EBay website not accessible

In the last couple of months, suddenly I am no longer able to access the "EBay" website while working on my wireless router. I have 3 personal computers, a laptop, 3 android smartphones & 2 ipod touch's. They all work fine, from my wireless router.
I have the WRT54GS ver. 6.
The problem started with not being able to access EBay. I called the EBay people. Then, I called my local Internet Service Provider. There were at least 10 phone calls, to each. Then, I called the Linksys people. The lady told me that I had an outdated router and that I needed to get a new one. Well, I had previously bought the most expensive one I could get, said it was for "optimum" movie & gaming from Cisco. I used it for a few days, and finally quit with it and took it back to the store BECAUSE IT DID NOT WORK NEAR AS WELL AS MY OLD OUTDATED WIRELESS G ROUTER WITH SPEEDBOOSTER!!
The Linksys/Cisco lady told me my equipment was old. But, the newest stuff can't hold a candle to my old one, according to my location, service, etc. My old one works like a CHARM!!
The thing is though, there were no changes made, but suddenly, it would not access EBay. It simply says on the screen "Internet Explorer cannot display webpage". There are NO connection problems. And, then yesterday, there is another website that it won't bring up. So, is this going to be a habit?
When I take my android phones off of using my wireless, and they use strictly the AT&T data, I can get on EBay fine. But, when I switch the phone back to using my wireless router, it won't pull up EBay at all.
Please help!!  

Pearliepix wrote:
I hope I am doing this right. I called EBay I don't know how many times. They said they have not had any one else calling with that issue.
I called my local internet provider. Loads of times. Finally called Linksys/Cisco. The lady told me that I had to pay her to talk. II can't do that. But, she would at least listen. She told me & my local internet provider assured me & still claim it's problematic from my Webroot security stuff.
Today, I decided that I would just turn off the Webroot stuff, just to see. So, I turned it completely off, and it still won't access EBay. I have access for an XBox 360, a PS3, 3 PC's, a laptop, and they all are doing this. The 3 Android phones we have do this as well. You can take the phones off of using the wireless router, and they will go to EBay. Put them back on using the wireless, instead of using data, and they can't pull up EBay. And, now, another website, I think it's www.islandimportsandmore.com - it won't pull it up either. So, I'm hoping that one by one, it's just going to start not accessing sites. The Linksys/Cisco lady told me my stuff was outdated and that's why it wouldn't work. But, it works awesome. Just will not bring up EBay.  
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>tracert www.islandimportsandmore.com
Tracing route to islandimportsandmore.com [174.36.103.150]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms E4200 [192.168.1.1]
2 32 ms 25 ms 39 ms THIS IS YOUR IP ADDRESS (After this would be outside your network!)
3 13 ms 11 ms 14 ms te-5-4-ur01.ogden.ut.utah.comcast.net [68.87.220
.229]
4 9 ms 9 ms 11 ms te-5-1-ur02.ogden.ut.utah.comcast.net [68.86.180
.34]
5 15 ms 10 ms 11 ms te-9-1-ar02.saltlakecity.ut.utah.comcast.net [68
.87.170.29]
6 72 ms 44 ms 28 ms te-0-1-0-4-cr01.denver.co.ibone.comcast.net [68.
86.94.117]
7 24 ms 28 ms 120 ms xe-0-0-0.bbr01.cf01.den01.networklayer.com [75.1
49.228.102]
8 * 47 ms 37 ms ae12.bbr02.eq01.dal03.networklayer.com [173.192.
18.138]
9 38 ms 76 ms 39 ms ae0.dar02.sr01.dal01.networklayer.com [173.192.1
8.213]
10 43 ms 38 ms 38 ms po2.fcr03.sr04.dal01.networklayer.com [66.228.11
8.190]
11 38 ms 152 ms 37 ms fw5.bigcommerce.com [67.228.2.2]
12 37 ms 37 ms 37 ms 174.36.103.150
Trace complete.
C:\Users\Administrator>
Member of the Professional Aviation Safety Specialists Union!

