Easy Setups won't change with sequence.

I have to go back and forth between different sequences with different Easy Setups ascociated with them. I'm running a Kona LH card with Ver. 6, with ver. 5 everything would automatically change once clicked on the other sequence...now with the upgrade I have to change the Easy Setup everytime. I don't know what I missed. If this has been addressed a million times already I apologize, my faulty brain often let's me down. Thanks

Every time I switch from a DV project to a DVCPRO HD project, I'd have to change the settings. Nothing automatically changed...and I am running FCP 5.1.4.
You still have to do this. If you want to monitor DV and make DV sequences, choose the DV/NTSC setting, then move to DVCPRO HD, choose the DVCPRO HD settings.
Always had to do this.
Shane

Similar Messages

I changed my Apple ID but my iCloud won't change with it ...

I changed my Apple ID a while ago because the email address it's synced with will expire in a few months. I got an iPhone 5 today (I previously had a 3GS) and although it's synced my contacts and music perfectly, my apps all say they're installing but none will finish. I can delete them and reinstall them just fine but it's just time consuming, also it won't download all my pictures from the iCloud which is where I backed up all the stuff from my old phone.
Whenever I go onto iCloud in my settings it asks me to put in the password for my Apple ID, but it won't accept my password and it shows the old email address. When I download an app it says the new Apple ID that I changed it to and works fine, it just seems to be iCloud that's the problem. Any ideas how I can get the old email address on iCloud to change to the one that is actually my Apple ID now? Sorry if none of this makes sense!
Also, I can't delete it, at the bottom of the iCloud page on settings it says 'You cannot delete your iCloud account because your iPhone is being restored.'

I am having this exact same problem right now. I have been on the phone with Apple support twice in the past day, and no one has been able to help me. FINALLY I came across this thread, which is exactly what is happening with my phone (thank goodness, I'm not crazy!).
Did y'all ever resolve this issue? What did you do?
I've read that I can't delete this iCloud account/my phone is still restoring because something/s is/are still downloading... but I can't tell what. My music is completely downloaded (I only saved 52 songs). I have deleted all of my apps (half were stuck, as you said, and I was being prompted for my old Apple ID password, so I just deleted them all). I see a message in my photos that says "Downloading 0 of 652 Photos," but they never download/show up. If it's the photos that are still downloading that is preventing me from deleting my old iCloud account from my iPhone, will they ever show up so the restore will end?
I don't want to hit the "Stop Restore" button in fear I might lose those 652 photos that aren't showing up, but I'm tempted... I just want to get rid of this stupid old Apple ID in the iCloud and type in the right one!
What did y'all do? Hope you see this! I'm desperate and live in the middle of nowhere where the nearest Apple store is about 150 miles away

Cover Flow Album Art won't change with Song Change

When I play songs in Cover Flow mode (landscape), the album remains on the same album that I first played even though the song has advanced to another album. Is this behavior consistent with anyone else or is this only my iPhone that is acting this way? Seems like the album art would change when the song changes, as it does in portrait mode.

I have many problems occuring randomly when i try to use Spotify on my Ipad Air 2 in the BMW car in offline mode.
*After some time Album Art and track names are no longer updated
* After some time some of the HMI buttons get greyed out
I was able to solve all these issues by temporarily enabling WLAN hotspot on my mobile phone, then spotif on the ipad will correct itself.
Of course that's no permanent solution to fiddle with the mobile phone while driving, it must be some sort of bug of spotify that will hopefully get fixed to have proper offline usability in the car.

Brush size won't change with bracket keys?

Hey - I'm having an issue with Photoshop CC that I haven't encountered with previous versions of Photoshop (I've searched for solutions first - no luck). My shortcut keys for Brush size '[ & ]' stop working after choosing a different brush (even the default brushes). I can still use the Alt+mouse shortcut, but I'm old school and like using the brackets. I tried re-establishing my shortcuts in Preferences, but that did nothing. Suffice to say I'm quite frustrated as this has impacted the workflow I'm used to.
Any help or advice would be greatly appreciated - thanks in advance.
Dustan

Thanks! It never occurred to me that caps lock would have any effect on brush cursors.

Resoltution won't change with new computer

I just gave my dad my computer (powermac g4 867 mhz) which used to have mac os x tiger 10.4.3 but now had mac os 9.2.2 on it (he kept his hard drive from his old computer). However, his monitor, which I know for a fact supports up to 1600 x 1200, now only has the option to use 800 x 600. (the monitor panel only lets me show the "'recomemded" and "show all" isn't shown.
Is there some kind of firmware problem when I changed from os x to os 9? Does anybody know what is going on here?!?

