EAS -- Outline Edit memory question

Hi Team,
When I am opening an outline for EDIT it gives me the below warning. Can you please let know your thoughts.
" EAS server has 54MB available memory, and estimated memory needed to open the outline is 133MB. Do you want to continue opening the outline? ".
I appreciate your time on this.

Thanks John for your input.
I have websphere in my environment. And below is the JVM properties that is set. Based on the below can you suggest which settings that I should change.
Initial Heap Size: 256 MB
Max Heap size : 512 MB
Generic JVM arguments : -XX:PermSize=128m -XX:MaxPermSize=512m

Similar Messages

MSI K8N NEO Platinum Edition memory question

Hi there,
I've currently got a MSI K8N NEO Platinum Edition (Nforce 3) motherboard and 2X 512 MB Corsair Value Select memory modules (both double sided) running at DDR 400 - this runs completely stable and has done for a number of months. I would like to increase my memory to 1.5 Gig but there seems to be a lot of issues?
I originally planned to buy an additional 512 Meg Corsair value select chip and place it in Bank 3 - is this acceptable?
I assue that i would have to drop the speed down to DDR 333 from 400, could anyone tell me how much of a difference this actually makes (when playing FPS games Doom3 etc..) ?
Any help would be greatly appreciated as i've been looking through both this forum and the Corsair one and i cant seem to find the answer.
thanks in advance !

Just note that there are combinations of two sticks that will also make the board run in DDR333 mode (see page 2-8 of the manual). For example, using two double-sided sticks in DIMM2 and DIMM3. I've actually managed to get it to work at DDR400 in those two slots, but it's not perfectly stable and overclocking diminishes drastically. Bottom line is the system will work fine when forced to DDR333...as long as you don't expect to overclock the RAM to any significant degree.

How to delete a member in the EAS Outline by writing a script

Hi,
I have to delete a member from a the EAS outline. Tried deleting it manually. It throws a error stating that outline cannot be saved. Hence they restarted the services and i was able to delete the member manually. I later had a thought that may be we can write a calc script to delete that particular member. First i have to delete all the data in that member and then the member is empty after that delete the member. Not sure if we can do it. Can we do this process. If yes how do we need to go ahead with it. If there is any option pl. do let me know. I would like to avoid the manual deletion hence would like to automate.
It is a BSO cube.
Can anyone help me regarding this?
Regards
Praveena

To echo Glenn, if this a pure Essbase database (and I think it is), ODI's member deletion would be through a dimension load rule. There are multiple threads on this board about "remove unspecified". If there's another way to do it, I'd love to hear it.
However, if this the back end to a Planning application, ODI can do member, children of member, descendant deletes, etc. It all depends on what the target environment provides.
Regards,
Cameron Lackpour

Memory question on Arch x86_64. 2x2048 MB = 3950 MB?

I have a naive memory question for some knowledgeable folks. My machine has 2x2 Gb sticks which should total to 4096. When I do a free -m under Arch, it's only showing 3950. Is the remaining 146 reserved or..?
$ free -m
total used free shared buffers cached
Mem: 3950 422 3528 0 28 157
-/+ buffers/cache: 236 3714
Swap: 2000 0 2000

Thats a really good question and the result you get is normal as far as I know.
Part of it (a small part I believe) is used by the kernel, the rest of it, and this is where things are not so clear, is reserved as an agp apperture.
As far as I could tell (I have stumbled uppon that too) the problem seems to be that some bioses don't setup everything as they should.
The thing is that some devices can only handle 32bit addresses so their address is somewhere until the 4GB mark, because the bios doesn't setup the memory remapping correctly (sometimes the user has no way set anything related to memory remapping, this seems to be the case with some desktop boards and most notebooks/laptops). This memory remapping "problem" was anticipated and there are ways to properly handle that.
For some reason unknown to me (and most people that have stumbled upon this) many bioses don't setup (or allow the setup) of proper remapping. To add to the problem the kernel seems to reserve 128MB of agp aperture by default even if you don't have an agp card, this reserved address space falls in the first 4GB of addressing space therefore stealing you some memory.
I have tried to regain those MB, I have tried to recompile the kernel with a different config and I've tried several kernel boot parameters and the only thing I could regain was 64MB if I recall correctly. I can't find now what I have added to regain those 64MB, I didn't keep that option in the kernel line, 64MB were not worth the possibility of having problems later on.
I know its a pain to have that voice in the back of your head telling you that there is some memory that is being wasted, specially if you have tried a 32bit kernel with support for 64GB of address space and got 4050 MB of usable memory, but just leave it as it is, it's not worth the time and the trouble.

Memory Question "4x1 Gig or 2x2 Gig?" what is faster?

