Easy way to intall apps

Hi,
I'm planning to install apps to learn but noticed lot of people mentioning problems with install on Windows ( like required the 3'rd party tools etc).
Is it straight forward on Solaris ? I have both Win 2003 and Solaris tetst severs available. Which one would be easier to install and learn ?
If someone has any white paper for installing apps please email it to me.
Just to give you my back ground, I've involved in install/admin of Oracle db/ ias on Nt and solaris before.
Thanks in advance,
Asha

Asha,
I will suggest you to go with Solaris. Its much more straight forward and easy on solaris
documentation is also avialble for same...
do let me know if u face any issue.
Yogi
[email protected]

Similar Messages

Is there an easy way to arrange apps?

I just had to restore my phone from backup because of an error in updating the software and now I have an empty phone! I chose the option to restore from backup and the backup I used was from 45 minutes prior. After running this restore, there were no apps on my phone! I would think that restoring would put everything back the way it was at the time that you last backed up, but apparently not.....
Now, my problem is organizing these apps. I have 206 apps on my phone. I have been getting these for almost a year now and organizing them into folders as I purchased them, so I never had more than 3 pages on apps on my phone. Now if I synch these as they are showing in iTunes, I will have 15 pages of apps! I spent two hours going through in iTunes to just get it down to 10 pages and finally gave up. It is so hard to move apps from page to page or to create folders in iTunes. Actually creating folders isn't the problem, it's next to impossible to rearrange apps on a page! I try to move an app to switch the order and I end up creating a new folder. Then I try to get it out of the folder and it puts it on a different page. There has got to be a better way!!!!!!!!!
Please, if ANYBODY knows of a better/easier way to arrange apps, I am all ears! I have stopped at 10 pages and am synching just so I can go to bed. I have my commonly used apps basically where I want them, but I really don't want to spend the hours that it is going to take me to get these back the way I want them either using iTunes or on the phone itself. Any suggestions?

The only way to arrange apps on your phone is either in iTunes or directly on your phone.
FYI:
No iTunes content is included in the iPhone backup. After you restore from backup, you must immediately sync to restore your iTunes content. Some users have reported having to restore from backup, followed by immediately restoring from backup again, BEFORE syncing to restore their iTunes content to preserve their app arrangement in various folders.

Is there an easy way to find apps that will run on an ipod touch gen 2 with iOS 4.2.1?

My grandson's ipod touch gen 4 was stolen so I picked up a used ipod touch gen 2 only to find out I can't upgrade beyond 4.2.1 iOS, so I am trying to find apps that run on that iOS. Enter an unfriendly App Store for those of us not used to using it!
Can someone please tell me an easy way to find apps for him to run on this older system?
Thanks in advance!

You can also use this more manual but free method,
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices

HT1766 On an iPhone 5, Is there an easy way to move app icons as a group? instead of one by one?

On an iPhone 5, Is there an easy way to move app icons as a group? instead of one by one?

If you have a bunch of apps on one screen yunwantnto move to another as a group, create a folder by holding your finger on ne app until all the icons start shaking and show and "x" in the top left corner of the icon. Press again and don't lift your finger; move that icon with your finger over one of the other icons you want to add to the folder, which will create a folder. Then you can move the other apps you want to move into that folder. When you have all the apps you want to move into that folder, close the folder by tapping on the screen outside the folder. The icons should still be shaking. Then press on the folder you want to move and slide it to the edge of the screen, left or right, until the folder moves to the next screen. Once you get it to the screen of choice, you can leave the apps in that folder or move them out by the same process. When you are done moving things around, press the Home button and the icons will stop shaking. Now they will stay put.
Alternatively,my can sync your device with iTunes and move the icons around in the Apps windows in iTunes, then re-sync your device after you're finished. That will rearrange your icons on the device.
Good luck!

Is there not an easier way to rate apps?

So I've seen the posts saying that I cab rate an app on my iPad in the App store, but is there really not an easier way? As I am understanding this, I have to basically search for each app one by one - apps I've already got installed - and then rate them from the app store. This makes no sense at all. A) The only easy access to rating an app is basically as you are first downloading it on your iPad. B) This seems to really devalue the usefulness of something like the genius match thing that will suggest apps based on what I like. Sorry, I am not going to search for each individual app then rate it ... I don't understand why it just won't take me there from the "purchased" tab ... or am I missing something?

Product feedback
http://www.apple.com/feedback/

Why do we have to activate individually all third party apps!!! There should be as easier way!

Why do we have to activate individually all third party apps!!! There should be as easier way! Apple TV is not Apple anymore...

Primarily because those third party apps are just that, they are not Apple apps, and each have their own requirements for activation.

Is there an easy way to move photos from iPhone to computer? Seems like the file sharing available to some apps would make it easier than having to email photos to yourself.

Is ther a easy way to move photos and movies from my iPhone to a computer? Seems like the file sharing available with some apps would make it a lot easier than having to email them.

And don't post the same message twice.

What is an easy way to get to my app store on my computer? I can never just go to it and usually end up there by pure luck.

what is an easy way to get to my "app" store on my computer? I usually just stumble upon it my chance.

If you mean the App Store for your iOS devices, that is in iTunes. If you are running iTunes 12, then you would select the App icon in the toolbar, then select Store:
Cheers,
GB

Is there an easy way to switch back and forth between apps on an iPhone 4?

Is there an easier way to flip back and forth between apps without going through the Home button?

By "going through the Home button" do you mean double tapping the Home button to bring up the recently used apps tray?

HT1688 Is there an "easy" way to either 1) cut and paste a large block of text from the Messages app or 2) access this text through a computer?

Is there an "easy" way to either 1) cut and paste a large block of text from the Messages app or 2) access this text through a computer?

