EAX and Win back confidence

I am hoping that Creative can built their next generation X-Fi into the speakers , home entertainment system and so on one day instead of solely dependant on the PC. It should also make use of Zii to make up on the shortfalls of X-Fi to process very complex and very intensi've?audio environment. Continue their developments on EAX and OpenAL?which is important for developers.
Microsoft ditch DirectSound and DirectSound3D but developers still works on EAX through OpenAL.
Developers still use EAX as a de-facto standard and PC audio industry called this SoundBlaster compatibility. Creative has responsibility to ensure that all their SoundBlaster works and provide great EAX supports whenever. They should constantly review their drivers, their software release to provide greater supports. It's a responsibility which brings trust, quality and continue reliability.
This can win back their lost market share and win back confidence.
While Creative create the next generation EAX standard and sound blaster, they should explain what type of engineering was created which was so distinctly different from before?and be proud to explain these merits to all. Creative?can raise the bar of the industry with next generation EAX and audio solutions. It should be using?superior and specialise hardware to deli'ver that and not any software or processor based. (too bloated)
Creative marketing needs to be somehow?more technical to?market its products.
Creative sale needs to?be more open and?understand?market needs.
Creative support?needs to?be responsi've to market needs and changes as the sale face tough market competitions....

Creative should quickly move towards computational audio... compute audio in various ways...
e.g. understand difficult audio environment... like multiple layers of sound...
Distinguish environment, distinguish?emotions like?fear, danger, happy and?sad...
Have useful features like voice translation, voice to words translation... languages translation...
Perhaps this? might requires a very comprehensi've audio?database?and?also algorithm.
Creative should?use its expertise to continue it's development on audio and reinvent the audio architecture and interaction architecture.
This?could be?a reality in times to come...
It could change the audio landscape as it's currently very dull.

Similar Messages

  • What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

    Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
    So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
    All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
    I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff" 
    O.o
    A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
    Here is a summarized history of my relationship with Wine:
    Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
    'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
    Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
    So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

    ## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
    For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
    If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
    http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
    The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
    For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
    First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
    Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
    Third, you will need to get MacPorts and configure it. The tutorial should have this data.
    When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
    After obtaining wine, to run a program, open the terminal.app window.
    cd desktop/XYZ/ZYZ\ WRQ
    The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
    wine th11e.exe
    Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
    It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
    If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

  • SAP GUI and Win 7 error when attaching a document

    I searched Google multiple times for an answer but didn't find one, so I'd like to bring it up in this forum.
    I start by saying that mine is a large corporation with centralized application, Windows and security configuration, so I have very little manuvering as far as changing settings.
    The problem we run into is as follows:
    some users who use a particular (Quality Assurance) module of SAP need to regularly attach documents (typically PDF format) in SAP. The typical size of an attachment is between 3-7 MB.
    Those documents are store on a network file share remote to the site. The network latency between the site and the file share location is approx. 6ms (not huge by any means). Users are running Win 7 Enterprise SP1.
    Randomly, the attachment download fails in SAP and they have to exit and log back in to SAP to resume. The attachment may fail2-3 times, and then succeed or fail permanently.
    Copying the file to a local drive (C:) and then attaching it in SAP always works.
    The users report that this was not an issue when they were using WinXP SP3 a few months back.
    Again, the problem is random in that it cannot be recreated at will but happens often enough to be more than just an inconvenience.
    the Windows event log logs the following message when the attach process fails and SAP freezes:
    The program saplogon.exe version 7300.1.2.1080 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: a7c
    Start Time: 01cf38c9a86d55ac
    Termination Time: 16
    Application Path: C:\Program Files\SAP\FrontEnd\SAPgui\saplogon.exe
    Report Id: 139b5ba9-a4bd-11e3-8b65-d8d3857a05c5
    I'd appreciate any input that would help resolve this issue.
    Steve

    Besides updating the patch level, the other thing you can try to get more information is turn on or increase the level of tracing within the SAPGUI.  You can do this on the workstation in SAP Logon by clicking the little button at the upper left of the window title bar, then in the drop-down choose Options.  In the new window that opens go to the Traces folder and have a look through the three different kinds of traces you can turn on.  Probably you should turn on SAP Logon Traces to the "Errors" level, and same for SAP GUI Traces (to Level 1: Errors), and under Session Traces pick the options that make sense to you (perhaps "Access Control", "Office Integration", and/or "Security"?  You might need to experiment with different options to get the right combination that doesn't overload the trace file with noise; you may not need a Session Trace at all if the error trace on the other two options reveal what's wrong).
    You can see under Session Traces what folder the trace files will go to, and open the folder from there.  By default it will be C:\Users\<username>\AppData\Local\SAP\SAP GUI\Traces.
    Best regards,
    Matt

