Easy question - how to increase number of recent files in menu?

This is for CS5 if it matters.
I'm an infrequent Illustrator user (at best) but I have what I hope is an easy question: I want to increase number of recent files showing in the menu.
I can't find a preferece to set such as in PS and almost every other application on the face of the earth. I've tried to reset the preferences file (start Illustrator with ctrl-alt-shift held down) but I'm stuck at 4 files, which I assume is the anemic default option.
Is there an easy way to do this that Adobe has hidded somewhere? As expected, it can't be found in the help, I can't find it on the forums, or even on the net, but I do know it can be done because I can see other installs showing lots of files in the list.
thanks for any help.

This might be because of a new feature that you can turn off for each object, and alltogether. When you create a new document at the bottom, make sure 'Align New Objects to Pixel Grid' is unchecked. After you have created a new file, you can still go into the 'TRANSFORM' palette (SHIFT+8), use the little right top menu, and make sure 'Align New Objects to Pixel Grid' is unchecked. And if you want to get fancy with each object; you can select an object, and look at the 'TRANSFORM' palette at the bottom is a place to uncheck the 'Align to Pixel Grid' at your disposall.
Before I found this, it ruined my week.
http://www.kenwells.com

Similar Messages

How to increase number of recent files in menu?

How do you increase the number of recent files in Open Recent menu?
Thanks

Paul Ferguson wrote:
Charles: Right now, there are as many rows as there are entries, but only three are visible so I have to scroll the list to see all twelve in my case. Would it be possible to simply grab the window and increase its size so that more rows were visible, in the same way that you can with the entire Plugin Manager window?
To automatically increase the size of the list of folders while also automatically increasing the size of the list of plug-ins is actually a fair amount of work to refactor. Our research shows that the vast majority of people just have the default two folders. However, how would you feel about 5 rows of folders as a compromise?

Increase number of recent files projects??

Does anyone know whether it is possible to increase the number of recent projects displayed under FILE > OPEN RECENT. At the moment it only displays 10 and I would really like to increase that number.I looked in preferences to no avail.
thanks
Ray

Launch Terminal.app from /Applications/Utilities/ and enter the following line:
defaults write com.apple.logic.pro NSRecentDocumentsLimit 50
"50" is the number of recent files you'd like to have.

How to increase number of data files parameter

Dear All,
I am facing problem in increasing number of data files associated with the DB. I have DB_FILES = 200 and want to set it to 300. DB was started with SPFILE.
Tell me how to increase this parameter. I dont want to stop DB also. I will be thankful if anyone guide me in both ways to stop DB and without stopping it.
Regards
Aqeel Nawaz

Madrid,
Please don't take it as nit-picking.Just wanted to point an enhancement in 10g regarding recreating control file for increasing number of datafiles.I am sure you must be aware about it.
Please see this link and this note,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dfiles.htm#sthref1340
When you issue CREATE DATABASE or CREATE CONTROLFILE statements, the MAXDATAFILES parameter specifies an initial size of the datafile portion of the control file. However, if you attempt to add a new file whose number is greater than MAXDATAFILES, but less than or equal to DB_FILES, the control file will expand automatically so that the datafiles section can accommodate more files.
From 10g onwards,the requirement to recreate teh control file is lifted.
Please correct me if I interpreted the note in a wrong way.
Regards
Aman....

Question: How to assign number ranges to the Official Excise Document Numbe

Question: How to assign number ranges to the Official Excise Document Number
Field name is: EXNUM, table name: J_1IEXCHDR
SAP CIN
Dear expert,
I will briefly explain the scenario:
I have created return po.
Process MIGO w.r.t. return PO- Material document generated.
Process: J1IS - excise invoice other movement create.
--> Now I want to print the document --> I m trying with T-code J1IP --> entered all the required data --. Used out put type - J1I0
But I am not getting the list of document for printing and even print is not coming.
There is no print document getting for a printing.
When I checked in an above said table (mentioned in question), I found that for transaction type OTHR, there is no number ranges defined for official document no.
And because of this reason I m not getting any document in the print.
Can you Pl extend Ur help and Pl suggest me where (path or transaction) the number ranges can be maintained for the official excise document No.
Thanking you all n advance and expecting your earliest response.
Regards
om

