Easy Link to Install Oracle 9i at Solaris.

I'm looking for an easy link to Install & Manage Oracle 9i at Sun Solaris Box.

If you mean easest document to read before installation is to read, Installation documents from Installer CD 1, From which pre-installation chapter you should go thru before installation. It will save your time as your installation never fails if you go thru it fully.

Similar Messages

Error while installing Oracle 10g on Solaris 10.

Hi all,
I am trying to install Oracle 10g on Solaris 10 (x86). I did every thing that is given in the Installation manual
created user,group and directories. set all the env variables.
executing the runinstaller it throws error
error in writing to directory /tmp/OraInstall2009-04-06_07-14-09PM.please ensure that this directory is writable and has atleast 69MB of disk space.Installation Cannot continue.+
*:Error 0*
I have given recursive a+rwx permission to /tmp folder and /tmp has 3.2 GB free space. am i missing some thing??
I am very new to Solaris and Oracle;Please help me with this.
Thanks.
Regards
Akhilesh Bhale

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Install Oracle 8i on solaris

Hi
I know that we can install Oracle 8i on Solaris 8.
Can we install oracle 8i on Solaris 10 ?
What is the last solaris version that supports installation of Oracle 8i?
Thanx

Metalink Certification Matrix shows that Solaris 9 was the last one.
HTH
RK

Installing Oracle 8i in Solaris Intel Version With Pentium 4

Hi Guys,
I am trying to Install Oracle 8i under Solaris 8 Intel version with Pentium 4 processor fixed.But iam'nt able to continue after I click "Install" button,the runInstaller exited badly with no response.I was told that even Installing Oracle under Windows P4 is facing the same problem,but on searching I got solution by renaming a DDL file before starting installation.Is there any similar method to do for installing it under p4 processor on solaris intel 8 version.

Dear Mr. Kumar, i am chandrasekaran from singapore, actualy i need your help regarding the intel sun os oracle. I have Intel Based SUN OS, but i try to get Oracle CD Any version either 8i or 9i for intel sun os.
One of my friend have the cd but it already damaged so that i need your help.
My address
S.Chandrasekaran, Blk 84 #07-93, Commonwealth close, Singapore 140084. If you have the cd you make one copy for me and send by post. Thank you
My email id: [email protected] or yahoo.com
by chandran.s

ORA-27102: out of memory. Faild to install oracle 10gR2 on Solaris 10

Hi, I want to install oracle on my solaris machine. I have 2.5G RAM and more than 5G swap file. But the ORA-27102: out of memory error occurred at installing the Oracle Database Configuration Assistant step(Copying database files Creating and starting Oracle instance).
The only warnings bellow:
Checking kernel parameters
Checking for BIT_SIZE=64; found BIT_SIZE=64. Passed
Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmsl=256; found no entry. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
What's the reason and how may I resolve it?
Thanks!

I set some kernel parameters like: set shmsys:shminfo_shmmax=4294967295 and so on. Restart the computer and run dbca+ and configure in advance mode. There's a stage require the size of flash_recover_segment of which the default size number is 2048M. WOW, out of memory on my pc of course.
So I think it's the parameter value during the installation progress bring on the ORA-27102 problem. However, during the first installation, there's no prompt for me to enter the parameter; or I didn't see.

How to install Oracle 10g on Solaris 10 non-global zone.

Hi,
I want to install Oracle 10g on Solaris non global zone with ASM.
I need complete doc for doing the same.
REgards
S.Ali

Check Oracle® Database Installation Guide 10g Release 2 (10.2) for Solaris Operating System.

Error installing Oracle 10gR2 on Solaris Express Developer Edition

Hi
I'm trying to install Oracle Db 10gR2 on Solaris Express Developer Edition 1/08 for x86 but it fails with the following link error:
INFO: /export/home/u01/app/oracle/oracle/product/10.2.0/db_1/bin/genclntsh
INFO: ld: fatal:
INFO: symbol `ntcontab' in file /export/home/u01/app/oracle/oracle/product/10.2.0/db_1/lib/libn10.a(ntcontab.o): section [3] .data: size 0x60: symbol (address 0, size 0x70) lies outside of containing section
INFO: ld:
INFO: fatal:
INFO: File processing errors. No output written to
INFO: /export/home/u01/app/oracle/oracle/product/10.2.0/db_1/lib/libclntsh.so.10.1
INFO:
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: *** Error code 1
INFO: make: Fatal error: Command failed for target `client_sharedlib'
Any ideas would be appreciated.
Thanks

If your version of Solaris is not supported, see the support matrix, you are on your own. This is likely the case.

Guide to install Oracle 11gr2 on solaris 10 wiht SAN storage

Hey expert,
Anyone install Oracle 11g2 RAC on solaris 10 with SAN storage before. Any link and proper document that i can follow. Appreacite you guy can assist me.
Regard
liang
Edited by: 816734 on Sep 15, 2011 2:32 AM

Please check the following link :
http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=#solaris_installation_guides
Anytime!

