Easiest way for multiple Themes in one book please.

I am doing a book for my gf for xmas and I would like the family style for the old pics of her father but then would like something modern for the more recent pics of her.
thanks in advance!
Aj

Not really - but you can do two books and print pages from one to iPhoto and then place the resulting pages as full page photos into the other one
see this thread for further discussion - http://discussions.apple.com/thread.jspa?threadID=1818897&tstart=0 - and this one - http://discussions.apple.com/thread.jspa?threadID=1815663&tstart=0

Similar Messages

Is it possible to combine multiple Pur Reqs for multiple materials to one vendor into one PO through MD07?

We have material planners who use MD07 (traffic signal screen) Stock/Requirements List, Collective Access tab to review material requirements by MRP Controller. Once the list is created, they select individual materials and review them in MD04. In a lot of cases, Purchase Reqs (PRs) are reviewed and adopted into POs individually for each material. Sometimes they will combine multiple PRs for one material into one PO. This is a good practice. However, from what I have found, it is not possible to combine multiple PRs for multiple materials into one PO. If this was done it would dramatically reduce the number of POs that we are issuing to suppliers. Problem statement: We issue too many POs which causes additional influxes down the line (receiving dock/goods receipts processing, receiving issues, invoices, invoice issues, etc.). Does anyone know of a way to address this problem without a major overhaul in approach or customization of the system? Thank you in advance!

Hello Michael
As far as I know, this is not possible directly from MD07, only from the MM transactions.
The following thread suggests the following procedure to convert several PRs into one PO:
Conversion of multiple PR into single P.O
Drag and drop the first PR from the item overview to the shopping card on top of ME21N,
then open the PO detail delivery schedule tab and drag and drop all other PR to the shopping card shown in the schedule tab
You can use the same procedure, calling the order conversion from MD07 and then drag and drop another PRs into this PO.
BR
Caetano

I want to use my ipad to display song lyrics. I have all the lyrics on my computer in Word format and want to know the easiest way to convert them to my ipad and what apps I should use..

I want to use my ipad to display song lyrics. I have all the lyrics on my computer in Word format and want to know the easiest way to convert them to my ipad and what apps I should use.

I would just leave them in Word...GR reads many formats very easily.
If our goal is to work on/edit the files it may be useful to look into something like Pages if you have a Mac, and the Pages for iOS devices so you could use the same word processor on both machines.
But if you convert the Word to PDF and then use GR you can still edit the files...GR will edit and annotated PDF files rather easily.

My father-in-law's photo library has thousand of "stock photos"(such as the guitar from garage band) surrounding his actual photos. What is the easiest way for me to clean this up for him? Karen

My father-in-law's photo library has thousand of "stock photos"(such as the guitar from garage band) surrounding his actual photos. What is the easiest way for me to clean this up for him? Karen

Can you tell me how to do that and how to do it without erasing his actual photos which are intermingled?
ThanK You.
Karen
PS We are only in town for a few more hours & I'd love to get this done for him. He's in PA & I'll never be able to walk him through this by phone:)

I have iOS 6 on my iPhone. i have linked my contacts with facebook and yahoo, which has doubled or triplicated some of the contacts. how can i integrate them into one? please help. it is getting on my nerves. thanks :)

I have iOS 6 on my iPhone. i have linked my contacts with facebook and yahoo, which has doubled or triplicated some of the contacts. how can i integrate them into one? please help. it is getting on my nerves. thanks

click on the contact which you want to integrate, click the edit button scroll down u will find a option called link contacts use it to link it to the duplicate contact

I have two Apple IDs. Is there any way to consolidate them into one?

I have two Apple iTunes accounts and didn't realize it for a while so some of the music I purchased is associated with one account and some music is associated with the other. I was wondering if there is any way to connect the two accounts and consolidate into one so that all my music is connected to one account and I don't have to manage the account separately?
Thanks and I appreciate any input!

