Easiest way to replace a face in a picture?

In Elements 10?

Use Photoshop Elements 7 or later.
Open both the images :
1) with face to replaced
2) with face to be replaced with
Now go to File > New > PhotoshoMerge Faces
Drag the image, in which you want to replace the face to the right Bin(Final)
Click on the sourse Face image( from Project Bin) to open it on the Left Bin(Source)
Make small strokes on the face and see it getting copied on the image in the right.
In case the alignment of facaes is not automatically correct, use alignment tool button to drag and place the three Anchor points on both the right and Left images to mark them as corresponding points.

Similar Messages

Easiest Way to Replace a Phone?

I have a 7961 with an expansion module where the screen died on a UC500 system.
I have a replacement phone that I have attached the expansion module and plugged in but of course it needs the configuration assigned to the mac address of the old phone. What is the easiest way to do this?
Can I do it in CCA 3.1? I am guessing not as I configured the first phone using the CLI.
Thanks,

I do this quite a bit....
1. Unplug the old phone.
2. conf t
3. ephone <#>
4. reset
5. mac-address
6. ephone-template <#>
7. Plug in new phone
Sometimes you may have to "reset" multiple times for the "mac-address" command to go through. Do NOT plug in the new phone until after this is completed.

Best way/easiest way to Watermark using Aperture 3

I was just curious the easiest way to add a watermark to my pictures in Aperutre 3. I've used Pixelmator in the past , and was happy with it, but can't download the trial again. I was just curious if anyone knew an easy way to create the watermark (like on what program) and then transfer it on to my Aperture pictures. Any thoughts? Thank you

This has been discussed here in the past so searching for 'watermark' in the forum will turn up some useful info.
Briefly to create a watermark file you need to be able to produce either a psd file or a tiff with a program that supports transparency. Again a search of the web will turn up many suggestions. Some possibilities are Photoshop (expensive), Gimp (free) and I've even done it using Keynote which is part of iWorks.
Hope this helps.

Whats the easiest way to transfer pics from my SD car to my mac

I am upgrading from an LG Revolution droid to an iPhone shortly and would like to know if anybody knows what the quickest easiest way would be to transfer all the pictures on my SD card onto my apple computer. I would love it if they could go directly into iphoto but am not sure if thats an option. Any help would be greatly appreciated

Just plug it in using the USB cord, find the phone storage on your computer (it will show up as a removable drive), then drag and drop.

Easiest way to find & replace fonts?

I need to replace a font in my document w/Arial, and I don't know the easiest way to go about it.
For some reason I assumed there was a simple "Find & Replace" method, like in InDesign or Quark, but I can't seem to find it.
I've tried the "Find/Change" > "Character Format" tool, but it doesn't seem to work...Any suggestions?

Use the Paragraph Designer to make the change at the tag level by specifying Arial instead of whatever is in use.
If you have a number of tags, you can select them all in the document and then use a global command in the Para Designer to apply the new font to all selected tags.
If you have a book, once you've got a chapter set up, import the updated formats too all chapters by selecting them in the book file and Importing Formats to them with the edited chapter as your source.
Art

Easiest way to move games and apps from old ipad (cracked screen) to replacement ipad?

What is the easiest way to move games from old ipad (cracked screen) to new (replacement) ipad?

When you plug the new one into iTunes to set it up, you'll be asked if you want to set it up as a new iPad or restore from the backup of the old one. make that choice and you should be good to go. You'll need to input passwords and set the internet back up and such, but most of it will be there.

Just replaced my nano with the new itouch. Easiest way to re-sync?

Guys-
I'd like to be able to switch from my Nano to my ipod and simply import all my songs (Apple purchased and cd's and podcasts) from my Nano into my new itouch. What's the easiest way to do this?
Alternatively, can I still keep the same music on both my Nano and my itouch? I mean, I purchased both devices and I purchased my music and it's still on my same pc, right?
Thanks in advance for your help.

Hello,
You can certainly sync multiple devices to one iTunes library. iTunes should be able to tell the difference between devices, to maintain differences in name, syncing preferences, etc. When you connect the touch, it should behave similarly to the nano, in that you can have iTunes sync everything in the iTunes library to it for you.
CG
Message was edited by: CasperGemini

Is there a montage package in adobe. What is the easiest way to do montages?

