Easy DMS 6.00 SP09 - can not logon

Hi Gurus,
I am testing Easy DMS SP09 (and SP09 Patch 1), but everytime I want to logon the logon screen disapeers for a few seconds and then appears again and wants me to logon again.
When I press the cancle button I get a msg box with "unkown error".
I can use SP08 and all former versions without this problem so i guess something changed in SP09.
Does anyone of you has the same problem?

Hi,
did you uninstall SP08 before you install SP09 patch 1?
If not, please uninstall EasyDMS once again and then install SP09 patch 1 again.
Please try to reset the RFC Cache as well and test if this is usefull. You will find the Reset button in the settings menu of EasyDMS.
Best regards,
Christoph

Similar Messages

Easy DMS 6.0 SP09 - can not view .tif files

Hi,
I have a problem concering viewing tif files. When I try to view a tif file the file, easy dms copies it to
the work directory but doesn´t view it. It works well with pdf, doc, etc.
With SP07 I can view tif files.
Any Ideas?

Hi David,
we have EasyDMS SP09 and it works fine with tif-files.
Which application do you use to view tiff-files ?
Did you write a trace-file ?
regards Iring

Built-in Admin and local admin accounts can not logon locally

When I attempt to logon locally to a Windows 7client as the built-in administrator or local admin I receive the message "You can not logon because the logon method you are using is not allowed on this computer"
I can logon as a network administrator. I run gpedit.msc to see the current group policy.
Local Computer Policy/Windows settings/Security settings/Local policy/User Rights Assignment/Allow log on locally is set to EVERYONE, Administrators
Local Computer Policy/Windows settings/Security settings/Local policy/User Rights Assignment/Deny log on locally is set to NONE
This makes no sense as to why the local admin or built admin cannot logon.

Hi,
What is the network environment? Are you in a domain? Group Policy processing has a precedence, local GPO has the lowest priority, please make sure that it's not overwritten by other GPOs.
After setting the policy, make sure to run gpupdate /force to update the policy.
Does this issue happen only on this specific computer? Another situation is that the profile is corrupted, delete the profile and recreate one, and check if it works.
Yolanda Zhu
TechNet Community Support

SAP* Activated but SuperAdmin can not logon

Hi there,
After EP60.2 SP4 default installation, (HP-UX/Oracle9i), SAP*/06071992 can not logon a instructed, even the SAPUM.log shows:
Aug 30, 2004 7:25:14 AM | Warning | SAP* | LOGIN.OK | USERACCOUNT =
UACC.SUPERUSER_DATASOURCE.SAPASTERISK | | IP Address=[useripaddress]
Any solution?
Regards,
AAAttar

Hi all
Based on : <i>"When using SAP*/06071992, the screen and the form refreshes, nothing happens. if I choose diffirent password, I got msg.:
User authentication failed"</i>
somtehing must go wrong with the dynamic session cookie used by portal.
I suggest u check cookie handling on your browser (by the way which one is it ?)
Cookie handling can also be affected by your client os (XP, 2k, 98...) so i suggest some testing on other clients.
Note : I experienced similar pb and found out ultimately that IE6 stops handling dynamic cookies URL contains unsupported DNS characters (like underscores...)
good luck
Frank

Can not logon using akype account on Samsung Smart...

Just updated Skype on my Samsung smart TV. Now i can't logon. Error is incorrect password. Checked with windows 7 and windows 8. I can log on using microsoft account, but TV wants skype name. Seems there was a similar problem a year ago. Is this problem back?

At the moment you can only sign in to Skype on the Samsung TV using a Skype Name. If you normally sign in to Skype on another device using a Microsoft Account (which is in the format of an email address), then you cannot sign in on the Samsung TV using the Microsoft Account at the moment.
The easiest solution for now, is to create a new Skype account for use on the TV - you can do this on the TV itself by selecting the 'create an account' option on the main Skype menu.

