Easy Link Advisor

I have a Linksys WRT54G wireless router that I had setup and installed no prob on my desk top, then I moved and was having internet problems so I decided to just uninstall all the soft ware off of the computer and restore the factory defaults on the router and reinstall the whole thing from scratch. Now when I go to reinstall it I can't get the software for easy link advisor back which I really want. last time it installed the software during the install part but when I put in the CD and click setup then one of two things happen
1. if the router is already hooked up it skips the setup and goeas right to configure which doesn't get me my software
2. if the router isn't hooked up and I go through the install where it says step by step how to hook it up when I get to install part and it tells me there's no ethernet connection to the computer which is impossible because i'm online now and it works when I have it hokked up before the setup
I can use the router but I just want Easy Link Advisor Back it was agreat app and when I try and down load it off the internet it just tells me TO USE THE SOFTWARE THAT CAME WITH THE **bleep** THING!
I've called customer service but the call gets sent to india and I can barely understnd him through the accent and they tell me they don't support LELA their own software! If you know anything please help.

Download the software from the web site www.linksys.com/easy or you can try set up wizard from www.linksys.com/downloads.

Similar Messages

  • Is the linksys easy link advisor 3.0 LELA compatible with my WRT54GS Version 1 wireless adaptor

    Hi
    I just upgraded to windows 7 and I am trying to reinstall my wireless security using WEP with the Easy link advisor 3.0 but keep getting a message that says the method or operation is not implemented. When I was running XP and the older version of easy link I had no trouble setting up the security and adding computers to the system. Any help would be appreciated
    Thanks

    Exit the Program, 
    Try to edit the compability, right click on the program icon/properties/ check the compability to run on windows xp2.
    Hope this help.

  • Uninstall easy link advisor software from windows 7

    Hello, 
    I installed a wrk160n using easy link advisor on a brand new windows 7 laptop.
    My experience with getting the router to work with my cable modem has not been very satifactory.
    I would now like to uninstall the easy link advisor, but get the following error message:
    "Service 'linsys updater' (linksys updater) could not be deleted.  Verify that you have sufficient privleges to remove a system service.
    I am logged onto the laptop with administrator rights. 
    What is the problem with getting the linksys software off a windows 7 machine? 
    Thank you,
    Tom

    No expert on windows 7, but I would assume that you may neeed to run the uninstall program as administrator. In vista, you can do it from the right click menu, but the easiest proly is to just log in as the actual admin.Even though I got admin rights in Vista, this stuff gets quirky.
    If all fails, maybe you can try to remove the service manually (google to see how).
    Message Edited by kamenjar on 12-09-2009 03:14 PM

  • Linksys Easy Link advisor

    I installed the advisor and now tried to put my log in it got error message   MSG 100 000 000 what to do?
    Solved!
    Go to Solution.

    Thanks for the reply. I was using WEP SECURITY.  I  changed to Highest Security and changed the pin.  It worked. Thanks another problem is the Icon for Linksys Easy Link Advisor dosen't comes automatically when I start or restart my Laptop. I have Windows Vista operating system and the programme is updated automatically every time when I go online. Please help me to resolve the problem that how this Icon comes automatically on Task Bar.

  • Linksys Easy Link Advisor usage

    Is it possible to input info to this server. I do not want to install Linksys Easy Link Advisor (LELA) to client computers as I do not want to share that info with client users.
    I do however want to gather more information on how these clients connect to my network. Now I kind of know which ones connect wirelessly and which ones wired. I also know which ones connect through the access point rather than directly to the router.
    What I want to do is either install LELA-like software on these client machies for them to automaticaly transmit their info to the network (so that my LELA can pick it up) or manually input this info into LELA on my end.
    Also a way to modify the images of individual items would be nice.

    You can go through this link and check if that helps you.

  • Linksys Easy Link Advisor [ Lan Connected Users]

    Hi. I am using Linksys Easy Link Advisor, I am using my Laptop and is connected through Wireless mode, Now one of my computer is connected through Lan line [ Ethernet cable]. The Lan line and Wireless both computers are working properly, but while I am using Wireless Laptop I am unable to watch Lan Connected computer.
    In Router setting I have enabled Wireless MAC Filter and all the computer like Wireless and Lan Line computers are registered. But in Linksys Easy Link Advisor the Lan Line computer dosen't appear.
    Please Help.
    I am thankful from your team side which has helped me in solving many problems for Linksys Easy Link Advisor.
    Solved!
    Go to Solution.

    I have Linksys Easy Link Version 3.11 (Build  9139.94)     Platform Version   11.1.9051.0
    I connected my Laptop wirelessly through this and now I connected one  more Laptop through Lan [ Ethernet Cable]. But I am unable to see this Lan Connected Computer. The Wireless computer can be viewed.
    I disabled firewall from all like Windows Firewall  Trend Micro Firewall, Still unable to add Lan [ Wire connected] computer through my Laptop which is wireless connected. But still I cant see the Lan Connected Computer on  Wireless Computer.
    Is there anything to do in router. I have Linksys  Wag160N ADSL2+   [MAC-00226BF1F82]
    Please help me.
    Thanks.
    Ghanshyam,
    Dubai   U A E
    (Mod note: Edited for guideline compliance.)

  • Linksys Easy Link Advisor Icon on task bar.