I would like to do professional montages the easiest way. Is there a package in adobe that I can use with my photoshop. I use to do them on old photoshop 5, was able to have my photos and format on the same page and just move them. But its not working on cs6.
What would be the easiest way? Bridge? Photoshop? Elements?

Elements has some sort of collage facility. I created a Photoshop Photo Collage Toolkit I find easy to use but then I programmed it.
Photo Collage Toolkit UPDATED April 30, 2013 Added border option to PasteImageRoll.
Photoshop scripting is powerful and I believe this package demonstrates this.
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
There are eleven scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
Documentation and Examples

What is the best and easiest way to speed up a Mac-MINI?

What is the best and easiest way to speed up a Mac Mini without adding memory?

I'd tried to reply yesterday to your question but for some reason it didn't go anywhere and I got a red message box in the Discussion post area with "error." After trying three times, including log-out, clear cookies from browser (and history) and back in, I still was unable to add my post with links to resources for your Mini, here. And the last time I tried that, the copied text also went missing as I found it gone after considering to make a Text document of it, for later posting.
Anyway, the http://iFixit.com site has guides on how to replace RAM in the computer you have. Note there are different models shown and from what I remember, yours is the last 'old look' Mini with an optical drive. The model after that is thin, a 2010 model with slot in front for discs; the next one has no internal optical drive.
RAM specs: 2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM (replace pair) up to 8GB total. Best price would be an online vendor of repute, once you know about what they sell for, you could ask a local mac expert if they could get you a better than retail price. I get ram from OEMPCworld and shipping is about $1. including insurance to my post office box, priority or 1st class. At about half retail. Crucial (website) offers parts, too; and so does OWC (other world computing).
In addition, I recommended checking into the build specs and quality of the OWC (esales) site for external enclosures with their own power supply, for hard disk drive; for storage and bootable clones on different partitions. And see about Bombiche Carbon copy cloner, it is a commercial product now, not donationware. I've used it successfully to make competely bootable clones on a suitable external HDD (drive should have own power supply, too) A 750GB HDD in a self-powered enclosure that can boot Mac OS X from a clone, is a good start on backing up your upgraded OSX in a way you can clone it back into an empty, wiped or new HDD inside the computer; and it can run from the external. You can't necessarily use a TimeMachine that way.
This should be your Mini -- check other indicators to be sure:
http://www.ifixit.com/Device/Mac_Mini_Model_A1283
A serial number lookup site such as the one I end up using because I had it bookmarked is OK: http://www.powerbookmedic.com/identify-mac-serial.php & also have mactracker http://mactracker.ca
Anyway, before I time out or exceed post content(?) This is not all I meant to write before.
Good luck & happy computing!

What's the easiest way to back up and restore my hard drive to a new HD

I'm going to upgrade my hard drive to a larger one on my MacBook. I have an external backup drive. What is the easiest way to save all my data (documents, emails, etc) and applications and restore them to the new hard drive in my MacBook? I have Leopard OS.
I've read on the forum everything from using Time Machine to the Disk Utility. I have been backing up everything to my external HD using Time Machine.
Can you point me to a step by step process.

I don't use TM, so here's my method that I've used many times for the same thing you are doing.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Now, boot from the clone to be sure it works correctly by opening Startup Disk, selecting the external volume, then clicking the Restart button. If all is well the computer will boot from the external drive. Now shut down the computer and disconnect the external drive. Disconnect the AC adapter and remove the battery. Install the new hard drive. Once you've completed the installation connect the external drive and restart the computer.
Now do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Steps 4-6 are optional but recommended for a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
After formatting is completed use DU to clone the external drive's system back to the new internal drive. The external drive becomes the Source and the internal drive will be the Destination.

TS1463 What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not w

What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not working, please help me...

If you are unable to get the iPod into Disk Mode to try and restore it, it's a very good indication, as mentioned in the article, that the iPod's hard drive is damaged and in need of replacement either by Apple or a third party repair company.
B-rock

Fonts - What's the easiest way to do this?

Hi All,
I'm in a situation at the moment where I would like to put the JDK 1.4 fonts into a JDK 1.3 program..
What's the easiest way to do this?