Similar Messages

  • DirectAccess - one website not accessible

    Hello friends,
    I have UAG DirectAccess-Installation running since some years. Now we found one local Webserver (of hundreds) who is not accessible over DirectAccess. From the UAG Server the Website works. From any other place also, but not over DirectAccess.
    On Client ping gives the IPv6-Address -> DNS works.
    Question: What can I do to find the reason/what are the next steps?
    Grüße/Regards, Jens Klein

    I asume the Web Server is located on you internal network.
    There could me many reasons. To point you out to one of them; If your DirectAccess Client is using the Teredo protocol, make sure your DirectAccess Clients can ping the Web Server. By that I mean the Web Server should allow inbound ICMPv4 from
    your DirectAccess Servers, otherwise you won't be able to access it. This is requirement that is sometimes forgotten.
    Boudewijn Plomp, BPMi Infrastructure & Security
    Please remember, if you see a post that helped you please click "Vote as Helpful", and if it answered your question, please click "Mark as Answer".

  • User websites not accessible

    The standard method for putting in a URL for a users site folder no longer seems to be working. What I mean is that ~username does not seem to redirect to the users site folder any longer. Is there somewhere I can see if the automatic setting for this has been changed?

    The error log gives the clue that was missing.
    Apache is trying to serve the document from the DocumentRoot (/Library/WebServer/Documents) which means it hasn't noticed the fact you're asking for a user's personal site.
    That would be caused by the Apache module that handles user directories not being enabled. Without this module enabled, Apache doesn't know about /~username directories.
    The fix is simple - just use Server Admin to edit the list of active modules in your server and enable mod_userdir
    Now Apache will know to look for /~username URLs and handle them accordingly.

  • My bookmarks used to appear in dropdown menu from the address bar on my iMac G5. I switched to Mac Notebook & from Leopard to Lion. Now my bookmarks are not accessible from the address bar anymore (the line where you type in the website address)

    '''My bookmarks used to appear in dropdown menu from the address bar on my iMac G5. I switched to Mac Notebook & from Leopard to Lion. Now my bookmarks are not accessible from the address bar anymore (the line where you type in the website address)'''

    There appears to be a problem with Firefox 20 with UNC paths when using roaming profiles on a server.
    *[[/questions/955140]] why is the 20.0 address bar unresponsive?
    This is currently investigated and tracked via this bug report.
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=857672 bug 857672] - Address Bar not working (roaming profiles;UNC path support OS.File)
    <i>(please do not comment in bug reports: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html])</i>

  • The Secure Store Service application Secure Store Service Proxy is not accessible

    I am working on setting up a new SharePoint 2013 Farm for our external web site which is currently running on 2010 SharePoint. Because this is an External Website for our organization we have an internally available Publishing Site and there is an Web App
    Extension to provide Anon Access to users using the www address. Currently I am doing everything on a single server for testing with HOSTS entries to loop back so I can test with real host headers and not impact the 2010 prod environment. We will be setting
    up 2 more WFEs with a NLB before moving this into prod but it isn't there yet. We brought the Site Collection Databases over but are still running in 2010 mode for now.
    I migrated a copy of the Secure Store Database over from 2010 and had it put on the 2013 Farm's Database Server. Set up Secure Store and the Secure Store Proxy. I went into the Secure Store Proxy in CA and refreshed the Key with the proper Pass Phrase. After
    doing that I could see the Target Application IDs listed. Everything was looking good so I went off to test. If I am on the publishing site I can go to a page that has the solution on it and it operates as expected. It does a query to a non SharePoint database
    and returns information filtered based on the search parameters. The only odd thing I see is if I click on the "Site Actions" I get a message "An error has occurred with the data fetch. Please refresh page and retry." Need to look into
    that more but it only happens on pages that have these solutions. Maybe a clue. If I go to the Anonymous Access page (www......) and try and use the solution, it immediately (way too quick to appear like it is doing anything) comes back with "The security
    token request cannot be completed."
    If I dig through the usage logs I am finding the following.
    The Secure Store Service application Secure Store Service Proxy is not accessible. The full exception text is: The security token request cannot be completed.
    Unexpected exception from endpoint address : https://[Servername]:32844/4e87fd3aabb640fb8cc3ed52188cf5c0/SecureStoreService.svc/https
    Logging unknown/unexpected client side exception: InvalidOperationException. This will cause this application server to be removed from the load balancer queue. Exception: System.InvalidOperationException: The security token request cannot be completed.
        at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForServiceContext(Uri contextUri)     at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress
    address, Uri via)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.GetChannel(Uri address)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName,
    Boolean validateCanary, ExecuteDelegate`1 operation).
    Initially I was fighting a firewall issue because it wasn't working (different errors) on both sides. Had Network Engineers open firewall ports needed and now it works on the publishing side. Still the same error on the Anon side. I suspect I have missed
    something when it comes to configuring the Secure Store to allow access to anonymous connections.
    Let me know if you need any more information but that should paint a pretty good picture as to how things are set up.
    Thanks for any help on this one. Searches haven't found much that has helped so far.