Basis SP 18 to 20, can not logon through SAPGUI - Syntax Error

Hello Experts,
We had started ECC6.0 SP18 to SP20 patches and now we are getting Syntax error in program "CL_WB_CROSSREFERENCE==========CP ". for most of the transactions executed.
1. Job RDDIMPDP is also failing with message
Program RDDIMPDP is running in client 000
Context TERNAL_INFOS does not contain any fields
Context TERNAL_INFOS contains errors and could therefore not be generated
Context BANK_CTX_JC_REPORT modified
Internal session terminated with a runtime error (refer to ST22)
Job cancelled
2. Here are the details of this short dump, as soon as we get the short dump we get message in the status bar saying "Context BANK_CTX_JC_REPORT modified".
Error in the ABAP Application Program
The current ABAP program "SAPLSEWB" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
     "CL_WB_CROSSREFERENCE==========CP " in include
     "CL_WB_CROSSREFERENCE==========CM005 " in
    line 7:
""PROGRAM-" expected, not "PROGNAME_""
The include has been created and last changed by:
    Created by: "SAP "
Last changed by: "PEARSONA "
    Error in the ABAP Application Program
The current ABAP program "SAPLSEWB" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program
     CL_WB_CROSSREFERENCE==========CP :
    ""PROGRAM-" expected, not "PROGNAME_""
Trigger Location of Runtime Error
    Program                                 SAPLSEWB
    Include                                 LSEWBU07
    Row                                     837
    Module type                             (FORM)
    Module Name                             PROGRAM_ACTUALIZE
Source Code Extract
Line SourceCde
807 * PROGRAM_ACTUALIZE, ADD_CHILDS und PG_COMPONENT verwendet
808
809   previous_id = '1'.
810   xtype = 'C'.
811   IF xprogram(4) = 'SAPL' OR xprogram+1 CS '/SAPL'.
812 *   Funktionsgruppennamen bestimmen
813     l_program = xprogram.
814     CALL FUNCTION 'FUNCTION_INCLUDE_SPLIT'
815       EXPORTING
816         program   = l_program
817       IMPORTING
818         namespace = l_namespace
819         group     = l_area
820       EXCEPTIONS
821         OTHERS    = 6.
822     IF sy-subrc = 0.
823       xtype+1(1) = 'F'.
824     ELSE.
825       xtype+1(1) = 'P'.
826     ENDIF.
827   ELSEIF current_treename(3) = 'CP_'.
828     xtype+1(1) = 'O'.
829   ELSE.
830     xtype+1(1) = 'P'.
831   ENDIF.
832
833   IF without_crossreference IS INITIAL.
834     IF scros_new_where_used_list = 'X' AND index_parallel EQ space.
835 *     neuer Index Verwendungsnachweis
836       lprogram = xprogram.
>>>>>       CALL METHOD cl_wb_crossreference=>program_index(
838         EXPORTING
839           p_name             = lprogram    " Programmname
840         IMPORTING
841           p_error            = l_error    " Fehler Index wurde nicht aufgebaut
842         EXCEPTIONS
843           program_name_empty = 1
844           OTHERS             = 2
845             ).
846       IF sy-subrc <> 0.
847 *        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
848 *                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
849       ENDIF.
850     ENDIF.
851   ENDIF.
852
3. Tried to generate the program manually through SE38 -> CL_WB_CROSSREFERENCE==========CP --> but it dumps with same message line 7:
""PROGRAM-" expected, not "PROGNAME_""
Appreciate your inputs in resolving this issue.
Raised message with SAP support but didn't hear anything till now - so seeking your experise.
Best Regards
Davinder

Hello Experts,
Further investigation on system showed that we had implemented SNOTE 1374978 - which seems to be causing the problem.
Now as Support packages (SPAM) has locked SNOTE transactions also - is there any way that we can deimplement the above sap note from our system.
Thanks
Davinder

Non-admin user can not logon to web pages

I setup an iMac, I am the administrator and I set up a non-admin user. I also setup parental controls to their default settings.
The user can log on to their account but when they go to a web page, any web page, that requires a logon, the authentication fails. I can login to the iMac as the administrator and can go to those same pages and try to logon and it works.
I tried disabling parenting controls but it still doesn't work. I don't think that I should have to change any settings to allow a non-admin user to log on to a website, but maybe there is something I am missing...
Any tips or things I should try?

It's recommended to have your Security mode on.
Anyways if you wish to, go to ''''Firefox'''' tab > ''''Options'''' > ''''Options'''' > '''''Security'''''
and do your custom settings.
Re-installing Mozilla Firefox may fix this problem.

Problem:Can not logon the new client after SCC4

Hi There,
I am doing client copy. in SCC4 i've added a new client 100, and then i try to logon to client 100 using SAP*/PASS and execute SCCL, but system always reports errors:"name or password is incorrect (repeat logon)".
can anyone tell me what should the possible problem.
Any responses will be awarded,
Regards,
Samson

HI Samson
try this
Set the profile parameter login/no_automatic_user_sapstar to 0.
Restart the application server.
Log on to the new client with kernel user SAP* and password PASS.
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/unable-to-login-with-sap-user-1423523?cv=expanded
hope this will help you
cheers
dEE

XP can not logon to network?

After installing winXP my computer reboots, starts in windows and asks for a user password. I did not create any passwords during the install. When I hit the green arrow I get an error message that windows could not log me on to the network. Any ideas would be great. I have re-installed XP twice and have the same problem each time.

