EBay Ultrabay adapter reporting SATA I with OEM Seagate 500gig HDD installed

I purchased -THIS- recently and when I installed it along with the OEM 500GB Seagate HDD (which is SATA II), RST is only reporting it as operating at SATA I (1.5 Gb/sec).  I then removed the HDD from the adapter and put it back into the main spot and RST then correctly reported it as a SATA II drive.   
Have any of you come across this when using similar eBay Ultrabay adapters?  I am thinking about trying another one on eBay, but don't know if I want to take the chance or not.  Has anybody purchased a Ultrabay adapter off of eBay and having it report the correct SATA interface for an OEM SATA II HDD?
BTW, I have a W520
thanks!

I'd like to confirm JRHawk9's comments. The HDD in the internal bay reports SATA-300/Sata 2, but in the UltraBay reports SATA-150/Sata 1. This is wrong. Bottom line, if I put a SATA 2 device into a SATA 3 connector, it should be reported as a SATA 2 device.
I have also conducted some performance benchmarks against the HDD in both locations. For large file transfers, the speeds are the same. However, for small file I/O (clearly the norm for most computers), the HDD on a SATA 2 connector (the internal HDD bay in this case), was between 5 - 30% faster.
While neither bay saturated the SATA 1 spec, clearly the HDD properly detected as a SATA 2 device allowed it to perform more small file I/O.
What's wrong here? Why doesn't the Lenovo W520 properly detect the OEM Seagate 500GB drive as SATA 2?  BTW, I've contacted Seagate; they tell me it's Lenovo's fault. With the evidence provided here, I have to agree.

Similar Messages

  • Windows will not load on a Satellite A350 with 500GB Seagate external HDD

    There is an issue with this A350-043 Laptop running Windows Vista Home Premium 64Bits, part number : PSAL6C-04S015
    Simply put: when connected to a SEAGATE 9NK2AL-510 500GB SATA DRIVE EXTERNAL USB (s/n: 5QG1YH1E) Windows will not load, it goes upto and freeze just prior to the green moving bars. If the USB cord is pulled out and put back in for a second, Windows continues to load normally and all is well.
    Otherwise, the OS will take up to 15 minutes to load. Looking in the BIOS features, there is no option to boot from USB available, so it cannot be disabled. I have upgraded the BIOS of the Toshiba to the latest version with no change in that issue.
    I have tested and confirmed that the issue persist no matter which USB port is used.
    The external drive is fully fonctional and there is no errors or issues with it when Windows is loaded. I am reported this issue to Seagate as well as Toshiba in the hopes that a solution can be offered on that, but did not hear back on anything as yet.

    You mean the notebook needs 15min to load the Windows OS even if the external HDD is not connected?
    This sounds weird and I doubt this can be related to any software issue
    First of all you should check the booting order in the BIOS the USB should be set at last or second last position.
    Secondly you should check if the same issue would still persist after an new OS installation in some cases the booting procedure could be affected due to installed software and background processes.
    But if the new OS installation does not help and if the issue will still persists then I assume that an hardware problem (motherboard????) could be the reason for that and therefore an notebook technician should be contacted!!!
    Thats my opinion

  • Z60m Ultrabay Adapter for HDD

    Hello all,
    i'm looking for an Ultrabay adapter for HDD to extend my Z60m-system.
    At the lenovo-website, I found an adapter that sould, according to the description, fit into my system.
    Ultrabay Adapter
    Has anyone experience with this model?
    My second question is:  What is the maximum HDD-size (GB) that can I use there?
    In the specifications of the Z60-models, I found the information, that the system is limited to a maximum HDD-capacity of 100GB, or did I misunderstand that?
    Hard drive features:
    Standard 40GB, 60GB, 80GB, or 100GB hard drive sizes
    Specifications Z60
    Do I have to consider this restriction at the "primary HDD-Slot" AND the Ultrabay-HDD-Slot ?
    Thank you.
    Geetings
    Cypher

    the Z60 uses SATA hdd, so anything in 2.5 inch and 9.5 mm thickness format is okay, currently 640 gig is the largest. 
    Lenovo's figure are based on the largest hdd that was available when they released the machine, they don't update these value when new parts come out. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • 12.7mm Ultrabay adapter

    So I bought a W530 with the 320GB HDD, and I have the 12.7mm Ultrabay adapter for another hard drive I'm going to install. I'd like to place the other hard drive, an Intel SSD, into the main drive slot, with the HDD in the Ultrabay adapter. I'm not sure what I need - do I just need the 9mm rails for the Intel drive, or do I also need a caddy for the HDD?

    aangrist:
    What is the size of the HDD, 7mm or 9.5?  If it's the 7mm you will need the adaptor rails in order for it to fit properly. 
    http://support.lenovo.com/en_US/product-and-parts/detail.page?&DocID=PD022801
    Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve a problem you encountered? Mark it as "solution provided" to help others with the same problem.