    Hi Sennister,
    I recommend to verify the things below:
    Did this issue occur with all the pages in the anonymous side?
    Check if the Claims to Windows Token Service is started.
    Change the <identity impersonate="true" /> in the web.config to see if the issue still occurs.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible.

    Server Error in '/' Application.
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
    System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4846887
    System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194
    System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +4860189
    System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +90
    System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +342
    System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +221
    System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +189
    System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +185
    System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +31
    System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +433
    System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
    System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +499
    System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +65
    System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +117
    System.Data.SqlClient.SqlConnection.Open() +122
    System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +31
    System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +112
    System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +287
    System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +92
    System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1297
    System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +19
    System.Web.UI.WebControls.DataBoundControl.PerformSelect() +142
    System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +73
    System.Web.UI.WebControls.GridView.DataBind() +4
    System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
    System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +72
    System.Web.UI.Control.EnsureChildControls() +87
    System.Web.UI.Control.PreRenderRecursiveInternal() +44
    System.Web.UI.Control.PreRenderRecursiveInternal() +171
    System.Web.UI.Control.PreRenderRecursiveInternal() +171
    System.Web.UI.Control.PreRenderRecursiveInternal() +171
    System.Web.UI.Control.PreRenderRecursiveInternal() +171
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +842
    Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082

    On what website/link did you received this error message ??

  • IR web client server(0):Database connection information not accessible.

    Hi,
    We upgraded our system from Hyperion 9.3 to EPM 11.1.2.2. We mainly use the reporting tools SQR production and Interactive reporting.
    Using workspace as an admin if I run a BQY everything works fine but when I try to do the same as other users I get the error "server(0):Database connection information not accessible. Processing is disabled" from the
    I have migrated everything form the old version and haven't changes anything since. It looks like a provisioning issue and I tried looking and comparing everything from the present production(old 9.3 system).
    Did anyone else face the same issue before? Any suggestions on where to look into.
    Thank you in advance.

    Hi ,
    You have to go to my oracle support website link is : https://support.oracle.com/epmos/faces/MosIndex.jspx?_afrLoop=7929796452543&_afrWindowMode=0&_adf.ctrl-state=113hdvh7xd_4
    login with your oracle ID and password you have for your company and search for the document number in the "search knowledge base" which will show up on the top right corner of the page.
    The search will show you the document and you can access it.
    Hope this helps.

