Easiest Way to Backup Main Hard Drive to External USB Hard Drive

I was wondering what the easiest way is to backup my main internal hard drive to an external usb hard drive on a regular basis?
Thanks for the help

Carbon Copy Cloner is NOT "freeware":
http://www.bombich.com/software/ccc.html
The trouble with CCC and a USB drive, is that if you ever have trouble with your iBook's hard drive, you won't be able to boot from a USB drive to copy everything back with Carbon Copy Cloner.
I would recommend booting from the Mac OS X install DVD that came with your computer and opening the Disk Utility from the Utilities menu. There you can make a "restore" from your iBook's hard drive to the USB drive. If necessary, you can do the reverse as well.
-Doug

Similar Messages

  • Rescue and Recovery 4.3 on Win7 doesn't see a backup on external USB hard drive - Model W510

    I've run the Rescue and Recovery utility within Windows 7 on two different external USB hard drives thinking that maybe it was a usb drive issue.  When I open the R And R utility in expert mode I can see that both backups exist on their respective drives.  I planned on updating my hard drive so I made a full hd backup and the R&R startup disc to boot the laptop from.  The bios recognizes either external hard drive at boot with no problems.  It shows the names and "+" sign next to drives.  So I booted the drive at startup off the DVD drive with the R&R startup disc after I was sure that the bios recognized either external drives.  Then when I choose a "Full" restore is of course asks me if I want to use hd, cd/dvd, or external usb drive which I choose the later.  It then should show me the backup that I created earlier just as it did when I ran the utility from the Win7 environment so I can choose it to restore from.  But I get a blank box showing no backups when I run the 4.3 R&R Startup disc.  Again if I boot to Win7 and go into the R&R utility I can see the backup on the exact same USB external drive.  Then boot off the CD startup recovery disc and it shows NO BACKUP!  Help please!  I want to shelf my old hard drive "as is" and create the Restore onto the new hard drive but the utility isn't working for me.
    Thanks for any help.

    Hmmm,
    Seems like that _should_ work.  Here's a way you might be able to finesse it:  go to the advanced R&R menu in Win 7 and create rescue media on your USB drive.  It's essentially the same process as creating the CD - it makes the USB drive bootable and puts a copy of R&R there.
    There _should_ be an option to "preserve existing data" but be prepared to lose your existing backup and make it again.
    Then just boot the external USB drive and see if R&R recognizes a backup image on the same drive from which you booted.
    That's the way I usually migrate to new drives.  Maybe it will get around your mysterious problem.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Can Time Capsule backup an Airport Extreme's attached USB hard drive?

    Can Time Capsule backup an Airport Extreme's attached USB hard drive (without currently being attached to a MAC OSX LION system)?

    No, sorry.. there is no way for the TC to see the files.. and even if you plug the hard disk into the TC there is no mechanism in the TC to drag the files to itself.. The TC is absolutely a dumb network attached drive.. everything you want to do must be done from a computer.

  • 500 GB external USB hard drive USB 2 configuration problems

    Hello Sirs.
    I recently adquired a 500 Gb external USB hard drive part number PX1269E-1G50.
    I have some problems with the USB 2.0 configuration in windows XP. When i connect it to an usb 2.0 port i receive the message "High-speed USB hard disk drive plugged into a non-hi-speed usb hub", and the device stays in low USB (12 mbits/s) speed. (I checked the port with another usb 2.0 peripheral and the port is working in usb 2.0 mode correctly).
    I checked the PXI1269E-1G50 in others pc and i have same results. I cant get it to work in USB 2.0 mode. I also have some problems with the virtual CD partition that is always present when you insert it and mount. Exist a way to remove it ?
    I only use the hard disk for daily data back-up and i don't want to use any more drive letters in my system.
    The main PC is an ASUS P4P800-E deluxe with windows XP SP2 fully updated and build in USB 2.0 intel controller.
    Best regards
    PAMF

    Hello again everybody
    OK. Finally i had to send the disk to my dealer. Toshiba in Spain says there is not solution. Sorry. This is an erratic product. Sometimes with one cofiguration simply works and sometimes with a different configuration does not connect in USB 2.0 mode. I don't want such a product in my desktop... and the Virtual CDrom is impossible to turn off. (I'm not interested in security tools. I only want to make daily backups)
    Thanks to everybody in the forum for your help.
    pamf
    [Edited by: admin on 09-Jan-2007 20:51]

