Easy One with PreparedStatement
Can any one tell me, when I prepare a statement (PreparedStatement) and loop assigning separate values within each loop, is this process called Binding? I was under the impression it was but have been unable to prove my thought.
Calling the setXXX methods, is the actual binding process. Not the looping :-)
Similar Messages
-
Two Firefox at the same time, (one with images, other without)?
Hi,
Is is possible to use two firefox browsers at the same time, the one with images enabled, the other disabled?See this easy to follow directions:
http://www.callum-macdonald.com/about/faq/multiple-firefox-instances/ -
Ipad Keyboard (one with docking station attached to keyboard)
I had just recently purchased the Ipad keyboard, the one with the docking station attached to the keyboard. The problem is I use it in my car a lot and find it difficult to use. Is there anything 3rd party that will allow me to connect a cable to the ipad and then one to the keyboard so that I can type without the Ipad being in the docking station. It would be so much easier to use. Additionally I have to remove my Ipad from it's case to use it as well and risk damaging it when it's not in a case. Any feedback and assistance would be greatly appreciated. Thanks for your time everyone.
Yes there is. Check it out here.
-
Cannot select a music into slideshow and book slideshow presentations. In the older Mac this was easy. With new Mac OS X 10.6.8 it should work as I can stop the slideshow with cursor but pop up window for choosing music is dead. I cannot drag music into it. Preselected music just goes on.
I am talking about iPhoto. In my old Mac even in Books choosing slideshow gives a pop up where you can select a music from I tunes library. In this new one I can stop the slideshow with cursor and it shows music option but it is, as I said dead. Does not response at all to commands.
-
I have a macbook with 1 gb ram, 2 rams with 512 mb. I am planning to replace one with 2gb ram. Do I need to reinstall OS if I replace one of them? Please help. Thanks.
If you want to upgrade your RAM it;s very easy on most MacBooks with the removable battery. We'll need to know the model to further advise you. Go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier.
1,1 (Early 2006) can handle 2gb of 667mhz PC2-5300 RAM
2,1 (Late 2006 & Mid 2007) can handle 3gb of 667mhz PC2-5300 RAM
3,1 (Late 2007) can handle 4gb of 667mhz PC2-5300 RAM
4,1 (Early 2008) can handle 6gb of 667mhz PC2-5300 RAM
For RAM check DealRam.com http://dealnews.com/memory/prices/systems/Apple-Mac-Book-PC2-5300-DDR2-SODIMMS/4 3938/2GB.html or OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/
Here's instructions on replacing RAM http://homeoffice.consumerelectronicsnet.com/articles/viewarticle.jsp?id=44404 -
What is the best design tablet with stylus to have an easy interface with Adobe Photoshop?
What is best design tablet with stylus for use with Adobe Photoshop for this holiday seasons offering 2013?
I am trying to find a tablet with good stylus to work with Adobe Design products primarily Photoshop. I would like one that worked in layers with photoshop.
The folks a Wacom don't even answer the phone just a recorded message go to the web site with questions. Not a good sign for a company. So what is a good design tablets for pressure sensitive stylus? Will wacom cintiq tablet interface well with Apple Imac IOS 10.8?
I love my Samsung note 3 but it will not easily transfer images to apple Imac 10.8.
Please help me find tablets with good adobe design interface? Just tell me which way to jump. It is easier to leave Apple for PC or Android than to abandon Adobe knowledge. The products have to work together.
Does wacom Cintiq not embrace an easy interface with Apple Imac IOS 10.8 latest software. Wacom seems to be championing Windows 8 as a companion to their tablet interface.
Can an Ipad deliver good layered designs using adobe software design programs and a stylus?
What should I buy for an Adobe design tablet with pressure sensitive stylus for ths Holiday Season?
Should i wait until next year?
Will the tablet work in Photoshop layers?
this link seemed ominus
http://forums.adobe.com/message/4950467subhash007 wrote:It's not 802.3ad link aggreagated interface. In the switch side, the ports will be configured as normal access ports and the bonding config will be done on the server side.
To be honest, I don't understand how the Linux bonding mode can work without anything configured the other end.
My understanding of 'bonding' comes from Multilink PPP (MLP) where the data stream is chopped up and split across two (or more) circuits. At the other end, a similar MLP-enabled device reforms the data stream from the multiple circuits, maintaining packet order. But this requires MLP-enabled 'bonding' devices at each end.
Perhaps you could help me better understand the Linux bonding...
subhash007 wrote:If any single homed server is connected to Switch 2, what will be traffic path for its data packets?Switch 2 ------------------> Switch 1 ----------------------> Active firewall ORSwitch 2 ------------------> Passive Firewall -----------> Active Firewall
If the firewalls operate in the same fashion as Cisco ASAs, then the inter-firewall link doesn't carry traffic. It's for failover detection and HTTP replication only. But like I said, I'm not familiar with this vendor's products.
subhash007 wrote:Also will there be any change in traffic path if the trunk between Switch 1 & Switch 2 is converted to L3 routed interface? Since there is no VRRP, i can convert the trunk to L3 right?
Same as above. -
Am I the only one with a dispatch date 19th July?
I did order on 19th June anyone else waiting this long?
I went to the Apple Store on launch day and bought my iPhone 4. No reservation, just went in and bought it. Much easier than pre-ordering. Enjoy the iPhone when you get it. iPhone 4 is excellent.
Oh to answer your question, it's unlikely you are the only one with a specific date. If Apple were allocating one iPhone per pre order per day, the backlog would take until iPhone 26 to get through. -
i purchased a new computer, how do i transfer all of my itunes content from the old computer to the new one with out loosing songs, apps, pics ...ect
Copy the entire iTunes folder from the old computer to the new computer to move iTunes content.
