EASY DMS Problem 6.0 SP11 Patch01 (Unicode), display classification data

hallo
i have installed Easy DMS 6.0 SP11. In the search result, no classification data are shown. The problem doesn't exist in 6.0 SP03. Any idea?
Regards
Hans
Edited by: Hans Koeniger on Feb 2, 2009 8:58 AM

Problem seems to be solved, perhaps by transports in the backend.

Similar Messages

Easy DMS - problem with object linking (unicode client)

Hi Gurus,
I have a problem concerning linking a materialmaster to a DIR in a uniciode environment. I tested following scenarios:
1) Easy DMS 6.00 SP10 non unicode + non unicode Backend --> no problem
2) Easy DMS 6.00 SP10 non unicode + unicode Backend        --> no problem
3) Easy DMS 6.00 SP10 unicode        + non unicode Backend --> no problem
4) Easy DMS 6.00 SP10 unicode        + unicode Backend         --> problem
Following Problem appears in scenario 4:
Our Material Number Format is ______-____-___ (6 digits - 4 digits - 3 digits), "Lexicographical" is disabled, "Leading Zeros" is enabled.
When I type in material number "111111-2222-333" and press "check all objects and read description" Easy DMS reads the description for
111111-2222-333 but after that easy dms changes 111111-2222-333 to 000001-1111-122 and when I try to save the DIR it tells me that
000001-1111-122 is not a valid material master.
As I mentioned this only appears with the unicode client + unicode backend. Any Ideas?

Hi David,
please tell us which version of EasyDMS you use currently. If you do not use EasyDMS 6.00 SP10 I would kindly ask you to see SAP note 1105699 and download this SP from the Service Marketplace.
Further please check if you have maintained the object link customizing correclty in your backend system. Therefore please see the information in the SDN WIKI area for DMS under https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/ca-dms-Object+link
Best regards,
Christoph
P.S.: Please reward points for useful information.

Easy DMS 6.00 SP10 - Releasedate?

Hi,
I´m planning a new roll out and want to use the latest version of EDMS. Does anyone know when SP10 will be released?
Is there a shedule for planned Easy DMS releases?

Hi,
easyDMS06SP10 non unicode and unicode version is already available for download.
BR,
Anirudh,

Document upload and view problem in easy dms

Dear Friend
When i upload or view documnet in easy dms it is show ftp erro and when right click on document only one time open this document thru sap and all opration is done from easy dms please guide us where is proble
Nainesh

Dear Nainesh,
as far as I know you raised also an OSS message on this question and I provided you the following reply based on your attachments:
based on your latest screenshot I think that the information at
http://wiki.sdn.sap.com/wiki/display/PLM/I001Win32error2+
could help to get this issue solved.
Best regards,
Christoph

How to enabale trace in Easy DMS ?

Hi,
I used BADI: DOCUMENT_MAIN01 & method: ASSIGN_NUMBER to assign document number. Now am creating document through Easy DMS am getting error "Exception Occurred". How can i find, where is the problem ?
How can i enable Trace option in Easy DMS ?
I saw Note 948254 & Note 661600 but don't understand properly.
Easy DMS Version : 6.0.0.0: SP11 (Unicode)
Operating System : Microsoft Windows XP
Thanks in advance.
Regards,
Sunny

Hi,
I got some clues on my queries.
I am getting some information from additional data(Characteristics values) to generate document number.
E.G.
I have 2 characteristics
1. Part Type:
                  Values: A - Type 1
                              B - Type 2
2. Part Code:
                   Values: 01- Part 1
                               02 - Part 2
                               03 - Part 3
When am creating document am selecting Part Type = A & Part code = 02 so my document number is A-02. (- : constant).
This logic is working fine in SAP - GUI.
When am creating document through Easy DMS, SAP system is not getting char values in method ASSIGN_NUMBER.
In my code i written if char values is blank then give error message. Because of this error message am getting "Exception Error" error in Easy DMS.
Any body knows why system is not getting char values in BADI when am generation DIR from Easy DMS?
Even in Easy DMS the F4(Selection) help of characteristics is showing only description not values.
Regards,
Sunny
Edited by: Sunny on Sep 9, 2008 10:21 AM

Easy dms multiple document number search

Dear experts,
We have installed easy dms 6.0 successfully. We have a problem in
usage. In selection screen we need to search "document number" field
with multiple search criteria, however the system permits only 1
entrance.
Thanks for your help.