  • My bookmarks suddenly are not accessible. Each time I try to use a bookmark, the following message comes up on the error page: The requested URL /exec/obidos/subst/home/home.html/103-3592028-6560639 was not found on this server. The page error is ident

    My bookmarks suddenly are not accessible. Each time I try to use a bookmark, the following message comes up on the error page: The requested URL /exec/obidos/subst/home/home.html/103-3592028-6560639 was not found on this server. The page error is identified as "ERROR 404" I tried a clean install of the latest version; no luck. looked at plug-ins & add-ons; no luck
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Hi Mac Attack,
    My computer will not disconnect from the internet.  It seems to find a clone router and continues even when I shut down and unplug my my own home iy
    Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
    If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
    Have a look at your settings in Safari > Preferences. Especially General and Privacy.
    Reset Safari to remove cookies and other stored data.
    System Preferences > General
    Have a look at your settings in System Preferences >  Security & Privacy.
    Call back with more questions.
    Regards,
    Ian

  • Azure Sql connection from azure website not working

    I'm have the following connection problem when connecting to the website is deployed to azure. The site work locally when connecting to Azure Sql using the same account. The site is MVC 4 EF 5.
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
    (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
    Here is my web.config.
    <?xml version="1.0" encoding="utf-8"?>
    <!--
      For more information on how to configure your ASP.NET application, please visit
      http://go.microsoft.com/fwlink/?LinkId=169433
      -->
    <configuration>
      <configSections>
        <!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
        <section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=4.4.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
      </configSections>
      <connectionStrings>
        <add name="MyWhesEntities" connectionString="metadata=res://*/MyWhesModel.csdl|res://*/MyWhesModel.ssdl|res://*/MyWhesModel.msl;provider=System.Data.SqlClient;provider connection string=&quot;data source=localhost;initial catalog=mywhes;integrated
    security=True;MultipleActiveResultSets=True;App=EntityFramework&quot;" providerName="System.Data.EntityClient" />
        <add name="MyWhesContext" connectionString="tcp:ngw4ziez6g.database.windows.net,1433;Database=mywhes;UserID=********;Password=********;Trusted_Connection=False;Encrypt=True;Connection Timeout=30;" providerName="System.Data.SqlClient" />
      </connectionStrings>
      <appSettings>
        <add key="webpages:Version" value="2.0.0.0" />
        <add key="webpages:Enabled" value="false" />
        <add key="PreserveLoginUrl" value="true" />
        <add key="ClientValidationEnabled" value="true" />
        <add key="UnobtrusiveJavaScriptEnabled" value="true" />
        <add key="enableSimpleMembership" value="false" />
        <add key="autoFormsAuthentication" value="false" />
      </appSettings>
      <system.web>
        <compilation debug="true" targetFramework="4.0">
          <assemblies>
            <add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
          </assemblies>
        </compilation>
        <httpRuntime />
        <machineKey />
        <authentication mode="Forms">
          <forms loginUrl="~/Account/Login" timeout="2880" />
        </authentication>
        <pages controlRenderingCompatibilityVersion="4.0">
          <namespaces>
            <add namespace="System.Web.Helpers" />
            <add namespace="System.Web.Mvc" />
            <add namespace="System.Web.Mvc.Ajax" />
            <add namespace="System.Web.Mvc.Html" />
            <add namespace="System.Web.Optimization" />
            <add namespace="System.Web.Routing" />
            <add namespace="System.Web.WebPages" />
          </namespaces>
        </pages>
        <membership defaultProvider="WhesMembershipProvider">
          <providers>
            <clear />
            <add name="WhesMembershipProvider" type="MyWhes.Helpers.WhesMembershipProvider" connectionStringName="MyWhesContext" />
          </providers>
        </membership>
        <profile>
          <providers>
            <clear />
          </providers>
        </profile>
        <roleManager defaultProvider="WhesRoleProvider" enabled="true" cacheRolesInCookie="true">
          <providers>
            <clear />
            <add name="WhesRoleProvider" type="MyWhes.Helpers.WhesRoleProvider" connectionStringName="MyWhesContext" />
          </providers>
        </roleManager>
        <sessionState mode="InProc" customProvider="DefaultSessionProvider">
          <providers>
            <add name="DefaultSessionProvider" type="System.Web.Providers.DefaultSessionStateProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" connectionStringName="DefaultConnection" />
          </providers>
        </sessionState>
        <customErrors mode="Off"></customErrors>
      </system.web>
      <system.webServer>
        <validation validateIntegratedModeConfiguration="false" />
      </system.webServer>
      <runtime>
        <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
          <dependentAssembly>
            <assemblyIdentity name="System.Web.Helpers" publicKeyToken="31bf3856ad364e35" />
            <bindingRedirect oldVersion="1.0.0.0-2.0.0.0" newVersion="2.0.0.0" />
          </dependentAssembly>
          <dependentAssembly>
            <assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" />
            <bindingRedirect oldVersion="0.0.0.0-4.0.0.0" newVersion="4.0.0.0" />
          </dependentAssembly>
          <dependentAssembly>
            <assemblyIdentity name="System.Web.WebPages" publicKeyToken="31bf3856ad364e35" />
            <bindingRedirect oldVersion="1.0.0.0-2.0.0.0" newVersion="2.0.0.0" />
          </dependentAssembly>
        </assemblyBinding>
      </runtime>
      <entityFramework>
        <defaultConnectionFactory type="System.Data.Entity.Infrastructure.SqlConnectionFactory, EntityFramework" />
      </entityFramework>
    </configuration>
        

