Easy text Report.VI...not so easy

I'm using LV 7.0 and when I try to use the 'Easy Text Report.VI' I get this: Error -2147319779 occurred at library not registered. in font styoe.vi->set report font.vi->easy text report.vi->untitled 1. This error code is undefined. No one has provided a description for this code, or you migh have wired a number that is not an erro code to the error code input.
I would appreciate any help on this....tks

I am not positive what is causing the issue, but here is a list of things that may fix it. I understand some look strange, but I promise I have seen them fix issues.
1.Hit ctrl-shift-Run Arrow on the Top level VI to force a recompile of the hierarchy.
2.Open up the subVI (really a sub-subVI) called Font Style.vi. On the block diagram, in the upper left-hand corner, there is a property node. Change the property node to a different property, and then back to the original "TextFont" property. Save the VI.
3.Take a look at these links Error "-2147352573 Member not found in the xxx.vi" with NI Reports VIs in LabVIEW 6.0
f/websearch/2FCAAF080951FCAB86256982007AA16C?OpenDocument�> NI Reports Doesn't Seem to Be Working Pr...
4.Re-install LabVIEW
Evan

Similar Messages

Easy Text Report

Hello,
I try to print out a text with "Easy Text Report.vi".
After the "Set Report Margins.vi" there is an error: Menmber not found!
What´s wrong?
Thanks, Philipp

Hi Philipp,
I had the same problem, try this:
- In the Measurement System input of Set Report Margins vi connect a constant and set it to metric or US
- In the report margin cluster try to change the default values ( I set 10mm)
In my case this worked. This problem showed up only with LV6; LV5.1 worked fine.
Good luck,
Alberto

Easy text report in DLL causes LabVIEW crash

I was wondering if anyone else could shed some light on this problem (it's got tech support stumped).
To date I have two build machines and three target machines that have had the same problem. I build a DLL in LabVIEW that contains the Easy Text Report vi. I also create a VI that calls this DLL function to test it out. Everything works fine on my build machines. On my target machines, however...
On the target machine I put a call library function node on the block diagram and configure it for the LabVIEW DLL I created, select the function and setup the parameters to the function. Upon clicking on OK on the configuration window for the call library function node, my hard drive access spikes for some period of time (sometimes fractions of seconds, sometimes seconds); I assume the VI inside the DLL is being loaded into memory. I then get a Windows message stating that LabVIEW needs to be shut down at which point Windows terminates LabVIEW. Removing the Easy Text Report from the DLL VI eliminates the crash. Tech support has helped narrow this down a bit -- it seems to specifically be the print portion of the report generation VIs (they sent me a DLL that creates an HTML report which had no issues).
I'm doing this in LabVIEW 8.0. To make things more interesting, I have the same code in LabVIEW 7.0 and 7.1; neither of these have any problems. I've attached the code (LabVIEW 8.0) that tech support and I have been messing with.
Any thoughts or sugestions?
Tim Stahl
Attachments:
My DLL.zip ‏10 KB

Hi DougF,
It has been a while since I looked at this stuff in detail, so I will answer from memory.
There are a number of routines that must be present for the code to work correctly. The two I am thinking about are "CINDispose" and "CINUnload".
I suspect CINUnload is missing or buggy.
I hope this helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Executable and easy text report.vi

After reading some of the knowledgebase articles and the discussion grps it sounds like I am missing somethng when I create an exe and include "Easy Text Report.vi" in my LV2012 Project. If I run the exe in the admin window of Windows 7 the test results are printed out just fine. If I copy a shortcut of the exe file over to a user window on the same machine nothing is printed. Anyone know why????
Windows 7
LV2012
Thanks...
Solved!
Go to Solution.

Doing a quick search on the forums for that error gives a lot of information. I guess that error is what the print VI throws no matter what the problem is. You can try printing to pdf as the default printer and see if the error is still happening. Try changing the default printer to the one you are using. (Maybe the 2 logins have different printers selected as default). Someone who has experienced error -41002 might be able to explain more than I can... There is a knowledgebase that talks about issues with margins, but I don't know how much help that will be. -41002 KB A few other posts appear, but nothing that would explain the difference between administrator and users permissions.

Print easy text.vi doesnt work in executable

I have 3 target machines running labview 2012 on a PXIe8101controller. In my statemachine the vi prints out a report using easy text report vi ( on report generation pallet) at the end of the test. Its an executable vi on all 3 machines. On 2 of the machines it works fine. On the 3rd it hangs up when I'm logged in as a standard user. If I log in as administrator it works fine. The thing I noticed is that on the 2 machines it works on, the image is "factory..1.2.1f6" (under control panel>systems).
On the test equipment that it only works in admin mode the factory image is 1.2.4.f1. Also MAX is 5.3.1 on the one that runs fine and 5.5.0 f1 on the one that it doesn't work on. Anything I'm mssing?
Thanks.
Solved!
Go to Solution.