From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

Idea for iTunes: Slideshow for "Now Playing" (new suggestion for multiple artwork in one song)

As some may know, you can put more than one album art (picture) in a song. When it's done, the "Now Playing" window, which usually showcases the artwork of the song playing, would have a small right/left arrow beside it. When pressed, you switch to a new artwork.
However with the recent updates on iTunes, that arrow button's disappeared. Now it's as pointless as ever to put multiple pictures. My purpose with this feature is to put album covers and the single artwork together, only if they are the first tracks of whichever album. (Yes, I like to stare at the album covers while listening to music).
IDEA - Why not have the "Now playing" window fade between pictures like a slideshow? So for example, Kelly Clarkson's "Stronger" album's 1st track "Mr. Know It All", a single that bears its own artwork. Putting the album and single cover in the song while playing, they'd alternate between pictures every 5 seconds.
I just think that if you can put more than one picture in a song, might as well make use of it. There are a lot of albums that have singles as track no.1. Some have a great single artwork but can't be shown because it needs the album cover. This would make a great compromise. It might even be more neat to put a real life picture of you or someone or a place you know because the song reminds you of .
What do you guys think?
(Say is this normally the way to suggest them ideas or do I just e-mail them a customer support form?)

Since this is a user-to-user forum, for better results with Apple, give them feedback at:
http://www.apple.com/feedback
That will get the informatin to Apple.

How to install applications for multiple iPads with one ID?

Hey guys,
I have to prepare many iPads for work, and I've found the process to be very redundant. In order to ensure that the applications are tied to the ID of the final client, I have to first create an account under my email, download all the applications and then change the email to the client's. Now when I have to prepare another device, I have to delete the applications in iTunes and re-download them with a new account to make sure they are tied to the next ID. Is there a way to download and sync all the applications under one ID, and not have issue with updates in the future? Keep in mind I'm only installing free applications.

I was referring in particular to the logs that are created by Workshop
itself (in the workshop directory). It creates workshop.log and netui.log.
Raj Alagumalai wrote:
Steven,
which workshop log file are you referring to ?
the workshop log files are usually saved to the domain directory.
If the developers are each going to start their own server instances then
there should be no issues.
The best option for you is to create multiple domains for each developer.
They will share the same workshop installation, but they will each have
their own instances.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Steven Ostrowski" <[email protected]> wrote in message
news:[email protected]..
Hello,
What is the best way to install the WL 8.1 Platform for multiple
developers on a single UNIX machine? These developers may start
concurrent instances.
The problems I see are that the log files generated by Workshop would
be shared among concurrent users, permissions would need to be set so
that the user that is running the instance that creates the log files
will need to create the file with permissions that everyone can use. Are
there any other issues to doing this?
I could not find the information on this in the documentation.
Thanks

HELP: Customizing ESS Leave Request for multiple entries in one submission

Hi experts,
I appreciate help on this urgent problem. We're on ECC6 with EP7. My customization requirements are below:
1) Allow multiple leave entries to be submitted at one go. Standard ESS only allows one date range entry per submission. We've customized the Webdynpro Leave request form to allow multiple entries in table form.
Assuming there's 3 requests:
R1 ~ 01-Oct-2007
R2 ~ 03-Oct-2007
R3 ~ 05-Oct-2007
Whenever user clicks 'New Entry' button, Webdynpro will call bapi PT_ARQ_REQUEST_PREPARE to generate a new request ID.
When user clicks on 'Review' button, I will loop at the requests internal table and check each of the entries, which is an individual request, via BAPI PT_ARQ_REQUEST_CHECK. Am I doing correctly so far?
The checks return no error. Next comes the problem. When I click the 'Send' button, I will loop at the request IDs (in ascending order) into BAPI PT_ARQ_REQUEST_EXECUTE. I will get a dump, saying that the object cannot be found. Debugging shows that it cannot find the first request ID (R1) in the memory. I found that if I sort the request IDs in descending order, it will be able to find the last request (R3) and could process it. However, when it comes to the 2nd last request (R2), it will give me the same dump saying that object can't not found. Both R1 and R2 cannot be found whereas only R3 can be found.
In overview, the logic we adopted is like this:
1) PT_ARQ_REQUEST_PREPARE-CREATE (R1)
2) PT_ARQ_REQUEST_CHECK (R1) upon clicking 'New Entry' Button
3) PT_ARQ_REQUEST_PREPARE-CREATE (R2)
4) PT_ARQ_REQUEST_CHECK (R2) upon clicking 'New Entry' Button
5) PT_ARQ_REQUEST_PREPARE-CREATE (R3)
6) PT_ARQ_REQUEST_CHECK (R1, R2, R3) upon clicking 'Review' Button
7) Loop PT_ARQ_REQUEST_EXECUTE ( R3 - Returns OK, R2 - Returns object not found and terminates, R1 - not processed because execution terminated by R2).
Can anyone please advise me how I should go about changing the BAPIs? Or are the CLASSes/BADIs to be changed?
<b>Points will be rewarded for helping with this urgent requirement.</b> Thank you.
Regards,
Damien