  • Unable to eject external USB hard drive

    I've been using a 500 gb WD Passport external USB hard drive for about six months now, and recently it's had trouble ejecting. I'm not sure if it's the drive itself or my OS; sometimes I can eject it, other times I get the "the disk __ wasn't ejected because one or more programs may be using it.".
    There are NO programs using the drive, and no users connected to the drive from elsewhere. Is there some process in the activity monitor that may be preventing the disk from unmounting?
    I've tried to log out, relaunch the finder, quite all programs, etc - but the only sure fire method is to restart the computer - which leads me to believe there is some underlying system process that is causing the eject sequence to hang...
    Any ideas? Will I potentially harm my disk's contents by force ejecting every time (so long as I'm certain no programs are writing files)?
    Thanks!

    I'm aslo having problems with a USB drive. In this case it's my Time Machine drive. Similar symptom that the only way to eject it is to restart the computer. Otherwise I get the same message. I also tried the Terminal command with the drag/return. What showed was an empty command line:
    +ip-109-43-193-109:~ user$+
    Now, the reason why I've even tried to do this is because I'm having problems backing up withTime Machine. Upon boot up, the first backup always works, but typically any subsequent b/up will fail with the following error code:
    +Starting standard backup+
    +Backing up to: /Volumes/Jimz TM 2/Backups.backupdb+
    +Error: (22) setxattr for key:com.apple.backupd.ModelID path:/Volumes/Jimz TM 2/Backups.backupdb/user's MBP size:13+
    +Error: (-50) Creating directory 2010-07-08-112436.inProgress+
    +Failed to make snapshot container.+
    +Error: (22) setxattr for key:com.apple.backupd.ModelID path:/Volumes/Jimz TM 2/Backups.backupdb/user's MBP size:13+
    +Backup failed with error: 2+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    +Stopping backupd to allow ejection of backup destination disk!+
    Also, this is the first time that I've seen the error lines regarding ejection of the disc.
    Thanks in advance for any thoughts on this.

  • Can a time machine usb drive backup the data from an external usb drive connected to and airport extreme*

    can a time machine usb drive conected to my mac book backup the data from an external usb drive connected to and airport extreme ?

    Hi Adam, if you think yoiur HD may be failing you could do a TM restore onto the new disk. I would rather see you do a clone either SuperDuper or CarbonCopy Cloner.Of your internal drive. That way you have a bootable backup in case it does fail.
    btw - what are the symptoms of your failing drive?
    -mj
    Message was edited by: macjack

  • External USB Hard Drive Can't Be Safely Removed After Boot Camp 3.1 Install

    I just wanted to report that I've done multiple installs of Windows 7 Ultimate 64-bit on my MacBook 4,1 and although I've had no problem using the cmd workaround ( http://www.zath.co.uk/how-to-install-windows-7-on-apple-mac-boot-camp/ ) to install the 64-bit Boot Camp drivers that come with the Mac OS X 10.6 Snow Leopard retail DVD, I have found that by installing the Boot Camp 3.1 drivers on the same system, under no circumstance can I click the the "Safely Remove Hardware" icon in the system tray and not receive a message saying that ... "The device 'Generic Volume' cannot be safely ejected..." and that some program or service must be using it. However, a restart doesn't solve the problem any more than logging out does.
    I read somewhere that part of the fix that Boot Camp 3.1 was intended to provide was to allow safe ejecting of the Macintosh HFS+ partition. Well, my external hard drive has three partitions: one NTFS, another NTFS, and a third HFS+ for Time Machine backups. I suspect, since I haven't seen anyone else reporting this issue, that it may simply be that the Boot Camp 3.1 drivers don't take into account the possibility of an HFS+ partition on external USB devices. Anyway, a System Restore to before Boot Camp 3.1 drivers were installed completely remedies the issue.
    At this point, I'm not having any trackpad issues or anything else of note with respect to the original Boot Camp 3.0 drivers that came with the Snow Leopard retail disc, so I'm fine keeping those drivers installed and allowing Windows Update to update the Intel and Marvell drivers as it recommends. I just find it slightly amusing that the Boot Camp 3.0 drivers, which supposedly did not support Windows 7 (let alone the 64-bit version) work better than the 3.1 drivers which do supposedly support Windows 7. And the funny thing (or is it?) is that you have to install the original Boot Camp drivers with the cmd workaround before you're even able to update to the Boot Camp 3.1 drivers. Hilarious stuff there.
    Proprietary gamesmanship is a big reason some of us prefer the Linux "share the ownership +for free+" model of computing. Just saying...
    Anyone have any proper solutions (as in, other than "don't install the updates then!")?
    bkadoctaj

