Easy Enhacement Workbench - Transport request going in error

Hi All,
I have created a Date Field from EEW. This date field is used for CRM Business Activities. I have used the Wizard for creating this date field. I wanted the Date field to be relevant for BW so marked it accordingly.
I have transported both the requests (Customizing and Workbench). The workbench request got transported with error - Method Execution - for ACTIVITY_OBJECT. So we created a new project and activated the objects using Tcode GN_START. The second transport was completed with warning -
Field name FROM is reserved (Do not use structure as include in DB table)
When I go to the Test client, I see that the Customer Field Tab Page is available but the "Date" field is not there on the tab.
Is there something I have missed out that prevents the "Date" Field from transporting to the Test Client?
All help is welcome.
Warm Regards
Sulakshana

Hi,
I found the solution. Hope it helps those who need it.
Issue - Could not view fields generated thru EEWB even after transports were successful
solution - go to Tcode EEWC - map the systems.
System Type      CRM System
System Role      Development System
Description      enter the system desc
Logical system   enter your logical system     Destination
SAP R/3 Release
Namespace        Z
Short Namespace Z
with the correct mapping you will be able to see the fields
you can also refer to the following notes
649336
676439
hope this helps you.
sulakshana

Similar Messages

Workbench Transport Request

Hi Experts,
Just a quick and easy question for you guys, we have option to create workbench transport request and we didn't want to create workbench request at that time, we just want to save it as a local object. We have this opportunity in so many places for example when we create transaction variant through SHD0, or creating or assigning auth group through SE54 .and so on...
My question is if we save it as a local object and later on we need to transport the same object to QA how should we go about it because I don't see any transport option in SHD0 after we missed the workbench transport request in the first place and save it as a local object.
Please provide your feedback
Thanks
Faisal

IMO you should assign objects to the correct package when you create them, and release the transport request when you think it is ready for being tested.
Of course there are organizational aspects as well, such as development co-ordinators who should know when an object should be ready and check that it is and in which sequence the transports should go in, etc.
For that you can also use Projects in the CTS and couple them with the config (tcode SPRO_ADMIN).
Cheers,
Julius

Releasing transport request has an error during the 'export' step.

Hello Everyone,
My environment is ERP 6.0 EHP6, AIX 6.3, Oracle 11g.
We have a transport request that was created in our development system by deleting some obsolete roles. When we try to release the transport request to our q/a system it terminates with errors in the export step.
The errors are.
   End of export R3TRTABUUSR10
   no E071K or E071K_STR entries found for R3TRTABUUSR11
   Start export R3TRTABUUSR12 ...
   no E071K or E071K_STR entries found for R3TRTABUUSR13
Of course we cannot create a new transport request because the roles were deleted.
Can someone please explain to me what could have cause this type of error and possibly how to resolve it?
Regards,
Ron

Hi Ron,
As per your log, no E071K or E071K_STR entries found forR3TRTABUUSR11
no E071K or E071K_STR entries found for R3TRTABUUSR1
Looks like there is no entry found for E071K or E071K_STR in table USR11 and USR13.
Please check those table and make sure the above entries are there, if not that could be the issues.
Also, please check if these tables (USR10, USR11, USR12 USR13) are active in SE14.
Thanks
Adil

Releasing a Transport Request ends with error code 0012.

Hi,
We have a Development system and a Production System (both running on separate windows machine) but they are not connected in STMS. We perform transporting of Requests at o.s level and NOT through STMS.
We are facing this new problem - We are trying to release a Transport Request in SE01 and it ends with error code 0012. The task inside the Request is released without any error. There is no Notes in SAP Marketplace for this.
Test call of transport control program (tp) ended with return code 0012
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK EFIK900025 pf=E:\usr\sap\trans\bin\TP_DOMAIN_EFI.PFL -Dtransdir=E:\usr\sa"
which checks the export requirements, returned the following information:
Return code from tp: 0012
Error text from tp: ERROR: Buffer check failed.
System Response
Further processing is terminated.
Procedure
Check the following points:
Feasibility of the transport control program tp
Parameter settings in the transport profile
Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
Write authorization for the subdirectories
Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removed
Please help.
Regards,
Mohan.

Hi Mohan,
Nice to hear that that your problem is resolved.
For Pamater CTC, please check the below links:
Automatic transport between DEV clients ?
http://sapsolutions.searchsap.com/kw;ExtendedTransportControl/content-sap.htm
Regards,
Hari Kishan

Transport request giving an error

Hi Gurus,
I created a user exit in our DEV system and when I Wanted to transport that to QA I got the error saying
" Ended with return code: ===> 8 <==="
( 8: Transport carried out with errors.
Individual objects could not be transported successfully.)
The development class for this request consists of some screens and a message class.All are active (except message class)
Why do I get this error and How to come over it?
Thanks in advance.
Raj.