Hi,
perhaps you can get no answer, because it is not clearly said, what you want to do?- From which JDK 1.4 Fonts are you talking of?- What is meant by this?- The Font class or what else?- Do you want to replace one or more .class files of JDK 1.3 by one of JDK 1.4?
In general you are not allowed to replace parts of the packages or subpackages of "java", "javax" or "sun" or add or remove classes to resp. from them - you accepted this terms when you had downloaded the JDK - sure, it is possible, but you are not allowed to do so - it is illegal.
greetings Marsian

Easiest way to transfer iTunes library on an external drive to a new Mac?

Hello,
I currently have my entire iTunes Library (Music, Movies, TV Shows, etc.) on an external hard drive.
I have a new Mac arriving tomorrow, to replace my current one. What is the easiest way to get my entire Library into iTunes on my new Mac?
I know Migration Assistant is normally supposed to help with this, but I assume that's only if the Library has been stored internally. Can I simply plug the external drive into the new Mac, authorize the computer, and Import my entire Library from the File menu?
Any pointers would be appreciated. Thanks!

mattfromallston wrote:
I have a new Mac arriving tomorrow, to replace my current one. What is the easiest way to get my entire Library into iTunes on my new Mac?
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.
Also... Have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html
NOTE:
It is important that the External Hard Drive is formatted as Mac OS Extended (journaled).

WHAT IS THE BEST NAD EASIER WAY TO REPLACE THE SKY IN A LANDSCAPE FOR A DIFFERENT ONE?

WHAT IS THE BEST AND EASIER WAY TO REPLACE A SKY IN A LANDSCAPE FOR A DIFFERENT ONE?

depends who clunk you can get away with.
easiest is magic wand and use the layer properties to make it 'multiply' or 'lighten' or 'darken' etc as suits your images.
a step on from this would be to use the layer blending options. it's the easiest way to get a good overlay,
paste the new sky image into your image and scale it to fill the whole area, then double click the layer
then use the blending options especially noting the 'blend if' sliders at the bottom which you can use to tell it to allow different tones to show through.
this mixed with holding the l'alt' key as you adjust the sliders allows you to fade from 0-100% of certain tones being visible through the layers, so you can for example allow you new sky layer to be seen in between branches of a tree etc. fiddle with it and you'll see what it does.
combine this with a layer mask where you can paint out bits that you definitely don't want the sky to show through.

Web - What is easiest way to implement User Security and User Profiles

Hi, I am new to these forums and kind of new to Java. Sorry if this is in the wrong forum!
Bit of background to my experience with java
I have been playing about with java for a number of years and have created a few basic programs such as a screen shot tool that allows you to capture to default locations and look at previews first etc. I am now venturing into web related stuff. I work in IT doing systems testing and have done bits of basic development on various things.
What I've done so far
I am using Netbeans IDE 6.7 and MySQL 5.0
I am trying to learn more complex java and have decided to try build a basic web / database system that basically implements adding / amending / deleting data from a MySQL database through web pages. I am now trying to implement basic user access and profiles. I have so far got the following:
- MySQL table with user info - username / password
- JSP page with usual login stuff
- Servlet that validates the username and password - if correct forwards to main menu page.
Its as simple as that - there is nothing stopping you just typing in the URL of the main menu page and going from there.
What I want
I am wanting to eventually get the following:
- User authentication so that you have to logon before you can access anything else
- User profiles that determine what each user can or can't do, restricting the pages / services / options available (i.e. normal user can't delete etc)
- Would it need some sort of session manager to allow multiple users etc?
I appreciate this is a fairly open question but what is the easiest way to start implementing this? Not after specific code as I would prefer to try figger things out myself, but a point in the right direction would be great. It doesn't have to be extremely secure as this is just for me at the minute.
I have spent all day looking at things like session data / url rewriting / security settings in web.xml / bespoke servlets and am now in java overload!

Hi everyone,
I've now actually gone back to the tutorial that I linked to above and implemented that using form login and j_security_check.
Agree with Saish, and although I don't know enough about the other options to give a good reason, using realms and j_security_check just seems to be a bit cluncky and messy. I would also prefer something a bit more generic, that doesn't rely on setting users in glassfish, hence why I started with my own user table.
Anyway, I will leave it as is for now and maybe come back and try one of the other options.
The only problem I can see now is that to add users i will need to go through all the steps of adding users in glassfish and web.xml... Is there a way to do this through a servlet or something so I can have a jsp page to add users that also creats all the other bits for it to work?
Thanks everyone for your help

Easiest way to replace a face in a picture?

Similar Messages

Maybe you are looking for