Easy ways to find/search different fields and tables relations?

Dear Friend ,
I am useing SE11 and SE16 to different table and field name relation . Is it any easy was to find table different table and field name relation .
Please reply urgently........
Max award for sol

Hi,
I would wonder if you could use SE11 and SE16 for getting information on table relations.
You can use e.g. SQVI to create queries and you can set the link between tables (define the relation of them).
As for your question:
1 Please check this link:
http://www.erpgenie.com/abap/tables.htm
2.
You can use SE16 + DD30L to search for specific field / table.
BR
Csaba

Similar Messages

I moved several folders from my Mac to iCloud and I cannot easily find them. Is there an easier way to find them instead of searching in Spotlight?

I moved several folders from my Mac to iCloud and I cannot easily find them. Is there an easier way to find them instead of searching in Spotlight?

If you have facing pages, you have to set up the document with facing pages that is what is it for. If you have a spreadwide design as above, keep the spreads together. There is not even one reason not to do so.
Only for wire-O-bindings might a different workflow useful, but also with facing pages documents and only when the left page and the right page have not a spread wide design:
//// I did one mistake, I created a doument with a right binding, but it would work the same way with left binding.)
1. Create a document with Facing Pages.
2. Select the Spread in the Page Panel (Window > Page Panel) and in the panel’s flyout menu deselect "Allow Selected Spread to Shuffle". The spread’s page number will appear in brackets.
3. Select a single page of the spread and drag it to the side until a vertical bar appears.
4. Now you have the result.
Left and right pages have their own spread and will have a bleed around each page without taking information from the other page.

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

While not in edit mode:
- if start typing numbers, then it enters number mode.
- if start typing text, then it enters text mode.
Using the arrow keys exits edit mode. So this should work for you:
1 Type text into a cell, which enters text mode.
2 Press Return to move to the next cell.
3 Press right arrow key to exit edit mode.
4 Press left arrow key to get back to the cell.
5 Type a number, which enters number mode.
Another method that requires more planning ahead of time is to format the cells as text or number before starting the data entry. Then when you navigate to a cell while in edit mode, you will be in the appropriate mode (without having to exit edit mode).
This all works fine for me. Hopefullly it does for you also.

I have a lot of duplicate songs on my iPhone 4--Is there an easy way to find and delete duplicates?

Is there an easy way to find and delete duplicate songs on an IPhone 4?

A belated hello. On the topic of duplicate songs / tracks showing up in, say, your iPhone Music app but not in your iTunes Library, with these versions installed ....
iTunes 10.5
iPhone 4 running on iOS 5
.... I discovered this too. This is what I did:
1. purchased full album from the iTunes Store
(once download completed, album magically showed up in iPhone Music app, as expected, without having to sync)
2. I then went to my iTunes Music view and edited the album year (Multiple Item Information)
3. Synced
4. All album tracks showed up in duplicate in iPhone Music app (but not in iTunes view)
Solution:
1. in iTunes, I changed back the album year to the one iTunes Store originally downloaded
2. Re-synced
3. Now all album tracks show up but no longer in duplicate in iPhone Music app
Lesson learned: When purchasing music from iTunes Store, leave metadata untouched.

Is there an easy way to find out if a user has a message in their voicemail.

Is there an easy way to find out if a user has a message in their voicemail from the
UNITY subscriber page? Or anywhere I can look to see if they do. I don't have access to the exchange servers. We are currently running UNITY 5.0(1). thanks

The only way you'll be able to do that is to login to Outlook Web Access, or possibly setup an IMAP client to that user's mailbox or have TAC run the DohPropTest in attach mode to return the contents of the user's inbox. If the first two don't work, I'd go with the latter and let TAC help you verify if there are any messages in the inbox that are unread.
Hope that helps,
Brad

Is there an easy way to find apps that will run on an ipod touch gen 2 with iOS 4.2.1?

