EAX Console in Window 7?

I have Creative Audigy 2 soundcard
[color="#000000"]I want to use Window 7 but I can't install EAX Console, just install it's when I use Window XP.
[color="#000000"]I need EAX Console for audio effect (microphone effect).
[color="#000000"]How can I install EAX Console with Window 7? or where I can find another software support effect microphone like that.
[color="#000000"]Please help me, thank you all!

So, am I just non-savy or am I beating my head against the wall? Soundblaster li've 24bit external will not give me the EAX console with windows 7...... I cannot believe that a product that I have only had for 5 years does not seem to be compatible with the new windows....please tell ne I am wrong, and you folks at Creative did write an upgrade for us mere mortals. I truely love the program and use it almost daily.....so tell me, do I have to buy a new version everytime I have to but a new computer?....if so, you folks are just as screwed up as Microsoft....planned obsolecence is a pathetic way to do business.... TELL me I am just a dumb**bleep** whio can't figure out which download to use.

Similar Messages

Where is my EAX CONSOLE on AUDIGY 2 in Windows Seven 64bit??

?as i said, i really need eax console to increase or decrease volume of any of ma speakers. CREATIVE please help me to find solution. Sometimes i need [color="#ff0000"]concentrate all of sound to one speaker ex. rear left whiteout eax console i can't do that.
I buy AUDIGY 2 to have a nice sound and to use all of its features but whiteout proper software and programs is is worse than my nvidia sound on mother bard.
regards and waiting for your soon reply with an solution

Hello jmacguire,
I read your hint above a few weeks ago and then bought a used Audigy 4 Pro card with the intention to use it under Windows 7 x64 (because of missing features in the X-Fi software regarding EAX; compare my thread over there).
Your hint (copying the three files in the EAXCon setup directory) together with Daniel K.'s newest v3.8 Audigy Support Pack worked and I could successfully install EAX Console on Windows 7 x64. I used the same trick to install things like Surround Mixer from the original CD, too.
The driver itself works. The problem is, as soon as I start the installed Creative applications, they either immediately quit with "no supported hardware found" or show up with a GUI, where nearly everything is deactivated; cf. the following screenshot. Only the speaker settings seem to work correctly/as in XP:
How can I get back the functionality like editing EAX profiles, CMSS selection, ... in W7x64. Considering even Creative published a new Audigy series driver on 9th April 2010, which explicitly supports Windows 7 x64, there must be a way to get the software for this card running again, must it not?
Please help me, if you can. Thank you,
orthoceros.

Audigy 2 - EAX-Console crashes everyti

Hi,
I own the Audigy 2 ZS and have some trouble with the EAX-Console.
When I want to change some settings there (CMSS f.e.) the software just hangs up.
Like 80% of the time and I am not able to restart it, until I do a reboot.
I have the latest drivers, so I tryd that already.
Any suggestions?

I am having the same problem as you guys, I have Audigy2 ZS retail and everything was working fine until I got Silent Hunter 3. It was suggested I re-install the soundcard drivers/software so I tried that. Now my EAX console, Graphic Equalizer, surround sound mixer, creative speaker settings will not open. I've also tried a system restore, uninstall, re-install using the cleansweep method, drivers from disk and online got all updates. I've repeated this four or fi've times and Still nothing. When I tried to open the EQ an error pops up that says nothing in it except a red X. EAX console says "no components registered".
I hope I don't have to re-install Windows just to get this soundcard software working properly agian.
Thanks

Error when Installing Eax-console as part of Audigy support pack 3.6

<div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem:
I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently I used 3.5 and 3.6 in both OS for a short time.
now I had to format my harddisk an have installed a clean version of Win XP SP3. I installed an update pack (winboard.org), the latest direct X and drivers for nvidia motherboard and videocard. Then, when I tried to install this support pack, I get an error messagge I-00 when eax-console should have been installed, something about CTengine being unable to be installed.
I read through many of the solutions here in the forum, since this error seems to be not so rare. But up to now, nothing helped. This is, what my install.log tells me:
[EAX Console]
GUID={5B7E626-7885-4FC3-A66A-73548A4F0FD}
Warning=I-008 CTRegSvr fails to register C:\Programme\Creative\EAX\Karaoke.exc.
[Common Audio Driver Interface]
GUID={700932B3-A964-4878-82A2-96054622AF7}
Warning=I-007 RegSvr32 fails to un-register C:\Programme\Creative\ShareDLL\CADI\ctcadi.dll.
All other install.log from the other parts of the pack contain no warning. Everything except the EAX-console works fine, if I try to start that, I get an error "No components are registered", an I don't have a "karaoke" register, but otherwise it works well, I can use the effects and cmss.
What the heck could I do?
I made an new thread, since nobody seamed to react to my post in the support pack thread.