    I have installed the Linksys Easy Link Advisor software, I have configured everything correctly and is now  working  perfectly. I have Windows Vista and it is updated automaticaly. Only one problem is that the Icon for Easy link Advisor dosen't appear, I have to double click on the Icon on  my Desktop then it starts on the task bar. In the Guide for  Easy link advisor it says that the Icon will remain their. But when I start or restart it dosen't comes to status bar on the bottom right side  where all other Icon comes like Clock, Network  etc. Please help me to solve this or any thing is their then I will go accordingly.
    Ghanshyam
    Solved!
    Go to Solution.

    You can go through this link and check if that helps you.

  • Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit)

    I can't reinstall Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit).  When I went to Linksys site for solution for new drivers, it asked me for Hardware Version Number.  This model doesn't show one.  Any thoughts?
    Thanks!

    Sabertooth is right. If you are able to go online from your Router then you don't need to install LELA software on your Computer.

  • Get error message when setting up wireless on WRT160N using easy link Advisor

    I get this message - ERROR - EXCEPTION has been thrown by the target of an invocation -  when trying to get new laptop hooked up to lyncsys using easy link advisor

    What's the Operating System of the new computer? I've read on this link that the Linksys EasyLink Advisor (LELA) connection wizard can connect computers running on Windows XP, Vista, or 7 to the network.
    If you keep on getting the same message, manually connect the computer to the network. Here's the link to manually retrieve the wireless password.

  • Problem installing Easy Link Advisor

    I have Vista and when I start the setup of LELA, it says runtime error, invalid picture. I have a new computer and it was installed on my old one with XP, What's the problem?

    Lela is the problem.  It is not needed for anything and causes problems.

  • Easy Link 1.6 no longer works and latest version states will not work with my router

    I have the WRT54G router (version 8.00.2 firmware) and the Easy Link Software I got with it no longer works correctly (version 1.6), saying I am not connected to the internet even though I clearly am connected.  (I theorize that it tries to connect by pinging Linksys and I cannot ping Linksys using any method, so I think Linksys no longer accepts pings.)  I downloaded the newest version, thinking it would work, and the forum states it will only work with a few routers that are more recent (I bought mine in Jan 2008.)  Am I out of luck, with no verion working correctly?  I appreciated the information that was found in the Easy Link Advisor software that I no longer have.

    Cunning1_
    You are a legend!!  I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!!  I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!!  Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
    Whatever - one step and now I can enjoy my music through my house again!
    Thank you, Thank you, Thank you 

  • Easy Link to Install Oracle 9i at Solaris.

    I'm looking for an easy link to Install & Manage Oracle 9i at Sun Solaris Box.

    If you mean easest document to read before installation is to read, Installation documents from Installer CD 1, From which pre-installation chapter you should go thru before installation. It will save your time as your installation never fails if you go thru it fully.

  • Can anyone give me an easy link to reload my Adobe Acrobat Pro?  It won't accept any updates.

    My update attempts for Acrobat Pro 9.5.12 are coninually refused, claiming I have changed the program.  Not true, but oh well.  I'm having trouble finding a link to where I can uploat the entire app for my Mac.  Can anyone help?  Do I have to delete Acrobat Pro first?

    Which model Macbook Pro do you have?
    Which os version do you have?
    Which version of Safari do you have?
    Have you considered switching browsers?

  • I have ADE 2.0 and would like to upgrade to 4. How do I do this.  I can find no easy link to an upgrade on Adobe website.

    I have ADE 2.0 and would like to upgrade to 4.0.  How do I do this.  I can't find a link to do this on Adobe website or support page.

    Update it from iTunes on a computer as described at the bottom of this article; devices running an iOS version prior to 5.0 can't be updated straight from the device. It will be updated to the newest iOS release supported by the device’s hardware
    The maximum iOS version for the iPhone 3G and second generation iPod touch is 4.2.1.
    The maximum iOS version for the third generation iPod touch and original iPad is 5.1.1.
    The maximum iOS version for the fourth generation iPod touch is 6.1.5.
    If you don't know what device you have, append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
    (98874)

  • WRT160N v3 Easy Link Software not working; screen garbled

    Up until 2 days ago, this router was the best.  Then with no notice, lost all connections to wireless devices and the software loaded, but graphics on screen failed to resolve and thus unuseable.  I've uninstalled & reinstalled; set & reset; plugged & unplugged.  No other programs exhibit any graphics problems .  Any suggestions?

    You can Uninstall the Easylink advisor from your computer and do all the settings on your Router.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Here select manual configuration...Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
    - Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
    NOTE : Passphrase should be more that 8 characters...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

Maybe you are looking for

  • Adding data to my plan?

    Right now, I'm in a shared plan with my family. We have 4 basic phones, and no data. How much would it add to the bill per month if I wanted to upgrade to a smartphone and get 2gb of data per month?

  • Drill Down Report Performance issue?

    Hi, why drill down report is slower performance comparing with Action link/Navigation method? what could be the back end processing? Thanks MRD

  • ORA-01044: size of buffer bound to variable exceeds maximum

    Hello Oracle Gurus, I have a tricky problem. I have a stored procedure which has to retun more than 100,000 records. In my stored procedure, I have "TABLE OF VARCHAR2(512) INDEX BY BINARY_INTEGER". It fails when I try to get 80,000 records. I get an

  • How to Reclaim Hard Drive Space

    Hi there, I have deleted several GB of messages, folder by folder from Entourage as I have the complete set in Mail. However, I had restarted my iMac and there seems to be too small amount of hard drive space available after this delete has been comp

  • Contact not saving, multiple cards created.

    Hello, So I have a bunch of people I'm trying to manage for a project, and in order to keep their emails straight I tried adding them to my contacts so that their name appears instead of whatever weird email address they have.  However in the case of