Easy Way To Have Several Tracks End at Same Time?

Let's say you have 4 tracks of strings, and their final notes end at slightly different times. Is there a quick command for ending them all together?'
Thanks
Tom

Either select all your Midi regions in the Arrange and then open the piano roll which will display the content of all regions - then align all the notes using your mouse
or
use the scissor tool - select all regions in the Arrange and cut them at the point you want them to end - this will of course only work if you cut before the endpoint of all notes
I don't know of a "quick command" but the methods described shouldn´t take too much time

Similar Messages

  • How do i copy several tracks at the same time in Logic Pro or is there a way to set multiple loops in one song?

    For example in an AABA song format, do I have to record the 3 As and then do another to fade out and end?  Seems like it would be much easier to create the part once and tell LP how many times and when to repeat each part.  HELP!!

    Do you have to copy each track separately? It would be much easier if I could select all the tracks together for copying/pasting.
    You cannot select multiple tracks in LP9, but you CAN select multiple regions. Use Shift-Click to select the parts on the tracks you want to copy, then hold the "option" key and drag them to the new position. This will create a copy at the new position.
    Let's say you have tracks for piano, drums and bass. In the arrange window, click on the 8-bar "A" part for piano. Hold shift key and click on the drums region then again for the bass region. All three will be selected. Now hold the option key and drag all three sections to the right to place them on bar 25.
    Also, how do you specify that you only want to loop X times? I can get a perpetual loop but I have to turn it off to get it to stop.  This is very inconvenient when I'm playing.
    You can control looping in a few ways.
    1. Go to a region that does NOT have looping checked. Click near the TOP RIGHT of the region in the arrange window. Drag to the right to specify where the looping will stop. This is tricky... if you click too low, it will extend the length of the region. You must click the correct spot near the top to control looping.
    2. For a region where looping is checked, go to the end of the region in the arrange window (at the end of the song) and do as #1 above. Drag to the left until you reach the point where you want the region to stop looping.
    3. Use the "pencil" tool to create a blank region where you want the first region to stop looping. If your 8-bar verse is repeating once, create a blank region at bar 17. The first region will stop looping there.
    Hope this helps.

  • Is there a way to import several tracks at once from my Boss BR8 so that they show up as separate tracks in GarageBand?

    Is there a way to import several tracks at once from my Boss BR8 so that they show up as separate tracks in GarageBand?

    I had to google your device - looks like it's a vintage multi-track recorder that records to Zip disks. So I guess there's no digital USB or Firewire multichannel output and no way to transfer your tracks digitally - or is there? If not, your only option is to record the device's audio track by track into GB.

  • Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

    Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

    Thanks for responding. Everything seems to work right except for the when I plug into the 737. Ok let me see if I can be more clear. I had this set up done with two representatives of Neumann, and DBox. Here it is I hope this helps. 32 Channel snake (24 Inputs 8 outputs) Channels 1-8 from snake to my Octopre for Drums. From Octropre output quarter inch lines into the Apollo 2, quarter inch input. This is so that the Apollo 2 is taking the drum tracks. Snake Channel 9-12 into Apollo 1 channels 1-4 xlr. Snake Channel 13-16 into Apollo 2 Channels 1-4 xlr. Snake Channel 17 into the 737, output of 737 into Channel 5 of the Apollo 1 quarter inch.
    Ok The Dbox. Sum output L&R into channel input 7&8 of Apollo 1. Apollo 1 output channels 1-8 into summing input channel 1-8 of Dbox. Apollo 1 main L&R going to main analog input L&R of Dbox. Spid out to DAW input of Dbox. I have both ADAT of both Apollos connected by optical wire. Also have port 2 of Apollo 1 into port 1 of Apollo 2 connected by Firewire.  Let me know. Hope I got it right. Thanks for responding.

  • Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track.

    Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track. i don't know if anyone has the same problem, but i haven't sync my ipod touch 4 gen to my i-tune playlist for the longest time, cus i was afraid to transfer the problem to it since i have a pc (win 7) but not MAC.

    i am sorry, guys, but  I really really really need you guys' help. if u know ANYTHING...