HRe: Error when Installing Eax-console as part of Audigy support pack 3.6o What you have is a missing file, or perhaps your system is wanting to install direct X redistributable or something similar. Do a search on your system for install.log and when you find the newest one, or second to newest one, open it with notepad. It will tell you exactly what you are missing. I was trying to install some components for my Elite Pro and it said in the install.log that it could not find DXREDIST. So I copied a version I had to the installing program's folder and it worked!? So take a look at that log and see what is missing......write back with your results if you dont mind. In the original post I had seen the registration problems with components. You can manually run regsvr32 with the /? switch and see how to unregister that yourself and then try the installation again.
Cheers,
jmacguire

Unable to install EAX console, speaker settings, e

I've had problems with audio files skipping and causing the PC to freeze. I'm down to testing the sound card. I've made sure the onboard audio is disabled in the BIOS and I updated to the most recent drivers for my Audigy 2, but I'm having problems bringing up the EAX and speaker settings.
Those are grayed out and unavailable in MediaSource. I did the cleansweep/uninstall procedures, but I still can't get those programs to work right. I downloaded the EAX console and speaker settings, but everytime I try to run them, they quit out since the required components weren't found.
I have my speaker settings set to 5. in Windows, but I have no sound coming from my center or surround speakers and the bass is too loud. I can't change these settings without the EAX console. What's the problem? Why can't I install/access the EAX console?

Lots of info, but no printer model, how you are trying to connect, what operating system.....
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

EAX Console Application encounters errors (cant use it) - Audigy 2 ZS

I bought my Audigy 2 ZS in late 2006 and i used to enjoy the EAX Console, but its always been flaky. Often I have to reinstall it from the CD and that is total crap. I have the latest drivers and the EAX console crashes on me. Where can I get the newest version?
EAX Console Application has encountered a problem and needs to close. We are sorry for the inconvenience.
The Creative Volume console works fine, but I used to like messing witht he EAX console while listening to music, its much better than all the crappy winamp plugins out there, but it seems I can no longer use it.

I'm on Windows XP Pro SP3. I dont see why the app breaks constantly. Even when I got it brand new it failed within a month or 2. The only way I've gotten it to work is to install the drivers and app off the cd constantly. And that is ridiculous. The new drivers shouldnt break anything either, maybe they can update the apps and put them online. So what if someone that doesnt have the soundcards can attempt to use them, I paid good money for my card, because I had creative soundcards that were very good in the past. I just wish the EAX console worked, winamp plugins suck compared to the Creative EAX [email protected]

[FINALLY SOLVED] "Audio device not detected by EAX Console/Speaker Setting Panel" Prob

PROBLEM: A message pops up saying "The audio device supported by this application is not detected" when clicking on any Creative Utilities like EAX Console or the Speakers Control Panel.
SOLUTION: After 6 hours of trying out all solution advices/attempts for the problem above, I figured that there are only 2 ways to get rid of this issue.
[color="#ff0000"]st way: Kill your whole system, by doing format C:
[color="#800000">2nd way: Follow this advice from Shag:
[color="#800000">?
[color="#800000">An installation error causes this problem which in the first instance is addressed by ensuring that you have disabled the onboard audio. If this does not work in the second instance you will need to uninstall the card as follows:
() Uninstall software and drivers either, through control panel or the installation CD
(2) Move the card to PCI slot 3 (if not already there) [VERY IMPORTANT]
[color="#800000">?
[color="#800000">(3) Manually remove registry entries as follows:
. Delete the files from "\Creative".
2. Delete the following registry node from the registry
- HKLM\Software\Creative Tech\Software Installed
- HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uni nstall\5CDDF96A-BC34-4D72-9ABA-EFFF0C39977
(4) Reinstall the software and drivers.
Eventually I'd like to recommend the Creative Team to put this solution in the FAQ, since I counted at least 20 members in this forum, having the same problem without getting to a solution.
Cheers,
Diabolius

BTW just in case people search for the error message in German:
in German the pop up says:
"Das von dieser Anwendung unterst?tzte Audioger?t wurde nicht gefunden"

EAX console on audigy 2 platinum

Hi all i just reformated and installed all the updated drivers for my audigy 2 platinum but now i dont have the EAX console with the mixer and the calibration tool. there is no icon in the desktop tray and when i tried to install the EAX console it says im missing required software and it exits.
Im on windows xp, i hope creative didnt get rid of all that right now i just have "creative audio console" and it doesnt have an EQ or bass/trebble settings. What should i do?

