Easy way to add a cross disolve to multiple clips???

There has to be a trick to this? They could not make it this manual that you need to do every one. I have figured out how to copy and paste,,... but... this does not always work? And then you have to do each one if you have 100 clips it takes 100 pastes.
The same with fade in and out to black filter and same with audio fade in and out
One would think you could drag the filter to every clip in the seq and it would be smart enough to add the disolve to front and end...
This is driving me nuts HELP!!!!!!!!!

I've got a multiclip timeline edit done. I've got all my cut points and I want to add the same crossdissolve to all the edits. I can click Next Edit (' ") and Command-T to keep adding the default transiton but I'd rather highlight them all a just do a one click soultion. Any Ideas?

Similar Messages

"Easy" way to add a text string Flex default pre-loader?

Is there an easy way to add text (company name for example) to the top of the default Flex pre-loader?
Thanks.

Sure,
http://www.flexer.info/2008/02/07/very-first-flex-preloader-customization/
Johnny
Please rate answers.

Is there an easy way to add a sketch to Apple Email?

I struggled with a new-to-me sketch program that I found on an Internet website, but I was finally able to copy and paste it to an Email message. It was supposed to have been easier than that, but that was the best I could do.I then realized that I had to add a few lines and notes. That got me to thinking. By now, you'd think that there would be an easy way to add graphic material to Apple Email. Is there?
I have an iMac.

Closing for lack of response

Is there an easy way to add a location map to Pages?

Hi,
Using the latest version of Pages, is there an easy way to add a location map?
Many Thanks
Simon.

Are you trying to copy an image from the Maps application?
If you are, the easiest way I have found to do this is by going to Edit>Copy in Maps and then pasting the image in the Pages document.

Is there an easy way to add a desktop shortcut for all users?

Looking for an easy way to add a shortcut to an app for all users.

William is correct. There are global system settings, and then there are personal user settings. Adding a shortcut to the desktop, or more commonly the Dock is a personal setting.
Unless its in some kind of mass deployment scenario where you can create a pre programed image for large amounts of computers which has it already has your app shortcut setup, its easier to just do it one user at a time.

After editing images in Aperture, I want to overwrite the editing to an external drive. Is thee an easy way to "add" the new work without the long process of backing up the whole library.

After editing images in Aperture, I want to overwrite the new editing to a backup external drive. Is there an easy way to "add" the new work without the long process of backing up the whole library.

But the Library is not a program. I use SuperDuper, and it is smart enough to treat Finder Packages (such as the Library) as a whole bunch of files and folders, and overwrites only those that have changed. Can't CCC be set up the same way?

The Magnetic Timeline changes my timing when I add a cross disolve.

I am enjoying the FCP X but I am having a serious problem that I can't seem to shake. I am woking on a music video where I have a clip above my storyline that I want to fade in and out of view. In FCP 7 I could put the video in track 2 then add a cross disolve to the track and bam I have got a fade in out for the clip. My problem in FCP X is as follows:
1. I have a long clip in my main story line that is timed with music so it cannot be moved.
2. I have a daughter clip above it that is croped to be a partial frame.
3. I create a compound clip from the piece of the main storyline and the daughter clip.
4. I add a Cross Disolve from the transitions menu.
5. Now the music track is longer than the storyline, because the magnetic timeline litterly shortened the storyline.
I also tried making the daughter clip it's own storyline and still the cross disolve transition physically shortens my timeline rather than using the handles of the file. I have litterly hours on each side of the clip so it is not that. Any ideas or am I stuck keyframing to death.

I tried the new story line, but it still will take the edit point of my blade cut in the clip and treats it like the very begining of the file rather than some where in the middle. Maybe I am blind, but here is the problem as it stands in my mind:
When you use the blade tool in FCP X to cut a clip it treats the two pieces like whole clips that have no handles. In FCP 7 when you cut a clip with the blade and copied it, it still knew that it was part of a larger clip and would go back in time to find handle info for transitions. FCP X seems like it can't do this which means it trashes my timing in order to make handles.
If you can solve this riddle that would be great. It almost feels like a program flaw that will have to be solved in an update. Empisis on SOLVED in an update! (Just in case apple is reading)

How do I add a video effect to multiple clips in my timeline at once?

How do I add a video effect to multiple clips in my timeline at once?

or... you can command click to select all the clips you want to apply the effect to, then double click the effect in the Effects browser. (PS - you can't simply drag and drop an effect on multiple clip selections, the effect will only be applied to the clip you drop it on -- but double clicking the effect will apply it to all selected clips at once.)

Easy way to add more audiotracks??? + Environment midi/audio question???

Hi!
Let's say, when I open a new project I have standard 24 audio tracks.
But when recording I see that I will need more, is there an easy and fast way to add more tracks?
As I see it now, I Have to run the Logic Setup Assistent, add more tracks (let's say 40). Reopen the project, go in the environment, create a new audio object for every track I want to add, double click it and assign the correct track to 'channel'. If I need to add 10 more tracks I have to go over these last steps 10 times. Am I missing some handy quick trick here?
Also, the second part of my question:
when I open the environment window, sometimes it only shows "midi" and the "GS instrument drum mapped" and some other times it shows "audio" and an "overview of my mixer". This seems to happen at random and I don't know why. The mixer view is what I want (especially when I need to add tracks as mentioned before), but when I get the midi view I don't know what to do to get the audio/mixer view. Any help?
Powermac G5 dual 2,3 - 1,5Gig ram Mac OS X (10.4.3) Logic 7.1.1 / M audio Ozone / BCF2000 / Drumkat 3.8

