Easy-Photoprint Pro voor de Canon 9000 Pro printer

Ik installeerde onlangs Adobe CC ter vervanging van Photoshop C6 op een windows 8.1
Ik gebruik een Canon Pixma 9000 Pro voor het afdrukken van mijn foto's.
Hiervoor bestaat een plug-in namelijk Easy-Photoprint Pro.
Die heeft altijd feilloos gewerkt op mijn oude CS5-cersie en nog altijd op mijn CS6.
Maar voor de CC-versie werkt hij niet meer.
Ik heb de nieuwe software bij Adobe gedownload en geïnstalleerd maar dat helpt allemaal niet.
Na contact opgenomen te hebben met Canon zegt men dat het aan de CC ligt.
Ik wordt van "het kastje naar de muur" gestuurd.
Hebben jullie ervaring??
Mvg,
Marcel Martens

http://media.onecall.com/Image_Products/Canon/EPPP.pdf
http://software.canon-europe.com/software/0033490_0010722.asp?model
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg8220#D...
Hello again Learner. I am not directly using your equipment, but will throw out ieas until someone with more knowledge provides some input.
I attached a few links that might help. In addition I attached a screen shot from Print Studio Pro. Yours should be similar. Are you saying that your printer doesn't show up in the EPPP dropdown?
Are you able to print directly from Photoshop?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Similar Messages

  • We have an imac 27, with 2 accounts.  We share a Canon 9000 II printer, wired..  If my wife prints a photo it printes perfectly  When I print the same pic from my  account, overall dark magenta cast. Ideas????

    We have an iMac 27, wife and I each have an administrator account.  When she prints a pic from iphoto, or from  the web, the colors are perfect, they match the monitor.  When i print the same pic from my account, there is a dark magenta cast overall.  Same printer, same driver, same paper.  Using a Canon 9000series II printer, connected by wire.  This is a new phenomenon.  Using new inks, cartridges are full, all lit.  Any ideas what could be causing this weird phenomenon???

    When i print the same pic from my account, there is a dark magenta cast overall. 
    what happens when you print from your wives account?
    This is a new phenomenon. 
    When did this start, when you installed a new OS, applications, new Mac?
    A first step is to reset the printer from your account:
    Apple Menu > System Preferences > Printers: right click in the list of printers and select Reset Printing System

  • Canon Easy-photoprint fails to recognize iPhoto file for printing

    Recently upgraded to iphoto 8.1.1 but can't print photos due to Canon drivers unable to access iphoto files. Any ideas?
    Thanks

    How are you trying? Any of these?
    There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 and later*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and later* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    For users of 10.6 and later:
    You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and later:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Regards
    TD

  • Canon Pro 9000 good printer but garbage with Mac

    I have a canon 9000 pro printer, the interface for this printer with mac is just garbage.  No nice gui, I have to connect to http://127.0.0.1:631/.  Is there a way of setting the printer settings from the file/print options from the applications ?
    It is looking like I will have to keep a windows machine for printing photos etc where I want to easily change the printer settings.  Is there a way around this??
    If not what is a good A3 photo printer similar in resolution and quality to the canon that actually allows the user to use the printers full fucntionality from connected to a mac??

    Welcome to Apple Support Communities!
    The iMac PPC can't run 10.6.8.  So either you don't have 10.6.8, or you don't have an iMac PPC.  PowerPC is the nomenclature for all CPUs used on iMacs from 1998 through 2005.  First identify your operating system, then you can properly identify what driver you need to use.  My FAQ* here on printers may be of use*:
    http://www.macmaps.com/printersx.html
    Go to Apple menu (the blue Apple logo in the upper left) and click on About This Mac to determine what operating system you are running, and under More Info what iMac CPU you are using.  No need to repost.  Once you've properly identified your machine and operating system, I can ask a moderator to move your thread.

  • ATI Radeon 9000 Pro/ Layer heavy Photoshop project/

    When working on large Photoshop files, whenever I make any move or change, file window goes blank, layers disappear, all that's visible is underlying grid.
    Takes forever to do anything...
    Is this a video card problem? Or is it my monitor? If a vid card problem,
    what is a good replacement for ATI Radeon 9000 Pro?
    ATI Radeon 9000 Pro:
    Chipset Model: ATY,RV250
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 64 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4966
    Revision ID: 0x0001
    ROM Revision: 113-99702-127
    Monitor:
    L1975NW:
    Resolution: 1440 x 900 @ 60 Hz
    Depth: 32-bit Color
    Core Image: Software
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display Connector:
    Status: No display connected
    Thanks much!

