Easy Question! How Do I Play ONLY the Selection, and then playback stops?

How Do I Play ONLY the Selection, and then playback stops? (Same as subject..)
Thanks! I'm loving STP so far. I came from Sony Sound Forge so it's been difficult finding something that can compare, but I think I have it now! Lot's of advantages for STP too.

I think you're confusing the audio loops with MIDI loops. The blue loops are audio loops which will play only on audio tracks. You can't 'play' those with a keyboard because they are actual audio files. The green loops contain MIDI data that corresponds with a software instrument, and if you drop them onto a Software Instrument track, they will open that instrument which you CAN play with an external keyboard or the caps lock keyboard.
I might be missing some loops, but when I searched for Bell Tower I found only one, and it is a blue loop. So it can only be played as an audio loop on an audio track. However, if it were a green loop, you would NOT drop it on an external MIDI track (I think that's what you're trying to do if you're dragging it onto the 'Grand Piano MIDI instrument'), but you would create a SOFTWARE INSTRUMENT track, and drag it on that. Any internal sounds you want to play from Logic's instrument you'll do from Software Instrument tracks, and not MIDI tracks.
What you should do to find a good chime sound that you can play with the caps lock keyboard is to create a Software Instrument Track, open the Library tab, and search there for a good chime. This will search all of the instruments and presets that Logic has for all of its internal instruments. Try 'Tubular Bells' and see if that works for you.
If you need to use the bells from that loop, do what SC suggested, and take the hits from the audio file and load them into a sampler. Then you can play them the way you want to. If you don't know how to make a sampler, it's a bit complicated. Look up EXS24 in the manual, or check out
http://www.youtube.com/user/SFLogicNinja
I think he has a video or two on EXS24

Similar Messages

Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

If you uncheck all of the songs, they will only play if explicitly commanded. Command-click in a checkbox and they will all be unchecked. Command-clicking again will check the all again should you want to do that.

HT4352 my aptv2 turns on homesharing when I launch a movie it plays for a while and then it stops and remove my libary

my aptv2 turns on homesharing when I launch a movie it plays for a while and then it stops and remove my libary from where it should show my playlist any sugestion. it was wifif thoufgt it might be that so i tried ethernet wired and does the same any suggestions my connection is up when it shuts down

Did you restore to factory defaults/new iPod and sync stuff to your iPod? If you restore from backup there may be some corruption that is now in the backup.

How can I save ONLY the bookmarks and extensions

I am about to do a clean reinstall of Firefox. I want to save ONLY the Bookmarks and Extensions and NOTHING ELSE from the Firefox Profile. How can I do this please?
Thank you,

Both answers combined to help solve the problem. It would be good if more than one answer can be selected as "Chosen Solutions", because this situation occurs often in forums.
Thank you to both of you!
Kind regards.

When sending e-mails, how can I show only the name and not include the e-mail address?

When sending e-mails, how can I show only the name of the recipient and not include their full e-mail address?

Hi beverlyfromnull,
Have you added the recipients to your address book?

How do you play a Flash video and then close the player?

I have a splash page that plays a .swf. At the end of the
video the home.html page is opened. As/after the home page launches
I want to play a Flash video and then have the player close.
I am willing to trade wife, children or beagles for the info.

Are these two separate browser windows? One for the Flash
.swf and a different window for the home.html document? Is this
correct:
1. show .swf in one window,
2. open new, second, window with home.html
3. show second .swf in first window
4. close first window when second .swf finishes
If this is the scenario, then no, you can't reliably close
the first window. You can use Javascript to close a browser window,
but, if that window wasn't opened using Javascript, then it may not
close gracefully, or in the case of IE, may display a prominent
error message.

I ran the update and then firefox stopped working completely ggot a message about .dll that won't work with windows. tried toreinstall new copy of latest but they won't.

I just ran the update to .4 as the dialog box said to. Now firefox won't work at all. Nothing happens I get a message about a .dll file that is incompatible. Tried to doanload a new copy but that doesn't get any further starting to extract files then it fails to finish. Any thing I can do or have I lost evrery thing including my bookmarked sites?
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SIMBAR={7B37EC33-AF75-48D2-9930-4E9EF2ABA545}; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

Thank you,
Morbus! It worked like you said. Anyway I think the problem starts with maybe needing to completely clean up my OS and drives as they keep "filling up" real fast - much faster than my usage. Uninstall wouldn't work so I just oened up programs and fond the .exe and then deleted it. Scary moment as I really have seen others so mess up everything doing this but download went well of new copy and yes I have all my bookmarks and settings. YAYS!! so thank you again. Also running so much faster and no glitches like tabs not working th way they should. In end I think I need to get an upgrade from Vista home basic. and just then add my files one at a time to see how all goes.

Using a Mac Pro, how do I play only one playlist and use shuffle?

How do I play a specific playlist in itunes and use shuffle?

Go to the playlist. You'll see the intersected lines (shown below). Click on that and press play.

Is there a way to make the audio play continuously so that the same song play during the intro and slideshows without stopping and restarting?

Recently returned from vacation and wish to make a dcd slidshow with the same music all the way through without it stopping and starting with each new event slideshow. Can this be done?

No.
OT

I got my iphone 5 Last christmas, all seem to be well then it started connecting a disconecting from the charger and then suddenly stopped so i bought a new charger, it would for a bit then stopped working again whats wrong?

I Got my iphone 5 last christmas, and then a couple of months after the charger started to conect and disconect, i thought at first it was just the cord so i bought a new one but then it happened again, from this day i have bought 6 iphone 5 chargers and now my 7th and its rarely working whats wrong? and also my sleep wake button isnt working properly? PLEASe HELP !