Memory Question "*4x1 Gig or 2x2 Gig*?" what is faster?
I'm still don't know if witch to choose?
4 times 1 gigabyte Ram Memory is cheaper but if I choose for 2 times 2 GB Ram I can always beef it it later.
And is my memory faster if I'm using 4 slots with 1 gig over 2 slot with 2 gig?
I'm asking this question because I think using 4 times the memory bandwidth will be faster?
http://www.janmaartendewit.com

Hello Jan
Welcome to Apple Discussions
The iMac (Late 2009): Installing or replacing memory article and your User's Guide are pretty clear, they both say that +"You can use 2 GB or 4 GB RAM SO-DIMMs of 1066MHz DDR3 SDRAM in each slot."+ and not 1GB modules. > http://support.apple.com/kb/HT3918
To upgrade your ram you will want at least 2 more 2 or 4GB modules and add that to the current 2 x 2GB of ram. > http://eshop.macsales.com/shop/memory/iMac/DDR321.527
Dennis

How to edit the question that I have asked here

hello I have asked a question in this webstart forum , that has a sensitive information so I got to chage it immediately ...
I didn't knew it before I ask, that these questions are visible in google, because now my manager found that question in google search with my project name
I got to remove those words from that questions
can any one please help me how to do it ?
I didnot find any thing that can help me to edit a question that I have asked in the past... but it is very important and urgent please help me
thank you ...

Thanks a lot for your help
ya I have observed that google catche is having it for many days and I have contacted google too to remove the catche
and here in java forums I have contacted Sun and they have deleted that question
so thanks a lot and have nice time over ther
all the best
babaiii

HT1918 How to edit secury questions.. Coz i forgrot my answers to my previous questions. Now cant purchase any app.

How to edit secury questions.. Coz i forgrot my answers to my previous questions. Now cant purchase any app.

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
      Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
      like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
      tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
      "done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
      Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
      should be asked to verify your security code for the credit /debit card and NOT the
      security questions.
d. At this time you can remove the card by going back in to edit the payment info and
      selecting "none" as the card type then saving the changes by selecting "done". You
      should now be able to use your iTunes store credit without answering the security
      questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

View/Edit Calc and Formulas including entry signs (-/+) on EAS outline

What's the fastest way to view and edit the calculations and formulas including the signs (-/+) used when entering data in Hyperion Planning form specifically on the P&L account dimension. Would calc script contain this functions, like the dat file?

if i understand your q u would be looking for order for calc how it works?
Member1 (+)
Member2 (+)
Member3 (-)
Member4 (*)
Member5 (%)
Member6 (/)
Member7 (~)
above is the order

Issues with WMV HD Editing & Newbie Questions

Hi,
I am new to PE7, so apologies if some of these have been asked b4, I searched but couldn't come up with direct solutions.
I mainly edit HD WMVs, raw HD videos and MPEGs, to be used on PCs and on the internet. Most used output would be HD 1280x720(wmv).
I am having problems with HD WMVs in PE7, they don't seem to play smoothly for editing, clipping etc(choppy and jumpy are the words that come to mind). At first, I thought this was a memory issue( I have 3 gigs on a Vista computer with a Dual Core processor), but then decided to try editing a couple of HD MPEGs (same size) and these played smoothly, allowing be to make precise splits etc.
What would be the best setting for editing WMV HD files(as I said, mainly 1280x720 input and output)? I tried the HD and AVCHD settings(when starting the new project), no joy. Is there some way to tweak PE7, or adjust the settings when editing WMVs, or in general, is it best to import MPEGs?
Next question - I am going to be doing quite a lot of editing over the next few months. Do people find Vista or XP more stable to use with PE7 and Premiere Pro and how much memory would be best for optimal perfomance? If I have to get an XP PC for editing, then that's what I'll have to do. Right now, I'm trying out PE7 and I'm sure I'll have to upgrade to Premiere Pro in a few months, so please bear that in mind.
Any other suggestions, tips and useful links, greatly appreciated.
Thanks

PE7 handles HDV MPEG2 natively... so if you look at a clip on the timeline it will have no line above it, if you look at a HD WMV file on the timeline it will have a red line above it. For the HD WMV file to play back smoothly on your computer (depending on how "beefy" your computer is) you will have to hit the Enter key on your keyboard to render the clip. After rendering the clip will play back smoothly and have a green line above it.
If you are editing 1280x720 HD WMV you could use the HDV 720 30p project preset... however whatever project preset you use you will always have the same need to render the clip.
PE7 and PPro works well with either WinXP or Vista. For editing high definition video I would go with 4G RAM (well your computer will only be able to access 3.2G+ of the RAM). More important is the processor, especially if you venture into editing AVCHD. A fast Quad core is ideal.

