Easy reject software- problem , reject all the ca...

I have a Nokia 5800 installed with easy reject downloaded from nokia support and software for 5800. I have activated same and using, But what i observe after sometime, This start rejecting all calls[known & Unknown] which is not listed in their filter list.. Pl a help

YEs... this software has a major problem ,coz whnever i import any number to the block list ... Others too get blocked ... and finaly i hav to switch off and switch on my mobile to resolve this problem ... SO i think its a worthless Application NOKIA has brought in ..!! They need to check innumerable times befre they release it in market.. A big shame
I RATE THIS APPLICATION 1/2 *

Similar Messages

My headphone jack no longer works. I just upgraded software and did all the iCloud install.

my headphone jack no longer works. I just upgraded software and did all the iCloud install. Any ideas?

It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
Alternatively ou could try Gutenprint (open source software):
http://gimp-print.sourceforge.net/MacOSX.php
I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you.

Why my iphone6 always cant receive call form other people? i am use the iphone in mainland china. it is my iphone problem or all the iphones have this problem in mainland. please answer me. thanks.

why my iphone6 always cant receive call form other people? i am use the iphone in mainland china. it is my iphone problem or all the iphones have this problem in mainland. please answer me. thanks.

Hello tashi1234,
Welcome to the Apple Support Communities. If you are having an issues with the Phone app on your iPhone, the next step would be to restore the iPhone. The following will assist with backing up your iPhone.
iOS: How to back up
http://support.apple.com/kb/HT1766
Once your iPhone is backed up then go through with the process of restoring the iPhone.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Regards,
-Norm G.

Issues with processing messages on one receive port causes problems on all the receive ports that are on the same handler

Greetings,
An integrator installed biztalk in our environment to process the hl7 message flow between their source application(s) and several receiving applications. We've had problems with this set-up for a while now because some receiving applications sometimes have
problems processing the messages. Be it either because there's problems with the server that processes the messages of a certain port or because there's problems with the software/daemon/service that needs to process these messages.
The main problem with this, is that the receiving end of this isn't under our control nor under control of the integrator, but when one receive port isn't processing their messages for a while it causes a problem with all the receive ports that are on the
same handler. So other receive ports start noticing a slow-down of their incoming messages until after a while nothing gets through anymore.
What is the best practice to prevent these kind of problems? Should we just create a handler for every receive port? Because that seems a bit overkill.
Thanks in advance.

What do you mean exactly with this question?
"Can you provide some more detail like BizTalk the receiver? "
The adapters are mainly file and MLLP, the MLLP adapters are already seperated from the file adapters (a handler for MLLP and a handler for file).
The problem with all the receive ports is that when one receive port isn't processing its messages (usually caused by the software processing the messages) the other receive ports on the same handler receive their messages/files a lot slower. If for any
reason the problem isn't fixed soon, the other receive ports on the same handler actually stop receiving any messages at all.
Isolating the receive port that causes the problems like la Cour suggested can work, but next time it might be another port that experiences this issue. So we are looking for a way to make sure the whole message flow isn't hindered by one port (whichever
port) that can't process its messages. Or rather by one receiving software that can't process its messages.

I have just updated to Yosemite, but now I can't get the custom shortkeys to work. In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution. Does anyone have the problem? All the other shortcuts work!

I have just updated to Yosemite, but now I can't get the custom short-keys to work.
In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution.
Does anyone have the problem? All the other shortcuts work!

Hi Thomas,
I can confirm the problem you are hitting. The XML test trace does not get recognized at all, and it defaults to Eclipse's basic Open File behaviour. I am not sure if it's because the format definition is missing, or if it's because something prevents the trace type from being recognized. I will open a bug about it.
Thanks for identifying this issue!
In the meantime, if you'd like to experiment with XML analyses, you can also take a look at the example at https://github.com/tracecompass/xml-analysis-example .
Cheers,
Alex

TS1702 i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. pls help as am frustrat

i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. it staarted again this evening, pls help as am frustrated. NB- i checked for apps update but all my apps are up-to-date. CT

Try the usual steps: restart, reset, restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414
If restoring using a backup doesn't help, try restoring the iPhone to factory settings and try for a while with just the Apple-included apps, to make sure it's not an issue with a third-party app. If it still has problems, it may have a hardware problem and will need to be sent to Apple.
Regards.

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...????

