'Easing' in Premiere CS5

I'm wondering if there is a way to use 'easing' (like in Flash CS5) when I'm moving and/or zooming into or out of an object.
I've got a jpeg that I imported and put on a layer in Premiere CS5 and I start them zoomed way in and am zooming out over about 10 seconds. It seems to start to zoom out very slowly, but as it goes more zoomed out, it appears to speed up. I understand why this happening logically, but can't seem to figure out a way to stop it from happening. I'd like it to zoom out at the same pace no matter how small the image gets. In Flash, I would use easing or something like that. Since it's a still image, not footage, I can't use time re-mapping.
I'm hoping the solution is easy and is staring me in the face...
Thanks for any help!

This explanes exactly how keyframing and keyframe interpolation is done.
http://help.adobe.com/en_US/premierepro/cs/using/WS2A48F48C-8A53-4ef4-988A-58A122C2FCC2a.h tml

Similar Messages

Long load times normal for Adobe Media Encoder from Premiere CS5?

When I export a sequence from Adobe Premiere CS5 using Adobe Media Encoder, the system freezes for several minutes before giving me the exporter screen. Then, when I've loaded my settings and clicked "export," the system again freezes for several minutes before beginning to encode. I'm using a system with an Intel I7 CPU 930 @ 2.80Ghz 2.80 Ghz., 24 GB of ram, Windows 7 Ultimate 64 bit operating system and an Nvidia quadro FX4800 graphics card.. Everything else is fast, but AME is slow. Is this normal? Should I reinstall AME?

Not sure what you mean about the process. From Premiere CS5, I click on "export" which brings up a menu. I select "media" from the menu which brings up the Adobe Media Encoder. I adjust my settings and click "export" from the bottom of the screen to immediately render the Premiere file. Clicking "Queue" would put the program into the AME Queue. Am I missing something? On the slowness issue, looks like I need to reinstall AME. I've been reluctant to do that, partially because I'm using some Matrox hardware and I'll have to reinstall the Matrox softare to populate the matrox settings into the media encoder. Looks like it may be worth it.
Thanks.

Screen goes black for 3 seconds in premiere CS5 every time I click

This is the first time I run Premiere CS5... On a fresh system install.
I suspect it's not playing well with my video card, a Radeon HD 4870 with 1GB Ram... Very standard stuff. I am running window 7 64 bit with 12 gb RAM, a week old build. I have all the updates and latest drivers, sigh. After Effects CS5 runs fine, Maya 2010 runs fine, Quicktime runs fine... What gives.
Here's what happens: I only need to launch Premiere, right away I get the problem. The screen goes black 3 seconds before the prompt to create a new project. Once I create the project, the application workspace comes in, but if I click any menu, drag a tool window (whatever they are called), the screen goes black 3 seconds then comes back. Its basically impossible to work...Huge drag.
Update:
The problem stopped after I went into the 'device settings' in preferences and set the device to 'none'....When I clicked on the device settings panel, my monitor went black, and there was a 'no signal' warning that came up, as if the DVI-D signal was dead. I was able to restore the signal by hitting ctrl-alt-del which switched me out of Premiere onto the desktop. Clearly, there is some issue with video. I switched back into Premiere and was able then to set to no devices.
I'm not doing any capture at the moment, but I can only pray that it's some sort of bug related to not having a device connected? I plan on bringing footage from a RED in the next month. I upgraded to CS5 specifically so that I could use more than 4 gigs of RAM and for the new features.

THank you for sending this.
I followed the benchmark directions, and I get an error at the final step
when I run the script:
line 99
Error: path not found
I tried for an hour different things, namely to re run the whole test
procedure, deleting the output files, etc... he script is looking for
something in the preview files that it is not finding. I think the procedure
was written for a previous version, because the metadata settings are
different in my version of AME, and I don't know how much that affects it.
Also, AME increments the file names when it renders them so that I did not
get the right output file names at the first render. I had to turn off
incrementing and manually name each clip before rendering. The vb scricpt
looks for these names, so I understand it is important. I can't figure out,
however, what the script is looking for in the preview folder and not
finding.
After spending almost two hours trying to troubleshoot the script, I gave
up. I can tell you tho that it takes about 6-7 minutes on my box to encode
all the videos.

