Easy to swap out the HDD on a Compaq Presario cq61-424sa?

I'm thinking about purchasing a Compaq Presario cq61-424sa.
One thing that's important to me is being able to swap out HDDs when they fail or when I want to try a different OS.
How easy is it to do this on the cq61-424sa?
Also I thought this might be a good test of how decent the after-purchase care is for Compaq machines.
Thanks for any assistance and advice.
This question was solved.
View Solution.

piece of cake:
Drive Manual

Similar Messages

  • What is the latest model of MBP I can swap out the HDD on?

    My late-2011 MBP is finally dying – I think the graphics card has come loose. Currently I have it working by forcing it to use integrated graphics only (as soon as I switch to dynamic the screen gets totally garbled and it eventually freezes up). Obviously not a permanent fix.
    So I need to swap it out in the next couple of days. I figure I may as well upgrade to a newer version, if my budget can handle it.
    Currently I have a ~1TB SSD in my computer. Ideally I'd like to just yank it from this computer and swap it into my replacement laptop. I know some of the newer ones make it difficult to switch out the HDD (and I'm not sure I can just use any SSD even in that case?). I'm wondering what the latest version of a 15" MBP is that I can just switch out the existing HDD for my SSD.
    Ideally I'd have two ports for monitors, since I currently use a ridiculous contraption to use my two external monitors. But if that's not possible, the HDD swapability is more important.
    Thank you all so much for your help!

    Yup, non of the ones there will have the old SATA drive. Only the 13"
    There is a Retina 15" there w/ 1 TB:
    http://store.apple.com/us/product/G0RD2LL/A/Refurbished-154-inch-MacBook-Pro-28G Hz-Quad-core-Intel-i7-with-Retina-Displa…
    "non-Apple supplier,""
    The disadvantage there would be the lack of 3 years of AppleCare.

  • Do I need to re-enable Core Storage after cloning and swapping out my HDD?

    I swapped out the internal hard drive of my mid-2012 13" MacBook Pro for an SSD. I'm very pleased with the performance gains so far — it feels like a whole new Mac. I cloned my HDD to the SSD before installing using Carbon Copy Cloner and I also created a Recovery partition using the same software. Now after doing the hardware swap, verything is working perfectly — no issues at all. Here's my question:
    I know that when I upgraded to Yosemite, my hard drive was converted from old-fashioned GUID partitions to the new Core Storage and a logical volume group partition. After the clone and hardware swap, I'm back to old-fashioned partitions, no more Core Storage. Do I need to manually re-enable Core Storage? (I've read about how to do this, and I feel confident I can follow the steps.) What are the benefits of this? Will a future Yosemite (hypothetical 10.10.3?) update put it back for me? Or is it fine to proceed the way I am now? I'm not currently using FileVault 2, which I know also uses Core Storage.
    Thanks.

    No, you don't have to convert to CoreStorage unless you decide to create a Fusion drive out of your SSD and HDD.

  • Swapping out the hard drive?

    Is it really THAT easy? It looks like it just slides right out after you remove the battery and the L bracket. I just got my MacBook yesterday and want to swap out the 120 GB drive for one of the 250 GB drives. I'm looking at either a Samsung Spinpoint M series or the WD Scorpio. I can get either at NewEgg for less than $200. Any thoughts are appreciated. I'm new on this forum from the G5 forums.
    Thanks

    Glad I could help. Thanks for the . Good luck with the wife:->

  • Is it possible for me to swap out the apple logo in the message screen saver with my company's logo If so, how? Thanks!

    Is it possible for me to swap out the apple logo in the message screen saver with my company's logo? If so, how? Thanks!