    How clean is your Photoshop scratch disk? The scratch disk is an often overlooked cause of PS slowness. Ideally, your scratch disk should have an amount of contiguous free space equal to at least three times the size of the file you are working on.

  • Final Cut Pro with a ATI Radeon 9000 Pro

    I have an older Power Mac G4 that I have upgraded from 400Mhz to 1.4Ghz and a ATI Radeon 9000 Pro video card. I recently bought Final Cut Pro 2.0 and do not want to upgrade the video card yet again. Does anyone know of any work around to get Final Cut Pro to work on this computer?
    Details are as follows:
    Error message -
    The installed graphics card does not support the OpenGL features recommended by Final Cut Pro.
    ATI Radeon 9000 Pro:
    Chipset Model: ATY,RV250
    Type: Display
    Bus: AGP
    Slot: SLOT-A
    VRAM (Total): 64 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4966
    Revision ID: 0x0001
    ROM Revision: 113-99703-107
    Card # 109-99700-00
    Model ATY,RV250
    Vendor $1002 (4098)
    ROM ATY, Radeon9000i_A
    ROM# 133-99703-107
    FCode Version 1.87
    NDRV 1.1.0f53
    VRAM 64
    Any work around at all would be great. ATI told me to upgrade to 9600 AGP or 9800 AGP. I am not even sure the 9800 AGP will work on this vintage Power Mac.

    It looks like http://www.apple.com/finalcutstudio/specs.html you will be able to run the basic Final Cut Pro program but, obviously, its not going to scream. Many of the individual elements of the suite i.e. Motion, Color, are not going to function as they should without a significant boost in several things, memory, processor speed, video card.
    In all honesty, you should be running FCP 4.5 or 5.0 which will run very well with your hardware. But since you already have FCS2, (I assume that's what you mean, not really Final Cut 2) hang on to it for when you decide to do what all of us eventually will have to do; buy an Intel based box.
    My G5 is fast approaching obsolete, and I'm just waiting for the next version of Final Cut Suite to see how much box I need to go to. Didn't think this time 19 months ago I would be saying that... but time does roll on.
    You'll enjoy FCS2 (FCP6)

  • Compatibility with Canon Easy PhotoPrint Pro - Pixma Pro 9000

    Hi,
    I have just downloaded and installed the trial version of Photoshop CS5, only to discover that in the Automate (Under Files) option, Canon's Easy PhotoPrint Pro is no longer listed.
    I would be interested to know whether this is a Canon, or an Adobe problem
    I found that with Photoshop CS3, this method of printing, provided most accurate colours
    I would be interested in other subscribers, who print with the Canon Pixma Pro 9000, how they get best results from their printer - What options do you select in the print dialogue box, etc.
    Brian

    This sounds like a question about  general Photoshop CS5 use. This forum is specifically for people using the Photoshop CS5 FXG feature with Flash Catalyst.
    I recommend you post this question to one of  the more general Photoshop forums:
    http://forums.adobe.com/community/photoshop
    Your question will get much wider exposure there, and you are more likely to get an answer from the Photoshop community.

  • Photoshop CS6 - Problems with Canon Easy PhotoPrint Pro!

    Hi,
    I have been a user of Photoshop for years, starting with CS2, and upgrading regularly.
    Currently, I have Photoshop CS6, working on Windows 8, 64 bit! 
    With every version of PS, I have installed a Canon add in, called Easy Photoprint Pro.
    I have found that this provides the best colour match (monitor/Canon Pixma Pro 9000 printer).
    With CS 6, I find that as soon as I try and run Easy Photoprint, Photoshop stops working and closes down! (File >> Automate >> Easy PhotoPrint)
    I have down loaded both the latest versions of PS from Adobe com, and Easy Photoprint Pro, from Canon - The latter is claimed to be compatible with Windows 8 and Photoshop CS 6.
    I have tried disabling all other programs, at start up, and disabling all non Microsoft services; also disabling my Security suit!
    I would be interested in hearing if anyone has experience this problem, and has a solution