Tiffen Dfx for Premiere CS5 or above?

does anyone know if Tiffen have plug in for Premiere?
i found something but not sure if it will work with Premierea CS5?
any advice pls

Hey dude,
i did exactly what you wrote to me but yet nothing, and most probably i am doing something wrong!?
So, i have Premiere Pro CS5 and during the installation i installed it, in the PPRO plugins en_us folderand when i open premierre and go to the effects i don't see tiffen dfx options (effects)?
i do not know if i am missing something but would you tell me step by step how you do that on your PC?
thanks a lot

CS5 - When Capable for nanoFlash Sound with Premiere CS5

Well Folks, here we go again. I made the mistake of ordering and paying
for and going through the grief of installing CS5 - I should have my head
examined (as my Dad used to say to me frequently!), after 13 years of
purchasing the latest Adobe updates. But excuse me, to the subject:
I have an EX1 with nanoFlash producing stunning pictures at 1920x1080 30p
100 Mbps Long GOP MXF Files, and Premiere CS5 handles the video beautifully,
but the audio right out of the box for me and all the other nano people is
gutter garbage, with stereo, one audio channel lagging the other (which can
only be laboriously fixed with each individual clip - argggghhh)!
And Adobe, in its infinite marketing hype and wisdom has decided that users
such as I are not important enough to fix this issue, even with the update!
Does anyone at Adobe or out there anyplace have any notion as to when this
will be FIXED?
In the meantime, after a total rewrite of my hard drive OS and all the other
apps for a clean install, I am back to CS4, using Premiere CS4 with the Main
Concept plug in enabling the appropriate handling of my nano files. But good
greif! The time it takes to get out of the timeline, and particularly so compared
to the otherwise superb performance of Premeire CS5.
Convergent Designs - the company which developed and makes the nanoFlash
and related products announces that Adobe has two nanos in hand!
I know, I know, I should have my head examined. But if anyone out there has
any comments avoiding that, I's appreciate the latest info or even gossip!!!!

AndyUrtu:
In response to your query above re output on my nano, with which I am having difficulty in PPCS5:
Video: 1920x1080, pixel depth 32, frame rate 29.97, pixel aspect ratio 1.0,
MPEG 2 - 4:2:2 - progressive - CBR 100,000 Mbit/sec - Long GOP N 15 M 3
Audio: PCM AES-3 - 48,000 Hz 24 Bit - 2 Channel
Soooo, I think that pretty well covers it! Now for some commentary, and to me, the
interesting query about trying other settings! Frankly, I hadn't even thought of that.
First, according to all the users I admire and respect, and according to the principals
of CG (Convergent Designs), the 100 Mbits/sec settings seem best and ideal in
terms of securing the best picture quality at the "lowest" data rate (if you can call
that a "low" data rate!). So I'm really not willing to change the video set up. But
I find the idea of doing something different with the audio interesting, and may
try some different settings, since my (and others') issue is with the audio.
From the outset, the principals at CG reported that there were problems with the
audio in nano files with PPCS5, and they implied that Adobe would likely provide
a fix. So I went ahead and purchased the nano and the Production Pemium Suite CS5
with the expectation that a solution would shortly be forthcoming.
You and I are not alone in experiencing this problem, notwithstanding comments to the
contrary!
And I took Harm's (another one of my Heros!) to heart, and just posted my issue
Adobe's Bug site.
I may be mistaken, but I believe that CG has just produced the thousandth nano,
and while this is miniscule compared to other devices providing files for Adobe,
for those of us who own a nano, the issue is monumental - personally and professionally,
the combo of the Ex1 and the nano produces such stunning fidelity for anything
under 20 or 30 thousand, that I am not willing to settle for anything less.
I hope that the Adobe person will supply some hard data here about the nano
settings which provide error free handling of nano files! It would be MUCH
appreciated.
Respectfully submitted,
William Urschel
Bee Cave Digital Video, Inc.
Austin, Texas

PC Recognizes HV20 but no frames are captured in Premiere CS5? (Or HDVSplit)

Hi there.
Recently upgraded my laptop to a nice Sager NP8130 as a mobile editing workstation, and when I went to begin capturing HDV footage the other day, I wasn't able to!
My PC detects the camera (Canon HV20) fine, it shows up in device manager as functioning. In Adobe Premiere CS5, and HDVSplit I can use the playback controls to shuttle the tape around, and I even get timecode feedback correctly on the PC.
But no matter what, I can't get any dang video to capture!
Camera and cable are definitely working fine; I dug out my old laptop and captured the footage I needed with no problem.
If anyone has any ideas, or any experience with this error, I would dearly appreciate any input,
Thanks!