    How long will my iPod service take?
    If you choose to use the Online Service Assistant, or service via Apple Technical Support: If your iPod is not personalized, you can expect service to be completed within approximately one week from the time you send your iPod to Apple. If your iPod is personalized, you can expect service to be completed within approximately ten calendar days from the time you send your iPod to Apple.
    Attention iPod shuffle customers: Service for iPod shuffle is performed by means of an express replacement program, via Online Service Assistant or Apple Technical Support. For more details, please review the Express Replacement Service tab on the left.
    Above from:
    Apple - Support - iPod - Service FAQ
    If it is caused by a hardware problem there is nothing you can do to prevent it from recurring unless it was caused by abuse like from dropping the iPod.
    Otherwise make sure you ask apple how they fixed. it.

  • Can I swap out THE G5 harddrives

    I have a Dual 2.5 GHz PowerPC G5 with a ATI Radeon X800XT card (AGP). I looking to buy a G5 QUAD 2.5ghz with a Nvidia Quadro FX 4500 (PCI. I know I need to change the Graphic card Plug-in. But Could I just swap out the hard drives.

    Could I just swap out the hard drives.
    Yes.
    (48127)

  • IPhone 5 - Can I swap out the sim card to use in China?

    Can I swap out the US Verizon sim card in my iPhone 5 to use in China with a local Chinese carrier?  What needs to happen?
    Thanks,
    Dxeph

    Nicholas,
    Thank you for the quick response!

  • Is there any way to swap out the 'Widget Note' icon or have it triggered?

    Hi,
    Is there any way to swap out the 'Widget Note' icon?
    Not only is it bad artwork, I have a cool custom button that I wanted to bring up the Note widget. Also, when I put the Note Widget on top of my custom button, it blocks the button's glow for the mouse over state, wven when I choose the option of making the widget transparent.
    Any way my custom button could trigger the Widget Note to launch?
    Any help would be much appreciated.
    cheers

    Hi digitalnoob
    To use your custom icon image instead of default Note icon, you would have placed your image on top of the "transparent" widget.
    To make these objects available on click of some button:
    Group these two objects.
    Make this group invisible in output.
    Add the button which should trigger this widget.
    On the button, set the action to Show this group.
    To hide this group on 2nd click you need to use some advanced action and variables. Else, you can have a different button to hide this group.
    Sreekanth

  • Compaq Presario CQ61 - New WD3200BPVT HDD - Capacity incorrect

    The original 320gb Hitachi Travelstar HDD died in my Compaq Presario CQ61.  I have just replaced it with a 320gb Western Digital Scorpio Blue (WD3200BPVT).  Using my original Windows 7 recovery discs I have now got the notebook up and running. 
    However, my issue is that explorer says that the capacity of my new disc is 67.9 GB.  Where has the other 250GB gone and how do I get them back ?

    Possibly this is partitioned or not partioned at all. I would strongly suggest to call the tech support and run the recovery process one more time with them on the phone. 

  • I would like to increase the ram to the maximum that my compaq presario cq57-450ea notebook will all

    I would like to increase the RAM to the maximum that my Compaq Presario CQ57-450EA Notebook will allow, it currently only has 2.00GB.
    I would be most grateful if you could provide me with the information, including any product code so that I may order the correct item which is compatible with my machine.
    Regards Rod
    This question was solved.
    View Solution.

    Hi
    Please find the link given below might help you.
    Compaq Presario CQ57-400 Notebook PC series - Specifications
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • My compaq presario CQ61-420US ONLY STARTS UP half way. How can I get it started all the way?

    my compaq presario CQ61-420US ONLY STARTS UP half way. How can I get it started all the way?

    Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hard drive & memory.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • HP/Compaq Presario CQ61 wont start up or charge, only the side charging light is on.