Maybe you can enlighten us with your solution so others may benefit. Unless it was just something silly. Then just say it was something silly.
Myself, I'd probably go ahead and post it, even if it was silly little mistake. At worst, it's a laugh on me - at best, someone else made the same boneheaded mistake I lived through and they don't have to walk in my footsteps.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How can I add the number of columns/row starting with the build in "Text Report" example in the LabVIEW

Hi All,
I am wondering how can I add the numbers of row and column from the existing build-in "text report"
VI ? If possible, would you mind showing me step-by-step because I am a new user and I am not familiar with the labview software.
Thanks

Hi,
Easy text Report is for saving to a file. Do you mean you just want to add the totals of two arrays and write that? In that case I would just append the totals before writing to file.
Jeff | LabVIEW Software Engineer

I can't append control image to report on 1 page with appended text report

I am attempting to create a report which is simply header, experiment information, and two graphs of data. I am using a Easy Text Report and Append Control Image to Report. I have successfully printed out this report, but on two separate pages. The header info is on the first page, and the graphs on the second page. This doesn't seem to be a margins problem, as the header is very brief and the graphs aren't that large either. I would like to make this into a one page report. Any help is greatly appreciated.
Message Edited by csmrunman on 01-15-2010 10:18 AM

Nevermind. I neglected to see the Append Report Text.vi. That solved everything.

Text data is not displaying at Report level for an Infoobject Item name

Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.

Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue.

Win8.1 Update 1 install was not an easy task. (Win8.1 Pro 64bit)

Win8.1 Update 1 install was not an easy task. (Win8.1 Pro 64bit)
KB2919355 Failed to install : 09Apr, 11Apr, 11Apr, 12Apr, 12Apr, 13Apr, 16Apr, 17Apr; succeeded: 17Apr.
After the first three failures I did an online search and found the following information:
According to a posting I found, when Windows 8.1 Update first fails to install, the original patch does not clean all leftovers, so all your attempts to manually deploy the new release will obviously fail as well. Andrew B recommends users follow the next
steps and then try to install Windows 8.1 Update manually.
1. Launch Command Prompt with administrator privileges
2. Run the following command: dism /online /remove-package /packagename:Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14
3. When step 2 is completed, run this command: dism /online /cleanup-image /startcomponentcleanup
4. Try to install Windows 8.1 Update manually
I followed these steps and tried both an online and offline installation a couple of times - without success. More searching resulted in more information:
from:
http://news.softpedia.com/news/Windows-8-1-Update-Installation-Fails-with-Error-Code-80070020-436577.shtml
1. Dism /Online /Cleanup-Image /RestoreHealth
2. SFC /scannow
The next attempt at installing Update 1 worked. I then checked the CBS.log file in the \Windows\Logs\CBS folder and found numerous comments that 'SFC /scannow' found many missing or corrupted files and took action to replace them. I was surprised that many
of the 'new' files were images and were in the \Windows\Web\Wallpaper\Themes1 or \Themes2 folders.
I had previously deleted all images I did not want as wallpaper - there was no option to unstall themes using Control Panel > Programs and Features > Turn Windows features on and off.
So, it appears that Win8.1 Update 1 expects to find 'everything' that was part of the initial/original installation still on the computer even though I "Took Ownership" of the original images and folders and deleted them. SFC /scannow may have
repaired/installed other files but that information was eliminated with the successful install.

Hi,
Thanks for your sharing on this issue.
The update 1 also change some UI designs, that's why it try to find all related files about theme and components to replace.
Kate Li
TechNet Community Support

EA4500 - not as easy to set up

Unfortunately the Linksys EA4500 is not as easy to "Set Up & Manage with Ease" as they claim. After trying to connect my Dell color laser network printer, which was working just fine with the replaced Dlink DIR-655 router, it turns out that the supplied Easy Connect Software does not allow non-USB or non-wireless printers to connect to the network. One must manually configure the IP address, according to the Cisco technical support manager. It is not a simple three step set up as advertised.
The Linksys technical support manager agrees that it is a good thing to warn people not to buy this router if one is expecting easy connection to their network. "It's out of my hands, how to support you to configure the Dell network printer to work with the Linksys EA4500 router." Linksys referred me to a third party, for a fee, to explain how to manually configure the IP address to connect a network printer to their router.
Numerous other features are not fully developed. Wait for this product to develop into a more mature product. This router is not ready for primetime.

