Easiest way to install update rollups for exchnage 2010

Dear Mates,
i have downloaded the update roll ups from RU 1 to RU 7 for my test environment exchange 2010  and i would like install all the update roll ups in all my exchange servers (8 No's). what is the easy method to install all the RU's in single command, or
batch file or from any scripts, instead of double click on each files (RU's)and giving next next next...etc....it should automatically install the RUS
Guide me , if there is any way to achieve this

Hi  rush2ramki
Thank you for your question.
I agree with Andy.
Notice:
you can follow the order to update : Client Access server, Hub Transport server, Mailbox server
If you have multiple Active Directory sites and have deployed a Client Access server in the proxy sites that aren't Internet-facing, apply the update rollup to the Internet-facing Client Access servers before you apply the update rollup to the non-Internet-facing
Client Access servers.
You can refer to the following :
http://technet.microsoft.com/en-us/library/ff637979(v=exchg.141).aspx
If there are any questions, please let me know.
Best Regard,
Jim

Similar Messages

  • Latest Update Rollup for Exchange 2010 SP3

    Hi
    Currently we are using RU2 for Exchange 2010 SP3. We are facing an issue with OWA through IE 11 (no support for premium). To correct this issue it's recommended to install RU3. Here we are asking the expert opinion about installing RU7
    on all Exchange 2010 servers and whether it makes any different issues or is it enough to install RU3
    Thanks in advance
    LMS

    Hi
    Currently we are using RU2 for Exchange 2010 SP3. We are facing an issue with OWA through IE 11 (no support for premium). To correct this issue it's recommended to install RU3. Here we are asking the expert opinion about installing RU7
    on all Exchange 2010 servers and whether it makes any different issues or is it enough to install RU3
    Thanks in advance
    LMS
    Personally, if you are going to update the servers, you should apply the latest RU regardless. So I would go with RU7.
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Installing Update Rollup 4 for R2. Question of post installation task

    I will be installing Update Rollup 4 for Service Manager 2012 R2 on our Orchestrator, Data Warehouse, Service Manager and Portal Server as well as updating the client Consoles.
    Following MS article
    http://support2.microsoft.com/kb/2989601/en-us?sd=rss#install.
    A bit confused about the Post installation tasks. Particularly the following:
    Resynchronize System Center Operations Manager mount point data
    To resynchronize Operations Manager mount point data after you apply this update, follow these steps:
    Disable all the Operations Manager configuration item (CI) connectors in the Service Manager console.
    In Windows PowerShell, check the current execution policy by running the following cmdlet:
    Get-ExecutionPolicy
    If the current execution policy is Restricted, set it to
    Remotesigned by running the following command:
    Set-ExecutionPolicy –force RemoteSigned
    Find the following PowerShell script in your System Center 2012 R2 installation directory:
    OMCIConnector_SyncMetadata_UpdateTimestamp.ps1
    By default, you should find this file in the following location:
    C:\Program Files\Microsoft System Center 2012 R2\Service Manager\PowerShell
    Run the following command from the Primary Management server:
    PowerShell .\OMCIConnector_SyncMetadata_UpdateTimestamp.ps1
    Revert the execution policy to the original value that it had in step 2.
    Enable and synchronize the relevant Operations Manager CI connectors.
    Make sure that all the mount point data is populated in Service Manager.
    I am guessing they are talking about the System Center Configuration Manager Connector but not sure. We don't have a Connector for SCOM. If by OMCIConnector they mean SCOM, then I don't need to worry about this.  If would be nice if they would tell
    you why you are doing this. I don't even know what "Mount Point Data" is.
    Does anyone know if it would cause any problems if I skipped this step? I hate doing stuff when I don't know why I am doing it. For example, step 8 "Make sure that all the mount point data is populated in Service Manager."
    What does that even mean?
    Also, I cannot even find the PowerShell script they are talking about in the C:\Program Files\Microsoft System Center 2012\Service Manager\Powershell folder so are they talking about SCOM or SCCM?