  • Mac Pro -- Installing XP and Win 7 on a SEPARATE Internal Drive

    I would like to install Windows XP SP2 and Windows 7 onto the second Internal Drive in my Mac Pro. I am planning to install Win XP on the first partition and Win 7 onto the second Partition of Drive 2.
    Will this work?
    Drive 1 - GUID partition Scheme -- 1 partition -- Snow Leopard
    Drive 2 - MBR Partition Scheme -- 2 partitions -- WinXP -- Windows 7
    Drive 3 - MBR Partition Scheme -- 3 partitions -- Linux
    Drive 4 - MBR Partition Scheme -- 1 partition -- NTFS Shared Data
    Can I use MBR or do I need to use GUID Partition Scheme on my second drive holding Win XP and Win 7?
    P.S. I do not plan to use Bootcamp assistant to install WIndows XP and Win 7. I only will be using the Mac OS X Install Disk to install the Bootcamp Drivers.
    And What does this mean in the Bootcamp Guide:
    "Note: If your computer has more than one internal disk and you want to install
    Boot Camp on a disk that isn’t in the first hard drive bay, remove the drives in the lower numbered bays. You can reinstall the drives after you install Boot Camp."
    What does Apple mean by lower number bays? Drive 1 or Drives 3 and 4?
    And why do I need to remove drives?
    Rob

    I thought it might be possible, and while you must use MBR, and while Windows 7 can install on its own without BCA, the same is not true of XP. People have tried, and the conclusion was a no go.
    Don't know what Linux requires.
    GPT is fine for data drives though, and is required when you get into drives of 2TB and larger.
    As long as you format the drive partition table as MBR you are fine.
    The only time when you used GPT you have to also use BCA to add the MBR and have a hybrid partition. GPT actually includes an "MBR holder" to prevent XP and others from wrecking havoc on GPT volumes that they don't support.
    Never used XP, and for one purpose alone I just used XP Mode instead.
    Apple tech notes are full of misinformation and support for Windows on their own Macs is sadly missing.
    BUT: remove any and all drives that are GPT or have OS X during the install of Windows (both XP and 7). Otherwise it won't install. Then put them back. And if you want to play safe, then use the drive bay #1 at the front of the Mac for Windows, yes.
    http://developer.apple.com/technotes/tn2006/tn2166.html
    http://www.microsoft.com/whdc/device/storage/GPT_FAQ.mspx

  • My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

    My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
    Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
    How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

    Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
    I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
    Thanks in advance!
    Allen

  • PSE 9 install fails during Shared Technologies and rolls back

    I've bought and am getting fed up with trying and failing to install PSE9.
    It fails during the install of 'Shared Technologies and rolls back.
    I've unpacked the logs as per instructions and the error messages at the end are:
    - 0 fatal error(s), 5 error(s), 3 warning(s)
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    ERROR: The following payload errors were found during install:
    ERROR:  - Elements Camera Raw: Install failed
    ERROR:  - AdobeHelp: Install failed
    ERROR:  - ElementsSTIInstaller: Install failed
    ERROR:  - Adobe ExtendScript Toolkit CS5: Install failed
    I've looked through the forums for possible causes:
    1) Adobe Bridge process running in background - according to task manager, the only Adobe process running relates to Flash
    2) Path problems - I've moved the install files and re-extracted them to a folder in C: with the same results.
    I then tried installing the loganalyser but that failed as well!
    I have attached the compressed log file.
    I am riunning Win 7 Home Premium (x64)
    Help please!
    Steve

    See if any of the solutions here help:
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

  • Maverick OSX update crashed my computer and OS. My harddrive and OSX and WIN have been lost and are irreparable. What are the next steps?