Hi Kiran,
Thanks for replying. My guess initially was also that the requests are overwritten.
I heard of another company's implementation who did the same concept and was able to do it. Unfortunately, I'm unable to get any information from them.
Initially, my frontend programmer and I thought of adopting the 'dummy checks' methodology. i.e. Do dummy checks when clicking 'New entry' or 'Review' button. This is to ensure that the entries were entered correctly at front end. Only when the user clicks on the 'Send' button, my BAPIs take in a table of request entries and perform the Request_Prepare&Request_Check&Request_Execute one at a time.
This may be expensive as there will be double the processing needed. One set for dummy checks and one set for the actual backend processing.
Is there any way that I can create multiple requests in 'transcient' state so that it won't be overwritten and I can still find it when I call the BAPI PT_ARQ_PREPARE_EXECUTE? PT_ARQ_PREPARE_EXECUTE only takes in request IDs instead of request structures.
Thanks again, Kiran, for replying. Have a good weekend.
Regards,
Damien

How to use Keychain for multiple users on one computer?

I have a new Macbook Pro with Yosemite. I just moved over from PC for my work computer and the Keychain thing is killing me! I am a social media consultant so I manage multiple accounts for multiple clients. I need a way to log in and out as them on many different platforms. The reality is that I am the only user but I log in and out of different things as if this was a public computer with multiple users.
PC allowed me a drop-down option with each login. For example the email box could be clicked and then I could select the client email that I needed to fill in. The password would then auto-populate. Is there any setting I can change to make this happen on a Macbook? I have been logging in, deleting the info in Keychain, then logging in for the next client, delete...etc.
Most password managers don't work because of this same problem. Please don't recommend a password manager app unless it can handle logging in and out of (for example)10 different LinkedIn profiles.
Any advice would be greatly appreciated!

Tanja Turtsanyi wrote:
I have a new Macbook Pro with Yosemite.
Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.
Mac OS X (10.4)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

How do you limit TOC navigation for multiple users on one computer?

If you have 5 Adobe Captivate 5.5. Projects linked together to play consecutively how can you set up a TOC so that each new user starts from the beginning and can only go back to slides that the new user has viewed? We have the TOC set to Enable Navigation, Navigate Visited Slides Only, and View Status Flag. This is a required training video that will be taken by many users. We need them to be able to go back to the sections that they already viewed but not be able to see the sections that others have already watched. In other words, we don't want them to be able to advance ahead to the sections that the previous test takers have viewed.
Message was edited by: DOLOnlineTrainers
Problems:
•     Remove the TOC and they have no navigation abilities to see something they may have missed
•     Keep it in and the viewer can advance to parts they have not viewed as the previous user set the ability
•     Put a back button in and they can only go back one at a time and have no ability to get back to where they were if they keep hitting back other than watch over
•     Tried the clear button in TOC under status flag which clears the status flags yet it only works on one section at a time and does not clear all linked projects
•     Is there something we are missing? Tried reading blogs and really can’t pinpoint problem

To get each user to have a different experience when viewing the content, you need to have some way for each user to be uniquely identified, otherwise the browser has no way of knowing that THIS is not the same person that was looking at the content an hour ago. The way this is normally achieved is by getting users to log in as a different profile.
There's no EASY way I can think of to achieve what you want WITHOUT users having different profiles. You would need to get some custom HTML programming done by someone that basically mimicked separate browser sessions under the same login. It's theoretically possible, but I've never been required to do anything like this.

Directory Structure for multiple applications at one host

Can I have multiple (more than one) WEB-INF directory structures in the public_html directory for different web applications? If I do this, how do setup the url-pattern in the Servlet Mapping tag in the web.xml file? How do I setup the URL that calls the servlet from the HTML that has been send to the user�s browser?

If I understand your question, you want multiple contexts. All App Servers/Web Servers allow you to setup multiple contexts. Normally if your root context is in /home/myhome/app_server/
then you would setup multiple contexts by creating a folder for each context:
/home/myhome/app_server/context1/
/home/myhome/app_server/context2/
Each would have their own full application/website. And the way to reference these would be as such:
if the domain, www.mydomain.com, is mapped to /home/myhome/app_server/
www.mydomain.com/context1/
www.mydomain.com/context2/
I think that is what you were asking. Hope it helps

Easiest Way to Move Media from One External Drive to Another?