Nokia Email 3.21 update & phone memory question

I just updated to Nokia Email 3.21sucessfully, and it seems to be similar as it was previously on my C5-00.
Some old emails I open are not in bold and some are, is that down to whatever the format of the original email was in?
One other question I wanted to ask was that I updated using the Software Updates app on the phone, and I had no choice of where to install the update to, it seems to have installed to the phone memory. Is it normal for to install to the phone memory instead of the card memory? or is there a way to move it or perhaps it doesn't work properly unless it's on the phone memory.
Say there is another update, does the update delete the previous email client files as to not clog up space within the phones memory.

I hvae an E72 and I can edit messages that I want to forward.

NVIDIA GeForce 8600M GT with 512MB vs. 256MB - MEMORY QUESTION

how much difference will i see between the NVIDIA GeForce 8600M GT with 512MB of GDDR3 memory, and the NVIDIA GeForce 8600M GT with 256MB of GDDR3 memory??
i will be doing HD editing on FCP.

All FX Plug class effects in FCP will benefit with that beefier card. Also Motion and Color will benefit. You'll see a smother preview in Motion, and faster renders in Color. In FCP, you'll see more RT playback of unrendered effects if they are the FX class effects as well. Go with the beefier card. It will only serve you down the line too. The movement in software architecture is to offload CPU cycles to GPU cycles, and will continue to go that way as far as I can see, so the beefier card will pay for itself down the line too. Do it now, and it will cost less as well.
Jerry

Memory Question (please advise)

Hello all,
I recently built this system as follows:
Case: Thermaltake Lanfire Xaser III /w Purepower 420 Watt PS
Mobo: MSI 865PE Neo2-P Platinum Edition
Proc: Intel Pentium 4 2.8c (Northwood)
Ram: Kreton Xtreme Speed T-Rex PC3700 DDR466 (2x512)
Video: ATI Sapphire Radeon 9800 Pro 128MB DDR
HD: Seagate 80GB IDE Ultra ATA 100 2MB Cache
OD: Lite-On 16x DVD 52x32x52 CD-RW
OS: Microsoft Windows XP (Home Edition)
While it's still early enough to RMA any parts if neccessary, I'm trying to determine what if anything might need replaced. So far what I've dicovered is most everything seems to be functioning properly except there may be a problem with the ram. Here's what happens, each stick of ram seems to work flawlessly, alone. However, when using both sticks together in any combination, whether dual or single channel (consistent results in all combinations of single & dual channel slots), there seems to be a lot of errors. The computer will boot & load windows ok, & CPU-Z will report all aspects of the ram correctly (size, speed, timing, channel configuration etc.), but downloads & installs get corrupted & the computer will reboot randomly. Also, cannot get an uncorrupted install of windows with both sticks of ram in. Using MemTest 2.5 there are no errors with either stick seperatley, but with both sticks together (no matter what combination of single or dual channel slots) it gets constant errors & says the memory is bad even though the pc seems to run ok, untill corrupted downloads or installs show up.
So I'm wondering if anyone may know if there is any setting or something that may fix this, or perhaps the ram is bad & new ram will work fine with 2 sticks, or is there any possibilty the problem could be with the main board & 2 sticks of ram will never function properly at the same time? Or any other ideas? I really don't want to have to return any of the parts if possible, but being limited to 1 stick of ram is not a viable or acceptable option (although it works ok for the time being) on a pc which is built to perform & should have no problem with 1GB of ram in dual channel mode.
Thanks in advance for any advice or tips anyone may have to offer.
Edit - wrong forum, meant this in main, no overclocking is involved with this issue.

you must try another kind of ram first , if the problem didn't solve then its the mobo. who has the problem.
try kingstone or hynix they are the best with this board

865pe neo2-p Memory question

HI all
Hope someone can answer me a question
I have a 865pe noe2-p mobo , i have just stuck in x 4 1 gig ddr400 mem modules
The Specs of the board state as per MSI site that this board can support 4 gig , yet my bios is only reporting 3.1 gig
Mem modules are showing as dual channel in bios
Bios version is up to date ver 3.a , as per live update
CPU intell celeron 2.53 ghz clocked up to 2.92 ghz
4 gig Kingston DDR400 mem
Nvidea 6600
sata hdd's , 500 gig and 160 gig
is there something i am missing here to enable this board to see 4 gig of mem as per the specs of the board
I am only running XP and fully understand the SW limitation ,
I do not see this as being issue with SW , this seems to stem back to the board not picking the correct amount of ram installed
Has anybody else see this ?
Is there a resolve ?
Thanks in advance
Tadkin

Quote
is there something i am missing here to enable this board to see 4 gig of mem as per the specs of the board
I am only running XP and fully understand the SW limitation ,
I do not see this as being issue with SW , this seems to stem back to the board not picking the correct amount of ram installed
The software limitation you are talking about is only one side of the coin. The memory adress decode space of the chipsets memory controller is restricted to 32bit addressing before software (operating system) ever comes into play. Part of this adress space needs to be reserved for other system devices and cannot be used for system memory addressing. No mainboard featuring an Intel 865PE Chipset was ever (or will ever) be able to fully address 4GB of system memory. This is a chipset rather than a board or BIOS limitation. It is not even a problem but a hardware restriction that was only overcome severl chipset generations later (Intel P965 and 975X to be precise).

