Eax Console proble

Ok here is the deal, i've been listening to music on my audigy 2 ZS with eax enabled for about a month now and everything has been running fine but for some reason today when i opened it up to go put some effects on none of the presets show up or even the buttons to switch to the Eax effect types. Now i've has this happen to me before and ususaly all i have to do is reinstall my drivers from scratch but thats annoying and there has to be an easier solution.
Thanks for any help.

tribefan9692 wrote:
MY EAX console and speakers just stopped working today, and i cannot figure out why. I have Logitech speakers, and a Sound Blaster Audigy 4. All the presets in my EAX console(Acoustic, Metal, Bathroom, Theater, ect.) were gone. When I exited out of the console, i noticed my speakers weren't working either. Help?
Is your Volume Control icon sitting in the System Tray? If it is bring it up and see if you can launch the EAX console from there.
Dell XPS 600 Intel Pent D 830 3.0ghz
Chipset- Nvidia nForce4 SLI Intel Edition
WD 60gb HD
2gb Ram
DVD-ROM
DVD-RW (Plextor 760A)
Creative XF-I Extreme Music
Logitech X-540 speakers
EVGA 7950GT
Dell 2007WFP (I-SPS panel)
Win XP SP2
BIOS A

Similar Messages

Audigy4 eax console probl

Hello
I've problem with EAX console. I usually listen to music using equalizer in EAX console>>effects>>advanced EQ. But when I want to play a game eg. Battlefield 2, I switch off "enable audio effects", if I don't do that, some sounds in games are inaudible. And again, when I want to listen to music I switch it on to use equalizer. After few cycles of switching it on and off, I can't switch it on and use equalizer (in fact, I can, but there's no options like environment, special FX or equalizer). Because of that sound quality while listening music dro
ps.
Is there anything I can do to prevent that?
Thanks in advance.

Net573,
Sounds like you went through just about every basic troubleshooting step imaginable there. It looks like the first problem was with the card itself so I am thinking we can look past that. One thing that would be helpful in working with this would be to have you post your system specs so we can look into what might be causing this. The most important details are going to be your processor speed and type, your motherboard make and model. Anything else will be helpful.
Jeremy

EAX Console - Karaoke Tab - Voice Suppression & Pitch probl

Hi all,?I hope someone can help me with the EAX console in the Karaoke tab. I have Sound Blaster Audigy2 7..
?The problem is when I?check the box "Enable Karaoke,"? the checkboxes of?"Voice Suppression" and "Pitch" are greyed out (disabled). Thus, the "Microphone effect" and "Microphone volume" are enable. I have uninstalled and reinstalled the software. Any suggestions is greatly appreciated. Thank you,cutieboy?

cutieboy,
Did you install MediaSource Organizer from the installation CD? If not, try installing that too and see if it hel
ps.
Jason

EAX Console issues: An error has occur

Hi there. My name is Emil, 2 years old, and from Gothenburg, Sweden.
I have a SoundBlaster Audigy 2ZS and EAX console , 5. i think. I've searched the board and read the FAQ without any help at all, so i made a new thread.
Yesterday, my EAX Console flipped out, or as a matter of fact, my whole Creative MediaSourcePlayer and all of it's function flipped out. Whenever i try to launch the following program, it says an error has occurred:
Surroundmixer (Surmixer)
EAX Console
AudioHQ
Creative MediaSource Player
THX Setup Console
Speaker Settings
Diagnostics
Graphic Equalizer
I've tried the following things:
) Reboot
2) Installing CMS_PCAPP_LB_3_30_2.exe as stated in the help.
I don't know anything about Hardware, so for me to switch PCIslots and stuff like that is impossible. I have no issues about regedit or stuff like that, but I just can't handle anything concluding the hardware.
Thanks in advance, and regards // Emil Svensson, Sweden.