The Cisco Connect software comes with the Linksys Wireless-N (E/EA Series) routers that let you manage your network easier. So first of all uninstall the older Cisco connect Software from the computer.. Then make the following connectivity:
The router’s power adapter needs to be plugged to your router and into an available power outlet.
If using a wired connection, the first Ethernet cable needs to be plugged to the computer’s LAN port into any of the router’s blue numbered Ethernet ports.
The second Ethernet cable should be plugged to the modem’s Internet port and the other end into the router’s yellow Internet port.
Ensure that you have no firewall enabled that may prevent the router from being detected.
After the connection install the Cisco Connect Software again… Here is the link for the same: http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=21463&userrole=Links...
Instructions to connect Network Printer with a Router
1 Set the router near the computer that is closest to your cable or broadband modem. Plug the router's electrical plug into a wall outlet but do not connect any other cables yet.
2 Put the installation CD that came with the router into the computer's disc drive. Follow the on-screen instructions to install the router's software on the computer. Install the printer's software on the computer if you have not already done so.
3 Connect an Ethernet cable from your modem to the port on the router marked as, "WAN" or "Wide Area Network." Connect an Ethernet cable from the computer to any of the numbered ports on the router. Open the Start menu on the computer and then click "Control Panel."
4 Scroll through the Control Panel options and then double-click the "Network and Sharing Center" icon. Click on the "Connect to a Network" link at the left side of the window. Find the name of your router in the list of available networks and click on it. Click on "Connect."
5 Connect an Ethernet cable from the Ethernet port on the printer to any of the numbered ports on the router. Return to the "Network and Sharing Center" window and click on the button labeled as "Turn on Printer Sharing."
6 Click on the "Apply" button to save the setting. Click on the "View Computers and Devices" link at the left side of the window. Click on the "Add a Printer" button when the new window appears.
7 Click on the "Add a Network Printer" button and wait for the computer to scan for attached printers. Click on the name of the printer and then click on "Connect."
8 Connect Ethernet cables from the other computers on your network to the numbered ports on the router. Repeat the process of connecting to the network, turning on printer sharing, and then adding the printer on those computers.

Easy Setups in folder, but not in Easy Setups window in FCP?

Hi all,
Just got my own copy of FCP, and have been tinkering around and getting familiar with the sequence settings, easy setups, etc.
I like the concept of the Easy Setups, however I noticed that not all of the Easy Setups from the "Additional Easy Setups" folder in my Applications folder (which came with the install) are visible in application.
For example, for one organization I edit for, we use a compact HD camera, a Canon VIXIA HF S200, which is AVCHD based, and we shoot in the XP+ setting (1440x1080) at 60i (29.97fps if you prefer).
When I did work on FCP6 there (I did not bother much with Easy Setups then) we'd be working with the appropriate sequence: ProRes422 1440x1080i60.
However in toying with these easy setups, the only ProRes 422 Easy Setup showing up is HDV-Apple ProRest 422 1080p24. However, the easy setups folder HAS a 422, 1440x1080, 60i easy setup config file, it's just not showing up in the app.
Worst comes to worst I'll just manually change the sequence setting because the sequence settings are there, I was just wondering If I had to "install" the additional easy setups or something so they actually appear as easy setups.
Again, no big deal, just was wondering if anyone knew, thanks!

Hi -
The "Easy Set-Ups" are a legacy feature in FCP from when tape based acquisition was standard.
Since you will be ingesting your HF S200 material via Log and Transfer, and making transcoding decisions there, the Easy Set Up you have chosen is not relevant.
Once you have ingested your clips, when you place/edit the first clip to a new sequence, FCP will prompt you to match the sequence settings to your source material settings - again, making the Easy Set Up not relevant.
MtD

Is there not an easier way to rate apps?

So I've seen the posts saying that I cab rate an app on my iPad in the App store, but is there really not an easier way? As I am understanding this, I have to basically search for each app one by one - apps I've already got installed - and then rate them from the app store. This makes no sense at all. A) The only easy access to rating an app is basically as you are first downloading it on your iPad. B) This seems to really devalue the usefulness of something like the genius match thing that will suggest apps based on what I like. Sorry, I am not going to search for each individual app then rate it ... I don't understand why it just won't take me there from the "purchased" tab ... or am I missing something?

Product feedback
http://www.apple.com/feedback/

Mac App Store -- why can't I 'gift' Mac Apps? Gifting specific apps in the iTunes store is easy. This is not the case on the Apple Mac App Store.

Why can't I 'gift' Mac Apps? Gifting specific apps in the iTunes store is easy. This is not the case on the Apple Mac App Store.

An alternative is to purchase an iTunes gift card that can be redeemed for apps in the Mac App Store.
Buy Apple Gift Cards, iTunes Gift Cards & iPhone Gift Cards - Apple Store (U.S.)
iTunes Store: How to redeem a code
You can provide feedback to Apple > Apple - iTunes - Feedback

I'd like to cancel the membership. Joining a member ship was EASY but canceling is NOT.

I'd like to cancel the membership. Joining a member ship was EASY but canceling is NOT.

This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Report is not getting displayed in ESS (ITS version)

Hi ,
I often create reports in ABAP HR and display them in ESS (ITS) .
But this time , report is not displaying the contents of internal table .I have first time used BAPIs to pass the values to internal table .
Is it the reason ??
Please help me in ths regard how can I make my report displayed in ESS.

Please make your transaction code as easy web transaction form SE93 and then try.

Easy text Report.VI...not so easy

Similar Messages

Maybe you are looking for