Unfortunately, with no success, I also tried that method of switching to the Legacy firewire driver, as it used to be a common suggestion back in the vista days.

Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5

PROBLEM: Premiere CS5 - Project Monitor playback is jerky
This had NOT been an issue prior to reinstalling the operating system and all software. I have read numerous articles on the forums and have tried everything I can find...with no results.
STEPS TAKEN TO RESOLVE THE PROBLEM:
I have scoured the articles here http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=choppy%20video&cat=support&pr oduct=premierepro and others at Cretive Cow
I have installed all updates for CS5 Master Collection, immediately following a fresh install of the operating system and SC5 Master Collection.
I have ensured that sequence settings match resolution and frame rates of footage - the problem persists.
I have tested by importing both standard def AVI files created from tape and high def SONY MP4 files - the problem persists.
I have ensured the latest Video drivers are installed (clean installation selected, so that the Windows default would be removed) - the problem persists.
I have tried the 3D settings in NVIDIA control panel | Program Settings tab... selected Adobe Premiere Pro from the drop down menu | and chaged 'Multi-display/mixed-GPU acceleration from the value of 'Multiple Display performance' to the value of 'single display performance'; although, I ran two monitors before using this latest NVIDIA video driver and I didn't experience this jerky footage issue - the problem persisted after affecting that change; so, I switched it back.
Since I have 96 GB of RAM, I don't use a pagefile. A zero MB page file is the same setting I had prior to rebuilding the C: Regardless of whether I have a pagefile or not, the problem persists.
I have tried creating a fresh user profile, where the user profile is created on the C: drive by default; and, where I left it there on C: to test for the jerky playback in a new PrPR project - the problem persists.
Regarding the C: (system drive) and why I reinstalled everything, it had become unstable and was locking up. I ran DISK ERROR CHECKING with the FIX parameter and the system was still locking up on me. Keep in mind that the System drive is a solid state drive. Anyhow, I had no choice but to dive in and reinstall everything. I wiped the system partition of the SSD using quick format and started installing the operating system. Now, I've read the CLAIM that this cuases performance issues; but, the only place I see issues is in the video monitor playback in PrPr. Everything else - Office applications...printing...browsing the Internet...works just fine, everything is responsive, whereas, I couldn't do ANYTHING with it before.
SYSTEM CONFIGURATION:
The Operating system and all software is installed on C:
All data files and most profile related folders are stored on D:
C:\ (one Intel Solid State Drive - SYSTEM DRIVE) Used Space: 57.5 GB Free Space: 388 GB
D:\ (four Western Digital 2TB drives in an on-board INTEL hardware RAID5 array & hotswapable backplane) used space: 1.28 TB Free space: 4.16TB
Adobe Premiere Pro CS5 VERSION: 5.0.3 (005 (MC: 218798))
Operating System    Microsoft Windows 7 Ultimate Version    6.1.7601 Service Pack 1 Build 7601
System Manufacturer    Intel Corporation
System Model    S5520SC
System Type    x64-based PC
Video    NVIDIA Quadro FX 4800 driver v.320.78
Display        Dell 27" LCD (DisplayPort)
Display        Dell 27" LCD (DisplayPort)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Installed Physical Memory (RAM)    96.0 GB
Page File Space    0 bytes
PREMIERE PRO CS5 SETTINGS:
Monitor PLAYBACK RESOLUTION: Full
Monitor PAUSE RESOLUTION: Full
(regardless of this setting, the problem persists)
PREFERENCES:
MEMORY:
Installed RAM: 95.9 GB
RAM reserved for other applications: 10 GB
Optimize rendering for: Performance
(Changing this setting to 'memory' does not resolve the problem)
MEDIA:
Media Cache Files
X - Save Media Cached files next to originals when possible
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
(User Profile folders were relocated to D:\ from within the properties of each folder's 'LOCATION' tab. This is the same configureation I had prior to rebuilding the C:\drive. Testing under a new profile where it's allowed to stay on teh system drive does NOT resolve the problem.)
Media Cache Database
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
PROJECT SETTINGS:
Scratch Disks
Path: D:\Users...\My Documents\
General
Video Rendering and Playback: Mercury Playback Engine GPU Acceleration
(Setting Viideo Rendering and Playback to 'Sofware' does not resolve the problem)
If any of y'all have any other suggestions, I'm all ears.
Thank you.