Ok,
There is a way so you wont have to do the 10 setups.
Run the Setup Assistant and when it asks how many
audio tracks you want, always tell it more than you
will possibly need. I use 101. I know I will probably
never use that many but they are already and waiting
in case I do need more. This way you dont have to do
anything except go to the track menu and select create
new or double click the arear below the last
track and what ever track is highlighted, a exact duplicate
will appear. Then you just click and hold on it to make it
whatever kind of track you need from the menu that appears.
This first answer takes care of the second question. Since you
dont need to go into the enviroment to hook up new tracks.
Just so you know if you click and hold on the name of the layer
Midi, instruments, clicks and ports or whatever another menu
will appear letting you choose what layer you want to go to.
This is the easy way!

Why isn't there an easy way to add a photo to photoStream from the finder?

Apple makes it easy to share your photo with Twitter, FB, Flickr, etc. Why not Photo Stream? As far as I know, the only way to add a photo to photo stream is to open iPhoto and then add the photo to that. This seems to be a very poor way of quickly adding a photo.

If you have a suggestion make it here: Apple Feedback. This is the wrong venue.

Easy way to add doc dimensions to slug area?

Does anyone know of an automated way to add the documents dimensions to the slug area? I've tried searching around but haven't found any results more recent than 2009. I'm using CS4.
Thanks,
Mel

Sure,
http://www.flexer.info/2008/02/07/very-first-flex-preloader-customization/
Johnny
Please rate answers.

A quick and easy way to add genre to songs in a playlist

I have a 160mb classic ipod and I want to shuffle only a portion of my total library tracks. I am thinking the best way to do this is to use the Smart Playlist function and shuffle by genre. But if I do that I want to change the genre label or add one to many of my 4000 songs. Is there anyway to do this easily? I tried to select every song in a playlist and right click and use Apply Sort Field, but unfortunately genre is not one of these fields! Any idea?
Or (although this may be the wrong forum), is the any way, short of making one gigantic playlist, to get my iPod to shuffle among just certain playlists?

The only way to add to files to a playlist on the player itself is to put them in the queue, then save the queue as a playlist.

PSE10: Is there an easy way to add a vignette?

Besides using Filter > Correct Camera Distortion, is there an easy way to put a vignette on a picture? The method I just named doesn't give me the smooth, uniform fade that I need for creating collages, etc. Thanks!

Sure, just use any selection tool to make your selection. Here, I simply used an elliptical selection:
Then, use Select...Feather to feather the selection. I used 10px. Hit the Ctrl+J keys to copy that feathered selection to a new layer with a transparent background:
Ken

How can I/Is there a way to: apply a preset effect to multiple clips?

I will be editing a music video from this weekend in Premiere Pro CS4, is there a way I can paste a custom preset to multiple clips (selecting hundreds) without clicking each one and pasting/dragging?
If this can be done it's going to save me hours and hours of work!
If I try at the moment by CTRL clicking a few clips is only pastes/drags into 1 of the clips, not all of them!
any help would be appreciated

Yes, see the section
Copy and paste clip effects and
Apply effects to clips in the Premiere Pro Help.
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ

Easy way to add a single keyword to an image?

I just organized a bunch of photos I took at a birthday party, and ran into some awkwardness when keywording. Hopefully it's just user ignorance, but if not, maybe someone can offer a workaround. I did the import with no keywords, because I wasn't thinking. Once I'd done that, I selected all images in the "Last Import", hit Ctrl-K, and typed Birthday (which is one of my standard keywords). Then I deselected all images and started doing selective keywording. That's where it started getting awkward. I had several shots that had my son in them, so I selected all of them and hit Ctrl-K. This put my cursor in the keyword box in the right-side panel, with Birthday highlighted. I hit <End>, then typed comma and MySonsName. No problem so far. I delselected the shots and selected the ones that had my daughter in them. The right-side keyword panel now showed something like "Birthday*, MySonsName*". I wasn't sure whether I could just add MyDaughtersName to the images without actually adding MySonsName to all selected images (even those without my son in them). That's the awkward part. What I found was that in order to add a single keyword to a bunch of images at once, I had to enable Keyword Stamping and use that. An alternative was to "Set Keyword Shortcut", enter the keyword, select the images I wanted, and then use "K" to add the shortcutted keyword to the images. Is there any way to simply say "add this keyword to all selected images" in one atomic action? In other words, hit a keystroke, type the keyword, hit Enter, and it's now applied to all selected images. -- Rob Freundlich "Males ae biologically driven to go out and hunt giraffes." - Newt Gingrich "Some folks you don't have to satirize, you just quote 'em." - Tom Paxton

<[email protected]> wrote in message news:[email protected].. > In the right hand keyword pane the list should show something like "birthday, > *sonsname". The * means that the keyword isn't >applied to all the images. > > To add your daughter's name to the selected images, just add it to the end of > the list and press return. As long as you don't >remove the * you won't apply your son's name to all the images. if you do >remove the *, then you will. Sweet. I'm a programmer, so I thought the * meant multiple images, not "not all images", so I didn't even think of trying that. Works like a charm, though. Thanks! -- Rob Freundlich "Males ae biologically driven to go out and hunt giraffes." - Newt Gingrich "Some folks you don't have to satirize, you just quote 'em." - Tom Paxton

Easy way to add a cross disolve to multiple clips???

Similar Messages

Maybe you are looking for