I figured it out myself, happened to be a graphics card driver not installed

Are Easy Setups with Custom Capture and Sequence Presets Portable?

Hi,
I created some Custom Capture and Sequence Presets. Then I created some Easy Setups that use these presets.
Can I copy the Easy Setups to another machine or do I need to create or copy the Custom Presets in order for the Easy Setups to work?
If I need to copy or create the Custom Presets how can I copy them (which files do they live in)?
Thanks!
Mitch

Jerry Hofmann wrote:
These files are located in HD/Library/Application Support/Final Cut Pro System Support/Settings... so just drag the custom setups from there to a flash drive or CD and then place them in the other system's folder in the same path.
Jerry
Hi Jerry,
Thanks for the reply. The Easy Setups are in the directory you mentioned but the Custom Presets are not.
My question is are the custom presets used by the Easy Setup contained inside the Easy Setups? If not are there files I can copy or do I need to manually create them on the second Mac?
Since the other Mac is 50 miles away I have no easy way to test this. If there are files I can bring rather than redoing the custom presets that would be quite a bit easier.
Thanks Again!
Mitch

How to kill custom Easy Setup / Sequence Presets?

I set up some experimental Sequence Presets and Easy Setups and now want to delete them. I have tried every recommendation that I could find (details below) but they still show up in the lists. Where on earth are these things stored??
Here's what I've done:
1. Repaired disk permissions
2. In FCP, selected the Sequence Preset and pressed the Delete button.
3. Exited Final Cut Pro.
4. Trashed the preferences by deleting these files:
~/Library/Preferences/com.apple.FinalCutPro.plist
~/Library/Preferences/Final Cut Pro User Data/Final Cut Pro 6.0 Prefs
~/Library/Preferences/Final Cut Pro User Data/Final Cut Pro Obj Cache
~/Library/Preferences/Final Cut Pro User Data/Final Cut Pro Prof Cache
5. Emptied the Trash
6. Rebooted the computer.
7. Started Final Cut Pro.
8. The Presets/Setups are still there!! Tried to find them by name with Spotlight. Doesn't find anything. Tried to find them using the command-line Defaults program. Doesn't find anything. Looked in
/Applications/Final Cut Pro Additional Easy Setups
They are not there.
I also have Final Cut Express installed and trashed all its preferences too for good measure. But my custom settings will just not die.
All ideas welcome!

Agh auuuh agh? What a lot of coughing...
1st thing to do: What format does your camera shoot? Make your Easy Setup & Sequence Settings reflect it.
The wierd experimental formats are hiding. As a Final Cut Pro expert and official top user:

Added a scanner with Secure Easy Setup and my wireless network has disappeared?

I just replaced my fax/scanner. I have a secured wireless home network. I installed the fax/scanner with Secure Easy Setup. The fax works - but my home network as disappeared!!! Where did it go? Do I have to start over and reinstall my whole wireless network? It took me forever to get it working the first time! HELP!!!

when u run easilink again it will give you the chance to change some settings wirelessly, it could be that you have changed some settings and missed that part...
you could check that by accessing the set up page of the router 192.168.1.1

E2000 won't connect to laptop using Easy Setup Key

Running Win7. When trying to connect Lenovo laptop to E2000 with Easy Setup Key, the progress bar hangs at 25%. However, the E2000 will connect to the laptop with an Ethernet cable. Same problem on both of my Lenovo G555 laptops. Any ideas?

I have heard about this concern with Atheros adapters and where it cannot connect with WPA or WPA2. Check if you set the security to WEP if it will connect. (Usually it does). And better check for updated drivers from this website. http://www.atheros.cz/ (manually update the drivers). The automatic update with windows will most of the time load the same driver version. So it would be best to update the drivers manually.

Working with Pixel Dimensions and HDV Presets in Easy Setup

hi there, i’ve got another question...
i am still learning the in and out’s of hdv capture. I wanted to verify that the easy setup HDV 1080i plugin is what I want to use for import for my HDV footage which was shot with a Sony A1U HDV camera. I believe it was recorded at 1920x1080 and the imported quicktime file says it is imported at 1440 x1080(and in parentheses it says 1888x1062)..why does the HDV 1080i FCP preset not import at the same frame rate as it was recorded at….?
also does a Sony FX1 use the same HDV preset at the A1U?
many thanks
adam

Tom,
You’re right, …again!
Up till now, I really thought that I had true HD coming out of this camera; shame on me! It really does look good.
I’ve browsed the specs of my Canon HV30 User’s manual, and no where does video say 1920x1080; only 1080i ! That’s why when I ingest and capture using ProRes 422HQ, I only see the 1440x1080 Browser frame size.
(Still images from this camera do produce a 1920x1080 and 2048x1536 sizes)
Let me ask your opinion and that of anyone else out there.
If I were to use video from this camera, and move up to an external BluRay burner and player, ……would I achieve better looking DVD video quality than what I’m currently seeing when burning DVD’s using iDVD-Best Performance and playing back on a standard def (upscaling) DVD player ?
And if not, which consumer camcorder would you recommend that DOES provide true 1920x1080 for capturing into FCP, and costs under $1000 !
Thanks
BoBo

IPhone 5 with updated ios8 won't change orientations (landscape vs portrait).