I'VE RESOLVED THE PROBLEM!
PREFACE:
OK, I am hoping that through this week-long Operating-System-and-Software-reinatalltion excerise of mine, I have revealed something that everyone -- whom have been cursing Adobe over -- can apply to their systems to resolve this jerky video problem within PremierePro CS5 (and quite possibly other versions, too).
If you've read my post above, you've seen all the steps I've taken to resolve the problem. I've read many posts, some of which have mentioned hardware upgrade / opitmization steps that one may take to enhance performance, and hopefully resolve the problem. I've read where people have taken these steps and have still experienced the problem...and then they curse Adobe. Fer-shame, fer-shame, fer-shame! (nod to Gomer Pyle).
In my case, I knew it wasn't an Adobe issue, as it had worked flawlessly before; and, it wouldn't require a hardware upgrade or reconfigureation, as my system is completely maxed out with two processors, a system drive and a hardware RAID5 array, a CUDA-suported nVIDIA 4800 FX card, and 96 GB of RAM. bla bla bla, puke...whatever. Bottom line is this:
It's not a software issue. It's not and Adobe issue; and Gawd no! It's NOT a PC vs. Mac issue! HA HA. The software had worked swimmingly well prior to the reinstallation / 'lobotomy' I perfomed on the system drive.
SOLUTION FOR ME:
Download and install the updated drivers for the motherboard. Mine is an Intel Workstation Board S5520SC. Intel has an INTEL DRIVER UPDATE UTILITY which automatically scaned my Intel system and identified drivers which needed updating. A very handy, time-saving tool!!! Here's the URL: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
The scan revealed two Intel drivers needing an update:
Intel Chipset
Wired Networking
and one non-intel driver:
Creative Labs Sound Blaster X-fi
I downloaded and installed these three drivers, rebooted, and tested PremierePro, and was extatic to find this resolved the problem.
If you have a motherboard from another manufacturer, then you may want to navigate over to their wibsite to locate chipset and other updated drivers for your motherboard.
ROOT CAUSE:
While Microsoft Windows 7 Ultimate was able to install certain default drivers during the Operating System installation (keeping in mind that this was done on an Intel Solid State Drive that I formatted using Quick Format) these default chipset drivers apparently weren't current and were ultimately the root cuase of the jerky video playback within PremierePro CS5.
Peace

Problems updating projects to new versions of Premiere (CS5 to CC and CC to CC 2014) Memory consumption during re-index and Offline MPEG Clips in CC 2014

I have 24GB of RAM in my 64 bit Windows 7 system running on RAID 5 with an i7 CPU.
A while ago I updated from Premiere CS5 to CC and then from Premiere CC to CC 2014. I updated all my then current projects to the new version as well.
Most of the projects contained 1080i 25fps (1080x1440 anamorphic) MPEG clips originally imported (captured from HDV tape) from a Sony HDV camera using Premiere CS5 or CC.
Memory consumption during re-indexing.
When updating projects I experienced frequent crashes going from CS5 to CC and later going from CC to CC 2014. Updating projects caused all clips in the project to be re-indexed. The crashes were due to the re-indexing process causing excessive RAM consumption and I had to re-open each project several times before the re-index would eventually complete successfully. This is despite using the setting to limit the RAM consumed by Premiere to much less than the 24GB RAM in my system.
I checked that clips played; there were no errors generated; no clips showed as Offline.
Some Clips now Offline:Importer CC 2014
Now, after some months editing one project I found some of the MPEG clips have been flagged as "Offline: Importer" and will not relink. The error reported is "An error occurred decompressing video or audio".
The same clips play perfectly well in, for example, Windows Media Player.
I still have the earlier Premiere CC and the project file and the clips that CC 2014 importer rejects are still OK in the Premiere CC version of the project.
It seems that the importer in CC 2014 has a bug that causes it to reject MPEG clips with which earlier versions of Premiere had no problem.
It's not the sort of problem expected with a premium product.
After this experience, I will not be updating premiere mid-project ever again.
How can I get these clips into CC 2014? I can't go back to the version of the project in Premiere CC without losing hours of work/edits in Premiere CC 2014.
Any help appreciated. Thanks.