    Mavericks has crashed my MacBook Pro.
    I was offered the upgrade as a free and reccomended Apple Software Update that arrived on my computer.
    I installed Maverick received an error during installation saying the HD was bad. I ran utility disk and internet recovery and attempted to boot in safe mode to no avail. My computer no longer had an OS. (I ran both OSX and WIN on my new HD). I took it to the Apple store and it was determined it was a software failure (Maverick) and not my harddrive. The tech at Apple told me I could take it to a data recovery place on MY dime to attempt to recover anything from the HD. I ran several expensive architectural programs which are now lost. Any advice as which aveneue to take next is much appreciated. Thank you in advance.
    Ashley

    https://discussions.apple.com/docs/DOC-1689
    Note, backing up is not a choice in computing.  You either value your data or you don't.  And when you install new software the drive is that much more at risk, if it is marginal.  This is true of any operating system update because of the number of changes that happen at once.

  • IR6 and Win Server 2008

    Could someone confirm if Win 2008 Server is supported with the IR6 release? I was on a webinar yesterday about ZESM and I asked the same question and was told that Win 2008 Server was supported. However, I cannot see any such reference when lookiing on Novell's site about ZESM.
    Thank you in advance for any replies.
    Scott

    Daniel:
    Thank you for the info.
    Scott
    >>> Daniel Spinatto<[email protected]> 4/28/2009 9:20 AM >>>
    Hey there.
    At this time, Win2K8 is not a supported platform in IR6. Also, Win2K/SQL2K support were removed from IR6.
    Sorry for the delay.
    Daniel
    >>>
    From: Scott Leonard<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 4/17/2009 10:22 AM
    Subject: Re: IR6 and Win Server 2008
    Daniel:
    Thank you for checking into this.
    Scott
    >>> Daniel Spinatto<[email protected]> 4/16/2009 9:23 AM >>>
    While I had not tried to install IR6 on Win2K8, I remember some conversations about support being dropped for SQL2K, and Win2K8 being added in IR6.
    However, the website and documentation seem to not reflect those changes.
    The Readme for IR6 still mentions that Win2K8 is not supported:
    http://www.novell.com/documentation/...5.html#bcxgf96
    I will try to confirm that internally and give back and answer.
    >>>
    From: Scott Leonard<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 4/16/2009 10:43 AM
    Subject: IR6 and Win Server 2008
    Could someone confirm if Win 2008 Server is supported with the IR6 release? I was on a webinar yesterday about ZESM and I asked the same question and was told that Win 2008 Server was supported. However, I cannot see any such reference when lookiing on Novell's site about ZESM.
    Thank you in advance for any replies.
    Scott

  • Can I pass XMLnode as a input and get back XMLnode as output from a SP?

    Hi,
    I find implementations where XMLNode's outerxml (varchar) is passed as input and generally the XMLNode output is obtained using the ExecuteXMLreader.
    is there any other way of doing this... like where the SP gets an XMLNode input and returns back an XMLNode output?
    not sure if this is relevant... I am trying to use OracleAS to expose SPs as webservices... I am a .net guy got no clue on J2EE architecture... how much JAVA coding or understanding of J2EE architecture is reqd for accomplishing this?
    looking fwd to your replies...
    regards,
    Sakthi

    James, welcome to the forum.
    If Shaw is a telecommunications company, I would contact their Customer Service to see what they have to say.  This is a specialty connection that is better handled by the people who deal with it every day.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Windows 10 upgrade and roll back limits?

    Is there a limit on the number of times you can do the Windows 10 upgrade and roll back to 8.1?  I would like to do the upgrade on my Thinkpad Yoga 14 but am concerned about the issues noted on here.  I don't want to make too many attempts and lock myself out of the upgrade. I think I did see on here where someone tried 6 times. Thanks,Sue

    So I'm in the same boat. My HP desktop that came insatlled  with WIn 8.1 64-bit and it "upgraded" to WIn10 badly. WIn10 wont activate becasue it says my license code is blocked on the server,  none of my installed apps or data came over and the receovey option will now only recover to WIn10, I have no option to go back to Win 8.1, thouhgh a windows.old dir is there on the C: drive.  I have my Win 8.1 license code from before the "upgrade" attepmt,  but there is no way with what WIn 10 left me with to revert back to Win 8.1. I went to the HP suppprt & downloads page to see if thre was WIn8.1 recovery media available as discussed here : http://support.hp.com/us-en/document/bph07143#AbT2 , but nothing shows up for my HP Pavilion 500-210qe CTO. Looks like both MS and HP got me good.