My iPhone five with updated ios8 won't change orientation between landscape and portrait. Does anybody have any suggestions?

Hi lmilesfromnowhere,
Welcome to the Apple Support Communities!
There may be a couple of different things I would suggest here. The first thing I would do would be to check and make sure the orientation lock is off.
iOS: Screen does not rotate
If the lock is off and the issue continues, I would recommend restarting your device. If the issue continues after the restart, reset the device.
Turn your iOS device off and on (restart) and reset
Have a great day,
Joe

(T530 with openSUSE) Brightness won't change after mainboard replacement

Hi!
The mainboard of my ThinkPad T530 2429 6JG was replaced today. Now the brightness control doesn't work anymore. I'm using Linux (opensuse 12.3). The brightness keys on the keyboard seem to work, as the usual "brightness control animation" is shown. Also the file /sys/class/backlight/acpi_video0/brightness is updated correctly. However, the screen brightness just won't change, neigher up nor down. There were no issues with the old board and I haven't done any changes to my operating system. Therefore it must be an issue with the board. Does anyone know if there's been a recent change in firmware etc.? (The new mainboard is probably from April 2013)
By the way: In Windows 7 (I have both systems on my HDD) the brightness can be changed without any problems.
Many thanks!!
Jan

got same problem... need to change acpi_os
http://www.laboiteaprog.com/2013/04/lenovo-s430-et-linux.html

Changing audio pre-sets (i.e. not using easy setup)

Easy setup (DV-NTSC anamorphic) is forcing me to use a 48 hz audio preset and I did not record my video in this setting. How do I change it to 12 hz (I always re-do the audio later, but while capturing, warning window is annoying.)

I did not have all the options clicked. When I did this, the right option popped up.

Changing aspect ration in FCP 7, Easy Setup?

I recently starting editing again in FCP 7 and am running into an aspect ratio problem.
Earlier this fall i tried capturing some clips off of my new camera (Panasonic HVX) and i believe i changed some of the easy setup/capture settings to accommodate the HD footage. This weekend i used my old mini dv camera (Sony vx2100) to record some skating.
I didn't change the easy setup/other settings prior to capturing the tapes.
The image doesn't look as it looks ok in the viewer, but doesn't fully fill the canvas.
When i export to vimeo, the image doesn't fill the whole screen.
The image itself looks ok, but i believe the aspect ratio is off somehow.
This is a link to how the vimeo export turned out
https://vimeo.com/85702402
here is a link to another edit i'd made previously in the summer where the image filled the screen better
https://vimeo.com/73221381
here is a screen capture of the canvas
anybody know what i should do?

You need to ask this on the Final Cut studio forum.

How to configure the Easy Setup to match the sequence type for playback

Plesae provide some suggestion for how to configure the Easy Setup in FCP 6.05.
*Uncompressed HD 8-bit (1920 x 1080p30)video streams
e.g:
1. Choose Final Cut Pro > Easy Setup.
2. Choose ?? from the Format pop-up menu
3. Choose “all rates” from the Rate pop-up menu.
4. Click the USE pop-up menu, choose which format?
Also how about Uncompressed SD 8-bit (720 x 480p30) video streams ?
Thanks,

Thanks for the advice.
In the project, I created two sequences.
Import all my HD 8-bit clips into sequence 1, and say yes to mach the format
and import all my SD 8-bit clips into sequence 2 and say yes.
In Sequence-> setting-> I verified the configuration as following:
However, that is "Load sequence preset" button, I am not sure what is that for and also do I need to go to Final cut pro -> easy setup to configure the format again?
I just want to playback all my HD clips to make sure no dropped frame and
then playback my SD clips sequence to make sure the performace are OK.
Here are the format for HD clips:
HD 1920x1080 HDTV 1080i (16:9); upper; uncompress 4:2:2.
Here are the format for HD clips:
SD 720x480 NTSSC DV (3:2), NTSC-CCIR601, lower , uncmpress 8-bit 4:2:2.

Easy Setups won't change with sequence.

Similar Messages

Maybe you are looking for