    The problem has been resolved, I think! For anyone interested,
    (1) I completely uninstalled all Adobe and Canon software and drivers!
    (2) I then deleted all Canon and Adobe folders on my C drive (Program Files & Program Files X 86).
    (3) I then ran REGEDIT and deleted All Canon and Adobe Keys!
    (4) I then ran CCleaner Registry cleaner!
    (5) I then Restarted my computer!
    (6) Finally, I reinstalled Photoshop (Updated on line); reinstalled Easy Photo Print and my Canon Printer Driver!
    THIS DID NOT RESOLVE THE ISSUE!
    I then repeated steps (1) to (5), but started my PC in SAFE MODE!
    I then repeated step (6); namely:I reinstalled Photoshop (Updated on line); reinstalled Easy Photo Print and my Canon Printer Driver!
    THIS APPEARS TO HAVE CLEARED THE PROBLEM

  • Is Canon PIXMA MG8220 supported by Easy-PhotoPrint Pro? Can several printer drives coexist?

    According to the Canon site, Easy-PhotoPrint Pro supports PIXMA MG8220, but when the former is automated from Photoshop CC in MacBook Pro it does not find any supported driver. Canon helpers do not answer this question flatly. Would any one know the answer for good? Then, I would like to know where to find which printer drivers are running in that computer, the matter being that I have installed, most certainly unwisely, several.
    Thanks for any answer

    http://media.onecall.com/Image_Products/Canon/EPPP.pdf
    http://software.canon-europe.com/software/0033490_0010722.asp?model
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg8220#D...
    Hello again Learner. I am not directly using your equipment, but will throw out ieas until someone with more knowledge provides some input.
    I attached a few links that might help. In addition I attached a screen shot from Print Studio Pro. Yours should be similar. Are you saying that your printer doesn't show up in the EPPP dropdown?
    Are you able to print directly from Photoshop?
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Printing Issuse From Lightroom 4 To Canon Pixma Pro 9000 MK II

    I have been trying to print from Lightroom 4 to a Canon Pixma Pro 9000 MK II.   Whenever I try to print via the front try (for canvas) I get an error message (code 1281) and I cannot print.   I have tried a few different papers as well as canvas and all of them give the same error code.
    I have also tried printing from Elements 9 with the same problem.
    I can print via the front try using Canon's own software, Easy Print Pro, but I cannot soft proof the image first and I cannot the the correct size of image either.
    Does anyone have any idea how I can get round this problem?
    I have spoken to Canon and they have passed the buck saying that as I can print using thier software it is an Adobe issue.
    Printer: Canon Pixma Pro 9000 MKII
    Software: Adobe Lightroom 4
    Operating System: Lion OSX

    The final answer was as per Rikk Flohr's instructions,
    Lightroom>Print Module
    Print Settings button Bottom Left-hand Panel
    Set the Center Pull-down to Quality and Media
    Paper Source: Front Tray
    I was having difficulty finding these previously, thanks Rikk.

  • Photoshop Elenents 13 does not recognize my Canon Pixma Pro Mark II 9000 printer.

    Photoshop Elements 13 does not recognize my Canon Pixma Pro Mark II 9000 printer.  I get the following error message “The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing” and I cannot print.

    I have been checking my computer files and find that PSE 13 is only the 32 bit system and my computer is a 64 bit system.  In PSE 12 I was able to take the Adobe
    Twain Driver (Twain 32 bit} in to the Optional Plug-in folder and then my Canon Scanner would work with PSE 12.  My printer Canon Pixma Mark II 9000 worked with PSE 12.  Now that I have upgraded to PSE 13 neither the scanner or my printer will work.  There I no “Optional Plug-in Folder” in PSE 13.  Is there some way that I can drag files into PSE 13 that will enable both my scanner and printer to work?  My scanner is a Canon Canoscan 8800.
    Or must I go back to using PSE 12.
    Robbie

  • How to print from Lightroom 5 to Canon Pixma pro-100?