Dear Ahmet,
based on your description I have to inform you that the mentioned behavior means to be the current standard of EasyDMS. If you want to search for documents in EasyDMS you can only enter one document type and here multiple values are not possible. So I can only recommend you to use other fields like 'description' for searching document info records of different document types.
As EasyDMS is programm in C++ no individual screens could be customizing here. This behavior is also the same in EasyDMS 7.0.
Best regards,
Christoph

Easy DMS cannot use additional data while creating a document

Hello,
We have installed sap easy dms 7.0
We have a problem while creating a new document with SAP Easy DMS.
On the DIR tab the additional data cannot be used.
Do I have to change a registry setting?
We already have defined classes and their features and values in CL02 en CT04
please help
Geert ter Harmsel

Hi,
Additional functions for object links active Indicator controls the activation of additional functions for the links of objects to this document type.
You can activate the following additional functions for an object to document link:
1) Valuation
Additonally, you can link another object to a chosen database table (See example Additional Object).
You can delete the additional information of an object link.
2) Classification
You can classify the link. You must create a class (class type 048 - object link) with the characteristics that you want to specicify for the link (For example, responsibility, organaization).
When you set the indicator these functions are active during processing of the document info recod, register object link.
Hope this is what you are looking for.
Regards,
Deepak Kori

Thumbnails created when I creat document in easy DMS

Hello,
Can somebody help to analyze this problem? When I creat a document and attach an original file to the document in easy DMS, there will be a thumbnail created meanwhile. This is not expected, and can you tell me why and how to avoid this?
Thank you.
BR
Michael

Since you are using easyDMS 7.1.2.2, note 948254 that you have applied is obsolete.
Please refer to SAP Note 1367514 for registry settings in SAP Easy DMS 7.0 &above.For 'DisableThumbnails' parameter,setting value to 1 will disable the creation of thumbnails from EasyDMS interface.See if this helps.
Regards,
Pradeepkumar Haragoldavar

Easy DMS and original content versions

Hi,
Does anyone know if it's possible to view and activate original content versions in Easy DMS? This is the same standard functionality as in SAP DMS. We are using eDMS 6.0 SP10 (Unicode)
Thanks
Tommy

Hello Tommy
If you have done configurations for content version, content versions of original file will be created irrespective of whether it is easy DMS or transactional DMS. You can not see content version directly in Easy DMS, you will have to open SAP GUI from easy DMS to see content versions in SAPGUI.
Regards,
Milind Dumbre

Debug Easy DMS system

Hi guru's -
I am working on SAP Easy DMS (Document Management System).. Business has asked me to suppress a pop-up box, using trace I have found the BAPI call that is causing the pop-up.. Now I need to find exact location of the code that is causing the pop-up..
Is there a way to debug ABAP code from Easy DMS front end??
Regards
Sudhakar

Hi Sudhakar,
You can activate ABAP-Debuging using Easy-DMS!
When you start the Easy-DMS-Client you will get the logon screen (deactivate auto-login).
On this Screen you can click on the SAP-Logo.
Now you will get a new window where you can activate abap-debuging.
You need abap-debuging-permission in you User-profile.
For your Problem you need to create a function called Z_EASYDMS_SHOWROOTFOLDERS
Details see http://service.sap.com/notes
Implementate following code and easy-dms won't ask for private folder:
function z_easydms_showrootfolders.
""Lokale Schnittstelle:
*" EXPORTING
*"     VALUE(PRIVATEFOLDER) TYPE BAPI_DOC_KEYS
*"     VALUE(PUBLICFOLDER) TYPE BAPI_DOC_KEYS
*"     VALUE(SHOWPRIVATEROOT) LIKE MCDOK-SELFLD
*"     VALUE(SHOWPUBLICROOT) LIKE MCDOK-SELFLD
*"     VALUE(SHOWSEARCHRESULT) LIKE MCDOK-SELFLD
showprivateroot = ' '.
showpublicroot   = 'X'.
showsearchresult = 'X '.
endfunction.
regards
wolfgang