Dear Friend,
J_1IEXCHDR this table stores the all the excise documents created while excise transactions are done ,
for that Goto j1i9 or SNRO in these transaction you maintiane the number ranges for the
J_1IPLA2     PLA part II number range object
J_1IRG1     RG1 Number range object
J_1IRG1_T     No. Range for RG1 - Excise group / Material
J_1IRG23A1     RG23A part 1 no. range object
J_1IRG23A2     RG23A part II number range object
J_1IRG23C1     RG23C part I number range object
J_1IRG23C2     RG23C part II number range object
J_1IRG23D     Folio Numbers for RG 23D
like these lot of objects are there for them u maintiane the no. ranges
Regards
Pramod

How to increase number of rows display in ESS

Hi All,
how to increase number of rows display in ESS applications especially in Time approval inbox from standard display of 5 rows to say like 20 rows? is there a quick way to do it?
Thanks all
Murty

Kalpesh,
it is actually in web dynpro view, I have seen this setting and it doesnt give option for increasing default number of rows in web dynpro application. Table is dynamically constructed in web dynpro implementation and I have the hard time finding out., Any help is appreciated in these lines,
Thanks
Murty

How to increase ulimit max open files, permanently?

I have a shell script that needs to be able to receive hundreds of incoming socket connections. The default max of open files is 256. Strangely, if I run:
sudo ulimit -n 800
...ulimit -a still shows just 256 max open files. If I become root (sudo su), then I can increase the max files to 800, but that setting only remains while I'm root user.
Anyone know how to increase the max open files setting for my regular user name, as I run scripts from the Terminal bash shell?
...Rene

Wow, within 2 minutes, I realized what I had to do, so in case anyone else wonders the same, here's the solutions:
Just edit the .bash_profile file in your home directory (create it if it's not already there), and add the line:
ulimit -n 1024
Now, whenever you start terminal, that process will be able to open up to 1024 files or socket connections.
...Rene

Upping the number of Recent Files shown in menu?

There used to be a preference for this in CS2, but I can't find where to up the number of Recent Files shown in the File menu. Is this still possible?

Look for the Preferences file in your user-folder and open it in a text editor.
Then change the entry maxRecentFiles
If you want to be sure: make a copy of the file before editing

How to Increase the # of Recently Opened Files in DW CS6 ???

Can anyone please give a detailed instruction on how to increase the number of Recently Opened files in Dreamweaver CS6? I have read the forums everywhere and do not see a solution here that works. For me there is no: Menus/MM/File_RecentFiles.htm
I mean I have a "Menus" directory but no "MM" directory inside that... also, if I create one... I still need a sample "File_RecentFiles.htm" to copy. Or maybe someone knows another solution?

I don't have DWCS6, just DWCS4 and DWCC. When I go to Program Files(x86) > Adobe > Adobe Dreamweaver CC (or Dreamweaver CS4) > configuration > Menus > MM > and then open the file named "File_RecentFiles.htm" at either location, this is the code...

<html xmlns:MMString="http://www.macromedia.com/schemes/data/string/">
<HEAD>

<TITLE><MMString:loadString id="Menus/MM/File_RecentFiles/title" /></TITLE>
<SCRIPT LANGUAGE="javascript" SRC="../../Shared/MM/Scripts/CMN/string.js"></SCRIPT>
<SCRIPT LANGUAGE="javascript" SRC="File_RecentFiles.js"></SCRIPT>
<SCRIPT LANGUAGE="javascript">

</SCRIPT>
</HEAD>
<BODY>
</BODY>
</HTML>
EDIT: It appears you should definitely have this file, unless something is wrong with your installation, or perhaps you are in the wrong directory?

How to Increase Number of Images from 500 in a LR3 Flash Gallery

I noticed people asking (and I myself needed to know) so I thought I would explain how to increase the number of images (from 500) in a Flash gallery in Light Room 3
1. I exported a Flash gallery from LR3 and it capped the gallery at 500 images.
2. Because I had roughly 600 images to put in the gallery, I exported the remaining 100 as a separate flash gallery. (Going ahead and exporting 2 galleries will save you headache in a later step)
3. I combined all the images folders (copying "large" images from one folder to the "large" folder in the gallery I want to upload to my site, etc.) so that the files are all in one location.
4. The next step is to increase the gallery maximum in the code. Access (from the exported gallery) GALLERYNAME/resources/mediaGroupData/group.xml and open the group.xml file. The line of code you will be changing is <media totalGallerySize="500"> Change the 500 to the number of photos you want in the gallery.
5. This next step isn't too complicated, but it is specific. You know have to tell that flash file to look for the images you just transferred to the images folder. The best way to do this is to open the group.xml file for the second gallery you exported. Copy all the code beginning with <item> to the bottom of the page. This code tells the gallery to look at your specific images (Note: you'll notice within each item the names of your image file)
6. Return to the (other) group.xml file of the gallery you plan to use (with all your images in it). Scroll to the bottom and erase the lines </media> and </mediagroup> becaue you will repaste them in a moment. Next, paste the copied code there.
7. Save & check your browser!
I hope this was clear...please comment back and I'll clarify if needed.
ro