Memory question

I have a couple of questions about memory.
1. I have Corsair TwinX XMS PC3200 2x1024mb. settings at corsair are 2.5-3-3-6 It shows up in speedfan as:
FSB-DRAM................. CPU/14
CAS# Latency............. 3.0 clocks
RAS#to CAS# Delay..... 3 clocks
Ras Precharge...............3 Clocks
Cycle Time(tras).............7 Clocks
Bank Cycle Time(trc)......10 clocks
DRAM IdleTimer.............16 clocks
I just want to run it at a better speed to get the most out of it.
2. Plus my MB supports DDR266/333/400 modules. Does that mean I can't run the 433/500/533/550?
When I started to overclock I had the DRAM set on 400 and with the OC it went to 424. with no problems. Then I had to drop it to 333 to keep OCing and got the DRAM up to 198 running stable. I had to drop the FSB so eventually the DRAM went to 184. I ran Sandra with the 424mhs setting and the 184mhz setting and the 184mhz setting was really a lot quicker...so I stayed there.
Now how can I get better speeds out of the memory? Would it be better to buy a different memory to achieve my goals?

MR,
You Stated :
1. I have Corsair TwinX XMS PC3200 2x1024mb. settings at corsair are 2.5-3-3-6 It shows up in speedfan as:
FSB-DRAM................. CPU/14
CAS# Latency............. 3.0 clocks
RAS#to CAS# Delay..... 3 clocks
Ras Precharge...............3 Clocks
Cycle Time(tras).............8 Clocks
Bank Cycle Time(trc)......12 clocks
DRAM IdleTimer.............16 clocks
I just want to run it at a better speed to get the most out of it.
The figures you posted above look more like figure you would have gotten from the memory Tab in CPU Z. Can you confirm this and also post all figures you get form the SPD Tab in CPU Z regarding your RAM. If you RAM setting are set to Auto in BIOS then the above figures are really your SPD readings that were applied by your BIOS Auto RAM setting feature. The CPU Z SPD read out will confirm this. If this is the Case then you have Corsair TwinX2048-3200 Kit (3-3-3-8) vice the TwinX2048-3200C2 (2--3-3-6*) with the asterix annotated as [* These parts support 2-3-3-6 latency on Intel platforms, and 2.5-3-3-6 latency on AMD platforms.]. Double check your product number on your RAM and pay perticular attention to letters and/or numbers after TwinX2048-3200....> Check result against listing the TwinX matched pair memory listing here http://www.corsairmemory.com/corsair/xms.html
Plus my MB supports DDR266/333/400 modules. Does that mean I can't run the 433/500/533/550?
You could likely use memory up to DDR 500 on your board if you wanted to OC and leave ram at 1:1 ratio. Higher memory would be wasted money.
Good luck,

Memory Question for G4 Cube

In accordance with recommendations on a previous question here I have ordered OS 10.4.6 from Apple to install on my Cube. The Apple rep said it would work with the 384 MB ram I now have in the computer. I think I will add more memory though and the Apple rep advised I visit <www.crucial.com> to get it as Apple no longer stocks memory for the Cube. The spec for memory in the Cube manual says to use "PC-100" synchronous DRAM (SDRAM). The crucial.com site recommended a 512MB chip that says it is "PC-133" and implies it will work, guarantied. Will it?
It will be 2 weeks at least before Apple will ship the OS 10.4.6 package as it is on backorder. I know I will have some questions on installation when I get it.
JTB

PC133 RAM is usually less expensive than PC100. The cube has 3 slots, and the max you can install is 3 x 512 megs. If all three slots are already filled, you will have to remove one of the modules and replace it with the 512 you plan to buy. I would personally stick with PC100, particularly if the modules that will remain are PC100.
I usually buy my RAM from Ramdirect. Their prices are competitive, and they have always stood behind what they sell - there is a lifetime guarantee. I will recommend them without reservation.
http://www.ramdirect.com/vcom/index.php?cPath=1723
(I have no relationship with the company, other as a satisfied customer.)
Installing the RAM is dead easy, but you might want to download a service manual.
http://cubeowner.com/manuals/cubesvc_man02.pdf

EAS -- Outline Edit memory question

Similar Messages

Maybe you are looking for