I am checking with server team for any changes in LDAP, so far they can't remember any change that could affect. Especially the AD account we are using is same for couply of my other web apps as well.
In other hand, is it possible that I could use admin account since it is local account?
Here is the result of tarantella config list | grep login
login-ad-base-domain: uci.edu
login-ad-default-domain: hs.uci.edu
login-ad: 1
login-anon: 0
login-atla: 0
login-autotoken: 0
login-ens: 1
login-ldap-pki-enabled: 0
login-ldap-thirdparty-ens: 0
login-ldap-thirdparty-profile: 1
login-ldap-url: ldap://hs.uci.edu
login-ldap: 0
login-mapped: 0
login-nt-domain: orgds1.hs.uci.edu
login-nt: 1
login-securid: 0
login-thirdparty-ens: 0
login-thirdparty-nonens: 1
login-thirdparty-superusers: sgd_trusted_user
login-thirdparty: 0
login-unix-group: 1
login-unix-user: 0
login-web-tokenvalidity: 180
login-web-user: ttaserv
server-login: enabled
Thanks again for all the help to figure this out.

Install Mobile Sales 4.0 with IDES , but can not logon

Dear Sir,
I just install Mobile SALES version 4 with IDES database,but cannot logon to Mobile Sales. Who can advise what is the problem ?
Thanks and best regards,
Vimol

You seem to be missing something small somewhere.
If on your mobile client's IDES database, you have entries in table SMOUSERS, then you should definitely be able to logon to mobile client using userids available in table SMOUSERS.
Where in CRM Online are you changing password? I hope you are changing password for the user in SMOEAC, as that is what will affect.
After changing password, you need to do a conntrans on your mobile client to get the latest password on your mobile client.
What exact error do you get when you try to logon to your mobile sales application on mobile client?
Regards,
Kaushal

Why i can not logon my some web site

when i sign on my web site, the terminal shows "your session has timed out. please login again". i never have any trouble login this website. i don't know why. please advise.

I don't get any messages.
you need down adobe
What is it saying you need to download? Exactly. Word for word.

DIR no. not showing after creation of DIR from Easy DMS

Dear Friends,
I could able to create DIR from Easy DMS. But I could not able to see DIR no. after creation, so that I do not document created or not ? If created what is the no. I need to open thru search or other way.
Is it standard functionality.
Can we change this by any functioanl module or any BADI implementation?
Regards,
Sai Krishna

Hi Sai
When you creating a DIR through Easy DMS it will ask you document type and description. In the same window as prasad mentioned 4th tab "Techinal Details" you can find the document number,document type, document part and document version. After creating the document it will create in the folder with all the remaining details with default layout.
e.g: Document Description | Status Description | Document Number | Type | Version | Part | User | Change Number ... other details.
Test | Create Document | 10000000304 | DOC | 00 | 000 |...etc
Please check the DIR while creating. Surely it will be available.
Thanks
Prasad

DIR Not display in easy DMS

Dear All,
i ahave created new user ID I am able to create /search the document (DIR) in easy DMS but that document has not display in public folder.
why ?
Kindly help
rgds

Hi,
If you have created the new Document over the normal Gui the document is not automatically shown in easyDMS. Are you using the same access rights for the new user as for the old user?
Regards
Thomas

Debug Easy DMS system

Hi guru's -
I am working on SAP Easy DMS (Document Management System).. Business has asked me to suppress a pop-up box, using trace I have found the BAPI call that is causing the pop-up.. Now I need to find exact location of the code that is causing the pop-up..
Is there a way to debug ABAP code from Easy DMS front end??
Regards
Sudhakar

Hi Sudhakar,
You can activate ABAP-Debuging using Easy-DMS!
When you start the Easy-DMS-Client you will get the logon screen (deactivate auto-login).
On this Screen you can click on the SAP-Logo.
Now you will get a new window where you can activate abap-debuging.
You need abap-debuging-permission in you User-profile.
For your Problem you need to create a function called Z_EASYDMS_SHOWROOTFOLDERS
Details see http://service.sap.com/notes
Implementate following code and easy-dms won't ask for private folder:
function z_easydms_showrootfolders.
""Lokale Schnittstelle:
*" EXPORTING
*"     VALUE(PRIVATEFOLDER) TYPE BAPI_DOC_KEYS
*"     VALUE(PUBLICFOLDER) TYPE BAPI_DOC_KEYS
*"     VALUE(SHOWPRIVATEROOT) LIKE MCDOK-SELFLD
*"     VALUE(SHOWPUBLICROOT) LIKE MCDOK-SELFLD
*"     VALUE(SHOWSEARCHRESULT) LIKE MCDOK-SELFLD
showprivateroot = ' '.
showpublicroot   = 'X'.
showsearchresult = 'X '.
endfunction.
regards
wolfgang

Activate search icon in easy DMS

Dear all,
In easy DMS, Search object ICON is not active for some SAP object like sale order, assect ,hr object but it is active for vendor, customer, wbs.
Kindly let me how can i activate search icon in object link tab in easy DMS
Rgds

Dear all
Is it possible to activate the search icon?
rgds

Easy DMS 6.00 SP09 - can not logon

Similar Messages

Maybe you are looking for