      <connectionStrings>
        <add name="MyWhesEntities" connectionString="metadata=res://*/MyWhesModel.csdl|res://*/MyWhesModel.ssdl|res://*/MyWhesModel.msl;provider=System.Data.SqlClient;provider connection string=&quot;data
    source=localhost;initial catalog=mywhes;integrated security=True;MultipleActiveResultSets=True;App=EntityFramework&quot;" providerName="System.Data.EntityClient" />
        <add name="MyWhesContext" connectionString="tcp:ngw4ziez6g.database.windows.net,1433;Database=mywhes;UserID=********;Password=********;Trusted_Connection=False;Encrypt=True;Connection Timeout=30;" providerName="System.Data.SqlClient"
    />
      </connectionStrings>     
    Hello James,
    Your Entity Framework Model "MyWhesEntities" connection string is still pointing to a local server, not to SQL Azure; or do you change it during runtime in your code?
    And you should add the "data source=" property name to your second connection string, it's missing.
    Olaf Helper
    * cogito ergo sum * errare humanum est * quote erat demonstrandum *
    Wenn ich denke, ist das ein Fehler und das beweise ich täglich
    Blog
    Xing

  • New location, why is my Gmail account not accessible (off-line)

    I have been using Earthinklin and Gmail, on a 2011 iMac 21.5" and I have several Google accounts through non-profit organizations for drives and mail (although I don't use the mail).  Today I traveled with my iMac about 400 miles and set up to work, but my Gmail is not accessible (off-line), but my wife's account is working fine, and in fact mail defaults to using her account (we share everything).  I have made sure my original Gmail mail account is the one that I'm signed into with this iMac, but Apple mail still says that it is inaccessible.  I'm using a local wifi account to access the internet. Is there a nuance about having multiple Gmail accounts and/or moving my iMac to a new network that is confusing my preferences and/or logins?

    azmyth wrote:
    I have a family share plan, with 2 lines.
    one is stripped to nothing because its no longer being used, and the primary line which is my phone.. has unlimited data etc.
    I got a text from verizon saying i was eligible to upgrade at a discount, and i got a phone call from a local rep telling me the same.
    I logged into my account online, and it shows that I am eligible for an upgrade at discount pricing, or if i wait til november I can get an additional loyalty discount. My trackball on my blackberry is dead, and really want a droid so I was gonna go ahead and upgrade now,
    according to the site, when i choose to upgrade my primary line.. the thunderbolt is 199.99 with 2 year extension and the Droid 2 incredible is 149.99 with extension.
    I called the rep back to double check that this was true, and ask a few other questions before i went to the store today and he told me that it was 249.99 for the TB and 199.99 for the Incredible 2.  I tried to explain to him that i was not a new customer, and that the website said i was eligible to upgrade. He told me he could not sell it to me for that price... what the heck? I don't want to wait to have it mailed but i also don't want to pay 50.00 extra for something I'm am staring at that says i can get it cheaper. He sounded clueless. 
    you are getting another discount for buying online, its often like this