Hi,
Try activating all the inactive objects first...
Release all the Task first and then the transport the Transport Request...
Regards,
Kunjal

Workbench transport requests on EHP4 -Yes or No?

Hi,
I read from somewhere that one cannot safely transport workbench requests from a system that already has an Enhancement Pack to a system that does not have one.
Any truth in this statement? Thanks.

Hi,
Yes its true. Its not recommended to do transport between system having different releases.
Thanks
Sunny

Transport request moved with error

HI all
We have transported base objects(Infoareas,application components,infoobject catalogs,infoobjects) all in single request for both MM mdoule which got moved with lot of errors.Some of them are
InfoObject 0COMPETITOR, version M being deleted, (basic char.   not found)
InfoObject 0COMPONENT, version M being deleted, (basic char.   not found)
InfoObject 0DEL_INDIC, version M being deleted, (basic char.   not found)
InfoObject 0INT_CUST, version M being deleted, (basic char.   not found)
InfoObject 0MPN_MATNR, version M being deleted, (basic char.   not found)
InfoObject 0RT_CUSTPL, version M being deleted, (basic char.   not found)
InfoObject 0WS_ERNAM, version M being deleted, (basic char.   not found)
InfoObject 0WS_UMNAM, version M being deleted, (basic char.   not found)
InfoObject 0WS_UMNAMP, version M being deleted, (basic char.   not found)
Attribute 0WS_ERNAM from characteristic 0AGREEMENT not (actively) available
Attribute 0CND_GRANT from characteristic 0AGREEMENT not (actively) available
Attribute 0WS_UMNAM from characteristic 0AGREEMENT not (actively) available
Attribute 0WS_UMNAMP from characteristic 0AGREEMENT not (actively) available
Attribute 0CUSTOMER from characteristic 0AGREEMENT not (actively) available
Attribute 0CUSTOMER from characteristic 0APO_LOCNO not (actively) available
Attribute 0CUSTOMER from characteristic 0APO_LOCNO not (actively) available
Key figure 0APO_LOCPRI: Aggregation reference char.0APO_LOCPRI is not (actively) available
Key figure 0APO_MATDUR: Aggregation reference char.0APO_MATDUR is not (actively) available
Reslut is on BI Production we found that some of the infoobjects are inactive.
Please let me know how to solve this
Thanks,
Harika.

Hi,
You're facing three different kinds of errors
1. InfoObject 0COMPETITOR, version M being deleted
It appears that the InfoObjects you've transported have reference characteristics. For example, 0COMPETITOR has a reference characteristic 0CUSTOMER, 0COMPONENT has a reference char 0MATERIAL and so on. Please check if the reference characteristics (0MATERIAL, 0CUSTOMER etc) are already present in the target system. If not, you'll have to go to Development, include the reference characteristics in a request and re-transport.
2. Attribute 0WS_ERNAM from characteristic 0AGREEMENT not (actively) available
This is happening because the attribute InfoObject (example: 0WS_ERNAM) is not active in the target system. This object might not be active because it's reference characteristic (see point 1).
3. Key figure 0APO_LOCPRI: Aggregation reference char.0APO_LOCPRI is not (actively) available
The Key Figure (0APO_LOCPRI) has an exception aggregation defiend on a characteristic (0APO_LOCNO). This characteristic is not active in the target system. You'll need to re-transport the Key Figures along with the referene characteristic.
Solution is: find out the reference characteristics of all the characteristics for which you are facing a problem. Collect the characteristics and their reference chars together in a TR in development and retransport. Likewise, for all the KFs where you're facing an error, find out their reference chars and collect them together and retransport.
Regards,
Suhas

Derivation Rule - Workbench Transport

We are trying to create derivation rule through transaction KEDR without any values. After creating derivation rule, it is creating workbench transport request eventhough K9RE* table is client dependent.
We have different transport routes/groups for customizing and workbench. SAP Layer is assinged to workbench transport group with one another Z* layer.
When we are trying to create request it is creating workbench transport request eventhough it is client dependent. It is using KEG0 package which is assinged to SAP layer.
Workbench transport are not going to all clients and we have to move request manually to other clients.
What should we do for changing this behaviour?
Thanks,
Miral.

With detailed explanation:
I thing previous post with was not detailed enough. Please see below.
We have created two different transport group for differentiating
customizing and workbench transport request.
ZECD layer is assigned to /CUST/ group where as ZWBK and SAP layer is
assinged to /WRKB/ group.
We are moving all client independent transports (assigned to /WRKB/
group) to only 1 client in other systems.
While creating derivation rule through transaction KEDR, it is not
allowing us to assing /CUST/ group eventhough config is client dependent.
It is using package KEG0 which is assinged to SAP layer and SAP layer isassinged to /WRKB/ group in our configuration.
The Derivation rule config is client dependent eventhough it is creatingworkbench request. We would like to know why it is creating workbench
request instead of customizing request.
Thanks,
Miral.