    All of the steps listed refer to the Operations Manager connections. none of these steps relate to the Config Manager connector.  If you are not using SCOM, or don't have a SCOM connector, then you can safely ignore these steps. 

  • VssNullProver stopped after installing Update Rollup 3 for System Center Data Protection Manager 2012 R2

    I recently installed Update Rollup 3 for System Center Data Protection Manager 2012 R2.
    As part of the update I updated all DPM Agents, including the ones on our Hyper-V Servers (which are part of a cluster). I also rebooted every DPM Protected Servers. After reboot all Hyper-V Servers raise a warning that the VssNullProvider service has stopped.
    Backup seems to work properly. I can start the VssNullProvider service manually. But after the next backup the service it is stopped again. Exactly the same issue occurs on our test Hyper-V Cluster. All our Hyper-V Servers run Windows Server 2012 R2 and
    we use System Center Virtual Machine Manager 2012 R2.
    Something is not ok with Update Rollup 3. Any suggestions?
    Boudewijn Plomp, BPMi Infrastructure & Security
    Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".

    Hi
    SEE NEW BLOG:
    Support Tip Service Manager alert for the VSSNullProvider service after installing
    DPM 2012 R2 UR3
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.
    Thanks!
    Boudewijn Plomp, BPMi Infrastructure & Security | Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".

  • Installing Update Rollup 7 for Exchange Server 2010 SP3

    Hi,
    I have 4 Exchange servers. Two CAS and two DAG. I am currently on Rollup 2 for Exchange Server 3010 SP 3. Can I install Update Rollup 7 for Exchange Server 2010 SP3 or do I need to install a previous one first?
    Thannks!
    Wave~Chaser

    Hi,
    When I try to install Exchange 2010 SP3 roll up 7, am getting the below error:
    The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may
    be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
    and please find below event log:
    Product: Microsoft Exchange Server - Update '{A93DA06F-A5B8-4DF8-8B3F-B285E014C659}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions
    on turning on logging support.
    Can you please help me with this error.
    Thanks

  • Error Code 8024200D while installing update KB3000850 for Windows 8.1

    Error Code 8024200D while installing update KB3000850 for Windows 8.1
    I have been prompted for the last 10 days to install the important update KB3000850 in my laptop, but the installation fails every time.
    Two days ago, on March the 12<sup>th</sup>, I installed 31 updates without any problem. What is wrong with this particular update?
    You will find below my dialogue with Microsoft Support Engineer, Mr Niranjan Manjhi, who referred me to you:
    Hi Michelle,
    Thank you for posting your query in Microsoft Community.
    I understand that you are unable to install the a specific update KB3000850. I will be happy to assist you with your query. Let me ask you;
    Is your computer connected to domain?
    Which security software is installed in the      computer?
    Do you remember making any specific change in the      computer prior to the issue?
    This November update rollup also includes all previous updates since the previous image update in April 2014 and this includes performance and reliability
    improvements.
    Cause:
    This issue occurs because a process keeps a file in the component store open. Therefore, the file cannot be deleted or overwritten. Let's try the methods below and
    check the status.
    Method 1: Depending on the architecture of your
    Windows 8.1 operating system, I would suggest you to install the following package first and then try installing the KB3000850.
    All supported x86-based versions of Windows 8.1: [link] Download the package now.
    All supported x64-based versions of Windows 8.1:
    [link] Download the package now. 
    Restart is required.
    Method 2:
    If the issue still persists, run the Windows Update Troubleshooter and check the status.
    Click to run
    [link] Windows Update Troubleshooter
    Also refer to:
    [link] Troubleshoot problems with installing updates
    Hope this information is helpful. Please feel free to reply in case you face any other issues with Windows in future.
    Regards,
    Niranjan Manjhi
    Dear Niranjan,
    Thank you for your answer.
    To answer your questions:
    1) Yes, my laptop is connected to the domain,
    2) My security software is McAfee Total Protection, the same I use for my PC running Windows 7 XP,
    3) I did not make any specific change to the laptop. It is true though that I run regularly McAfee´s QuickClean.
    In your answer, you suggested 2 methods for resolving the problem.
    I chose to apply first the second one, i.e. I ran once again the Windows Update Troubleshooter, which revealed again the following status:
    Potential Windows Update Database error detected Ox800F08F: Not fixed
    Windows Update components must be repaired: Fixed
    And a last information: Yesterday, McAfee´s Vulnerability Scanner was automatically activated, showing as "critical" the update in question ("important" according to Windows)!
    As for applying the first method you suggested, I will need the services of a professional, someone more IT literate than myself.
    Michelle
    Hi Michelle,
    Thank you for keeping us updated on the issue.
    Since the computer is connected to domain, I would request you to post your query in the TechNet forums as your question is beyond the scope of what
    is typically answered in this consumer forum and would be better suited for the IT Pro audience on TechNet.
    Please post your question in the link TechNet Forums.
    Regards,
    Niranjan Manjhi