Easy DMS Administration

Hi,
I want to administarte EasyDMS centrally
How can I set all EasyDMS parameters (backend-system etc.) for all users, analog to SAPgui? I cannot expect Admin-Know-How of normal SAP-user. Now I have to set each EasyDMS parameter for each user individually...
Thanks and kind regards
Natalya

Natalya,
To tell you frankly, this is one of the issues which we have a problem with in our organization as well. It means each time you configure easy dms for a user, somebody has to set up this parameters manually for each user. I think this is a draw back for easy dms.
If at all there is a way to overcome this, you can check with the operating system guys to set up a script which will install the software and parameters associated with it when the user logs on into the network for the first time into your company network.

Easy DMS 6.0 SP09 - can not view .tif files

Hi,
I have a problem concering viewing tif files. When I try to view a tif file the file, easy dms copies it to
the work directory but doesn´t view it. It works well with pdf, doc, etc.
With SP07 I can view tif files.
Any Ideas?

Hi David,
we have EasyDMS SP09 and it works fine with tif-files.
Which application do you use to view tiff-files ?
Did you write a trace-file ?
regards Iring

Easy DMS 6.00 SP09 - can not logon

Hi Gurus,
I am testing Easy DMS SP09 (and SP09 Patch 1), but everytime I want to logon the logon screen disapeers for a few seconds and then appears again and wants me to logon again.
When I press the cancle button I get a msg box with "unkown error".
I can use SP08 and all former versions without this problem so i guess something changed in SP09.
Does anyone of you has the same problem?

Hi,
did you uninstall SP08 before you install SP09 patch 1?
If not, please uninstall EasyDMS once again and then install SP09 patch 1 again.
Please try to reset the RFC Cache as well and test if this is usefull. You will find the Reset button in the settings menu of EasyDMS.
Best regards,
Christoph

Easy DMS - object linking DIRs

Hi,
I'm implementing Easy DMS currently running version v6.0 SP9. Everything is working well with SAP DMS except for one thing, object linking.
I've read other threads but no help.
My issue is I want to be able to show a DIRs relationship with other DIRs in the object links.
Easy DMS allows this to a certain extent but its useless because all it does is display the related DIRs for this DIR, you cant action anything to display these other DIRs, where as if you do the same thing in SAP DMS, you can actually get a link to the referenced DIRs and when you click on it, it will automatically navigate you to the related DIR.
Why doesn't this work in EASY, or is simply just there for show, which I find a waste of time to be honest if object links are simply for show. The same goes if I want to attach a DIR to a material same problem.
Thanks in advance
Kurt

hello Kurt,
to my knowledge,Navigation to a different dir which is attached as object link in easyDMS is not possible (like in SAP GUI).
regards,
anubhav

Short icons missing - in Win & for easy DMS 7.0

Hi SAP Folks
When we intalled easy DSM ver 7.0 (unicode) in Windows 7 , what we found out was the shortcut icons missing like create folder, create document .
It was possible only with right click option of mouse/keypad
When in Windows XP for the same easy DMS version 7.0 it is visible
Request to help in letting know what is missing .
Thanks
Achuthan

Hi Achuthan,
Anubhav is right. But at the moment EasyDMS 7.1 is in the ramp-up phase till march 2011. Afterwards it should be available in the SAP Service Marketplace.
Best regards,
Christoph

EASY DMS Problem 6.0 SP11 Patch01 (Unicode), display classification data

Similar Messages

Maybe you are looking for