Install oracle 10g on solaris 9 platform without setting noexec_user_stack

Hi,
I'd like install oracle 10g software on solaris 2.9 platform without setting noexec_user_stack parameter to 1.
The problem is that i need install software before, for migrating product environment.
I can write /etc/system file but i can't reboot system until several days.
I will not start migration process until i reboot the system and parameter definitely set.
Do you know if we will can have any kind of problem???
Thanks in advance.

Thanks for your answer FZheng. But i will just install software. I will not start any oracle 10g process until i reboot the machine.
I think that oracle software installacion should not be affected. Do you know if this parameter affect to compile softwere during OUI wizard progress???.
Before going on migration process and start database i will sure that this parameter is correctly fixed.
PD.: I couldn't read metalink reference that you've suggested becouse my metalink account have problem access in this momment. During all day i've been reeding metalinks docs without any problem until this momment, bad luck.
In test environment i've installed oracle without this parameter and i've never had any problem. But this installation is more important than others becouse i ask you in this specialist forum.
Thanks again !!!

Forward me the link for installing Oracle Client 10g on Windows 7 64-bit?

Hi
Can anybody send me the link for downloading Oracle Client 10g on Windows 7 64-bit?
Regards

Arizuddin wrote:
Actually i installed TOAD for oracle v9.5 on laptop with Windows 7 ultimate
it gives 'Cannot find OCI DLL: oci.dll'. It seems TOAD for Oracle is a 32-bit only app, which means that it requires a 32-bit Client.
You might also want to stay away from installing Toad under "Program files (x86)".
Consider taking a look at Oracle SQL Developer - a very good alternative to the toad.
http://www.oracle.com/technetwork/developer-tools/sql-developer/index.html
For other questions specific to Toad, please see e.g. toadfororacle.com.

Installing Oracle 9i in Solaris 10

Hi
I have a server having OS Solaris 10 SPARC Edition 64 bit. I want to install Oracle 9i client in that server. I have seen in many forums ppl saying that Oracle 9i is not compatible with Solaris 10 and there are some issues related to patches.
Can anyone help me in this matter.
Thanks and Regards
Abhishek Verma

Thanks for your replies guys.
I successfully installed Oracle9i client in Solaris 10. Initially I had to set up the Kernel parameteres as Prajeevan has suggested. Later the installation was quite staright forward and same as for Linux server.
Thanks for giving your precious time for replying to my query.

Can't install oracle 10g on solaris v10 X86!!!

Hi everybody, I got error messages below:
====================================================
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.6, 5.7, 5.8 or 5.9. Actual 5.10
Failed <<<<
=====================================================
Does that mean there is not Oracle 10g for Solairs 10 X86?
Where can I find Oracle 9i for Solairs x86?
Thanks advance!

10g on Solaris 10 needs special handling:
1. Execute runInstaller with the -ignoreSysPrereqs option.
2. Select 'Do not create a starter database' when installing Oracle 10g.
3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.

Installing Oracle 10g on Solaris 7

Hi,
Can I install Oracle 10g R2 on Solaris 9? I tried searching for the answer on various forums but could not find anything direct.
Thanks in advance!!

Hi,
Can I install Oracle 10g R2 on Solaris 9? I tried searching for the answer on various forums but could not find anything direct.
Thanks in advance!!

Installing Oracle 10G on Solaris 10 (Intel)

Hi,
I attempting to install Oracle 10G Release 1 on Solaris 10 OS (Sun Blade 1500). When attempting to run the installer, I get the following error:
$ /runInstaller
./runInstaller: /export/home/app/oracle/Disk1/install/runInstaller: cannot execute

Hi,
When I download the file from oracle I executed the following commands as root
#gunzip oracle_file
#cpio -idcmv < oracle_file
#cp -r Disk1 /export/home/app/oracle (this is the oracle's user home dir)
#chown R oracle:oinstall /export/home/app/oracle
#chmod -R /export/home/app/oracle
#su - oracle
$env | more (all my environment variables are set)
$cd Disk1
$ls -l
-rwxrwxr-x 1 oracle oinstall 948 Dec 22 14:56 runInstaller
$./runInstaller
./runInstaller: /export/home/app/oracle/Disk1/install/runInstaller: cannot execute
$. cd install ls -l
-rwxrwxr-x 1 oracle oinstall 81004 Dec 22 14:56 runInstaller
The owner of the file and permissions looks okay to me. I don't understand what the problems is

Error while installing Oracle 10g on Solaris 9 x86

Hi all,
I got several error after install oracle 10g. After I run the root.sh. It prompt :
Starting Oracle CSS service under init(1M)
Expecting the CRS daemons to be up within 120 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
and when I start sqlplus, it prompt:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Intel SVR4 UNIX Error: 2: No such file or directory
and following the error message prompt every minutes.
"oracle: (Oracle CSSD will be run out of init)"
"root: Failure in CSS initialization opening OCR."
I don't think reinstall oracle will solve my problem if I don't figure out what going wrong. Could anyone tell me what I need to do? Thanks very much for helping.
Cheers,
Alex

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Easy Link to Install Oracle 9i at Solaris.

Similar Messages

Maybe you are looking for