    I have a pair of external usb drives, one formatted for NTFS and the other for HFS+ connected through an external 7 port hub. I am running Windows 7 (64 bit) with bootcamp 3.1 on a late 2009 Mac BookPro. I share the same "safely remove hardware" issues you described. I always assumed it was because my external drives were connected through my external USB hub because of a similar issue I had running Vista (64 bit), but now I can confirm directly connecting the external USB HFS+ drive also yields the same "safely remove hardware" problem. Unfortunately for me, if I regress to the Bootcamp 3.0 drivers, my audio drivers, at times, fails to load. I would need to regress to Windows Vista (64 bit), the last environment where my iSight camera, internal speakers and all other hardware performed correctly. I would gladly, at this point, live with the "safely remove hardware" issue in exchange for a working iSight camera, the one and only hardware device lost to me in the move to Windows 7.

  • External USB hard drive won't reformat, won't appear in Finder, error: Unable to write to the last block of the device message

    So I just got a new MacBook Air and since I had an external USB hard drive (TOSHIBA MQ01ABD100 1TB) lying around, I decided to use it for back-up. Since I only have just the one hard drive, I decided to partition it into two - one for Time Machine backups, and one for general files (formatted FAT so I could use it with Windows). However, the partitioning failed and I ended up with a partition named disk1s2. Plus, it won't appear on Finder anymore, but it appears in Disk Utility.
    I have tried to reformat it, but I always get the message "Unable to write to the last block of the device".
    Here's the info about my drive:
    Name: TOSHIBA MQ01ABD100 Media
    Type: Disk
    Partition Map Scheme: GUID Partition Table
    Disk Identifier: disk1
    Media Name: TOSHIBA MQ01ABD100 Media
    Media Type: Generic
    Connection Bus: USB
    USB Serial Number: 1220069C
    Device Tree: IODeviceTree:/PCI0@0/XHC@14
    Writable: Yes
    Ejectable: Yes
    Location: External
    Total Capacity: 1 TB
    Disk Number: 1
    Partition Number: 0
    S.M.A.R.T. Status: Not Supported
    And here's for disk1s2:
    Name: disk1s2
    Type: Partition
    Disk Identifier: disk1s2
    Mount Point: Not mounted
    File System: Mac OS Extended
    Connection Bus: USB
    Device Tree: IODeviceTree:/PCI0@0/XHC@14
    Writable: Yes
    Capacity: 999.86 GB
    Owners Enabled: No
    Can Turn Owners Off: Yes
    Can Be Formatted: Yes
    Bootable: Yes
    Supports Journaling: Yes
    Journaled: No
    Disk Number: 1
    Partition Number: 2
    Here's what it says when I run diskutil in Terminal:
    Device Identifier:        disk1
    Device Node:              /dev/disk1
    Part of Whole:            disk1
    Device / Media Name:      TOSHIBA MQ01ABD100 Media
    Volume Name:              Not applicable (no file system)
    Mounted:                  Not applicable (no file system)
    File System:              None
    Content (IOContent):      GUID_partition_scheme
    OS Can Be Installed:      No
    Media Type:               Generic
    Protocol:                 USB
    SMART Status:             Not Supported
    Total Size:               1.0 TB (1000204884480 Bytes) (exactly 1953525165 512-Byte-Units)
    Volume Free Space:        Not applicable (no file system)
    Device Block Size:        512 Bytes
    Read-Only Media:          No
    Read-Only Volume:         Not applicable (no file system)
    Ejectable:                Yes
    Whole:                    Yes
    Internal:                 No
    OS 9 Drivers:             No
    Low Level Format:         Not supported
    I didn't have any data in it prior to the failed partitioning attempt, so there aren't any worries of data recovery. But I'd really like to be able to use this drive again, and save some money (external hard drives are expensive where I live). Anyone with any ideas?

    I'd also like to add that repairing the disk using Disk Utility does nothing but tell me to reformat the drive. So I'm stuck in a loop here.

  • Changing external USB hard drive into a FireWire Drive???