    Hi there @Achintya-only
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
    Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
    Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
    What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
    Please let me know what you find.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Help!  oracle report out of order after update Rollup for windows 2000 sp4

    hello once again
    i haven't received any solution of my problem, so i am again uploading it.
    ----PROBLEM IS GIVEN BELOW-----
    i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformatted fashion. in order to print the report correctly i have to remove the patch from the windows.i have set all parameters and
    defining page size in files like wide180.PRT in printers folder in oracle directory.
    Is there anyway to print the report without uninstalling windows patch?
    thanks

    I don't have any idea about this issue. Maybe someone else on this forum can help. Meanwhile, there are couple of places you can search for this issue:
    Search google for printing issues with this patch
    Search Microsoft forums for Windows 2000
    And if you have metalink account, search metalink forum, document/note or open a SR for this.

  • October 2014 update rollup for Windows Server 2012 R2 and Data Protection Manager 2012 R2

    Hello all,
    After installing the October 2014 update rollup for Windows Server 2012 R2 (KB2995388) on our Windows 2012 R2 Core Edition backup jobs of System State start to Fail, below the generic error:
    The replica of Non VSS Datasource Writer on hostname.domain is inconsistent with the protected data source. All protection activities for this data source will fail until the replica is synchronized with consistency check.
    The job was cancelled. The user either cancelled the job or modified the associated protection group.
    Removing the update rollup all jobs complete without errors. Somebody is expiriencing the same issue? How can we resolve the problem?
    Thnks, Andrea

    Hi Andrea,
    Have you installed the update 2919355?
    To apply update 2995388, you must first install update 2919355 on Windows 8.1 or Windows Server 2012 R2.
    According to the official website, the issue which you described is not listed as the known issue.
    Please uninstall this update and continue to monitor the official website for the latest news.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Error Install Update Rollup 3 Exchange Server 2010 SP2

    Hy Guys,
    I have the follow troubble when i try install the Update Rollup 3 Exchange 2010 SP2 on CAS Server. The error is "The user who's currently logged on doesn't have sufficient permissions to install this package. You need at least Exchange Server Administrator
    permissions on the current computer to complete the task."
    I've checked the permissions of the user which run the installer and those permissiones are OK. The user belong to Domain Admin, Enterprise Admin, Exchange Organization Management groups.
    I don't know what else to do. Thanks for your great help.