  • Ultrabay adapter - HDD doesn't show up

    I just bought a new ultrabay adapter for my Thinkpad T400. I put a brand new Toshiba 320GB HDD in it and place into the laptop. The HDD is from another laptop but is still brand new, I bought it from my mate who installed a SSD in his newly bought laptop. 
    Anyways, when I placed the ultrabay adapter in the laptop with the new HDD I got a message that Windows 7 was installing drivers for the new Toshiba drive, standard procedure. But I don't see anything in My Computer.
    The HDD shows up in Device Manager but not in My Computer. See screenshot.
    I tried following these instructions with no luck. I also tried updating the BIOS with no luck.
    The light on the adapter doesn't turn on - perhaps it's somehow switched off?
    Please help...
    Solved!
    Go to Solution.

    Nevermind. I solved the problem. I used Partition Wizard Home Edition to see the disk and created a new NTFS partition on the HDD and assigned a drive letter to it.
    Figured I would post the solution here if someone would experience a similar problem.

  • T61 and SATA Ultrabay adapter

    Over the course of several months and with different versions of Windows, I've tried to get my T61 (8891) to work properly with the SATA Ultrabay adapter. 
    With some SATA drives, it seems to _almost_ work - it will be recognized properly and even read the file system, but there is still enough of a glitch that files get corrupted. 
    On my most recent attempt and with most previous attempts, the Ultrabay and main HDD LEDs just light up solid and the drive in the Ultrabay is never recognized at all.  My most recent try was with a Seagate ST9500420ASG.  I did try limiting the speed to 1.5 using a jumper on the drive, but that didn't make any difference.
    I am able to use PATA drives in the PATA Ultrabay adapter just fine - no problems at all.
    This is a pretty big limitation, though, because all the new faster and higher capacity drives are SATA in addition to all SSDs being SATA.
    Has anyone else had a similar problem?  Any help appreciated.
    Thanks,
    Michael

    Kevin,
    Thanks for the suggestion.  Unfortunately I've tried several times with drives formatted or cloned first in USB enclosures, but none of them have worked properly.
    Some drives do seem to work better than others.  I have had marginal success with a couple of drives in that it will read the file system and the Ultrabay drive access light doesn't stay on constantly.  However, there still seems to be an issue with even these drives.
    For most drives I've tried, the drive is not recognized at all and / or the Ultrabay HDD access LED lights up constantly, which can't be good.
    It appears that Lenovo has sold promoted and sold hardware that is not actually compatible, at least with some T61s.  It is listed as compatible with my T61 (8891-CTO), but has never worked properly.  I even ordered and tried another Ultrabay SATA adapter thinking something might be wrong with that particular adapter, but neither one works properly.
    Thanks,
    Michael

  • Is there really a gap if I purchase and swap the CD-ROM with Ultrabay Adapter III (43N3412)?

    Hi all,
    I want to install a SSD with ultrabay adapter on my w510. But I saw on the forum some people mentioned that there will be a gap if I do so, can anyone tell me if it is true?
    Thanks,
    Solved!
    Go to Solution.

    Yes, it's true, if you buy the adapter from Lenovo as I did for my W520. There are vendors on eBay who claim to have gapless (12.7mm) ultrabay adapters. Some are very cheap. One claims to be selling an actual Lenovo part (but if so, why isn't Lenovo?). I put some pictures up here.

  • Ultra cheap ultrabay adapter

    So after installing my SSD I wanted to use my stock 500GB 7200 RPM drive as a data / backup drive.  Well, funds were limited after buying my Thinkpad T430 and a Samsung 830 256GB lol so I was on the hunt for a deal.
    I think Lenovo charges 59.99 for the ultrabay hard drive adapter...Did some research and found this
    http://www.ebay.com/itm/300598752756?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_sacat%3D0%26_nkw...
    10 bucks, not bad, said it was for a T420 but according to Lenovos website the T420 and T430 use the same ultrabay adapter - I ordered it and it came today, installed the hard drive and it went in the adapter with no problems.  Then put the ultrabay adapter in the laptop - went right in and fits perfectly with no gaps and has a really cool blue light.  I think the one I have is only 3gbps but running the stock platter drive it doesn't really matter.
    Anyone looking for an ultrabay adapter check out the seller on ebay that has these.  I am a very happy customer especially for 10 bucks

    "Just remember that you are using a non-Lenovo supplied adapter if you run into problems down the track.......
    as many others have!
    QUOTE.
    There may be some who will call me a Troll, but I just cannot be bothered by "offshore/after market" hardware;
     I only buy OEM. (Original Equipment Manufacturer.)
    Regards,
    -30-
    I love my LENOVO.
    T 410s, WIN 7, 128 SSD, 64 Ult.
    I do not work for LENOVO.