  • Freeze Problem (EAX and MI

    Hello everyone. I have had my SoundBlaster Audigy 2 for almost a year now and it has always had this problem. I will be in the middle of an EAX game or playing back a MIDI file and the entire system locks up completely with a high pitched squeel continuously emanating from my speakers.
    My system:
    Intel P3 900 Mhz
    Audigy 2
    52 MB RAM
    G-Force 3 Ti 200
    This is very important for me to fix now that I am starting to focus on MIDI some more with my music recording.
    I read in a few other threads where other people have had this problem. I haven't tried any of these suggestions just yet, but switching the PCI slot and updating the MoBo BIOS were ineffecti've for them. I am willing to try this though if anyone thinks it will actually help. I'll have a problem updating my BIOS though because I don't exactly know what my MoBo is and I have a Dell proprietary Intel processor.
    Thanks for any help.

    I have this exact same problem when I play certain computer games. Exact freezing/screeching noises every few minutes followed by me having to cold reboot the PC...
    Anyway, long story short, I've concluded the the culprit is most likely Creative's crummy drivers and EAX. When I disable EAX (i.e. use Software 3D audio, etc) the freezing problem is completely resolved.
    Regardless, I'd like this problem fixed by Creative with some new drivers, I supposed. I have the Audigy Gamer sound card, and there has not been a driver update since November 2002. Yes, the problem is solved by not using EAX, but then why did I buy an EAX-capable card again?
    A few facts (or at least reasonably true according to my observations over the past year):
    -This freezing/high pitched sound looping only happens in games or programs with EAX/hardware 3-D audio enabled
    -With EAX disabled (i.e. just using software sound or regular 3-D stereo) from the game or program options, the freezing is nonexistant.
    -With EAX enabled, I get the sound looping/freeze with many different video drivers and motherboard BIOS versions, Windows SP and SP2, all patches, newest drivers, cleanly reinstalled system, etc. - the fact is that EAX and Creative's drivers are to blame here.
    My current specs for comparison's sake:
    Windows XP Pro with SP2
    Intel Pentium 4 2.8GHzGB DDR400 RAMAbit IC-7 mobo60 GB SATA, 60 GB IDE, 20 GB SATASoundblaster Audigy GamerRadeon 9800 PRO (latest Catalyst drivers)
    Creative, what's the deal? Gi've us XP drivers that aren't buggy.
    Message Edited by slicknick986 on <SPAN class=date_text>-27-2004 <SPAN class=time_text>07:30 PM
    Message Edited by slicknick986 on -27-2004 07:3 PM

  • BlackBerry to bring back function keys to win back former fans

    From the Globe and Mail
    BlackBerry to bring back function keys to win back former fans
    BlackBerry Ltd. is seeking to win back once-devoted customers by bringing back a popular set of command keys that the company had abandoned with the launch of a new family of smartphones this past year.
    Sources familiar with the company say chief executive officer John Chen will announce Tuesday at a mobile industry conference in Barcelona that the Waterloo, Ont.-based company will restore its trademark “belt” of five function keys that sat between the screen and keyboard.
    This includes a trackpad and other keys that allowed users to easily navigate between different applications. The belt will appear later this year on phones powered by the BlackBerry 10 operating system.
    A company spokesman declined to confirm the announcement. In a recent interview, to be published later this week in Report on Business Magazine, Mr. Chen said that future BlackBerry 10 smartphones “will have some of the features our power-users love” but were not included on the first phones launched a year ago on the platform, the all-touchscreen Z10 and the Q10, which features both a keyboard and touchscreen.
    (more at the link above)
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

    Will it be a year or more?
    Or will they adapt known yet to be released hardware with the belt of buttons?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    Did you remove Quicktime X?
    On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
    You will need to reinstall OS X to get Quicktime X back if you have deleted it.
    I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

  • I just upgraded my new ipod touch to the latest software.  Can I remove it and go back to previous version?

    I just upgraded my new ipod touch to the latest software.  Can I uninstall and go back to factory version?

    Thanks fang22 for your help.

  • I updated Xcode 5 to Xcode 6.0.1. It messed up my previous apps and i don't know how to fix it. Is it possible to uninstall Xcode 6 and go back to Xcode 5?

    Hello,
    I updated Xcode 5 to Xcode 6.0.1. It messed up my previous apps and i don't know how to fix it. Is it possible to uninstall Xcode 6 and go back to Xcode 5?

    I found this solution http://objcsharp.wordpress.com/2014/09/21/how-to-get-back-the-ios-7-sdk-after-up grading-to-xcode-6/

Maybe you are looking for