500 images in a single gallery is too many - think of the poor viewer!
But if you must create Flash galeries with more than 500 images, you're better off editing the underlying engine - here's one link showing how to do it

How to increase number ptys in Solaris 10?

Hi,
How do I increase number of ptys in Solaris 10, also what command to view how many total currently set?
I try to put set pt_cnt = X and rebooted, seems to be not working.
Thanks!

Solaris 8 and later versions should not need pt_cnt. Ptys should be dynamically allocated as needed. Can you describe the problem you are having?
See the Solaris 2 FAQ:
http://www.science.uva.nl/pub/solaris/solaris2.html#q5.30
5.30) I get Could not grant slave pty on telnet/rlogin
In Solaris 8 and later you must make sure you have syseventd/devfsadmd running or the automatic pty node creation does not work.
In older releases this probably means that you changed "pt_cnt" but didn't reboot with the "-r" flag. To recover, run "drvconfig; devlinks".
So, you should make sure syseventd and devfsadmd are running.
Darren

Easy Question: How to split concatenated string into multiple rows?

Hi folks,
this might be an easy question.
How can I split a concatenated string into multiple rows using SQL query?
INPUT:
select 'AAA,BBB,CC,DDDD' as data from dualDelimiter = ','
Expected output:
data
AAA
BBB
CCC
DDDDI'm looking for something kind of "an opposite for 'sys_connect_by_path'" function.
Thanks,
Tomas

Here is the SUBSTR/INSTR version of the solution:
SQL> WITH test_data AS
2 (
3          SELECT ',' || 'AAA,BBB,CC,DDDD' || ',' AS DATA FROM DUAL
4 )
5 SELECT SUBSTR
6          (
7                  DATA
8          ,       INSTR
9                  (
10                          DATA
11                  ,       ','
12                  ,       1
13                  ,       LEVEL
14                  ) + 1
15          ,       INSTR
16                  (
17                          DATA
18                  ,       ','
19                  ,       1
20                  ,       LEVEL + 1
21                  ) -
22                  INSTR
23                  (
24                          DATA
25                  ,       ','
26                  ,       1
27                  ,       LEVEL
28                  ) - 1
29          )       AS NEW_STRING
30 FROM    test_data
31 CONNECT BY LEVEL <= LENGTH(REGEXP_REPLACE(DATA,'[^,]','')) - 1
32 /
NEW_STRING
AAA
BBB
CC
DDDD

How to Increase number of oacore jvm's in EBS 12.1

Hi,
Does anybody know of a document showing how we increase the number of jvm's for the oacore in EBS 12.1 ? I found some google searches detailing changing the opmn.xml file but I would like to see a document detailing which references need to changed.
Also it is often stated that 1 jvm should configured for each cpu and best practice should be a 1 jvm should be configured for 2 cpu's. Does the type of processor effect this rule, is this as valid for a risc processor and a intel processor.
Thanks
Mike

Please see these docs.
Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12 [ID 362851.1]
How To Prevent Inactive JDBC Connections In Oracle Applications [ID 427759.1]
Thanks,
Hussein

How to increase number of folders Apple Mail allows.

New folders in Apple Mail are appearing at end of list, rather than alphabetically.
Thanks for any suggestions to increase number of folders allowed.

Deepak,
Check out the following link http://ysislmap.googlecode.com/svn-history/r3/note/siebel/MTServer.txt ..Will help you in configuring Max tasks.
I think you are using workflow policy programs to trigger emails using Email Manager component,if this is the case then it is not a recommended way to create another email manager component running in another siebel server,coz at same time both siebel servers will invoke the component to trigger mails ending you up in receiving two similar mails.
-Sambit

Easy Question -How to start ALUI 6.5 portal?