    Using Lightrooms printmodule with this printer is a big problem for me. Using Cannon Print studio Works, but then you
    loose a lot of great functionallity in LR print module.
    It seems that when I make a preset or set up printer with correct ICC profile the canon printer driver automatically resets to its own default.
    It looks like a print driver in the background resets everything i do. Very confusing and Canon support points to adobe.
    My setup:
    Macpro with  OSX 10.9.2  (latest version)
    Lightroom 5.3 (creative cloud member, always latest version)
    Canon Pixma pro-100 (bought new april 2014)
    I have looked several places on internett and it looks that there are a lot people having similar problems.
    I would appriciate any help to find an easy setup/soltion !
    Thanks in advance
    Nicolaas

    I have the Pixma Pro-100. But I'm using Windows 7, so I'm afraid I can't be a lot of help to you. I tried to help someone in another forum the other day and showed some screenshots, but he said he didn't have anything like that on the Mac.
    If you're going to use ICC profiles, you have to turn off color management either in the printer or in the printer driver. It doesn't matter which one, just make sure that it gets turned off. Then what I do is I use soft proofing with the appropriate paper profile to prepare a soft proof copy for printing. After I have set my printer settings the way I want them and have everything just right in Lightroom, I save the preset for printing. And it seems to keep what I have set. If you can show me some screenshots of your printer driver, perhaps I can be of assistance.
    Regardless of whether I allow Lightroom to manage the color or allow the printer to manage it, I am getting really nice prints. So I'm sure there's something that you are probably just overlooking.

  • Snow leopard and Canon pixma pro drivers, which one is it recognizing?

    I have a new MacBook Pro. I print with Canon Pixma Pro 9000 and 9500.
    My question is regarding the print drivers.
    I plug both Pixma pros in and the computer recognizes them.
    However, I also downloaded the latest print drivers for the two print drivers off the Canon website.
    Which printer driver is the computer using? The one that somehow comes with the computer or the one I downloaded from Canon.
    Or does it matter? My concern is that I want the paper profiles to be correct.

    JN London wrote:
    Can anyone positivly confirm that they have got this printer to work with 10.5.6? I have downlaosed latest drivers from Canon and Apple (on the apple list is says Canon Pro9000 Series II but omits the word PIXMA - and when I get this into the PRINT USING box on add printer and hit 'Add' nothing happens.
    We have the Pro 9500 II that we use for proofing and I've got it on a 10.6.5 Mac and it's using the v10.36.2.0 driver that it downloaded from Apple when I connected it.
    If your Mac does not see or let you add the printer after manually browsing to it then something is amiss with your Mac. I suggest you try a reset of the printing system using the following procedure.
    1. Unplug the Pro9000 USB cable from the Mac
    2. Open System Preferences > Print & Fax
    3. Move your mouse over the Printers list
    4. Hold down the Control button and click the mouse
    5. Click the "Reset printing system ..." popup
    6. Restart your Mac
    7. Reconnect the Pro9000 USB cable to the Mac
    The Mac should automatically add the printer to the Print & Fax pane, assuming the printer is being seen by the Mac - and you are definitely connecting the USB cable of the Pro9000 directly to the Mac.
    If the Mac does not add the printer automatically then open System Profiler (Applications > Utilities) and select the USB entry under Hardware in the left pane. The right pane will then show all the USB busses on the Mac. The printer should be shown connected to one of these busses. If it is not shown then try another USB cable and another USB socket on the Mac.

  • Is it possible to live capture into Premiere Pro using a Canon 1DX DSLR?

    Hello,
    We are trying to avoid capturing into the canon capture software, exporting, then importing back into Premiere Pro for editing. Is it possible just to capture directly into Premiere Pro using a Canon 1DX DSLR?
    Thank you in advance for your help.
    Amanda

    I have got FCE HD which I assume works in a similar way.
    Go to Easy Setup and select "DV - PAL DV Converter".
    When you have finished remember to return it to its original setting.
    Ian.

  • Any ideas how to fix my mac book pro to canon pixma mp640 printer connection?

    Anyone have any ideas how to fix my mac book pro to canon pimxa mp640 printer link? The two are connected manually yet the ! remains on the 'print' page next to the printer name. it was working fine until i changed the ink cartridges. Without the wireless password - which I've never had and don't supposedly need as it's not a wireless connection, I am being prevented from resuming printing.

    If it's on a windows network you have to enter your (windows) log in (name/password) credentials.
    This should be a 1 time event. It will remember it thereafter.

Maybe you are looking for