Tap and hold the text you want to copy, then tap Copy.

Is there an easy way to know which app(s) are causing spike in Data Usage?

I have an iphone 4, but son and daughter have iphone 5s and my wife a lumina. We all spiked in data usage last month, how do we determine what caused this? Was it Facebook or Pandora? Some other app? There must be an easy way to find out. Please advise. Thanks!

GV2,
I'm glad Mrhelper was able to shed some light on this for you! In iPhones, the amount of data you're seeing under each app is for the "Current Period." Just above that list you'll see info about the Current Period and Current Period Roaming. This is just an overall snapshot of total data usage for that period of time. The Current Period does not reset on its own, so it will be counting everything from the last time you reset it through now. You can reset it by scrolling to the bottom and tapping on "Reset Statistics."
So, for example, if you reset your statistics 3 days ago and then there's 1GB used under App Store you'll know that over the last 3 days 1 GB of data has been used for the App Store.
SarahO_VZW
Follow us on Twitter @VZWSupport

An easy way to quit all multi-tasked apps at once?

Running the SpeedTest app here in Japan I noticed the 3G data speeds improved dramatically (especially upload speeds) after one-by-one quitting all my multi-tasked apps and then restarting SpeedTest by itself.
I had like 20+ apps going at the time. Most of them were probably not contributing to the problem, but still, I don't know which ones.
Anyway, my question is, is there an easy way to force all the apps in the multi-task drawer to quit without one-by-one holding each icon down and pressing the "-" mark?
Thanks,
doug
Message was edited by: Doug Lerner2

That's an informative article, Johnathan. Thanks.
It still doesn't quite explain what I was seeing though.
With all the apps in the hidden dock my 3G data speeds were incomprehensibly slow. Doing a full restart didn't help. This is a critical point.
Yet when I got rid of all the entries in the hidden dock my 3G data speeds went up to somewhat respectable speeds again. In particular, what appeared to be an upload cap of 64 kbps disappeared and I was seeing upload speeds of about 800 kbps using SpeedTest.
So how to explain that? Just coincidence? Could it be that since that some apps, when the iPhone restarts, do start doing some things in the background again?
There should be some logical explanation for what I am seeing.
And I guess the answer to my original question is there is no way to remove all the apps in the hidden doc at once, is there?
Thanks,
doug

Is there an easy way to get GPS coordinates from Maps.app in Mavericks?

My DSLR doesn't have a GPS built in, but I like to Geo-tag some of my photos. I usually just take a pic with my iPhone and then copy the geo data (GPS coordinates) and paste into the photos (in Adobe Lightroom). Unfortunately, I didn't have my phone with me. I have the location stored as a bookmark in Maps, but I don't see any easy way to just pull coordinates.

Hi,
I am doing the same thing too. I have to call my reports thru menu. I tried web.show_document in my menu and it works. I also added paramform=yes and it gives the report parameters, but I want to give the user the choice of format for the reports. eg. pdf, html, excel, etc. instead of hardcoding it.
Could you please give me some idea on how can I do that??
Thanks.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet. My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses. I have read that if each person gets their own iCloud account, this would work. However, I need to know what to do after I set everyone up with their own iCloud account. Do I make that the default email address to be contacted or can they still use their hotmail email addresses. Any help- with easy explanation- would be much appreciated!!

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

Is there an easy way to see how many rows in a table? (selected or unselected)

Hi all,
Forgive me if this is a REALLY dumb question but I would love to know if there there is an easy way to to see how many rows there are in a table in InDesign?
(And I bet I am really going to kick myself when I hear the answer and how simple it probably is..lol !)
I am working on a huge catalog and am dealing with LOTS of tables...very long tables too at times. I am also doing a lot of copying and pasting back and forth between InDesign and Excel and it would REALLY help if I knew how many rows there are in a table without having to manually count them (TIRESOME!!).
Also, is there a way to see how many rows I have selected at any one time? It would be SO WONDERFUL if the info box could also provide this information.
Thank you SO MUCH in advance for your help:))
Christine
**UPDATE**
Oh boy I AM going to kick myself! Why only NOW that I wrote this question did I suddenly notice that the Table palette shows the number of rows and columns? lol.
Okay, then is there a way to see how many rows I have selected at any given time?

@Christine – try the following ExtendScript (JavaScript):
if(app.selection.length === 0
    || !app.selection[0].constructor.name === "Cell"
    || !app.selection[0].constructor.name === "Table"){
    exit(0);
var sel = app.selection[0];
if(sel.constructor.name === "Cell"){
    var tableRowLength = sel.parent.rows.everyItem().getElements().length;
if(sel.constructor.name === "Table"){
    alert("All "+sel.rows.everyItem().getElements().length+" rows selected in current table." );
    exit(0);
var numberOfRowsSelected = sel.rows.length;
var indexOfSelectedRows = sel.rows.everyItem().index;
var startRowSel = indexOfSelectedRows[0]+1;
var endRowSel = indexOfSelectedRows.length+indexOfSelectedRows[0];
alert(numberOfRowsSelected +" row(s) selected.\r"+startRowSel+" to "+endRowSel+" out of "+tableRowLength+" of current table.");
You need not select whole rows, just one or a couple of cells.
Then run the script.
An alert message is telling you how many rows belong to the cell range you have selected and:
which rows of the table are selected…
A typical message would be:
6 row(s) selected.
3 to 8 out of 20 of current table.
The script does some basic checks of the selection.
If no cell or table is selected, it will just do nothing…
Uwe
Message was edited by: Laubender | Some language cosmetics in the alert message

Easy way to intall apps

Similar Messages

Maybe you are looking for