I am new in Aqua logic, after fixing all my database problem waiting to start ALUI 6.5 portal. My ALUI config manager link is: https://home2003.home2003.win2003mydomain.com:9090/cm/login.jsf which works fine. Also http://192.168.0.100:8282 works fine. Finally http://home2003.home2003.win2003mydomain.com:8282/imageserver/ - this link works as well.
Here is my environment: OS: W2003
APP Srv: Tomcat, Port: 8282
Database: Sqlserver 2005 Enterprise
Server IP: 192.168.0.100 or home2003
Also comepletd the following steps:
1. Lunched tomcat manager and deployed portal.war files.
2. Restarted Tomcat and found a new directory structure created like : E:\Tomcat6\work\Catalina\localhost\portal\WEB-INF\. It has folders "classes" and "lib" . "Classes" is empty.
1. what will be the URL to start the portal? I tried following ways, none of them worked:
http://home2003.home2003.win2003mydomain.com:8282/portal/server.pt/
http://myportal.home2003.home2003.win2003mydomain.com:8282/portal/server.pt/
http://home2003:8282/portal/server.pt/
I'll be more than glad if anyone can help me on that?
===================================================
By the way here is my diagonastic log:
E:\bea\alui\ptportal\6.5\bin>ptverify.bat
PORTAL_HOME=E:\bea\alui\ptportal\6.5
Expected PORTAL_HOME=E:\bea\alui\ptportal\6.5
Running Verify...
Attempting to get a settings context using config folder: E:\bea\alui\settings
OpenLog: verbosity level = 2
OpenLog: Registered application name: ConfigInitialization (local machine only)
OpenLog: Registered application name: portal.home2003.arab (local machine only)
Retrieving DB settings...
DATABASE CONFIGURATION SETTINGS
Database Type: mssql
Database Username: aliuser1
Database Hostname: HOME2003
Attempting to initialize session...
Base library name : openkernelsearch_4-3j
OpenLog native: Registered application name portal.home2003.arab (local machine
only)
Session connected!
SEARCH CONFIGURATION SETTINGS
Search Query Hostname: home2003
Search Query Port: 15250
Search query server is running!
Search was successful, got 0 matches
SUCCESS!
Press any key to continue . . .
E:\bea\alui\ptportal\6.5\bin>diagnostic.bat
PORTAL_HOME=E:\bea\alui\ptportal\6.5
Expected PORTAL_HOME=E:\bea\alui\ptportal\6.5
Running Diagnostic Tool...
OpenLog: verbosity level = 2
Diagnostic system initialization OK.
Portal Startup begins: 15 total tasks.
OpenLog: Registered application name: ConfigInitialization (local machine only)
OpenLog: Registered application name: portal.home2003.arab (local machine only)
Base library name : openkernelsearch_4-3j
OpenLog native: Registered application name portal.home2003.arab (local machine
only)
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
======= Diagnostic Run Complete =======

Thanks a lot. I found an improvment after following your instructions.. seems i am getting closer to see the first glance of Aqualogi. Now i am not getting any error regarding search service. But at the end still getting 404 error :( :(
Question: Whats the minimum number of ALUI service needs to be installed to see ALUI portal?
Here is the log:
E:\bea\alui\ptportal\6.5\bin>ptverify.bat
PORTAL_HOME=E:\bea\alui\ptportal\6.5
Expected PORTAL_HOME=E:\bea\alui\ptportal\6.5
Running Verify...
Attempting to get a settings context using config folder: E:\bea\alui\sett
OpenLog: verbosity level = 2
OpenLog: Registered application name: ConfigInitialization (local machine
OpenLog: Registered application name: portal.home2003.arab (local machine
Retrieving DB settings...
DATABASE CONFIGURATION SETTINGS
Database Type: mssql
Database Username: aliuser1
Database Hostname: HOME2003
Attempting to initialize session...
Base library name : openkernelsearch_4-3j
OpenLog native: Registered application name portal.home2003.arab (local ma
only)
Session connected!
SEARCH CONFIGURATION SETTINGS
Search Query Hostname: home2003
Search Query Port: 15250
Search query server is running!
Search was successful, got 106 matches
SUCCESS!
Press any key to continue . . .
E:\bea\alui\ptportal\6.5\bin>
Edited by: user5118489 on Sep 15, 2009 4:05 AM
Edited by: user5118489 on Sep 15, 2009 4:13 AM

Easy question - how to increase number of recent files in menu?

Similar Messages

Maybe you are looking for