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...???? In the box with the disk came the product key, have put it in and it doesnt work. Please help..x

unfortunately - you can not. you can't even buy outlook by itself at microsoft's own website.
does it have to be outlook? maybe you can get away with using something else that's outlook compatible.
how about trying Thunderbird for Mac OS?
or maybe you can call apple and let them know you purchase the wrong version - they might give you a break and just pay the difference for the home and business version.
good luck

Using Itunes, I copied all my apps from my Ipod touch to a new Iphone 4. Problem is all the apps on the Iphone are starting up like a new install. I would think my "password" app and "lose it" app would have the past data transferred to the Iphone.

Using Itunes, I copied all my apps from my Ipod touch to a new Iphone 4. Problem is all the apps on the Iphone are starting up like a new install. I would think my "password" app and "lose it" app would have the past data transferred to the Iphone. Is this not possible??

Try this Discussion...
https://discussions.apple.com/message/19529357#19529357

HT1296 i have just updated to the newest version of ipod softare, the ipod intalled new software but now all the music and videos on it will not play

i have just updated to the newest version of ipod softare, the ipod intalled new software but now all the music and videos on it will not play, how do i fix this

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and videos and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I can't access google but i can access every other site. I have this problem in all the browsers. Can somebody please help?

Hi.
I can't access google in any browser ( Chrome, Explorer,Firefox). It just does not load. But i don't have any problem with any other sites. Actually i could even access google just yesterday.
I've tried deleting the cookies, installing anti-malware softwares, i cleared the cache, i cleared all the history etc... I basically tried everything that was proposed on previous questions but nothing helps.
I would really appreciate it if someone could help.
Thank you.

Try to access google.com through the below ip.
1.) http://74.125.225.81
2.) http://74.125.225.84
3.) http://74.125.225.82
4.) http://74.125.225.80
5.) http://74.125.225.83
If this resolves your problem, check the DNS settings.

Problem changing ALL the colours for Visual Composer

Hi All,
To set the scene:
I have SP13 installed.
I have created a Visual Composer model, selected the option "Enabling styling of flex controls in portal themes", and deployed it.
Then gone into the Portal > System Admin > Portal Display > Theme Editor > Selected the correct theme > Visual Composer > Flex Runtime Controls
Then changed all the colours
The Problem:
I cannot change ALL the colours. There is this blue box that borders all the form headers which i cannot seem to change. I have provided a link to a screenshot below.
<a href="http://base.google.com/base/a/2957240/D319638570621304478">Screenshot Link Here!</a>
The field that I would assume fixes this ("Border Color of View Header") seems to have no effect?
Anyone also had this problem or know of a solution?
Thanks
Conrad Nicholas

Hi Conrad,
This issue is a bug.
It was brought to our attention and was already fixed.
The fix will be available in the next release.
Thank you for your input,
Shay

IPhone 3GS and OS 4.01 software - shuts off all the time

I installed OS 4.01 and my phone quits all the time, problems seem to be when using camera more often then not, and sometimes I get the red bar battery depleted and when I plug in, it boots up and says battery 65% ?
Any fix's for this ?? any way to go back to OS3, I've reset and it reinstall with OS 4.01?

Have you tried reset?
Restore?
No, there is no legit way to go back.

I cannot print ANYTHING frmo the internet/email at all; only from Word. Comcast & Kodak say it's a FireFox problem. All the letters are little square ones with 1 to 2 spaces in between each word.

I cannot print ANYTHING from email or internet at all; only from Word. Comcast and Kodak says it's a FireFox problem. I have work to print and cannot. All the letters are little square ones with 1 to 2 spaces in between each word.

Caused by a Bug in Firefox 4.0b12. It was fixed on Monday in the 4.0b13 pre "tester" nightly's. The fix will be in the 4.0 Release Candidate.

Still having data problems after all the fixes. Should I wait to return?

Hi there, I've had the Thunderbolt for about a week now. I've been having the data connection problems like everyone else, especially right after I end Internet Connection Mode.
I did all the fixes, like factory reset, dialing the *#*#4636#*#* and the ##778 options, but to no avail. I can only guess it's the network that's having problems. I live in Spokane, WA and I know that they're probably testing out 4G in the area, so this might be the reason why the phone may be having connection problems.
But what should I do? What will happen when 4G turns on and yet my phone still has the connection problems? Will I be out of luck, since I'll be out of my 14 day return window? Overall, I still like the phone, but I don't want to keep it if there's somthing wrong with the phone itself.