IIrc, this issue has already been here (though looooong ago) and the cure were to reinstall some dll(s), but I can't remember which ones.
If not already tried this, try w/ reinstalling the whole software bundle from original CD (no drivers, but software only). You can start the installer from CD by running the start.exe which can be found on folder CTRun\.
Hoppas det ?r en l?sning.
jutapa

Audigy 2 - EAX-Console crashes everyti

Hi,
I own the Audigy 2 ZS and have some trouble with the EAX-Console.
When I want to change some settings there (CMSS f.e.) the software just hangs up.
Like 80% of the time and I am not able to restart it, until I do a reboot.
I have the latest drivers, so I tryd that already.
Any suggestions?

I am having the same problem as you guys, I have Audigy2 ZS retail and everything was working fine until I got Silent Hunter 3. It was suggested I re-install the soundcard drivers/software so I tried that. Now my EAX console, Graphic Equalizer, surround sound mixer, creative speaker settings will not open. I've also tried a system restore, uninstall, re-install using the cleansweep method, drivers from disk and online got all updates. I've repeated this four or fi've times and Still nothing. When I tried to open the EQ an error pops up that says nothing in it except a red X. EAX console says "no components registered".
I hope I don't have to re-install Windows just to get this soundcard software working properly agian.
Thanks

Can't Get The EAX Consol To Work/App

I have just managed to get the latest drivers installed for the SB Audiology 2 and I am now trying to install the EAX Consol tools. I.E. The Speaker Settings, Mixer, etc.
However the files I have downloaded from the site give me the following error:
Setup Did Not Detect Required Components
Setup Will Now Exit.
The Following Files I am trying to install are:
EAXCONSP0223
SURMIX030206
CMSSetup
SPKSET030206
Any Help Would be greatly appreciated.
Note: The SB Audiology 2 card that I have came with my Alienware system, I have tried to install the drivers from alienware and even though they do install when I try to run the consol tools nothing appears. No matter if I sbl click the EAX Consol icon in the toolbar or if I goto the tools via the start menu.

Password for what?

Creative EAX Console audio effects don't work like before

My audio effects on my eax console used to make a bigger difference. ?I used to use Concert Hall and the reverb effect was much greater just until recently when I downloaded some upgrades creative said i needed. ?I have tried to edit the audio effect individually except there is no edit button like the "help" menus suggests me to use. ?wtf
?HELP!?

Hmmm. You seem to have tried, without success, most if not all of the methods of resolving a Ken Burns black screen issue.
Some thoughts that have occurred to me:
1. Perhaps your G4 500mhz Mac is not fast enough. I think that the minimum spec for iLife '06 is 733mhz. Might have nothing to do with this problem, but I just mention it.
2. Are the sizes of your images too large, as can happen with some of these new high def cameras? iMovie has trouble working with very large images.
3. Do you have any 3rd pary plug-ins, particularly in Quick Time, that could be causing a conflict?
4. Do you have enough disk space for the project to operate?
5. Have you done a recent Quick Time update? Some users have reported a problem with that.
6. From your post, it appears that you have continuously worked within the same iMovie file that exhibits the Ken Burns problem. If this is true, try creating a new iMovie project and experimenting with a few clips to see if the problem persists in the new project.
Ken Burns issues can be very frustrating. I think that you will need to keep trying things until something works. Wish I could be more help, but perhaps some of the tech experts on this forum will have some workable suggestions.
There is an application called Photo to Movie that reputedly has a far better Ken Burns type of effect. If you can't resolve your problem, you might try downloading that app. I believe that it offers a demo download.
Good luck.

Error when Installing Eax-console as part of Audigy support pack 3.6

<div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem:
I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently I used 3.5 and 3.6 in both OS for a short time.
now I had to format my harddisk an have installed a clean version of Win XP SP3. I installed an update pack (winboard.org), the latest direct X and drivers for nvidia motherboard and videocard. Then, when I tried to install this support pack, I get an error messagge I-00 when eax-console should have been installed, something about CTengine being unable to be installed.
I read through many of the solutions here in the forum, since this error seems to be not so rare. But up to now, nothing helped. This is, what my install.log tells me:
[EAX Console]
GUID={5B7E626-7885-4FC3-A66A-73548A4F0FD}
Warning=I-008 CTRegSvr fails to register C:\Programme\Creative\EAX\Karaoke.exc.
[Common Audio Driver Interface]
GUID={700932B3-A964-4878-82A2-96054622AF7}
Warning=I-007 RegSvr32 fails to un-register C:\Programme\Creative\ShareDLL\CADI\ctcadi.dll.
All other install.log from the other parts of the pack contain no warning. Everything except the EAX-console works fine, if I try to start that, I get an error "No components are registered", an I don't have a "karaoke" register, but otherwise it works well, I can use the effects and cmss.
What the heck could I do?
I made an new thread, since nobody seamed to react to my post in the support pack thread.