To answer my own question: I could find no answer to this myself and, with there being no replies in this forum, I have resorted to re-capturing the affected HDV tapes from scratch.
Luckily, I still had my HDV camera and the source tapes and had not already used any of the clips that became Offline in Premiere Pro CC 2014.
It seems clear that the MPEG importer in Premiere Pro CC 2014 rejects clips that Premiere Pro CC once accepted. It's a pretty horrible bug that ought to be fixed. Whether Adobe have a workaround or at least know about this issue and are working on it is unknown.
It also seems clear that the clip re-indexing process that occurs when upgrading a project (from CS5 to CC and also from CC to CC 2014) has a bug which causes memory consumption to grow continuously while it runs. I have 24GB RAM in my system and regardless of the amount RAM I allocated to Premiere Pro, it would eventually crash. Fortunately on restarting Premiere Pro and re-loading the project, re-indexing would resume where it left off, and, depending on the size of the project (number of clips to be indexed), after many repeated crashes and restarts re-indexing would eventually complete and the project would be OK after that.
It also seems clear that Adobe support isn't the greatest at recognising and responding when there are technical issues, publishing "known issues" (I could find no Adobe reference to either of these issues) or publishing workarounds. I logged the re-index issue as a bug and had zero response. Surely I am not the only one who has experienced these particular issues?
This is very poor support for what is supposed to be a premium product.
Lesson learned: I won't be upgrading Premiere again mid project after these experiences.

.MOD files in Premiere CS5

I am trying to import .MOD files into Premiere CS5, with no joy.
If I change the file extension to .MPG, Premiere can import the video, but no audio.
Can anyone advise on how I can import .MOD files successfully, with both video and audio?
Many thanks

Oh boy, JVCs ill fated .mod file extension. I hate this thing. Hate it. It's next to impossible to do anything with. When i first got a JVC tapeless cam in 2004 it ran this extension. All I used with it was the pack in software that worked fine. Well over the years I started using more advanced cams and more advanced software. A year ago I wanted to go back to that old cam and use some old footage for a DVD project, in PrPro cs4. It was a nightmare. I finally, FINALLY, found the answer after using several NLEs, converters, and such to get it to work in adobe. So here's what I found:
from my experience, basically all interactions with JVC tapeless media has left little to be desired. i have done many dvds in .mod format because i had gotten the very first JVC tapeless cam in 2004ish. the .mod files are.... almost imposible to work with, outside of using cyberlink. i tried sony. i tried adobe. i tried FCP and all results... were dismal. (i was filming in 16x9 the rograms that DID read .mod, which was Vegas, would not accurately flag the footage as Widescreen) the ONLY way i could get the widescreen footage to show up as widescreen other than using cyberlink software was to use
http://www.cyberlink.com/products/mediaespresso/overview_en_US.html
and convert to a straight up no strings .mpg2 file. then it worked in the other NLEs. So basically the only way I could successfully import and edit a .mod file with premierepro was to use that converter.

How do I get my Adobe Premiere CS5.5 workspace to work

I am having trouble getting my workspace in Adobe Premiere CS5.5 to open up. Nothing works and I cannot figure out why. Can anyone help? I have tried to reinstall the program and resesting the workspace and it did not help.

Per the following your headset uses the HFP or the HSP profile. The iPod only supports the A2DP profile for headphones.
http://plantronics.custhelp.com/cgi-bin/plantronics.cfg/php/enduser/std_adp.php? p_faqid=8079&p_created=1125099403&p_sid=OoSQvBuk&p_accessibility=0&p_redirect=&p _lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MzgsMzgmcF9wc m9kcz0mcF9jYXRzPSZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfc GFnZT0xJnBfc2VhcmNoX3RleHQ9UGxhbnRyb25pY3MgVm95YWdlciA1MTA!&p_li=&p_topview=1
Aslo see:
iPhone, iPad, iPod touch: Supported Bluetooth profiles

Adobe Premiere CS5 error codec missing. What to do?

Adobe Premiere CS5 is unable to support a Quicktime movie file 1440x1100. error codec missingAdobe What to do?

