Easy Points for the Quickest Poster

Worlds dumbest question, I'm sure, but for the life of me I can't figure this out:
Video_TS folder .... does DVDSP automatically create one for every project or do I have to export one? I can't find a button to create one and all I see on my hard drive is the project file and MPEG folder.
PowerMAC G4   Mac OS X (10.4.2)  

Just 1... I'm feeling stingy today
Ahhhh... My toolbar was shortened and I never clicked the arrow to reveal the rest! I knew it was a silly thing like that.
Thanks

Similar Messages

  • Points for the blog created in September 2013

    Hello there
    I posted a blog in September 2013. I do not see the points awarded for it. I did check the profile settings to earn the badge and one of them does state that you need to post a blog, which I already did.
    Kindly do the needful!
    The link to the blog is as follows:
    How to Ensure that BPC Displays Only Uploaded Records for Planning
    Regards
    Gajendra

    Hi Gajendra,
    You posted your blog as personal blog. So no points assigned.
    If you post technical docs/blogs at related forums then only you will get points.
    No points for personal blogs/docs.
    If you posted at BPC 10 NW forum. you may get points for the same. at below forum you need to choose create blog or doc.
    SAP Planning and Consolidation, version for SAP NetWeaver
    Thanks

  • Sorry for the multiple posts.

    I cant delete them as there seems to be no option.
    I was pressing the post and it was giving me error but it seems like it was actually working ok, hence the multiple posts.

    rhuhman wrote:
    >
    > Sorry for the multiple posts... I am trying to find the Auto-Reboot
    > default options. I would like to change the defaults to a set
    > parameter. I am looking at adding a signature to the pop-up message
    > and extending the sleep time from 2 hours to 10 hours. I thought it
    > was attached to the baseline setting but that didn't change anything.
    >
    > Can this be changed?
    >
    > Richard
    Hi
    I've been looking for this myself but can't seem to find what you are
    looking for - which is kind of a problem since it would make it a lot
    easier to deploy patches if you did not need to go in and set these
    options on every deployment.
    Niels
    A true red devil...

  • SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

    I have a simple column chart grouping on 1 value on the category axis.  For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis.  I right click on the data series and choose "Add calculated series...".  I choose moving average.  I want to move the average over at least 2 periods.
    When I run the report, I get the error "Formula error - there are not enough data points for the period".  The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5).  When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
    I don't think this is entirely acceptable for our end users.  At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart.  Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
    Thank you,
    Dan

    I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
    If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
    <ChartFormulaParameter Name="Period">
                      <Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
    </ChartFormulaParameter>
    What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
    A side note:
    If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

  • HT4539 I sign up for the racing post app each month but didnt print past invoices off and now cant find them anywhere and need them for my books how do i find them

    I sign up for the racing post app each month but didnt print past invoices off and now cant find them anywhere and need them for my books how do i find them

    If you wish to submit comments to Apple, the best way is to use their feedback pages.
    http://www.apple.com/feedback/itunesapp.html
    It's not likely that anyone from Apple will see your comments here among the thousands of other posts.
    Regards.

  • Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

    Can I use the Ethernet Port  of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
    I have AE 5th gen
    looking to buy (from ebay) the AEX A1264
    Various computers, printers and hubs for the network
    Is this possible to do?

    Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
    Thanks Again.

  • Break point for the particular user

    Anybody knows how to set up a break point for the particular user on a particular statement. So I can see this breakpoint on my screen when it happened?

    Hi,
    If the user ID is USERA then set a breakpoint for USERA as :
    BREAK USERA.
    Cheers,
    Aditya

  • Values for the automatic posting items are invalid

    Hi,
    I'm doing two kinds of consolidations, both using its own Special Versions. IFRS and Local Accounting system (Portugal)
    In IFRS the system it is working fine.
    Although when I try to consolidate in Local Accounting, I have errors.
    The customizing of the two special versions only differ in the consolidation of investments. In Local Accounting I have a different account in Net Income Prior to First Consolidation(Appropriation of retained earnings) and in Net Income Item of Statistical Net Income (Selected Items).
    After doing this customizing, I tried the Consolidation of investments, and after executing the measure I have the following error "Values for the automatic posting items are invalid".
    I can see the document that system is trying to post and everything seems fine. I only noticed that the statistical items are apeearing, which is not normal.
    Do you what I'm missing or doing wrong?
    I'm new to BCS.
    Thanks in advance.
    João Arvanas

    The message is most likely regarding the posting to the Retained Earnings item defined in Selected Items. I've seen this before and do not recall the specific solution but it entailed using a different item for this.
    It may be that the COI setting for displaying the statistical items in the log is version-dependent. If so it may be turned off. I think this is in location of values.

  • How to increase Decimal Points for the BOM Component Quantity

    Hi All,
    While creating BOM:
    Can anyone help me to know how i can increase the Decimal points for the BOM components quantity.
    I can able to give only upto 3 decimal points, but the requirement is more than that.
    I have increased the Decimal point value to 5 in transaction Code CUNI. but still it is allowing me to enter only upto three decimal places.
    Thanks and Regards
    Khadeer

    Khadeer,
    You would be better off changing the base quantity of the parent part.  Instead of "1 EA  parent contains .00003MG of  component" you could say "100 EA parents contain .003MG of component".
    Alternately, you could use different units of measure for your parent or component parts, which would be more suitable for the 3 place decimal limitation.
    I agree with Anil in that if you elect to change the decimals from standard, you could end up with huge changes that will propagate through every module in the ERP.  In my view, there is no need of this kind of headache.
    Best Regards,
    DB49

  • Looking for a good starting point for the HR module

    Hello,
    Can someone please send links to help/blogs which will be a good starting point for the HR module?
    Thanks,
    Roy

    Regarding Payroll configuration
    https://forums.sdn.sap.com/click.jspa?searchID=8283334&messageID=4763364
    follow wht our gurus has said

  • What's the best point for inserting a "post rendering" FX?