    I have been reading in some of the other discussions about how it is possible to change a USB external hard drive into a FireWire external hard drive. Is this true ??? I recently pruchased an external USB hard drive only to now find out that I cannot use it to boot from. Apparently OSX will only boot from a FireWire drive ??? Is there some way to change my current external USB hard drive into a FireWire compatible drive or do I have to purchase a FireWire drive ??? Thanks.

    All I can remember was an internal USB/firewire hub (for PCs, by the way), I haven't seen external adapters like cables; but you may simply ask in your local computer store about.
    Yes, you can boot only from firewire drives. I was told that it is possible the new Intel Macs are able to boot from USB drives, but haven't had the time to verify this so far.
    A possible solution may be to remove the harddisk from the USB enclosure and put it into a firewire case. This should work and you just need to buy the firewire case without the need for another harddisk. Just ensure that the case is able to take your harddrive (2.5" / 3.5" drives, connection interface).

  • Transfering iTunes files to new computer using external USB hard drive

    Thought this could be useful:
    If you want to transfer your complete iTunes library to a new computer preserving all your playlists and library information, but without using your iPod as a hard dive, or without burning a CD or DVD, you can do it by using an USB external hard drive following these easy steps:
    1) Quit iTunes
    2) Connect your USB external hard drive to your computer and acccess it thru My PC or Windows Explorer.
    3) Create two new folders in your external hard drive (you can name them LIBRARY Backup and PLAYLISTS Backup).
    4) Open the LIBRARY Backup folder.
    5) Open another Windows Explorer or My PC window; open the iTunes Music folder (usually located in C:\Documents and Settings\Owner\My documents\My music\iTunes).
    6) Copy all of its contents (only the contents, not the whole folder) to the LIBRARY Backup folder you created in your external USB Hard Drive.
    7) Close both the LIBRARY Backup folder from your USB external hard drive and the iTunes Music folder.
    8) Open the PLAYLISTS Backup folder from your USB external hard drive
    9) From your iTunes folder, copy the iTunes Music Library.xml to the PLAYLISTS Backup folder.
    10) Close all the windows and extract your USB external hard drive from your PC ()
    11) Install iTunes in your new computer.
    12) Using Windows Explorer open the iTunes Music folder (usually located in C:\Documents and Settings\Owner\My documents\My music\iTunes).
    13) Connect the USB hard drive to your new computer and open it using another Windows Explorer window.
    14) Open the LIBRARY Backup folder and copy all of its contents (only the contents, not the whole folder) to the iTunes Music folder in your new computer. After the copying is complete, close this folder.
    15) Copy the PLAYLISTS Backup folder to you new computer’s desktop.
    16) Close Windows Explorer and extract USB hard drive.
    17) Open iTunes
    18) From the File menu, choose Import. Navigate to the iTunes Music Library.xml file on the Desktop and click Choose. The imported playlist will show only songs located on the computer's hard disk or external media.
    19) You can now delete the xml. file from your new computer’s desktop if you wish.
    PC   Windows XP   Owner of 5th Generation iPod

    Type "move itunes library" into the Google search bar.
    Type "ipod touch not recognized by itunes" into the search bar at the top of this page by "Support"

  • Can a la cie external USB hard drive be bootable on my G5?

    Can a la cie external USB hard drive be bootable on my G5?

    PPC Macs need a Firewire drive to boot from, IntelMacs can boot from USB, but Firewire drives with a one button touch feature won't work either, as examples...
    The following external hard drives are bootable on Intel-based Macintosh computers systems through USB:
    • My Book Essential Edition
    • My Book Essential Edition 2.0
    • My Book Home Edition
    • My Book Mirror Edition
    • My Book Office Edition
    • My Book Premium Edition
    • My Book Premium Edition II
    • My Book Premium ES Edition
    • My Book Pro Edition
    • My Book Pro Edition II
    • My Book Studio Edition
    • My Book Studio Edition II
    • My Passport Studio
    The following external hard drives are bootable on Intel-based Macintosh computers systems through FireWire (1394a/b):
    • My Book Home Edition
    • My Book Mirror Edition
    • My Book Office Edition
    • My Book Premium Edition
    • My Book Premium Edition II
    • My Book Pro Edition
    • My Book Pro Edition II
    • My Book Studio Edition
    • My Book Studio Edition II
    • My Passport Studio
    The following external hard drives are bootable on Power PC based Macintosh computers systems through FireWire (1394a/b):
    • WD My Book Premium Edition
    • WD My Book Pro Edition
    The following external hard drives are not bootable on Power PC based Macintosh computers systems through USB/FireWire 1394(a/b):
    • My Book Essential Edition
    • My Book Essential Edition 2.0
    • My Book Home Edition
    • My Book Mirror Edition
    • My Book Office Edition
    • My Book Premium Edition II
    • My Book Pro Edition II
    • My Book Studio Edition
    • My Book Studio Edition II
    • My Passport Studio
    • My Passport Elite
    • My Passport Essential
    • WD Passport
    • WD Passport (Silver)
    And I'm in no way suggesting a WD cased drive, there drives are good but the cases & chipsets leave much to be desired.