JaySean wrote:
i also had data issues, i called them but they said the sim card is fine. I'm still having alot of issues here to the point where im contemplating getting the iPhone 4
I'm sure they did say it was fine and in that techs opinion it might be but that tech or csr might not have the proper training or knowledge of what you or HTC is asking them to do. Example: I called and told them to reprovision my sim card and the first tech I got then instructed me on how to clear my cache and internet history. So I called HTC back and they told me "no that is not a sim card reprovision and to insist that a tech do the procedure". So I called vzw tech support again and requested the same thing " reprovision the sim card " and what do you know the tech said ok no problem.
If they do what your asking they will have you power down the device > remove the battery > pull the sim card out > wait > then reinstall everything > and power up the device. After that they might have you check a few settings and your done.
So don't let a CSR that doesn't know how to address this issue give you bad feelings toward your Thunderbolt. I will admit that at first I was a little upset about the issues I was having and started to think I was going to have to deal with it till the next 4G device that I would consider a reputable replacement came out ( cause I won't go to an Iphone ever ). Now that I've had my T-Bolt for a few weeks you can't take it away from me. My issues with it have dwindled and my love for it has sky rocketed.
But if you want to jump ship for a 3G, tiny screened, locked down, no widget, pay for everything, itunes, update via usb, soon to be / already out dated, expensive device then more power to ya. In few months when updates roll out and when gingerbread becomes available for the T-Bolt you'll be looking over the shoulders of those that stuck with it and say " I wish my phone could do that ". lol I kid but seriously stick to your guns and demand VZW to the reprovision because if it does for you what it did to my T-Bolt you will regain confidence and love this device.

Urgent solution needed for the Problem ( get all the combination from table

we are having a table in following format
day | grpID | pktID
sun | 1 | 001
sun | 1 | 002
sun | 1 | 003
sun | 2 | 007
sun | 2 | 008
sun | 2 | 009
mon | 1 | 001
mon | 1 | 002
mon | 1 | 003
mon | 2 | 007
mon | 2 | 008
mon | 2 | 009
tue | 1 | 001
tue | 1 | 002
tue | 1 | 003
tue | 2 | 007
tue | 2 | 010
1. We have a combination of pkdIDs related with a specific grpID, for a particular day.
Ex: For Sunday, we have two combination list for grpID=1 is (001,002,003) and for group id = 2 is (007,008,009)
2. We need to get all the available combined pktid for each group id for all the days .
Eg the the expected result that is needed from the above table
(001,002,003)
(007,008,009)
(007,010)

SQL> with tbl as
2 (select 'sun' d, 1 grp, '001' pk from dual union all
3   select 'sun' d, 1 grp, '002' pk from dual union all
4   select 'sun' d, 1 grp, '003' pk from dual union all
5   select 'sun' d, 2 grp, '007' pk from dual union all
6   select 'sun' d, 2 grp, '008' pk from dual union all
7   select 'sun' d, 2 grp, '009' pk from dual union all
8   select 'mon' d, 1 grp, '001' pk from dual union all
9   select 'mon' d, 1 grp, '002' pk from dual union all
10   select 'mon' d, 1 grp, '003' pk from dual union all
11   select 'mon' d, 2 grp, '007' pk from dual union all
12   select 'mon' d, 2 grp, '008' pk from dual union all
13   select 'mon' d, 2 grp, '009' pk from dual union all
14   select 'tue' d, 1 grp, '001' pk from dual union all
15   select 'tue' d, 1 grp, '002' pk from dual union all
16   select 'tue' d, 1 grp, '003' pk from dual union all
17   select 'tue' d, 2 grp, '007' pk from dual union all
18   select 'tue' d, 2 grp, '010' pk from dual) -- end of data sample
19 select distinct '('||ltrim(max(c1) keep (dense_rank last order by lv),',')||')'
20 from   (select d,grp,level lv,sys_connect_by_path(pk,',') c1
21          from   tbl
22          connect by d=prior d and grp = prior grp and pk > prior pk)
23 group by d,grp;
'('||LTRIM(MAX(C1)KEEP(DENSE_RANKLASTORDERBYLV),',')||')'
(001,002,003)
(007,008,009)
(007,010)
SQL>That works on 9i. Other possiblities on 10g.
Nicolas.

Easy reject software- problem , reject all the ca...

Similar Messages

Maybe you are looking for