My grandson's ipod touch gen 4 was stolen so I picked up a used ipod touch gen 2 only to find out I can't upgrade beyond 4.2.1 iOS, so I am trying to find apps that run on that iOS. Enter an unfriendly App Store for those of us not used to using it!
Can someone please tell me an easy way to find apps for him to run on this older system?
Thanks in advance!

You can also use this more manual but free method,
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices

Attaching search help to SCREEN FIELDS AND TABLE FIELDS

Hello experts,
Himanshu here.
Could you please explain how we can assign search Help to a screen field AND TABLE FIELDS in ABAP?
Please reply at the earliest,as we have some deliverables to be met
Thanks

Hi,
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Collective search help and choose .
The maintenance screen for collective search helps is displayed.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the parameters of the collective search help.
Select the Imp flag if it is an import parameter. Select the Exp flag if it is an export parameter.
Define the types for the parameters of a collective search help by assigning a data element. Enter the name of the data element that describes the contents of the search help parameter in the Data element field.
You can assign the parameter a default value in the Default value field.
In exceptions it could be necessary to change the standard process defined by the search help. You can implement the deviation from the standard using a search help exit.
In this case enter the name of the search help exit in the corresponding field.
On the Included search helps tab page, define the search helps that you want to include in the collective search help.
You can include elementary search helps and collective search helps.
Use the Hide flag to control whether an included search help should appear in the dialog box for selecting the elementary search help. If the flag is set, the search help is not offered.
It makes sense to hide search help inclusions if one or more search paths in the standard system should not be used in a concrete R/3 System. Similarly, search help inclusions can also be already hidden in the standard system because they only can be used meaningfully in a few R/3 Systems. You have to cancel the flag in this case.
Position the cursor one after the other on each allocated search help and choose Parameter assignment.
In the next screen, enter the parameter names of the elementary search helps to which the corresponding parameters of the collective search help should be assigned in the field Reference parameter.
You can select the parameters contained in the included search help using the input help. Create a proposal for the assignment with Proposal.
Save your entries.
A dialog box appears in which you have to assign a development class to the search help.
Choose .
Result
The collective search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred when the collective search help was activated, the activation log is automatically displayed.
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
regards,
veeresh.

Fields and Table for Delivery address in a PO

Hi Gurus,
I want to find out the fields and the corresponding table for the delivery address in a PO (line item details). It is the address of the plant. I searched the tables ADRNR, ADRN2 and one customized field (/GLB/Ship_to) in the table EKPO, but of no help. I can find out from other tables the address of the plant, but I want to go to a table for PO, where I can have the delivery address/ship to address.
Please help.
Thanks,
Kumar

Hi
For Plant Address, check the table T001W
If you want complete address details, take the ADRNR field value from T001W and pass it to the field ADDRNUMBER of table ADRC, you will get the details.
Normally addresses are stored in the table ADRC. If you gave any other Delivery Address in the PO, instead of Plant, get the value of ADRN2 from EKPO and pass it to ADDRNUMBER of ADRC and you will get the address detials.
Edited by: Arun R on Dec 17, 2010 2:39 PM

Field and Table for PGI status updation

Hi All,
I want to know in which field and table the PGI status will get updated.
i.e. once we do the PGI for a delivery in which table will this PGI status gets updated.
Thanks in advance for help.
Harini

Hi Harini,
In Table VBUK you 3 different status related fields for sales documents.
Over all status field name GBSTK ( here it gives the total status of praticular sales document) here you see options
A Not yet processed      ( This means its complete open)
B Partially processed     ( This means the sales doc is partially processed)
C Completely processed ( This means the sales doc is completly processed)
Delivery status and over all delivery status field name LFSTK and LFGSK respectively, these 2 fields will be same always ( here it gives the total status of praticular sales document) here you see options
A Not yet processed      ( This means its completly open)
B Partially processed     ( This means the delivery doc is partially processed)
C Completely processed ( This means the delivery doc is completly processed)
So overall status can be different then delivery or overall delivery status.
If sales document has 100 quantity for 1 material, if delivery is done for 50 quantity.
Then over all status field name GBSTK will be B Partially processed and delivery and overall delivery will be C Completely processed .
Regards
vK

Where can i get SALES ORGANIZATION FIELD and TABLE

Can anybody tell me where can i get FIELD and TABLE Name OF " sales organization "

Dear Sandeep,
u will find VKORG is the Sales Organisation .
u will find this Field in every related SD Module Table...
Like ...VBAP,BKPF ..etc..
Hope it helps...!!!
Pls reward if Helpful...!!!