As for pictures, copy them from where there are on the old computer to the new computer... this has nothing to do with iTunes.
Alternatively, if both computers are Windows based, use the Windows Easy File Transfer Utility to move everything. -
Hopefully this is an easy one. how do you disable timed slide advance in Captivet 3? I have not been able to find it anywhere. Thanks
Welcome to the all volunteer Captivate forum. Several options.
- Add <Back and Next> buttons on each slide manually
- Place click boxes on the screen. This is a neat way to do it because the click box can be the entire screen with a 100% transparency. However, users must know to click the screen to advance and then there is no <Back or rewind type option
- Correct interactions can be added with click boxes. Use Captions to ask the user to do something and when they click the right place, the series advances.
Hope this helps a bit.
Joe C. -
Greetings;
This should be an easy one, just one that is driving me crazy.
I have 10 instances from 2 tables displayed on a form. The first field is to enter a stock number, the second field looks up the description in a reference table. This works fine in the first row, but, when a stock number is entered in the second row, instead of entering a description in the second row, the description in the first row is "updated". Please, what am I missing??I'm not sure I got it right.
Does that mean you have 2 data blocks? If so, it's quite clear that, when being in the first block and refferencing the items in the second, that would have effect on the record that is current in the second block, that, in your case happens to be the first record.
If it is like I imagine, then you should put both fields (including the refferenced one(s)) in the same data block with a data source set as the table you update, but have the refferenced field(s) set as non-database item. The refferenced field(s) are to be populated through a select in the post-query trigger on the given block, or, eventually in when-validate-item.
Sorry, but if this can't help you, you should study more and especially be more specific in what you ask. -
I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?crazyshark wrote:
I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?
You can't do this, and you can't transfer purchases between accounts. There is no conflict about using one ID for iTunes, iTunes in the Cloud and iTunes Match (the ID you've been using for iTunes) and using the other ID for iCloud. -
I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) account. I get the error message "A copy has been placed in your Outbox. The sender address "name"@tiscali.co.uk was rejected by the server".
Hi apmichael,
If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden -
When I first imported music from my CDs onto my iTunes library, all the songs appeared, but those with the album artist and guest/additional artists they appeared in their own album under the same album name. After searching through iTunes help and support, I learned how to put all the songs under the same album (part of a compalition) and add the additional songs information, artwork, lyrics, etc. After getting all the music (imported from my CDs) onto the iTunes library and in their album. I synced my music onto my iPhone. (My iPhone is a 3GS)
Once the music was on my iPhone i noticed that the albums appeared in 2s again. One was the complete album with all the songs, song info, etc. together (solo tracks and/or one with multiple artists) and another album of the same name, artwork, etc. with 2-4 of the songs from that album. Since all I saw need for was to have the completed album on my iPhone, I deleted the album with only 2-4 of the songs. When I went back and selected the completed album, all the songs I had deleted from the incomplete album were also deleted from the completed album too! I just couldn't figure out why it did that and my my friends with iPods and iPhones said they didn't know what caused it either. So now I'm here with the idea how to fix this problem.
If anyone has a solution to this problem, please reply. It will be greatly appreciated.I'm not sure why this happens, but I found a workaround. Below the album title it will list the artist(s). The issue seems to happen when there are multiple artists. For example, an Album titled "Over the Sea to Skye" has The Chieftains and James Galway as artists. Some tracks (for whatever reason) will list only one of these and result in the playlist showing what appears to be multiple albums. You can click on the artists and it will highlight. Paste in what is appearing on the other "albums" and it will then show as one:
Hope that is somewhat clear enough to help. Doesn't fix whatever the issue is but it is a workaround. For me this is only happening with CD's that I have imported. -
"if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
I do not have the option box to "show status in menu bar"
I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical pop-up every 2 hours. I cannot find how to stop it.
Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
Can anyone out there help me please."if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
I do not have the option box to "show status in menu bar"
I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical pop-up every 2 hours. I cannot find how to stop it.
Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
Can anyone out there help me please. -
When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my apple ID email address keeps popping up on his phone when he tries to download an app. We do not want to have all of the same apps on our phones. How can we change the ID on his phone? I already tried going to Settings>iTunes &App Store> and changing the Apple ID to his account email and that did not solve the problem. To make things worse, I recently changed my Apple ID email address (without getting a new ID) and I do not remember my old password (and this is the address that is popping up on his phone). He does not have any music on his phone and all of the Apps that he has are free. Any help you could offer would be great (-:
All apps are forever tied to the Apple ID that bought them. To stop your id from popping up, you need to delete the apps on his phone, and then repurchase them under his account.
Maybe you are looking for
-
HT204053 How do I change my iPhone iCloud account to match my iPad account
How to change my iCloud account to match my iPad account.
-
Hi All, I am generating the report output in ALV list and downloading in the PDF format. It is working fine. But I am not able to print last line(AS SOME TEXT) on each page of the report. I think the output of report in ALV LIST does not show the END
-
Computer crashed, need to load itunes from ipod onto new computer.
My hard drive on my pc crashed. I purchased a new computer and I need to transfer all my itunes from my ipod to my new laptop. When I try, a message tells me to erase my ipod and set up new account. I purchased alot of itunes other the past two years
-
Lenovo Y510 - Vista 32BIT to 7 64BIT Error message when installing software.
[IMG]http://i19.photobucket.com/albums/b159/Ishbar/Untitled-7.png[/IMG] This is the message I get forl ONE KEY RECOVERY software. Power2GO Dvd Software Shuttle Center Software Energy Management Software & Veriface Software. This model was bought thro
-
I have an IMac bought new in 2009. I have a Logitech ergonomic mouse M510 which I've had for a few months, with no problems. I have Mountain Lion OS X 10.8.4. A new problem just started happening today or yesterday. You know when you are typing somet