  • In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

    In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

    scottiewade wrote:
    Thanks. I know how to select multiple tracks in the mixer, did that and put on group clutch,
    Hi
    Wrong..
    To assign tracks to a group, click in the dark gray box just above the automation (Read/Write/Off etc) on a channel strip, and select the group number you wish to use. The first tim eyou assign a group, the Group Setting swindow will appear automatically, thereafter you need to click on the group area and choose 'Open Group Settings'.
    Make sure that you have turned off Group Clutch (this disables all Groups)
    Maybe this will help
    http://support.apple.com/kb/VI248
    CCT

  • Is there a way to see or play two video tracks at the same time?

    I have video shot using two cameras at the same event.  If I take the video and put it in a sequence, say video1 and video2, how can I watch both tracks at the same time so I can edit them?  I tried using multi-camera monitor and have that show video1, while watching video2 in the right hand panel, but it doesn't work very well.  By that, I mean the multi-camera monitor does not play at the same time.  Instead, it stops, then when I play the other monitor it is still until I stop the other one.  Then, it "catches up".  If I play the multi-monitor, the other one is still until I stop the multi-cam monitor.  So, anybody have a better solution that I can use where they both play at the same time?
    BTW, my hardware is brand new and I have a 6-core i7-3930K processor with 16 GB of memory, so I don't believe the problem is with my hardware not being enough to run PPro 5.0 correctly.

    "adobe multicam tutorial"
    http://tv.adobe.com/watch/short-and-suite/multicam-sync-and-editing/

  • On my iPod touch, in my music library, I have 2 tracks of the same song on a few of the albums. How do I delete the second track of the song?

    On my iPod touch, in my music library, I have 2 tracks of the same song on a few of the albums. How do I delete the second track of the same song?

    Hey glocster,
    Thanks for using Apple Support Communities.
    Looks like you have a song you want to remove from your iPod. This article tells you how to delete content from a lot of places.
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    iPhone, iPad, or iPod touch
    Tap the Music app.
    Tap the Songs category.
    Swipe left over the song you want to delete.
    Tap Delete.
    Have a nice day,
    Mario

  • Help Please.  I am setting up my macbook pro for a second user but office didn't transfer over.  Is there a way to have additional users on the same comp have office available without having to re-install it for each user?

    Help Please.  I am setting up my macbook pro for a second user but office didn't transfer over.  Is there a way to have additional users on the same comp have office available without having to re-install it for each user?

    mpr130 wrote:
    Help Please.  I am setting up my macbook pro for a second user but office didn't transfer over. Is there a way to have additional users on the same comp have office available without having to re-install it for each user?
    How did you attemp to transfer Office?
    OS X Lion: Set up a guest account

  • If I have two appointments at the same time, they overlap in the iOS 7 calendar rather then appearing side-by-side so that I can't read one of them due to the identical colors of the two appointments.  Is there any way to fix this with a setting?

    If I have two appointments at the same time, they overlap in the iOS 7 calendar rather than appearing side-by-side in the daily view, so that I can' read both of them due to the same background color.  Is there a way to change this via a settings change?

    I fyou have "all day" event that are taking up the entire day, check the event. All day event only appear at the top of the time line (and just below the week view). I suspect they are not actually set up as all day, but have specific time frames assigned.
    In teh screen shot below, "Sample" is an all day event; NFL: CAR@SF is not.

  • Display several bookmarks at the same time in Maps?

    Hi.
    Does anyone know if it's possible to display several bookmarks at the same time in the app Maps on an iPad (mini) under IOS 6.1.3?
    Thanks.

    Do you have to copy each track separately? It would be much easier if I could select all the tracks together for copying/pasting.
    You cannot select multiple tracks in LP9, but you CAN select multiple regions. Use Shift-Click to select the parts on the tracks you want to copy, then hold the "option" key and drag them to the new position. This will create a copy at the new position.
    Let's say you have tracks for piano, drums and bass. In the arrange window, click on the 8-bar "A" part for piano. Hold shift key and click on the drums region then again for the bass region. All three will be selected. Now hold the option key and drag all three sections to the right to place them on bar 25.
    Also, how do you specify that you only want to loop X times? I can get a perpetual loop but I have to turn it off to get it to stop.  This is very inconvenient when I'm playing.
    You can control looping in a few ways.
    1. Go to a region that does NOT have looping checked. Click near the TOP RIGHT of the region in the arrange window. Drag to the right to specify where the looping will stop. This is tricky... if you click too low, it will extend the length of the region. You must click the correct spot near the top to control looping.
    2. For a region where looping is checked, go to the end of the region in the arrange window (at the end of the song) and do as #1 above. Drag to the left until you reach the point where you want the region to stop looping.
    3. Use the "pencil" tool to create a blank region where you want the first region to stop looping. If your 8-bar verse is repeating once, create a blank region at bar 17. The first region will stop looping there.
    Hope this helps.