What is the field and Table for "Batch Class" and "Class Type" in QM.

Hi All,
What is the field and Table for "Batch Class" and "Class Type" in QM.
Thanks,

Hi,
For batch class the class type value is '023' . This you can find from KLAH table and the fileld for class type is KLART..
And also all the data related to batch class are found in tables INOB, KLAH,KKSK and for the characeteristics of batch materials you can refer AUSP table.
In INOB table, for batch class, you need to give 023 in KLART field and value MCH1 in OBTAB filed.
Please check this and let me know if this you need any more details?

UCCX What field and table of the UCCX database contains the max time to answer a call?

What field and table of the UCCX database contains the max time to answer a call?
Also when performing an aggregate function on CSQ queries do I group on target id? Is that the unique identifier?

Hi Christina,
Please find the information of the UCCX DB schema in the following table:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85dbschema.pdf
Regards,
Arundeep

Reg:field and table name

Hi Guys,
I am developing one report for knowing the recognised amount ,but i am not able to get the field and table name .In system it is showing that VBRAV51HD:RVAMT_REAL_G.But this is a structure,how to get a field name for recognised amount.Please help.
Thanks & Regards,
Sash.

Hi sash,
I think u need to some R n D upon it. First take the structure and open it in SE11. Then try to find out what all tables does the structure comprises of. Then try finding the relevant fieldname of the table( which is also existent in the structure) getting accessed when the field is triggered. That may solve your problem. try finding the objective of your structure being shown.
Abhijit

Is there any way to find out wn was a table deleted apart from using audit

Is there any way to find out wn was a table deleted apart from using audit
Oracle version 9.2.0.7

SQL> SHOW USER
USER is "SCOTT"
SQL> CREATE TABLE test_delete AS SELECT * FROM emp;
Table created.
SQL> DELETE FROM test_delete;
14 rows deleted.
SQL> COMMIT;
Commit complete.
SQL> conn sys@orclsb as sysdba
Enter password: ******
Connected.
SQL> ALTER SESSION SET nls_date_format='DD-MON-RRRR HH24:MI:SS';
Session altered.
SQL> BEGIN
2     DBMS_LOGMNR.START_LOGMNR (
3           starttime => '02-FEB-2011 17:51:00',
4           endtime   => '02-FEB-2011 17:54:00',
5           options   => dbms_logmnr.DICT_FROM_ONLINE_CATALOG+
6                        dbms_logmnr.continuous_mine +
7                        dbms_logmnr.no_sql_delimiter +
8                        dbms_logmnr.print_pretty_sql
9                                  );
10 END;
11 /
PL/SQL procedure successfully completed.
SQL> set line 10000
SQL> SELECT scn ,timestamp
2         ,commit_timestamp, username
3 FROM v$logmnr_contents
4 WHERE
5   username = 'SCOTT'
6 AND TABLE_NAME='TEST_DELETE';
       SCN TIMESTAMP            COMMIT_TIMESTAMP     USERNAME
   2309736 02-FEB-2011 17:53:20                      SCOTT
   2309739 02-FEB-2011 17:53:20                      SCOTT
   2309769 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
       SCN TIMESTAMP            COMMIT_TIMESTAMP     USERNAME
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
17 rows selected.
SQL>

Field and Table name for purchaser

I want to know the field and table name for purchaser id and purchaser name.
Plz help me.

Dear
Purchaser name are define in Header level data in Purchase Order EKKO & Purchase ID define as a Purchasing Group
Purchser Name EKKO-ERNAM
Purchase I D EKKO-EKGRP
Regards
Aamir

Easy ways to find/search different fields and tables relations?

Similar Messages

Maybe you are looking for