If you are getting Siri when you double tap, then your home button must be sticking. Siri comes up when you hold the home button. Try tapping quickly twice. When that happens, the multi-tasking list comes up and you will see the app icon and then a thumbnail, or reduced size view of the app above it. You put your finger on that thumbnail and swipe upwards with your finger.
For that issue, you might want to do a reset of the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. This will not affect your data.
To be honest, your novel is a little difficult to read, and I think you put too much information in there, and a lot of it is unnecessary. Be to the point and just add information necessary to understand the issue.

How can i get only the headings and their subheadings from word file in C#

I want to get all the headings along their sub-headings separately from a word file programmatically Using c# for example i have following content :
HEADING 1 XYZ
heading 2
heading 3
HEADING 1 ABC
HEADING 1 DEF
heading 2 lorem ispum
so my code should return me:
Heading 1 XYZ
heading 2
heading 3
seperately and similarly remaining headings and subheadings also.
Bilal Amjad Microsoft Certified Professional

Did you try to use OpenXml SDK to access word *.docx file in .Net?
Use OpenXml SDK you could easily to get anything in Word (Office) documents.
Bob Bao
Do you still use the same Windows 8 LockScreen always? Download Chameleon Win8 App quickly, that changes your LockScreen constantly.
你是否还在看着一成不变的Windows 8锁屏而烦恼，赶紧下载这个
百变锁屏
应用，让你的锁屏不断地变化起来。
i am using the following code to get the output but it returns me all he headings and subheading together not separately
foreach (Microsoft.Office.Interop.Word.Paragraph paragraph in oMyDoc.Paragraphs )
Microsoft.Office.Interop.Word.Style style = paragraph.get_Style() as Microsoft.Office.Interop.Word.Style;
string styleName = style.NameLocal;
string text = paragraph.Range.Text;
if (styleName == "Title")
title = text.ToString();
else if (styleName == "Subtitle")
st = text.ToString() + "\n";
else if (styleName=="Heading 1")
heading1[h1c] = text.ToString()+"\n";
Bilal Amjad Microsoft Certified Professional

I changed internet providers and now my rental movies will not play. The pause and then fastforward by themselves every 20 sec. Please help.

I recently switched from att to my local cable company for internet service. After I did, I can no longer play my rented movies. They skip and pause every 20 sec. or so. I have windows. Does anyone know how to fix?

same sentiment of mine...
my vids wont playu no more.. they're just stored in my music files..
i want them all back!!
pls help!!

HT4718 How do I just download the Lion and then create a bootdrive to recover from? Where can I download the installer file?

I'm in Indonesia and my connection is unreliable, I don't want to get halfway through an internet recovery and it go wrong leaving with half an OS install.
Also - when I install, either by bootdrive or recovery, will it leave my partitioned hard drive data without formatting it?

Backup your data before you do anything:
https://discussions.apple.com/docs/DOC-1992
Shut down, and disconnect the backup after shutting down.
Reboot with command-R. If it does not bring about the installer, your Mac may be able to get a firmware to allow command-R to bring about the installer:
http://support.apple.com/kb/HT4904
If that doesn't let you install it, go to here:
http://store.apple.com/id/product/D6106Z/A/os-x-lion
If you have purchased it already, and want to try again because the download failed, communicate with the App Store billing:
http://www.apple.com/support/mac/app-store/contact.html?form=account&topic=MacAp pStoreAccountandBilling
Before running the installer, but after the download completes, a file called InstallESD.DMG will be on your computer. This file contains a virtual installer disk you can keep for future use on a USB Flash drive or placed in another part of the hard drive that won't automatically erase. If you need to reacquire it, see this thread:
https://discussions.apple.com/message/15680371#15680371
Mountain Lion leaves behind an installer in the Applications folder which can be copied to safe location before the installer runs, and same with Mavericks.

Disk Mode? How long pressing the select and play buttons?

Please, I`ve tried everything to turn it on my ipod since i drop it. It doesn`t appear in itunes or desktop, or my computer. It was with that exclamation mark. I was trying to turn to Disk mode, but it doesn`t go!! For how long should i hold the select and play buttons? I was holding for about 5 minutes until i gave up. Does it take that long?
Thanks, Juliana

How to put your iPod into disk mode:
1) First, make sure that your iPod is mostly charged.
2) Toggle the "hold" switch on/off a few times.
3) Hold the "menu" and "select" (center) buttons down together for 7 seconds.
4) As soon as the Apple logo appears on the screen, let off the menu and center buttons, and immediately click the "select" (center) and "play/pause" buttons until the "disk mode" screen appears.
If that didn't work, your iPod might be broken.
But before you presume that, try those four steps above several more times. Sometimes you need to do this step several times before you get the hang of it.
I hope this helps!
~~Kylene

I downloaded a track from a classical guitar album that's supposed to be 3:29, but it plays only the first 29 sec. How can I re-download it without paying again? Thanks.

I downloaded a track from a classical guitar CD on my wife's PC. It's supposed to be 3:29 (that's what shows in the playlist), but it plays only the first 29 sec before skipping to the next track. How can I re-download it without paying again? Thanks.

I cannot find Purchased on the iTunes Store. Could you upload a screenshot so I can see how to get there?
update: I found it out. It's on the home screen of the store, next to your account options on the right.

Easy Question! How Do I Play ONLY the Selection, and then playback stops?

Similar Messages

Maybe you are looking for