security questions
    5. For online assistance use Apple - Support - Express Lane

  • I have an iPad 2 and the newest apple tv. I do not get the option on my iPad to mirror on AirPlay. I've tried all the suggestions I've seen. Does anyone have a new idea?

    I have an iPad 2 and the newest apple tv. I do not get the option to turn mirroring on in the AirPlay function. I have tried the suggestions I've seen on here so far, but nothing has worked. Has anyone come up with a fix to this problem?

    Your Apple TV and iOS device (iPad) need to be on the same network subnet.  If they are you can verify when playing that the ATV is set as the output device by clicking the icon to the the right of the fast-forwrd button.  Or you can double-click the home button and swipe left twice to see this.

  • HT1848 I am not getting the option to deauthorise my computer and authorise a new computer when in the itune store.  dont  know what to do.

    Not getting the option to deauthorise my old computer which isnt here anymore and then authorise my new computer.  What do I try next?

    If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
    If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (94368)

  • If someone messages my iphone 6 with the new quick video option when I get it I do not get the option to keep. Therefore it never vanishes. If I send a quick message video to them it has keep listed below the video on theirs.

    If someone messages my iphone 6 with the new quick video option when I get it I do not get the option to keep. Therefore it never vanishes. If I send a quick message video to them it has keep listed below the video on theirs.

    1. Every iPod, since the first generation model back in 2001 (of which I am proud to be an original owner) has always scratched on all surfaces – front, back, you name it, but basically everything scratches and this is nothing new. If you toss your shiny new cell phone into your pocket with your car keys it is also bound to be scratched. Just because the iPod costs about ten times more than your cell phone doesn't mean that the iPod is scratch-proof or will stop a bullet.
    If you go out and buy a brand new, scratchless BMW are you going to expect it to never get a scratch or fingerprint on it? Excuse me, but get real or get a case for it.
    2. Transferring video to the iPod was meant to be "easy" for videos that you have purchased over iTunes. It gets more complicated when you want to "back up" your DVDs or avi files that you have on your computer. Unfortunately, QuickTime Pro is not the fastest option for converting to m4v format. There are dozens of applications out there that will rip your DVDs to your hard drive and a handful more which will take this file and convert it to an iPod-friendly format.
    3. It's possible to use your iPod with more than one computer without it being erased. When you connect the iPod to a computer which isn't the first one you used it with, it will say that the iTunes library is not the same one on your iPod and whether or not you want to overwrite the iPod. Obviously you can click no. In the iPod's preferences (found in iTunes), click "manually transfer songs and playlists". You can now take single songs or entire albums from your secondary computer and put them on your iPod.

  • I was trying to merge my iPhone contacts with my mac.  However, after the info tab at the sync I do not get the option to merge.  only overwrite the iPhone or the mac.

    I just set up my iphone at the cell phone store - they transferred my contacts from my phone (not mac/iphone related)  I now want to merge my iphone contacts with that in my mac.  Aftere the uncheck the "Automatically sync and info tab.  I do not get the option to merge the two.  Only options to overwrite the mac or the phone.
    Any suggestions?
    Thanks

    this problem has been solved

  • When I click  + to add another sheet I do not get the option to enter new sheet or new form just a blank tab. What can I do

    When I click "+" to add another sheet I do not get the option to select A new seet or A new form - just a blank page into which I cannot anything. How can I fix this.

    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Restore the default home page
    * https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page
    Check and tell if its working.

Maybe you are looking for