Exactly what is inside the file?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Need help using Waves 64bit, 3rd party plug-ins with Premiere CS5

I'm trying to install and use a bundle of 64bit 3rd party audio plug-ins from Waves in Premiere.
I am on a Mac running OS 10.9.3.
I can't figure out how to get Premiere CS5 to recognize my 3rd party Waves 9.3 bundle.
The plug-ins are listed and fly by one by one on the loading splash screen while Premiere launches. I can't find them anywhere in Premiere once it launches. Aparently both the VST and AU units work. But how? Where/how do I load the plug ins so I can access them in the audio effects folder?
thanks in advance!
Alex

i think the audio plugin manager was something new added, but i dont remember when. as im looking thru older threads at cs5, they make it sound as if premiere will just load and use what it can. when an effect doesn't show up, its usually cause premiere determined it couldn't use it. if you have the 64-bit version of premiere and 64-bit audio plugins, they should work, unless premiere has some issue with them. i think waves uses vst3 and AU (audio units)? while vst2 should work in cs5, im not sure if vst3 or au are supported until cs7. so im at a loss, unless someone else knows better. if you have access to audition, you can try to load them in there to use.
Premiere Pro CC (7.0) | Premiere Pro New Features
Premiere Pro Mac - VST & Audio Unit Support - Something is wrong....
VST Plugins work in CS4, not in CS5
VST plug-ins not loaded at all Snow Leopard 10.6
Virtual Studio Technology - Adobe Premiere Pro

Premiere CS5 crashes every time I select the effects tab.

I'm running windows 7 (64bit) with the latest version of Premiere CS5 (I think it was 5.0.3, or maybe 5.0.2? Either way the updater said it was the current version). Every time I select the "Effects" window in my layout premiere crashes. It used to work perfectly, then a week or so ago I noticed one of my projects was crashing when I tried to open it. Since then, that project has crashed for me every time, and while I can import it into a new project safely, now I can no longer open my effects window (or apply effects).
I have already tried uninstalling 3rd party effects, uninstalling and reinstalling Premiere (all of CS5), and resetting my preferences. Nothing helped.

What CAN happen is that a Windows update will change some DLL in Windows that breaks something in software... usually related to the graphics adapter
What is your brand/model graphics adapter, and what is the device driver version?
IF you have nVidia...
How to determine your nVidia driver version
Right click in any open area of the Windows desktop
Select NVIDIA Control Panel from the popup window
Select SYSTEM INFORMATION at the lower left corner
Driver version should be the 1st line in Details
I have a GTX285 using driver 296.10

Rendering in Premiere CS5 vs Adobe Media Encoder? Which is better?

Exactly what the question says. Is there a difference between rendering in Premiere CS5 to rendering in Adobe Media Encoder? Leave your thoughs. Thanks!

Then I have made a mistake. I thought that the AV Export function under File>Export had been fully moved to AME. Obviously, I am incorrect.
No, you're correct: there is not Export > Movie command any longer, and hasn't been since CS3. With CS4, that particular functionality was eliminated, as all exports went through AME, and were logged in the AME queue.
Things have changed yet again with CS5. There is still no Export > Movie as there was in CS3 and earlier; everything still must be encoded through AME. However, in CS5, when you initiate the export, you have two options: Export and Queue. The latter option does what CS4 exports did: they go into the AME queue for sequential export. The former option basically launches a "headless" version of AME and exports as a one-off. The export is still being performed by AME; it's just that you don't have the virtue of it working in the background as it does with the Queue button. I've also encountered some weirdness with Export when it comes to cropping and using hardware MPE, but that's a different story. I haven't done any hard-and-fast tests of which is faster--Export or Queue--but I'd take Harm at his word that Queue is the faster option.

Adobe Premiere CS5 and Open Directory users - Premiere fails to start

We have several class rooms with desktops that are configured for Open Directory.
When a student logs in he's actually working in his home folder on the server and his user is also managed by the server.
This works fine for all the applications that we're using except for Adobe Premiere CS5 and Adobe After Effects CS5. Whenever a student tries to start one of them the application will hang and only a force quit can stop it. It is impossible to start these applications.
However, it is possible to use Premiere and After Effects using a local standard on the desktops. But I don't want to go that route. I want the managed users to be able to use those applications.
Has anyone found a solution for this?
Are you able to use this applications in a same environment?
I've played a lot with the permissions on the library, system and Adobe folders, but the problem doesn't seem to be related to them.
Setup:
AFP Server: Xserve intel running Mac OS X Server 10.6.5
OD Servers: Mac Mini Servers running Mac OS X Server 10.6.5
Clients: iMacs intel running Mac OS X 10.6.6

Safe Mode disables a lot of drivers and services, like networking. That would seem to indicate that something is running on your system that interferes somehow.
I'm just not sure how you'd go about tracking that down.

'Easing' in Premiere CS5

Similar Messages

Maybe you are looking for