  • Downloading several folios at the same time ?

    Hello,
    Does anybody knows if it would be possible, inside a custom viewer, to download several folios at the same time?
    Thanks,
    Christophe

    Yeah -- you have 4 separate tracks with the same audio? Select all 4 tracks/clips in your Event and select Synchronize Clips. You end up with a compound clip in the event with all 4 clips synchronized to the audio. Open the compound clip in a Timeline and select all 4 clips. Use  Video > Transform and type in ~48% (if you want the "gutters") to resize all the clips at once. With the transform icon (lower left corner of the canvas) selected, drag each of your clips out to the four corners (or type in exact position values in Video > Transform > Position parameters.) To get the white background, you can use Generators > Elements > Shapes - set the color to whatever you like; select Rectangle from the drop down and Video > Transform > Scale to expand it to full screen. Drag the generator underneath your storyline to use as a background.
    If you don't have audio to synch to, you can create multiple storylines. Add the first clip; reset the playhead and select your other clips that will appear in a 4-up and type Q to *connect* them to the storyline. Then select each one separately and right click > Create Storyline (or type command - G). You can then open each storyline in its own timeline (right click and select Open in Timeline) and append more clips to each "track". Back in the main storyline, drag out each connected storyline to reveal any appended material. The trim control will turn red when you reach the end of media in the created storylines. Resize and arrange as described above.

  • Can I change all the outputs on all the tracks at the same time?

    When switching from my home with my interface (output 3-4) to somewhere else where I don't have my interface, I have to change each track individually to output 1-2 so I can hear it. It takes forever because I have several tracks. Can I do them all at the same time?

    with the mixer window open, highlight all the tracks, you do this by clicking and dragging over all of them, or hold shift and select each one. now your tracks will be temporarily linked.. and what ever you do to one track will effect all of them. Cheers.

  • Scanning several photos at the same time

    Is there a way to have several photos or items on the scanner and have them scanned as individual items rather than one composite image?
     I am using the HP Photosmart 5510 and am running Windows 7 Ultimate

    Hello there @anncognito ,
    Thank you for joining us on the HP Forums today, hope you enjoy your time with us!
    I understand you are using the HP Photosmart 5510 with Windows 7 Ultimate. You are wondering if you are able to use the detect separate images software HP offers to have the printer scan multiple blocks of images loaded on the scanner glass at the same time.
    The simple answer to your question is yes. If you have the most recent software available for your HP Photosmart 5510 than you will be able to load different images on the printer scanner and have them scan separately. Once you get into the "Advanced Picture Settings" you should have the option to select your appropriate option.
    This picture illustrates what you will see. Let me know if you need any further help! Look forward to hearing back from you!
    I worked for HP.

  • How can I export several versions at the same time?

    Greetings -
    I'm looking for something that I may just be missing, and hoping someone here can point me in the right direction.
    Basically, I'd like to be able to select an image in my library and export several versions at the same time. For example, I select a photo and export JPG, TIFF and PSD versions in one shot without having to run three separate export requests - essentially a batch action. I can't imagine that this isn't built in already - I'm just assuming that I'm missing something obvious.
    Thanks in advance for any advice anyone might have.
    John.

    Fwiw, I've not seen this requested before.
    This kind of Export option is very typical, Kirby, when the rendering of the exported version will take a long time, for example for video or audio. Then you can share several formats at once, to render a version suitable for the web, for viewing on the computer, or the iPhone at the same time. That is really useful, if you render a movie at a full HD resolution and don't have to do it again for an iPhone/iPod version.
    QuickTime 7 does this for the "File > Export for Web" option, for example. You can get three versions of your final movie at the same time.
    And I just checked, the new iMovie Theater does this as well, when sharing a movie to the Theater:
    When you add a movie, trailer, or clip to the Theater, iMovie creates versions of your movie tailored for local playback, playback on an iOS device, and streaming.
    Come to think about it - exporting a webpage from Aperture will also export thumbnail sized images plus a larger version for downloading.

Maybe you are looking for