  • A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
    the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
    The system cannot find the file specified
    Cannot connect to COWBOYS.
    Here are the technical details===================================
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
    Error Number: 2
    Severity: 20
    State: 0
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
    timeout)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
    SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    ===================================
    The system cannot find the file specified
    I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
    Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
    many times and cannot connect to my local DB. 
    How do I connect to my Local DB? 
    Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
    instance ID from name). Please uninstall then re-run setup to correct this problem.
    I would happily re install it, if it wasn't my 20th time.
    I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
    May be the solution is very simple, but I am too frustrated. 
    Some of the things I have tried:
    From a command prompt, enter one of the following commands:
    net start "SQL Server Agent (MSSQLSERVER)" OR 
    net start "SQL Server Agent(instancename)"(for instance)
    on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
    Details
    Product:
    SQL Server
    ID:
    2
    Source:
    MSSQLServer
    Version:
    10.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Version:
    9.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

    I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Database table 'e' is not accessible

    Hi all,
    like many others in the web I'm having problems deploying CMP Beans on BEA. I'm using Weblogic 8.1 and
    get the following error message:
    "[EJB:011076]Unable to deploy the EJB 'B' because the database table 'b' is not accessible. Please ensure that this table exists and is accessible."
    After a lot of research I understand the problem now. Weblogic is checking the cmp-fields at deployment time using something like "SELECT xx1, xx2, xxx3 FROM ttt1 WHERE 1 = 0". Some databases have no problem with such a select. My Solid database unfortunately does a full table scan on it. Having only some rows in the table b there is no problem at all, but I have more than 500.000 entries. :-(
    My question: Is there a workaround? Can I somewhere specify the SQL - command for checking mapped cmp-fields? Or can I disable the check somehow?
    I think it is a very annoying problem, many users out there have.
    Thanx in advance
    Robert

    Robert Jung wrote:
    Hi all,
    like many others in the web I'm having problems deploying CMP Beans on BEA. I'm using Weblogic 8.1 and
    get the following error message:
    "[EJB:011076]Unable to deploy the EJB 'B' because the database table 'b' is not accessible.Please ensure that this table exists and is accessible."
    >
    After a lot of research I understand the problem now. Weblogic is checking the cmp-fieldsat deployment time using something like "SELECT xx1, xx2, xxx3 FROM ttt1 WHERE 1 = 0".
    Some databases have no problem with such a select. My Solid database unfortunately does
    a full table scan on it. Having only some rows in the table b there is no problem at all,
    but I have more than 500.000 entries. :-(
    >
    My question: Is there a workaround? Can I somewhere specify the SQL - command for checkingmapped cmp-fields? Or can I disable the check somehow?
    I think it is a very annoying problem, many users out there have.Hi. All commercial quality DBMSes I know, are smart enough to evaluate constant search
    criteria, and not to access all the rows if it's a-priori known that no rows will
    qualify. I would ask 'Solid' for a fix.
    However, you can generate our EJBs with the option of retaining the generated
    JDBC code, which you could alter and recompile for your use. You might be able to
    substitute some DatabaseMetaData call to getTableColumns() to get the same info...
    Joe
    Thanx in advance
    Robert

  • An error The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered after launching a ps1 script from cmd file.