  • Why my new Mac mini  DVI dual link mini display port adapter doesn't work  with my 30"display (LG W3000H)?

    Hello There
    Can any of you advise on the below? Tried to connect Mac mini with a 30" display through a DVI dual link mini display port adapter. For the first try Mac mini go connected to the display, then i've chosen the highest resolution (2560x1600, native) and right at that moment they got disconected. Since then the display stays black. What can be the issue, is it possible DVI dual link mini display port adapter is not compatible with 30"display (LG W3000H)? It works with DVI male-male cable plus DVI HDMI adapter as long as the resolution stays under 1280x800. Any idea is much appreciated.
    Thank you, Vera

    Hi,
    I can report that my Mac Mini Intel Duo connected instantly and without even having to set it up (on the first try) with my 1366x768 native resolution DELL 50" Plasma Display. It's so beautiful that I just want to stand there and fondle my HDTV as I drool haplessly like Homer Simpson with a doughnut in his mouth. Seriously, no problems.... guess I bought the right cable (ebay).
    Before you buy a Duo, make sure you're aware of the airport and bluetooth issues that so many (maybe everyone who tries to use them together) are having. It seems that bluetooth interferes with airport, or maybe the other way around. Anyway, it's messed up. Also, Airport reception is generally VERY poor with the new Intel Mac Mini.
    Despite these things, I still love mine (I now have 2 base stations and an airport express for my powerhouse wireless needs, and an external DLink bluetooth-2-USB dongle solved the bluetooth/airport issues... in my case).
    FWIW,
    awk
    667-MHz Ti PowerBook G4.   Mac OS X (10.3.9)  

  • T43 - ultrabay adapter not detecting drive

    I just bought  an after market Ultrabay Adapter off ebay for the SATA drive I recently bought. However, when I plugged in the adapter into the cd-rom slot Windows does not detect as a drive. It shows up as new hardware detected, but that's it. What can i do to make the drive detectable in MyComputer ( or how do I access it) ?

    Does it show up in disk management?  Perhaps it needs to be formatted, or is the drive already formatted?
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Steps to generate AWR report from Oracle 11g OEM

    I have gone through online documentation for generating an AWR report from Oracle 11g OEM but the documentation is more focused on generating the AWR report manually. I would request if there is a link or documentation to go through for generating AWR report from Oracle 11g enterprise manager.
    I hope my question is clear.
    Please revert with the reply to my query.
    Regards

    HI ,
    Please check following link: Siva Oracle: How to generate AWR Report from OEM Grid
    Thank you

  • W520 - installing a 7mm SSD in ultrabay adapter?

    I've bought a 9.5mm Crucial m4 256GB SSD for my W520 for some time and now I'd like to get a Samsung 840 Pro 256GB SSD (http://www.amazon.com/Samsung-Electronics-2-5-Inch-Solid-MZ-7PD256BW/dp/B009NB8WRU/), which has a height of 7mm. 
    I've got an Ultrabay adapter and I've been using my original 320GB WD3200BEKT with this adapter and everything seems to be fine. But that drive is 9.5mm in height as well. Now my question is, could I install a 7mm SSD into this adapter?
    Any help is appreciated.

    Yes.

  • ThinkPad Ultrabay Adapter

    Can anyone tell me if the Ultrabay adapter for the W530 comes with a tray and rubber rails for future HDD installation? Or do I have to purchase those items separately from a retailer like Newmodeus such as this?
    Thanks,
    W530 2436-CTO, i7-3820QM, Quadro K2000M 1920x1080 FHD Display, 32GB DDR3 1600 RAM, 500GB 7200rpm Hard Disk

    glad to help you out.
    happy computing!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • T530 ultrabay adapter does't work

    Hello, Who can explain me why not work an Ultrabay SATA hard drive adapter in a T530. Isn't from Lenovo but it works perfectly in any notebook and only the T530 does't work. It's like the device does not exist for T530. Is there any special configuration of the adapter ? A "device present" pinout conf ? Thanks

    The T530 should use the same UB Adapter (III) as the others in the T500 series.  It is distinguished by a  plastic stub protruding from the rear of the adapter.  This stub is what engages the push mechanism that ejects the adapter.
    There was a recent new version of the adapter for the T500 series which is slightly thicker at the opening, and eliminates the air gap.
    The Lenovo Ultrabay Adapter is unique to Lenovo, and is mated to the twp finger slide and push mechanism.  I can't imagine it working in other brand laptops.

  • IDE/PATA HDD UltraBay adapter for T61?

    What is the part number for the UltraBay adapter that fits the T61 and accepts IDE/PATA hard disks?

    the Z60 uses SATA hdd, so anything in 2.5 inch and 9.5 mm thickness format is okay, currently 640 gig is the largest. 
    Lenovo's figure are based on the largest hdd that was available when they released the machine, they don't update these value when new parts come out. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

Maybe you are looking for