Easy points for someone!

Mail always defaults to the same email account when composing "New" email, even tho I have highlighted a different account. I know there is a preference for this somewhere. Thanks.

Hi Peter: Have you checked out the settings within mail preferences? Go to Mail > Preferences > Composing. Mid way down on this box is the setting for which email address to default to, select the required one from there. Sorry if this is redundant information.
Good Luck
Stedman

Similar Messages

Easy one for someone, I hope

This is probably an easy one for someone:
I have a simple password function in a child movie and am
using the standard code to activate the enter key
on (release, keyPress "<Enter>") {
It works fine on it's own, but doesn't work when it's loaded
into the parent movie. What's the solution?
Simonster

create a submit button that works the same as the keypress
Dan Mode
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
"Simonster" <[email protected]> wrote in
message
news:e940j1$a8o$[email protected]..
> This is probably an easy one for someone:
> I have a simple password function in a child movie and
am using the
> standard
> code to activate the enter key
>
> on (release, keyPress "<Enter>") {
>
> It works fine on it's own, but doesn't work when it's
loaded into the
> parent
> movie. What's the solution?
>
> Simonster
>

Personal domain.... easy question for someone who has done it.. easy points

If i forward my www.vegasablaze.com to mobile me from go daddy and set up the personal domain in my mobile me account will my address bar read http://www.vegasablaze.com or will it read my mobile me site address? ie http://web.me.com/example/Site/Welcome.html? See once i posted my site to godaddy i lost my blog ability. But I dont want people to se my mobile me address. So I would like to forward to personal domain. but am afraid if it goes to my mobile me it would look unprofessional..

Personal Domain replaces the web.me.com/username part of the URL with the domain name, with the subsequent folder and filenames on the end, so that to take your example of
http://web.me.com/example/Site/Welcome.html
people entering http://domainname.com
would be taken to the welcome page and the URL showing will be
http://domainname.com/Site/Welcome.html
However note that when you do this the original web.me.com URL still works and is searchable by Google. Though casual visitors to your domain won't see the real URL, it's not difficult to find it.

Easy Points for the Quickest Poster

Worlds dumbest question, I'm sure, but for the life of me I can't figure this out:
Video_TS folder .... does DVDSP automatically create one for every project or do I have to export one? I can't find a button to create one and all I see on my hard drive is the project file and MPEG folder.
PowerMAC G4 Mac OS X (10.4.2)

Just 1... I'm feeling stingy today
Ahhhh... My toolbar was shortened and I never clicked the arrow to reveal the rest! I knew it was a silly thing like that.
Thanks

Easy points for ya........

I need to download the NWDS for j2ee engine 6.40 SP11.
There are three files on the service.sap.com website.
<b>000001    51030277_4 NW Developer Studio
000002    51030724_15 NW04 SR1 SAP NW DEVELOPER STUDIO 2.0
000003    51030924_4 NW04 SR1 SAP NW DEVELOPER STUDIO 2.0</b>
Anyone know which one is the SP11 version of NWDS.
Regards,
Rich Heilman

Hi
   This should be SAR file that you should download.
JIDE11_0-10002804.SAR (NWDS for SP11)
Service.sap.com has slightly changed since my last visit and now the page looks different. I dont know how you have navigated.
So just go to http://service.sap.com/patches
Select SP stack download and in the links that appear select "SAP Netweaver '04".
In the next screen just select the checkbox for Development and click next.
Then select your Operating system. For eg if your OS is NT then select NT/i386.
That should be able to guide you. Let me know if you require some more information.
I dont know which path u have navigated to. Let me know the path if this doesnt help you.
regards
ravi

Easy question for someone...I hope

I have an Edirol FA-66 interface. It's connected through fire wire to GB, GB recognizes this yet no levels come through a basic track...any thoughts?

Nevermind...

I need help--get easy points for this one!

my video will not finish downloading...it has stopped. please answer a reply... i really need help! i purchased a t.v. episode from the iTunes store and it has stopped downloading...but it has downloading partially, just not completely. please help!

on itunes. it is downloading on itunes...or at least it was. but its stopped.