  • C30: Booting from external USB hard drive

    I carry my OS on an external portable USB drive, and then make use of whatever hardware is available where I visit.
    I recently attempted to boot a Lenovo C30 Thinkstation with this external drive, and was unable to do so.  In looking at the BIOS settings, there is no option to boot from USB (other than floppy(?!?) or memory stick).
    Is it possible to boot from an external USB hard drive, and if not, why?
    jerry

    The boot sequence section of our setup menus has been troublesome to say the least (at least through the development phase).  There are various reasons why it is the way it is now....from spec requirements to customer requirements.  So long story short it really needs to be this way, even though situations like the one you encoutered is inconvenient. 
    The USB issue is actually done for security reasons.  For example, many large customers don't want users to have the ability to just walk up and plug in a USB device and allow the system to detect that and attempt to boot to it right away as it is a risk to their image/security.  For this reason, USB devices don't automatically get added to the boot order, and must be added throught he setup menu if needed.

  • Imaging from external DVD player or an external usb hard drive

    Hey,
    At the High School i work at we are running Netware 6.0 SP5 and Zenworks
    4.01 ir6. We have Zen Partitions installed on most computers to store a
    local image in case the the computer needs to be re-imaged.
    However, we have a dilemma. Every now and then a hard drive will go in a
    computer.
    When we replace the hard drive with a new one, we install the Zen
    Partition, do the config and then our last step is to bring down an image.
    Unfortunately our only means of dropping down an image is from the network
    either through normal imaging or through multicast sessions.
    When we drop an image down from the network which takes up network
    bandwidth, it causes slow downs on the users computers and they start
    complaining. Our network is running at 100mb.
    Is there any way possible to image from an external DVD player or an
    external usb hard drive when dropping down an image to a new hard drive in
    the computer? Currently I have all my Zen Images on the external USB
    Maxtor 160gb hard drive and I also have Zen Images burnt to DVD's.
    If so, how do I go about doing this and is there documents on doing this?
    Thanks!!!

    Bpilon,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • External USB Hard Drive causes menu problem - menu items flash

    Greetings:
    I have a external USB hard drive (250 GB) that is partitioned into 3 hard drives. Two hard drives are formatted in MacOS standard and one is formatted in MacOS extended. I had to reformat the last drive in MacOS extended because the Macbook would not let me edit files on the drive.
    The problem is that when I connect to the drives, the menu malfunctions (I cannot see the date and time and the menu items flash). Dismounting the drives solves the problem.
    Do I need to reformat the hard drives? Or do I need a new USB drive?
    Thank you.
    EA

    Hmm, someone else had a similar problem.  Note the ":: Loading root filesystem module...-e" line.  That "-e" shouldn't be there.  It should be, instead, the module for the filesystem.
    As a workaround for right now, you can add your filesystem module to the MODULES array, and remove the "filesystems" hook.
    In that case, you'll probably want rootdelay=* to allow the drive some time to settle, and rootfstype=* to speed up filesystem detection while in kinit.
    By the way, what filesystem do you have on that machine?  Can you tell me what
    /usr/lib/klibc/bin/fstype < /dev/sda1
    outputs on a running system (you may need to be root, or add yourself to the "disk" group or something similar) - /dev/sda1 should be replaced if the usb drive is not sda1

  • How to use iPad (4th gen) to edit with iMovie - but using an external source such as a USB stick or external USB hard drive

    Want to use my iPad (4th gen) to edit a movie using iMovie - easy enough if the movie file is on the iPad - but what if it's too large - can I keep the source file on a USB stick or external USB hard drive and edit from there?  How can you do this?

    You can't export any type of file using the camera connection kit, so a USB flash drive or SD card won't work.
    There are some wireless external hard drives that can be used with the iPad.
    The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
    Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
     Cheers, Tom

Maybe you are looking for