My MacBook Pro only has a 500GB hard drive and I currently have all my movies on a 1TB external hard drive. Everything works fine through iTunes, but now since the 1TB is maxed out, I'd like to use my new 2TB external hard drive going forward. I understand that I need to re-route where iTunes finds the movies, but what is the easiest way to make the conversion from the 1TB to the 2TB?
I have copied all movies from the 1TB to the 2TB. Is the only thing left to do is re-route the location to the 2TB? Or do I need to drag and drop all movies into iTunes (they're all already in there)? Just didn't know if I needed to add them into iTunes again so they know to point to the 2TB drive. (sorry if I didn't explain that good!)
Thanks in advance for your help!

Thanks Limnos! Really appreciate the help!
To clarify:
- I currently have only movies on the external 1TB drive (which iTunes points too). The downside is that I ALWAYS have to have my external drive plugged in, in order to play on Apple TV (or view on MacBook). I have appx. over 500GBs of movies on my external 1TB.
- All music (appx. 200GBs) is currently on my internal hard disk, but with a 500GB internal hard drive, that's going to fill up quickly (just so you know - I already have about 125GBs of pics in iPhoto AND work in Photoshop regularly so PSDs lessen my internal 500GB space quickly).
Eventhough I HATE having to keep an external drive plugged into my MacBook, I'm just going to have to suck it up and get used to it so I will have more space and my MacBook will run faster.
With that in mind, I was thinking about moving my music (200GBs) onto my 2TB external drive (along with the movies). So that would leave roughly the photos and Photoshop files (and random other things that are small in size) on my internal drive.
I could start all over and delete all movies that are in iTunes (the application - not the folders) and then drag and drop them into iTunes from the new 2TB, but I wasn't sure all the metadata (really the cover artwork) would be attached when I did that? Going that route really doesn't bother me since I've already copied all movies files from my 1TB to my 2TB. Basically, I would be starting over from scratch as if the old 1TB never existed.
Trying to run this through my mind and come up with the best/easiest way. What I don't want to do is try and find cover artwork for the almost 300 movies I have (and all the cover artwork for the CDs I have too if I decide to keep my music on the 2TB external drive).
Hope that helps and makes sense? Thanks again!

Best Practice for Multiple iTunes and One Account?

My wife and I share our account for our iPhone Applications and Songs in iTunes.
Can someone point me to a topic that covers a best practice for multiple iTunes syncing?
I travel a lot and keep my iPhone synced to my Macbook Pro while she uses the workstation at home to sync to. We keep the addresses and contacts and calendars synced through MobileMe, however, I'm trying to find the best way of pushing applications and songs I've bought over to the other PC so they're still around while I'm traveling for her to sync with.
Thoughts?

Hi Steve,
Might be trying for solution for a long time, If i understood your question clear let me clarify you few points.
You are trying to access the bex query which is designed with the exit's in the background based on the logic and trying to call the entire dimensions and key-figures in a single connection. Then you are trying to map those data in the charts.
Steve, try to make more connections based upon the logic and split them. use the same query but split them by sales per customer group, sales per day, sales per week by making three different connections and try. You can merge the prompts from all connections.
Hope this Helps!!!
Sorry if i misunderstood your question.
--SumanT

Can't get field labels to display above for multiple fields in one cell

I've tried searching for how to fix this to no avail. I'm new to Apex and I'm trying to get 5 fields on one line with labels above each: salutation, first name, middle initial, last name and title. I've set New Line and New Field to No for all but the first item. With the labels for each field set to Right, everything displays on one line. With the labels set to Above, fields are displayed on separate lines and I'm not sure why. There are other fields on the form as well but they are each on their own line. Any help would be greatly appreciated. My Apex version is 4.1.1.00.23. I'm running the standalone Apex Listener (current version from 7/12) with a 10g database.
Thanks

Hi,
have you tried to set New Field to Yes? If that doesn't work, a test case on apex.oracle.com would be great. That's the easiest way to show you how it works.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Easiest way for multiple Themes in one book please.

Similar Messages

Maybe you are looking for