HRe: Error when Installing Eax-console as part of Audigy support pack 3.6o What you have is a missing file, or perhaps your system is wanting to install direct X redistributable or something similar. Do a search on your system for install.log and when you find the newest one, or second to newest one, open it with notepad. It will tell you exactly what you are missing. I was trying to install some components for my Elite Pro and it said in the install.log that it could not find DXREDIST. So I copied a version I had to the installing program's folder and it worked!? So take a look at that log and see what is missing......write back with your results if you dont mind. In the original post I had seen the registration problems with components. You can manually run regsvr32 with the /? switch and see how to unregister that yourself and then try the installation again.
Cheers,
jmacguire

Unable to install EAX console, speaker settings, e

I've had problems with audio files skipping and causing the PC to freeze. I'm down to testing the sound card. I've made sure the onboard audio is disabled in the BIOS and I updated to the most recent drivers for my Audigy 2, but I'm having problems bringing up the EAX and speaker settings.
Those are grayed out and unavailable in MediaSource. I did the cleansweep/uninstall procedures, but I still can't get those programs to work right. I downloaded the EAX console and speaker settings, but everytime I try to run them, they quit out since the required components weren't found.
I have my speaker settings set to 5. in Windows, but I have no sound coming from my center or surround speakers and the bass is too loud. I can't change these settings without the EAX console. What's the problem? Why can't I install/access the EAX console?

Lots of info, but no printer model, how you are trying to connect, what operating system.....
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

EAX Console Application encounters errors (cant use it) - Audigy 2 ZS

I bought my Audigy 2 ZS in late 2006 and i used to enjoy the EAX Console, but its always been flaky. Often I have to reinstall it from the CD and that is total crap. I have the latest drivers and the EAX console crashes on me. Where can I get the newest version?
EAX Console Application has encountered a problem and needs to close. We are sorry for the inconvenience.
The Creative Volume console works fine, but I used to like messing witht he EAX console while listening to music, its much better than all the crappy winamp plugins out there, but it seems I can no longer use it.

I'm on Windows XP Pro SP3. I dont see why the app breaks constantly. Even when I got it brand new it failed within a month or 2. The only way I've gotten it to work is to install the drivers and app off the cd constantly. And that is ridiculous. The new drivers shouldnt break anything either, maybe they can update the apps and put them online. So what if someone that doesnt have the soundcards can attempt to use them, I paid good money for my card, because I had creative soundcards that were very good in the past. I just wish the EAX console worked, winamp plugins suck compared to the Creative EAX [email protected]

SB Xi-Fi gaming - x64 vista - EAX console software / "what u hear" ?

Greets,
I'm looking for the software that installs the EAX console, along with the "what u hear" input/recording options. I have the original driver installation cd - but for XP 32bit only, and I'm running vista64 currently. In the past, I downloaded this off the product support page, but the recent drivers I found there are driver only, and some watered-down options software.
The package I'm looking for included 3-5 pieces of software, of which the EAX console was one. Creative WAV studio was another. I don't recall the others.
Namely, I'm trying to find the components that allow me to record "what u hear" speaker output, as I hear it, and additionally reroute speaker output as line-in/mic input.
The BadBoy iso backup links don't resolve any more, not sure where else to find these.
Thanks in advance.

Hi,
The EAX Console is something that's bundled in Audigy cards.
Which X-Fi card do you have exactly, SB X-Fi XtremeGamer?