    Hi, I extended a Canvas3D and then I override the method "postSwap()", but my odd-even line effect is flickering a lot, what could be another good point for inserting this process?
    public void postSwap() {
        Graphics2D g2 = (Graphics2D)this.getGraphics();
        Map map = new HashMap();
        map.put(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_OFF);
        g2.addRenderingHints(map);
        g2.setColor(WipideaApplet.BCK2);
        int h = this.getHeight(), w = this.getWidth();
        for (int i=0;i<h;i++) {
            if (i%2==0)
                g2.drawLine(0, i, w, i);
    }

    postRendering()?
    works for me and does not flick... i draw an image on it, so i guess it should work for you

  • Easy Way for the Coach to post Team Standings without involving Webmaster?

    I'm doing a website for a small school using iWeb and it will be posted to Network Solutions, where the school's domain is hosted. The sports coach wants to update the team standings for 6 or 8 teams immediately after every game. I don't want to personally have to republish the site every time for him. What can I use that he can access from his PC, update it and then it will update the website for that? For instance, we use the Google Calendar html snippet to allow him to post the game dates & times & change them at will (without involving me). I was thinking of some sort of blogging-commenting thing, but using for what is essentially a list, but I'm not very blog-familiar. C'mon geniuses, I need your help!
    -Linda

    it looks like i'd have to create an account for each sport with wordpress to perhaps add an updatable gravatar widget. might be too much for the coach...

  • Require to select atleast 1 point for the question to Publish the CBT

    Hi,
    I am using Adobe Captivate 4.0 version. I have made my CBT AICC compliant to upload to an LMS System.
    In my CBT I have Multiple Choice Questions to test the understanding while taking the training and they are NOT required for posting credit to the LMS System.
    Therefore, I have assigned 0 points to individual questions and unchecked "Report Answers" checkbox.
    However, the publishing bar hangs and I am unable to complete publishing the project.
    Alternatively, if i select 1 point also for only 1 question in the project, the project is able to complete publishing.
    What is the reason for it? Is there a workaround where I can assign 0 points to all questions so that I do not face issue in the LMS system.
    Thanks!

    Hi,
    I can explain how an rework order is created with
    reference op set.
    First check in Tcode OPJF for the selection id a
    Priority is defined for the Task list type S
    with usage 1 and status 4 and then Proceed as
    follows.
    1. First create a Reference op set in tcode Ca11.
    Enter the plant,Description , usage and status
    for the ref op set
    Enter lotsize and unit of measure.
    Enter the op as 0010 / workcenter/op control
    key/Description for the op
    Enter the standard values and save.
    2. Create a Standard trigger point in CO31.(Ex
    Production)
    Enter the Trigger Point usage /Group as FERT.
    3.Tick the Trigger Point Functions.
    4. Enable the indicator create order with Reference .
    5.Enter the system status as PCNF.
    6. Enter change as +.
    7. Enable the indicator once.
    8 . Now place the cursor on the create order with reference.
    9. Goto Parameters.
    10. In the Parameter enter in the group the created Reference op set group no.
    11. Order type as PP01 and group counter as 1 and save the Trigger Point.
    12. Now goto the Routing for your Material.
    13. Choose the last op to assign the Trigger point.
    14 .Select the OP -
    > Goto ---> Trigger Point overview.
    15. Enter the Trigger Point usage as FERT.
    16.Now choose that line ,select the Details---> Trigger Point
    17. The system will says standard trigger point exists from which you can
    select the created Trigger Point (EXx Production)and save.
    18. MD02/MD04.
    19. Convert the Planned Order into Production Order and Release the order.
    20 .Now confirm th ops.
    21. For the last op enter the yield and rework qty
    and set the status as PCNF.
    22. If the status of last op is PCNF then in the
    system a POP UP will appear as Activited by
    Trigger Point /Create order with reference/order
    number/sequence and op number which trigger point
    works and enter.
    22. Now a rework order will be created.
    23. In c003 enter the number which is next to the actual prodn order no.Rework
    order will be seen.
    Regards,
    nandha

  • Easy Reject for the Nokia 5800

    Does anyone know where to buy the Easy Reject software for Symbian Version 5 for the Nokia 5800?...I have used it on my Nokia N95 8 Gb without any problems but thats for the Symbian Version 3 OS....

    /discussions/board/message?board.id=apps&message.i​d=10822#M10822
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • I am trying to enter a split point for a file going on a dual layer disc. There are chapter markers in the file but the automtic function doesn't see them. Can I insert a point for the layer split in DVD Studio Pro 3 or 4? It doesn't appear that the autom

    I am trying to enter a split point for a file going on a dual layer disc. There are chapter markers in the file but auto function does not see them. Went back and put a small split in the timeline in fcp and exported to mpeg 2 again and auto function does not see that either? Manual msays to manualy enter split poind in DVDSP but can't find any way to enter that split point in DVDSP? How can I manualy enter a split point in DVDSP 3 or 4?
    Elizabeth/Roger Cook Films

    This is definitely not the behavior I see.  When I left click it adds a marker,
    When I right click, I see the following
    Do you have any OS hacks installed on your computer or have you changed the mouse behavior in system preferences:  mouse?  If not, I'd suggest you run digital rebellions preference manager and reset your dvdsp preferences. 
    https://discussions.apple.com/docs/DOC-2491

Maybe you are looking for