Making it easier to award points for individual answers on the same slide.

Hi
One of my biggest requests would be for it to be made a lot easier to award points for individual answers.
For example: I would like to use the 'fill in the blanks' quiz to create something that is reffered to in educational circles as 'cloze procedure'. Basically I would like to create an entire slide of text with many blank areas that need to be filled in. This is possible at the moment but it is only possible to award points based on every single answer being correct. I would like to award individual points for each correct answer on the slide.
At the moment this can be done with a lot of complex scripting but I would like to be able to do it at the push of a button.
Cheers

Here is the link:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
You can also find it in the main screen of the Captivate forums. That is the way to log a feature request. In the new forum, you can also post Ideas, but the feature requests do reach the team certainly:
http://captivate.adobe.com/captivate/ideas/popular
Lilybiri

Price list (10 easy points :)

hi guys
can someone tell me how to set the price of an item for a certain price list through DIAPI?
say the list is "list 1" and price 100u20AC...

First of all, please do not post anything like easy points or alike. Check the forum rules for details.
What I don't understand is: if I am correct you are a normal user from SDK forum and this question is apparently belongs to SDK. Why do you post is here? Do you want to DTW the price list?
Thanks,
Gordon

How can you print something from icloud? I'd like to print a copy of my schedule for someone from the calendar, but print is disabled. Going around that, the pages in the preview are blank.

So far I am only seeing the possibility of being able to print my schedule from my computer at home in iCal.
It doesn't seem possible to save it as a PDF since the pages appear blank on the print preview. Is this just the broswer I am using, or is printing really not possible? I could share it to "anyone" (since this person doesn't have iCloud), but to be honest I don't feel very comfortable with having something like that "open" on the web. Even though it's only through that specific link, it still would exist out there for someone to potentially stumble onto it.
Any ideas, or is it just not possible to do this?

Welcome to the Apple Community.
A bit of a pain, but you'll need to take a screenshot and print that, Skitch makes taking such screenshots much easier if you are interested.

HT201209 how can I buy an iTunes gift certificate for someone living in Colombia?

How do I buy an iTunes gift certificate from US iTunes for someone who lives in Colombia? The fine print on the gift certificate page says it can only be redeemed in a US iTunes store.
Is this true? And if so is there a work around?

OK, I see what point you were trying to make previously. You are talking about the misspelling of the name. That was SO not clear in your post. As you can tell, both roamminggnome and I missed your intent.
If you want to educate people on the common misspelling of the country Colombia, then state your case clearly. You will get a lot further that way. Being condescending about the mistake is not productive, and you won't achieve your goal that way.
That having been said, it seems a bit pointless to bring up a two year old post that has a spelling error in it and then post to it only to call out that error.
This is not an English course - it is a technical user to user forum. We have to put up with egregious spelling errors daily on this site. It is not the place to start a campaign on the proper spelling of the country Colombia. You might want to try to direct that considerable indignation somewhere where it will actually make a difference.
Sorry for the misspelling in my post of the country. I can promise you, I won't make that mistake again.
Cheers,
GB

How to determine the mount point for directory /tmp ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.

I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

HT4060 Is it normal for someone to have general diffuculty charging an ipad? I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly. It just seems to be exceedingly f

Is it normal for someone to have general diffuculty charging an ipad? I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly. It is normal for me to plug it in overnight and to see no charge whatsoever the next day. I have never had so much trouble using a friggin charger in my life. It just seems to be exceedingly finicky. What am I missing?