    Hi Wilmar
    Do you have PowerShell execution policy via Group Policy that could be blocking the install? If you right click the file and select "Run as Administrator"?
    Can you try running the setup from an elevated command prompt?
    Or you can enable logging by executing the patch like this below:
    Rollup3.msp /lxv* c:\Rollup3.log
    You can also look here:
    http://technet.microsoft.com/en-us/library/ff772434(EXCHG.80).aspx
    http://exchangeshare.wordpress.com/2009/05/30/exchange-update-rollup-installation-it-is-not-nightmare/

  • Oracle report out of order after update Rollup for windows 2000 sp4

    hi
    i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformated fashion. in order to print the report correctly i have to remove the patch from the windows. Is there anyway to print the report without uninstalling windows patch?
    thanks

    Hi
    first of all thanks for replying .if you mean defining page size in files like wide180.PRT in printers folder in oracle directory, off course i have set parameters. thing is that printing works fine without windows patch but it gets deteriorated after installing the patch.
    Thanks

  • Is there any way to disable update check for a specific add-on?

    There are a few add-ons I have problems with their latest versions. So i don't want to update them. But everytime there are any updates for other add-ons they also appear and need to be unchecked. Is there any way to disable update just for them permanently?

    Yes, but it is not straightforward. For details see [http://kb.mozillazine.org/Updating_add-ons Updating add-ons - MozillaZine Knowledge Base]

  • How install update rollup patch on Bulk agents?

    Hi Experts,
    I need to update UR5 on 8000+ agents.  Do we have powershell cmdlet to install Update Rollup on Bulk agents?
    Please suggest method to install UR5 patch bulk no. of agents.
    Expecting your reply!!
    Thanks in advance!
    Regards
    Karthick

    For deploy agent using script, you can refer below link
    http://www.systemcentercentral.com/opsmgr-2012-installing-opsmgr-2012-agents-from-the-command-line-sample-script/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Easiest way to install InTune on remote PCs.

    Hi Everybody, 
    We have about fifteen people who are on the road, and I want to install InTune on their PCs.. All of these are new machines with Windows 8. For security reasons there is no remote access software installed on these PCs.... What is the quickest and easiest
    way for me to install InTune on the fifteen PCs. 
    regards, 
    Jonathan.

    Magic. Honestly. There is no easy way.
    If the users have local admin permissions (in which case your should reload their systems because they are probably already owned by the Russian mob) then you could simply send them the link to install the agent or the entire exe and necessary cert.
    You could use meeting software like GoToMeeting to temporarily take control of those remote PCs.
    Ultimately though, it requires physical access, connectivity, and admin permissions. There's no magic way to provide these.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • [solved] Preferred way to install & update Gnome extensions

    Hello there,
    What is the preferred way to install and update Gnome extensions?
    Do you
    a) install the respective extensions from the AUR
    b) or do you use the https://extensions.gnome.org/local/ page for that purpose?
    What are the advantages and disadvantages of both ways?
    Thanks!
    Last edited by orschiro (2013-06-13 10:10:48)

    Unia wrote:
    Thaodan wrote:Why add an extra interface if your package manager already does the job?
    Because if you use the AUR, you depend on the respective maintainers to update their PKGBUILD when a newer version is out. If they don't update, you will not receive a notification that a newer version of your extension is available.
    With extensions.gnome.org/local, you do not depend on anyone else. It has no harm to your system to manage extensions like this; they get installed for just your user (in $HOME/.local/share/gnome-shell/extensions).
    I know which method I prefer.
    Hmm true, despite the bad effects of using the AUR prefer to use it cause I don't like to add extra interfaces for every app. But I think that is just an opinion...

  • What is the easiest way to convert .MTS files for use in Final Cut Express

    I initially downloaded my Sony Alpha7 files into iMovie. As the production requires a little more professional software I then tried to import files into Final Cut Express. As these are now .MTS files what is the easiest way of converting them?

    Hey Martin et al,
    Related question...
    After you convert files from M2TS or MP4 into something usable in FCE can you trash the original M2ts/mp4 files ?
    I recently used Mpeg Streamclip to convert Mp4 into AIC for FCE for example..
    Is there a general rule of when you have to save original files so everything works in FCE?
    I'm running out of HD space.
    Thanks a lot,
    Al

Maybe you are looking for