I have the same problem on Windows 7 - 64bit...and before also on windows xp 32bit...
I have installed all the drivers and all the utilities.
who can help us?

EAX Console/Aud Clean Er

I have a Sound Blaster Audigy 2 card. Whenever I go to start the EAX console I get an error message. It goes as follows:
Title: Aud Clean
Body: Exception -- CreateObject : Exception:FactoryNotFound Message:"Invalid Factory in CreateObject : CRecordSchema" At:Wednesday, July 3, 2005 23:45:46
Then I get another error box (One of those Microsoft program crash boxes)
Title: Creative MediaSource Player
It goes on to state that Creative MediaSource Player has encountered an error and needs to close. (It has send error report and all that)
Then I get a critcal error box that goes as follows:
Title: CTCMS.exe - Application Error
Body: The instruction at "0x04e9f79" refrenced memory at "0x00000008". The memory could not be "read".
Click on OK to terminate program
I have clean booted, clean installed Windows, clean intalled the drivers/software and nothing is working. Any help would be greatly appreciated.

It doesn't crash if I just choose a song from the playlist that is there when I load it up, I just now chose different songs throughout the acti've playlist, I then emptied the playlist, chose an artist, album, and hilighted all the songs and drug them into the playlist and it crashed instantly..
AppName: ctcms.exe AppVer: 3.0.37.0 ModName: ctplayq2.dll
ModVer: 3.0.0.0 Offset: 00077
which is different from last time, last time was
AppName: ctcms.exe AppVer: 3.0.37.0 ModName: msvcp60.dll
ModVer: 6.2.304.0 Offset: 000026d
I just now ran it in PLAYER MODE to see if it was only doing it when I was in the organiser mode, and i went to add to the playlist, as soon as I choose the tracks and press ok, it acts as if it is going to load them, and then it crashes. this time with the 2nd error msg from above. I just now tried with a different SKIN, didn't know if that would make a differense, but sometimes certain skins in certain programs have bugs, but same as before, adding anything to the playlist crashes the player. It didn't used to do that. Last week it worked fine. I don't get it.
You have any clue as to what might be causing it's
Thanx for the reply.. I really appreciate it.

EAX Console issues: An error has occur

Hi there. My name is Emil, 2 years old, and from Gothenburg, Sweden.
I have a SoundBlaster Audigy 2ZS and EAX console , 5. i think. I've searched the board and read the FAQ without any help at all, so i made a new thread.
Yesterday, my EAX Console flipped out, or as a matter of fact, my whole Creative MediaSourcePlayer and all of it's function flipped out. Whenever i try to launch the following program, it says an error has occurred:
Surroundmixer (Surmixer)
EAX Console
AudioHQ
Creative MediaSource Player
THX Setup Console
Speaker Settings
Diagnostics
Graphic Equalizer
I've tried the following things:
) Reboot
2) Installing CMS_PCAPP_LB_3_30_2.exe as stated in the help.
I don't know anything about Hardware, so for me to switch PCIslots and stuff like that is impossible. I have no issues about regedit or stuff like that, but I just can't handle anything concluding the hardware.
Thanks in advance, and regards // Emil Svensson, Sweden.

IIrc, this issue has already been here (though looooong ago) and the cure were to reinstall some dll(s), but I can't remember which ones.
If not already tried this, try w/ reinstalling the whole software bundle from original CD (no drivers, but software only). You can start the installer from CD by running the start.exe which can be found on folder CTRun\.
Hoppas det ?r en l?sning.
jutapa

Problem with SCCM console and Windows 8.1

Can't start SCCM 2012 console in Windows 8.1.
It can't connect to SCCM site.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConfigMgr10\AdminUI\QueryProcessors\WQL]
"Assembly Path"="C:\\Program Files (x86)\\Microsoft Configuration Manager\\AdminConsole\\bin\\AdminUI.WqlQueryEngine.dll"
"Depends On"=""
"Type"="Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager"
This doesn't help.

Windows 8.1 is not supported for the ConfigMgr 2012 SP1 Console.
See for a complete list:
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigConsoleReq
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Can't Get The EAX Consol To Work/App

I have just managed to get the latest drivers installed for the SB Audiology 2 and I am now trying to install the EAX Consol tools. I.E. The Speaker Settings, Mixer, etc.
However the files I have downloaded from the site give me the following error:
Setup Did Not Detect Required Components
Setup Will Now Exit.
The Following Files I am trying to install are:
EAXCONSP0223
SURMIX030206
CMSSetup
SPKSET030206
Any Help Would be greatly appreciated.
Note: The SB Audiology 2 card that I have came with my Alienware system, I have tried to install the drivers from alienware and even though they do install when I try to run the consol tools nothing appears. No matter if I sbl click the EAX Consol icon in the toolbar or if I goto the tools via the start menu.