    I'm trying to load sharepoint script from *.cmd file. 
    I have Sharepoint 2010 installed on Windows 7 x64 and SQL server 2008r2.
    My cmd file is: 
    Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
    My sharepoint file 1.ps1 is:
    $snapin="Microsoft.SharePoint.PowerShell"
    if ($action -eq $null -or $action -eq '')
    {<br />
    # Action by default is complete uninstallation.
    $action='uninstall'
    $uninstall = $true
    else
    $action = $action.ToLower()
    switch($action)
    { $_ -eq "uninstall" } { $uninstall = $true; break }
    { $_ -eq "removesolution" } { $removeSolution = $true; break }
    { $_ -eq "deactivatecorpus" } { $deactivateCorpus = $true; break }
    { $_ -eq "deactivatesupport" } { $deactivateSupport = $true; break }
    default { Write-Host -f Red "Error: Invalid action: $action "; Exit -1 }
    Check the Sharepoint snapin availability.
    if (Get-PSSnapin $snapin -ea "silentlycontinue")
    Write-Host "PS snapin $snapin is loaded."
    elseif (Get-PSSnapin $snapin -registered -ea "silentlycontinue")
    Write-Host "PS snapin $snapin is registered."
    Add-PSSnapin $snapin
    Write-Host "PS snapin $snapin is loaded."
    else
    Write-Host -f Red "Error: PS snapin $snapin is not found."
    Exit -1
    $url = "http://pc1/sites/GroupWork/"
    $site= new-Object Microsoft.SharePoint.SPSite($url )
    $loc= [System.Int32]::Parse(1033)
    $templates= $site.GetWebTemplates($loc)
    foreach ($child in $templates){ write-host $child.Name " " $child.Title}<br />
    $site.Dispose()
    The script works fine from the Sharepoint 2010 management shell after launching the shell from the start menu (or from windows cmd by entering powershell -v 2):
    PS C:\2> .\1.ps1 
    PS snapin Microsoft.SharePoint.PowerShell is loaded.
    GLOBAL#0 Global template
    STS#0 Team Site
    STS#1 Blank Site
    STS#2 Document Workspace
    MPS#0 Basic Meeting Workspace
    MPS#1 Blank Meeting Workspace
    MPS#2 Decision Meeting Workspace
    MPS#3 Social Meeting Workspace
    MPS#4 Multipage Meeting Workspace
    CENTRALADMIN#0 Central Admin Site
    WIKI#0 Wiki Site
    BLOG#0 Blog
    SGS#0 Group Work Site
    TENANTADMIN#0 Tenant Admin Site
    {248A640A-AE86-42B7-90EC-45EC8618D6B4}#MySite2 MySite2
    {95629DC2-03B1-4C92-AD70-BC1FEAA49E7D}#MySite1 MySite1
    {7F01CFE4-F5E2-408B-AC87-E186D21F624C}#NewSiteTemplate NewSiteTemplate
    PS C:\2>
    I have an access to the database Sharepoint_Config from current domain user and from other 2 users. All users have db_owner rights to the Sharepoint_Config database. But
    i've loaded in windows from the user which is dbo in the database (dbo with windows authentication with domain\username for the current user). The dbo user has do_owner rights in the Sharepoint_Config database. I've tried to login under other users and launch
    the cmd file but without success.
    My PowerShell has version 2.0: 
    PS C:\2> $psversiontable
    Name Value
    CLRVersion 2.0.50727.5477
    BuildVersion 6.1.7601.17514
    PSVersion 2.0
    WSManStackVersion 2.0
    PSCompatibleVersions {1.0, 2.0}
    SerializationVersion 1.1.0.1
    PSRemotingProtocolVersion 2.1
    After launching the script from 1.cmd file i get an errors:
    C:\2>Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
    PS snapin Microsoft.SharePoint.PowerShell is registered.
    The local farm is not accessible. Cmdlets with FeatureDependencyId are not regis
    tered.
    Could not read the XML Configuration file in the folder CONFIG\PowerShell\Regist
    ration.
    Could not find a part of the path 'C:\2\CONFIG\PowerShell\Registration'.
    No xml configuration files loaded.
    Unable to register core product cmdlets.
    Could not read the Types files in the folder CONFIG\PowerShell\types.
    Could not find a part of the path 'C:\2\CONFIG\PowerShell\types'.
    "No Types files Found."
    Could not read the Format file in the folder CONFIG\PowerShell\format.
    Could not find a part of the path 'C:\2\CONFIG\PowerShell\format'.
    No Format files Found.
    PS snapin Microsoft.SharePoint.PowerShell is loaded.
    New-Object : