Easy solution for Q10 and POP email setup

I am posting a suggested solution to all of the POP email headaches for anyone running OS 10. I recently upgraded from a Torch 9810 to the Q10 and have had an awful time trying to intall and run my sympatico.ca email accoun in the new OS 10. I understand this is an POP email account.
I have stumbled upon this solution quite by accident - not one of the so-called tech experts at Bell or Rogers Wireless, despite countless hours spent on the telephone and in chats with them, were able to suggest this to me, which I found quite astounding!
All fo the tech experts kept telling me to install my sympatico.ca email account as a POP account - despite dozens of attempts, it would never work and sync properly!
The solution? Go into the advanced email setup options and choose Outlook as the account type, not POP, Exchange, or anything else. Enter your email address and account password and do not change any of the default settings that OS 10 will give you. Just finish the set up and, presto! You have access to all of your account folders and sycing seems to work magically.
I hope some of the tech experts at the Internet and wireless providers read this forum from time to time...it could save frustrated customers many hours!

It's possible that Sympatico has recently enabled Exchange Active Sync (EAS) access. If so, that is a great thing for all Sympatico users.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

SP 7000i Subj: Getting ring tones for messages and/or email to a Bluetooth device i.e., H700C

I ask if the ring tone notification for messages and/or email would ring to the Bluetooth. I was told they would.
Is there an solution?

Did you mean that you're getting tone for Messages/email in your H700C bluetooth headset? I Blackberry use HS-655+ Wireless Headset which don't give me such prompts through my headset.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

My iphone font for typing and receiving emails is stuck in large font and I can not reset it to small

My font size for typing and receiving emails is stuck in large and I can not reset it using, settings, mail, font size buttons.

Jim, where were you when i asked the same question a couple of months ago?! After updating software two months ago my email font was stuck in large and couldn't get it to change. posted issue on forum, called apple support, went to genius bar, went to 1 to 1 and NO ONE could figure it out. Your solution is right on. You the man Jim!

I wonder to know what is the enterprise solution for windows and application event log management and analyzer

Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.

Consider MS System Center 2012.
Rgds

Can I have separate password for appstore and icloud email account?

Can I have other password for appstore and icloud email account? Me and my girlfriend have iphones and i would like to share my apps with her, but i dont want to give her possibility to acces my email account....

Well you can only have a different password if you are going to use a different Apple ID

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas

Hello Experts,
Pl advise if we have Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas.?
Any link or material for reading, please let me know.
Background - We are working on the scope to finalise processes for Small And Medium Co's for Downstream business in ECC 6.0.
Also advise how many and what kind of processes are involved related to P2P, Order to Cash and Finance.
Regards
Vinod Chincholkar

Hi Vinod,
i hope you can find the details in this link,
you can download the sloution overview brochure...
http://www.sap.com/industries/oil-gas/small/index.epx.
Best Regards
Satish

Annoture - Metadata Bridging Solution for Aperture and iView

Aperture and iView users:
I just released Annoture, a metadata bridging solution for Aperture and iView MediaPro! With Annoture, you’re just a click away from sharing metadata between these two popular image management and cataloguing applications. Spend more time working with your decisive moments than worrying about double-entry and incomplete metadata!
Annoture lets you transfer annotations from iView MediaPro catalogs to Aperture projects and albums and back. This two-way transfer of IPTC and metadata information means you are not tied to any one application for your image management and workflow needs. Annoture also features a modular interface that can be extended to support additional applications in the future.
http://www.tow.com/software/annoture/
Users of Aperture and iView can download a fully-functional version of Annoture. The unregistered version will occasionally display a reminder to register, and all images processed in Aperture by Annoture will have a custom “Annotated with Annoture!” tag added. You can remove these items with the full version after purchasing and entering your license code.
Enjoy!
-adam

Congratulations on getting this working and available so quickly! I bet many late nights went into this
It's definitely providing some motivation for me to learn more Applescript...

Unbelievable no solution for FMS3 and FLVPlayback???