[FINALLY SOLVED] "Audio device not detected by EAX Console/Speaker Setting Panel" Prob

PROBLEM: A message pops up saying "The audio device supported by this application is not detected" when clicking on any Creative Utilities like EAX Console or the Speakers Control Panel.
SOLUTION: After 6 hours of trying out all solution advices/attempts for the problem above, I figured that there are only 2 ways to get rid of this issue.
[color="#ff0000"]st way: Kill your whole system, by doing format C:
[color="#800000">2nd way: Follow this advice from Shag:
[color="#800000">?
[color="#800000">An installation error causes this problem which in the first instance is addressed by ensuring that you have disabled the onboard audio. If this does not work in the second instance you will need to uninstall the card as follows:
() Uninstall software and drivers either, through control panel or the installation CD
(2) Move the card to PCI slot 3 (if not already there) [VERY IMPORTANT]
[color="#800000">?
[color="#800000">(3) Manually remove registry entries as follows:
. Delete the files from "\Creative".
2. Delete the following registry node from the registry
- HKLM\Software\Creative Tech\Software Installed
- HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uni nstall\5CDDF96A-BC34-4D72-9ABA-EFFF0C39977
(4) Reinstall the software and drivers.
Eventually I'd like to recommend the Creative Team to put this solution in the FAQ, since I counted at least 20 members in this forum, having the same problem without getting to a solution.
Cheers,
Diabolius

BTW just in case people search for the error message in German:
in German the pop up says:
"Das von dieser Anwendung unterst?tzte Audioger?t wurde nicht gefunden"

A dumb question: where can I find the EAX console downlo

Hi guys
I bought a Sound Blaster ZS Notebook card and I threw away the installtion CD after first install. Now I have got a new laptop but I cannot find the same applications as in the CD anywhere in the support web page, but only the driver. Could anyone give me a hint where I can find the download for EAX Console please?
Cheers

Thanks mate, I found the link in "badboy" thread.

Cant install EAX console on Audigy 1 Platinum

- Whenever im trying to install the EAX Console from the?SB Audigy Series Support Pack 3.6 (/09/2009) i get a "Error I-00" and the message "CTEngine cannont be installed".
Any ideas how i could fix that and get the EAX effects running again? Im using XP.

You may be getting this error because the support pack is expecting to install things in a series of ste
ps.
Just going to the folder and double clicking the setup wont work. But you can copy these files from the root directory of the folder to the EAX console folder and install just it.
CmnSupt.cab
CTCabEx.DLL
engine32.cab
Hope this hel
ps.
The author of the package had posted this in an earlier post for those wanting to install individual components.

Where is my EAX CONSOLE on AUDIGY 2 in Windows Seven 64bit??

?as i said, i really need eax console to increase or decrease volume of any of ma speakers. CREATIVE please help me to find solution. Sometimes i need [color="#ff0000"]concentrate all of sound to one speaker ex. rear left whiteout eax console i can't do that.
I buy AUDIGY 2 to have a nice sound and to use all of its features but whiteout proper software and programs is is worse than my nvidia sound on mother bard.
regards and waiting for your soon reply with an solution

Hello jmacguire,
I read your hint above a few weeks ago and then bought a used Audigy 4 Pro card with the intention to use it under Windows 7 x64 (because of missing features in the X-Fi software regarding EAX; compare my thread over there).
Your hint (copying the three files in the EAXCon setup directory) together with Daniel K.'s newest v3.8 Audigy Support Pack worked and I could successfully install EAX Console on Windows 7 x64. I used the same trick to install things like Surround Mixer from the original CD, too.
The driver itself works. The problem is, as soon as I start the installed Creative applications, they either immediately quit with "no supported hardware found" or show up with a GUI, where nearly everything is deactivated; cf. the following screenshot. Only the speaker settings seem to work correctly/as in XP:
How can I get back the functionality like editing EAX profiles, CMSS selection, ... in W7x64. Considering even Creative published a new Audigy series driver on 9th April 2010, which explicitly supports Windows 7 x64, there must be a way to get the software for this card running again, must it not?
Please help me, if you can. Thank you,
orthoceros.

Eax Console proble

Similar Messages

Maybe you are looking for