Clubing transport requests together

Hi Experts,
We are in a peculiar situation.
I have one workbench transport request (already released & moved to R/3 test environment)
I have one customizing transport request (which I will create) in R/3 DEV environment.
Is there any way I can club these two requests together to form a single transport request which I can push in Prod.
Any thoughts will be most welcomed & rewarded with points.
Thanx in advance.
ASJ

Hi ASJ:
I am sorry, I tried the reverse (I merged Customizing Request with Workbench request). When I tried to merge WOrkbench with Cust, I got the error that you said. Maybe you can see if its possible to use the other way.
Release your Customizing Request.
Create a new Workbench Request.
Merge the old released Workbench Request into new one.
THen, again, merge the Customizing Request to new one.
THen, you will be good to go.
Ram Chamarthy

Creating transport request manually

Hi All,
I have an entry in a table, I want to transport it to other systems (QA).How can I create Transport Request manually and attach table entry to this Transport Request.
Please let me know procedure how to do this.
Thanks in advance
jog

Hi,
Check this :
Create a workbench transport request in se09 and double click on it, system opens request/task screen , go to objects tab add program id as 'R3TR' object type as 'TABU' object name as table name (ex: ZTABLE) and click on the function button , put '*' in table keys and save the request.
now transport this request , table entries will be transported to respective systems .
Regards
Appana

How to create transport request for business function activation?

Hi Gurús,
I activated LOG_MM_MAA_1 business function in development (DEV) system:
Component: SAP_APPL
Release: 604
Level: 0006
SP: SAPKH60406
I want to transport the activation to quality (QAS) system.
In SFW5 transaction --> System Settings --> Transport only generated a workbench transport request with "Status Tables Switch Framework Client-Independent" (Object type = SF02, Object = A)
Is this the only object to transport?
Is the activation of business function should be direct in QAS system?
Thank in advance
Alonso Valenzuela

> In SFW5 transaction --> System Settings --> Transport only generated a workbench transport request with "Status Tables Switch Framework Client-Independent" (Object type = SF02, Object = A)
> Is this the only object to transport?
Yes.
The "after import" method during the transport will activate the BF as it did in the original system.
> Is the activation of business function should be direct in QAS system?
No, transport it.
Markus

Dependant objects in a transport request

Hi Guys
I have a transport request with 100 custom programs in it. I have to move the transport request to
another system. Is there a way to know all the dependant objects for these custom programs?
If the transport fails due to dependancies the client is not willing to create another transport request.
Please let me know if there is a solution for this?
Thanks
Britto
Edited by: Britto Manohar on Jul 16, 2009 5:31 PM

Hi Britto,
all the Dependent Object for the Custom Program or Report..
will be stored in Table D010tab or FM "GET_TABLES"
..Pass report name it will show all the tables View used..
but the unclude of the dependent Objects in the sutom Program transport request is the issue ..
for Custom Tbales you can create transport reuest at run time ..for standadrd Tables creating transport request and include
in the cutom program transport request will create error.
Prabhudas

How to create second transport request for same programe

Hello ,
I created workbench transport request. The changes are done and still in development system.
Now I have to do another change on the same program that has to be in different transport request,
but whenever I change something, and activate it, the changes are saved in first transport. How I can
create another transport request for the same program without releasing the first one.
Thanks

Ask your basis team to provide you with a "Transport of Copies" request.
Once you get it, add your object in this request and transport. your object will be transported and the original request will not be released. Do note that the changes will still be saved in the original request but you can still transport your object without releasing the original request.
Edited by: Priyank Jain on Aug 12, 2010 4:12 AM

How to add object back to transport request?

I deleted a function module from a workbench transport request. Now, I would like to add it back to this transport request. How can I do this? When I go to the include objects on the transport organizer, I do not see an option for selection function modules to be added back.
Thanks,
Ram.

Hi Ram,
Object status locked means that the same object can not be added in another request.
The objects will be locked automatically when change/ create a object.
But in your case since you have manually added the object in TR, so you have lock to manually.
For that In SE10 itself select the request and goto request/task>object list> Lock.
It will lock the object.
Hope this helps you.
Thanks,
Arun

Retrieve version of object from transport request

hi,
I deleted my report program from a modifiable workbench transport request.
Now I want to retreive the version of program associated with this transport.
Can I do that ? (this version is not available in version mgmt of the report)
thanks in advance
B

Since this is a continuation of your earlier post:
retrieve the version of object
Please assign poin ts to that one and mark it as closed. Then I will unlock this one.
Other thread closed and this one re-opened.
Rob
Edited by: Rob Burbank on Mar 31, 2009 1:46 PM

Easy Enhacement Workbench - Transport request going in error

Similar Messages

Maybe you are looking for