I've spent the past 2 days scouring Google and dozens (easily over 100) websites
trying to find an answer to something that people do every day!
I am absolutely shocked that this info is not available anywhere online.
A simple FMS3 and AS3 and RTMP and FLVPlayback example....
totaly not simple and not possible to find!!
I try every possible combination:
import fl.video.*;
VideoPlayer.iNCManagerClass = fl.video.NCManagerNative;
myVideo.autoPlay = true;
myVideo.isLive = true;
myVideo.isLive = false;
myVideo.source = "rtmp://localhost/appName/videos/flvName.flv";
myVideo.source = "rtmp://localhost/appName/streams/flvName.flv";
myVideo.source = "rtmp://localhost/appName/streams/videos/flvName.flv";
myVideo.source = "rtmp://localhost/appName/flvName.flv";
none is working!!
i did not find any working simple solution for:
FMS3 and AS3 and RTMP and FLVPlayback
anywere on the web
only for:
FMS3 and AS3 and RTMP and Video and NetStream
if someone could bring "salvation" to this required important issue
i will be so thankfull
cheinan

Janaki L thanks a lot for your replay
i think i know where the problam come from
its from point number 8 in your raplay:
8. Make sure you have a publisher connected to your 'server' using the 'appname'
and streaming a live stream with the name 'streamname'
I thought i do not need a publisher to be connected to my appname in my server.
i thought FLVPlayback is doing the netConnection and start streaming the flv
that are already published and sitting on the server.
Is it not possible for the user that use swf with the FLVPlayback to make a netConnection
by ac3 code or some other wey and the FLVPlayback will use that connection to play the flv for that user
without third party connected publisher?
If not - maybe i can use HTTP to let the FLVPlayback play the flv for the user
but that bring me to other problem:
my localhost is at:
C:\inetpub\wwwroot\
the flv is at:
C:\Program Files (x86)\Adobe\Flash Media Server 3.5\applications\appName\streams\videos\flvName.flv
what will be the http url for the flv?

How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance. Of a sledgehammer, open the device and attempt to recover your files by force!???

How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance in Brasil. Of a sledgehammer, open the device and attempt to recover your files by force!???

Heat up the bottom rubber mat with a hairdryer for 5-10 minutes to loosen the adhesive, then pull the rubber mat away from the bottom metal plate carefully.
Then use a screwdriver to remove the 10-12 screws to open up the case.

Mozilla shows NOT RESPONDING until it loads the pages completely, for FACEBOOK and checking EMAILS on yahoo and google

Mozilla shows NOT RESPONDING until it loads the pages completely, for FACEBOOK and checking EMAILS on yahoo and google.
You can't do anything, you should just wait.

I'm getting a similar error over here. Sporadically some sites won't load specifically in Safari; they open just fine in Opera, Firefox and Camino though. This is really annoying.
It's pretty clear it's nothing network related…

I have a roaming email solution for iphone AND MacBook.....

for my mac.com email i'm using outgoing port 587... works on edge.. works on my RCN home wifi (which blocks port 25).
for my business email, i'm using fastmail.fm with outgoing port 587.. works everywhere. its an IMAP setup with good Mac support. i've been on Mailstreet, but i don't need their exchange server stuff any longer and they won't let me use an outgoing port other than 25
YAY! no more SMTP switching!
fastmail.fm also has great virus protection. comes highly recommended from many Mac nerds.
hope this helps someone.

Hey... Could you just pay for the outgoing smtp and use it with a different incoming imap?

Need OWA solution for Q10

Our IT department only supports OWA for remote access to email. Activesync is not enabled and will not be enabled. POP and IMAP are also not allowed. I upgraded from my Bold to Q10 and now cannot access email remotely. Why is there no solution for this Blackberry? Below is from KB03133. Why is blackberry assuming IT departments will have activesync enabled.
Note: BlackBerry 10 does not support integration of Outlook Web Access email accounts. However, most Outlook Web Access accounts will have Active Sync enabled. To determine if Active Sync is enabled and to confirm the settings, contact the IT administrator for the account.

All the IT departments I know of either use BES exclusively or they enable ActiveSync. There is no other solution I know of for BlackBerrys. BB10 was designed specifically with AcitveSync in mind.