Charging your iPad should not be problematic. It should be an easy thing to do using the charger provided with your iPad connected to a known good wall outlet.
The charging problem you are experiencing is most like caused by:
1. A faulty charger
2. A faulty cable
3. A bad wall outlet
4. A problem in the iPad.
The first three of these are easiest to eliminate. Try a for ends charger and cable. Make absolutely sure your outlet is good. Try other outlets.
If the charger, cable and outlet a proven to be good then the problem lies in the iPad.
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

3X points for LG washer and dryer is false advertisement-- 5 months later I am still waiting

I have tried multiple attempts (at least 3 calls) to Best Buy service and have yet to get my issue resolved. I made anLG purchase of a washer and dryer on Octobe 6th 2014. The add said get 3x points so that made my final decision to purchase from Best Buy. 5 months later I have yet to get my 3X points. This is false advertisement. In all three of my calls the representative has apologized and opens up a case. I never hear anything back. I keep being told I got my 20% incremental points but that is not what I am disputing. The last time the represenatative gave me some points for my frustration but said someone would get back to me and that was back in December. Its frustrating as I really like shoping at Best Buy but am becoming very annoyed and really do not want to purcahse here anymore if Best Buy does not follow through with their advertisements. I do not have a copy of the ad (wish I would of kept one) but Best Buy should be able to verify all their ads. I certainly am not making this up. As a matter of fact, the salesperson at the store looked at the ad and confirmed that I should be getting 3X points for the purchase. Since I have tried multiple attempts on the phone with no success then perhaps this message might work better. I would discourage anyone right now in believing any of there reward ads. My time is worth more than trying to chase Best Buy down for points I am owed and will begin to make my purschases elsewhere. BEWARE customers as I am a very dissatisified customer at the moment.

Hi analydia,
Thank you for taking the time to sign up for the forum and connect with us. I can understand why it is you would feel frustrated, and I 100% agree that you should not have to chase down any points that you may have qualified for. To hear that you have potentially been waiting 5 months for points to post to your My Best Buy account, it is just really disappointing.
It will generally take 20 to 35 days for points to post to a member's account for a Magnolia or Pacific Sales purchase, which will start after any scheduled deliveries are completed. I looked over your account using the email address you registered with the forum and I do see that the base points for your Pacific Sales purchase have already posted. With that being said, it should just be a matter of confirming 3X points was being offered and whether or not your purchase qualified. It appears that your LG washer and dryer may have been eligible for 5X points, but it depends on which models you purchased.
I am very sorry for any inconvenience you have experienced up until now, and I would like to see what I can possibly do to further assist. To gather some additional information and go over your My Best Buy account with you, I will be sending you a private message. You can check your private messages by logging into the forum and clicking on the little yellow envelope located at the top of the page.
I hope you have a wonderful day!
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Looking for someone on x86_64 to test a snippet of C#

I'm having trouble getting a piece of C# code to work. It's 100% correct and was found working by two users running x86, however on my x86_64 it doesn't.
It should display an icon in the notification area ('system tray'). For me it won't show the icon in gnome, but neither in openbox + trayer. The other two x86(!) users tested in on Gnome as well, and did get the icon to show up.
I'm looking for someone else on x86_64 to test this code, to eliminate (or confirm) that it's a very obscure x86_64 bug. Make sure you're fully synched up - that is Mono 1.9.1, with (preferably) Gnome 2.22.3 (but if it won't work on KDE/Xfce/anything else that pretty much identifies the problem as well).
You can find the 20-line snippet at http://pastebin.com/m4ebdcba6 (save as Test.cs)
Compiling is easy, `mcs -r:System.Drawing,System.Windows.Forms Test.cs` should do the trick, followed by `mono Test.exe`. You will get a messagebox, and at that time it *should* display the icon.
Thanks.

I have Arch64 on Intel Core2Duo, with [testing] repository enabled.
I use KDE 3.5.9. I could try it with KDE 4-svn later as well
Mono version: extra/mono-1.9.1-1
I tried that file and when I disable autohiding of my panel, it works correctly:
http://img389.imageshack.us/img389/5647/screen1lf1.png
If I hide the panel manually (by using the hide button on the right), and I show it again, the icon disappears, but the space is still occupied:
http://img519.imageshack.us/img519/473/screen3on2.png
When I have auto-hiding disabled, it appears fine (just like in the first picture), but when the panel hides and appears again I get black rectangle:
http://img242.imageshack.us/img242/3091/screen2ye7.png
The first time I tried it, the rectangle was white instead
Last edited by tanis (2008-07-15 16:16:06)

Easy points for someone!

Similar Messages

Maybe you are looking for