    I have a major problem with this Laptop Compaq presario cq61. I had to fix the cpu fan and after putting back the parts laptop i came to know it wasnt turning on.It is not even charging. only one charging light is lit, (the one on the right).when i press the power button the power light starts blinking and the light in the button too, and after that the charging light blinks three times and then stops. I opened the laptop again to check if i missed to put back a wire or something,but everything seemed fine. Please help me with it, because i have all my important data in it.you can also send me an email at [Personal Information Removed]

    @Captain_A ,
    Hello and thank you for posting on the HP support forums.  Here is a link that will help you understand the blink code you are seeing.
    Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot
    I hope this will help you with your issue.  If you need further repair support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thank you again for posting. Have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Can you swap out the logicboard of an older model mac for a newer one?

    So i just bought a mac on ebay, its in good working condition, however i was wondering if i was able to swap out an older model logicboard for a new one.  The mac i currently have is a unibody mac, MB466LL/A, and the logic board i was looking to possible switch it out with would be the (Logic Board 661-6158 820-2936-B.)  Let me know if this is possible.  Work on computers often and have built many pc's so that aspect will not be a problem, im just wondering if this request is feasible.

    Yes, its possible.
    Step one: Buy a second, fully working MacBook of the model you want.
    Step two: Sell the first MacBook you bought.

  • If I have a bootable copy of a disk running 10.4.11, is there any reason I can't swap out the internal drive of a newly purchased Mac Pro and have it boot from the tiger disk? Thanks very much for any insight.

    or is there some sort of built in protection against this.

    In addition, if you are talking about an older machine like a G4 or earlier with PATA drives, the Mac Pro uses SATA drives, so this is not a simple swap out, but if there's room an adapter like this might work in that situation: 
    http://eshop.macsales.com/item/Sonnet%20Technology/TPASA/
    so that you could use the drive in the new computer to copy the data files, not for booting the OS.
    If you need to transfer files from one machine to the other, you could do this over a network, or use FW target drive mode, or get a universal bare drive cable adapter.
    http://eshop.macsales.com/item/Newer%20Technology/U3NVSPATA/

  • HT1688 I have a damaged I-Phone and I need the contents of my calendar off of it. I did not have Mobile me at the time.  Can I swap out the sim card from the broken phone to a new phone and recover this calendar?

    I have an older I-Phone (3G) that for some reason the body of the phone has split in two.  This phone was a business phone and it had a lot of important information on it. I have a second phone that is also a 3G.  On the broken phone there is a lot of important information that I need in my calendar. Im not worried about anything else but the calendar.  I didn't have the Mobile Me account at that time or I would be having this problem. Does anybody know if I can ust switch out the sim cards. I just need to recover the old calendar, so im hoping that the calendar will transfer when I switch the sim card into the good 3G. If that doesn't work does anybody know of anyway that I can retrieve this information off of this phone?

    Nothing is stored on the sim card on an iPhone.  If you backed up to your computer the backup will contain your calendar events.  Otherwise, if your phone isn't functioning there is no way to back up or extract your calendar at this point.

Maybe you are looking for

  • One apple ID on my and child's iPad. How do I keep apps separate?

    Is there a way I can sync my apps purchased from my iPad and iPhone with each other without getting the apps from my child's iPad mixed in as well?

  • CWIMAQView​er toolbar not showing all the tools at run time

    Hi I'm using the cwimaqviewer control to display images acquired from a CCD camera.  I set the viewer's ShowToolBar property to true.  All the toolbar items showup fine at design time.  However most of them go missing at run time.  See attached photo

  • Repeating email in my Drafts folder

    I have been getting the same email showing up in my Drafts folder for several weeks now.  I have repeatedly deleted it, including emptying the Trash folders, but it keeps popping up.   This was originally a response I sent to an email that was sent t

  • Migrate from G4 to new Macbook.. Not your typical question

    Good morning. My wife was using an iBook G4 for some time. Our 13 month old grandson one day made a quick move and pulled on the display, pulling it towards him. The machine now only shows a grey/white screen when booting. It sounds like it is starti

  • Public folder-how to lock a model

    Hi I need to have my models available for more than one person to modify, but I also would like to lock this model while one person is making changes. Is that possible? Can I assign permissions to one model in VC? Thanks