Pls help putting together the BEST SOLUTION for PP and AE CS4

Hi guys
I was tasked to put together the best machine (machines) for video editing / rendering .. money is not an issue.
My client is a TV broadcasting network and they do lots of videos everyday .. They want to render their work as FAST as possible because sometimes they have tight deadlines and rendering and re rendering (if there are mistakes) has cost them .. so now they're serious about getting the best technology to achieve best rendering time possible, but in a bit of practical sense of course.. i mean there's no sense spending 1000USD or more for a piece of technology that offers under 10 second faster rendering only ..
What they do and want
- edit/put together/ sequence lots of videos constantly, under premiere cs3 (will upgrade to cs4 on the new machine)
- use affter effects for some effects and 3D stuffs.. but not that much.. but increasingly as time goes by and their video editors get more affter effects training..
- needs really really fast rendering!! Right now it takes them typically 1-2 hours to render stuffs, and what to cut this time by half or more..
Existing Setups on work stations:
Intel QuadCore (Q6600, i7, Q9550, Xeon x3220, and the likes)
4GB RAM DDR2 1066mhz
Highend motherboards
GeForce 9500GT , 9800GT, and GTX 260 216sp
GSKILL Falcon 64GB SSD Drive as primary
1TB Western Digital BLACK edition drives for storage
Software:
Windows XP 32 bit
Adobe Premiere Pro CS3 (80% of all their work done here)
AE CS3
etc..
Running NOD32 Antivirus
I am an somewhat of an expert in Hardware and stuff, i build custom PC's machines most of my life but i have limiited knowledge on optimizing hardware for VIDEO EDITING stuffs.. so i turn to you all.
I do understand that w/ video editing CPU is the most important, followed by RAM, and ofcourse by HDD for disc caches and stuff.. and where videocard may come to an advantage as well. and normally i'd suggest the fastest components available . i7 , extreme processors, skulltrail dual quad setups perhaps? RAID 0 SSD Drive? etc.. but I do not know w/c gives the most advantage, and w/c is a waste of money..
I also read about quadro cards offering really big performance improvements using CUDA tech etc..
again im not the expert at this type of requirment.. so i need your advises..
with unlimitted PRACTICAL budget given to me to come up w/ a solution I initially thought a rendering farm would be the solution, but upon reading around it seems there's no rendering farm solution for PP CS4.. just the adobe after effects part.. so i had to go back to the drawing board and suggest really powerful work stations instead..and perhaps have them migrate to 64bit OS for that "extra" performance.. i myself am on win7 64bit and it's looking mighty good.
1) is this the right move?
2) is it still worth it to put together rendering farm for AE renders only? or might as well concentrate funds on the machines/workstations?
Also along the PRACTICALITY LINE, would it be practical to maintain all the existing machines, and instead build a manned RENDERING MACHINE w/ PP and AE (basically desktop or Server if they are faster at rendering w/ the best specs for the purpose etc) where they can just throw the workload to some guy there for rendering? Atleast the editors can continue using the workstations while the rendering machine guy is at work? and even perhaps setup a gigabit lan network where the RENDERING MACHINES can dynamically pull the work load via the network , not needing to transfer the files to the rendering machine first ? etc
as you can see im not only looking for the best machine, but the best STRATEGY for my client.
Good suggestions would be much appreciated.
regards to all

in a nut shell no. if you do not have to "Share" then Avid is pointless Adobe is a far better answer.
Avid solutions still need a computer. The Mojo.Nitris are a joke and Avid no longer provides computers even the Symphany comes with your choice of Apple Mac Pro or HP 800. (Dual Xeon)
there are better "hardware" answers that what Avid sells for Adobe. Decklink, Aja to name a few.
if you have to share then you have no choice. this is the one area Abode does not lead.
renders have to do primarily with 2 things CPU power (Xeon will render faster than single i7)
and Drives. the faster your drive set up the faster the render. Memory does play a part and so does the video card depending on what codec and to what
it also depends on WHAT you are rendering and from what for the HDDs.
without knowing your work flow format and codec its impossible to suggest something.
in terms of rendering
Core i7
Dual Xeon (faster unless still doing DV/HDV thru firewire)
Sonnet raid array
Scott
ADK

SharePoint Online and POP email

I have a client who is interested in using SharePoint Online, but they are using pop email hosted by Rackspace. Can someone tell me if this will cause any issues with SharePoint, is there any limitation in SharePoint functionality when doing this? Would
email enable workflows still work with POP accounts. Also are there any issues with SSO and Federation with AD using SharePoint Online?
Thank you for the help.
Thanks in advance for your time. Steven

Hi,
The email address for users when used in a workflow is the email address set in SharePoint Admins User Profiles in Office 365. The field is called Work Email. This is automatically populated with the primary SMTP address of the user and mail is sent to it
if licensed for Exchange Online. Depending on the workflow, you should be able to send mail to external users, because the workflow when triggered will fall dependant on the permission of the user initiating the workflow.
No, there are no real issues with SSO (ADFS 2) or DirSync and SP Online... Just be sure to be mindful of deleting and recreating users, or stopping and starting sync because you could run into permissions issues within Sharepoint Online due to user guid
conflicts.
mark as answer if helpful.

Easy solution for Q10 and POP email setup

Similar Messages

Maybe you are looking for