Password for what?

Creative EAX Console audio effects don't work like before

My audio effects on my eax console used to make a bigger difference. ?I used to use Concert Hall and the reverb effect was much greater just until recently when I downloaded some upgrades creative said i needed. ?I have tried to edit the audio effect individually except there is no edit button like the "help" menus suggests me to use. ?wtf
?HELP!?

Hmmm. You seem to have tried, without success, most if not all of the methods of resolving a Ken Burns black screen issue.
Some thoughts that have occurred to me:
1. Perhaps your G4 500mhz Mac is not fast enough. I think that the minimum spec for iLife '06 is 733mhz. Might have nothing to do with this problem, but I just mention it.
2. Are the sizes of your images too large, as can happen with some of these new high def cameras? iMovie has trouble working with very large images.
3. Do you have any 3rd pary plug-ins, particularly in Quick Time, that could be causing a conflict?
4. Do you have enough disk space for the project to operate?
5. Have you done a recent Quick Time update? Some users have reported a problem with that.
6. From your post, it appears that you have continuously worked within the same iMovie file that exhibits the Ken Burns problem. If this is true, try creating a new iMovie project and experimenting with a few clips to see if the problem persists in the new project.
Ken Burns issues can be very frustrating. I think that you will need to keep trying things until something works. Wish I could be more help, but perhaps some of the tech experts on this forum will have some workable suggestions.
There is an application called Photo to Movie that reputedly has a far better Ken Burns type of effect. If you can't resolve your problem, you might try downloading that app. I believe that it offers a demo download.
Good luck.

SunMC Console on Windows XP not connecting

Hello,
I have just installed SunMC Center on my PC and attempted to login into the SunMC Server but get an error of communication could not be established, the server version may be incompatible.
I am able to connect using another PC, so my SMC server is up and the processes are up and fine. The working PC is on the same segment as my new PC, so I dont know what could be the issue with this PC thats not working.
Has anyone ran into this before? If so, what is not configured?
TIA
LR

Hi,
I had this problem-it is not a firewall issue (I had the problem with
both the firewall on my PC and the server down) but seems
to be a weird software conflict.I posted a message on this some
time ago (displayed below)..
Glad to see somebody else is also having this problem and it is not
just me.Anybody have the console on Windows XP working?
So far all I have found out is that port 23 of the SMC server is being
accessed by the SMC console on the PC (which is not working) but
on the laptop install of the SMC console it is not (this information is from
firewall logs).
Both the SMC consoles on the Laptop and the PC are installed from
the same packages.Both have the same firewall settings,both report the same java version..
Needless to say if you get it working let us know how you did it.
Cheers,
Ian
====================================
I have been trying to get the Java based console
Working from my PC and have found the following
oddments. When I run it from my PC the console fails
with a message saying �Communication could not be
Established with the server. The server version may be
Incompatible� If I then get my laptop, which has the same
Operatating system, same firewall setup, same virus software,
Same java :-
java version "1.4.2_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_03-b02)
Java HotSpot(TM) Client VM (build 1.4.2_03-b02, mixed mode),and the same smc software ,
remove my PC from the network and plug in my laptop in which has the
same IP address as my PC,the console software works! Does anybody have any
idea what could be preventing the console on the PC working whilst the
laptop is fine? I have a few ideas in that the console software installed on some
other pcs does not work as well so there appears to be something in common
Installed on the PC�s (but not on the laptop) which is somehow stopping
the console from working. Now ,my pc is one inherited from the ghost of sys admins
Past but there is nothing as far as I can see which could cause some form of
Conflict-I am mainly focusing on Java based software..What I guess I will have to do
Is to uninstall as much software as I can and hope to eventually find the
Culprit..

Installing Console on Windows 2000

Can anyone help, I think Im just being extremely dense here?
Am I right in assuming that in order to install the Iplanet Directory 5.1 console on Windows 2000, I have to download the software, or find the disk and do a custom installation, installing just the console?
Thanks
Dave

Can I download the Windows 2000 binaries from sun.com? I currently dont have the disks, do you have a link?
Thanks
Dave

EAX Console in Window 7?

Similar Messages

Maybe you are looking for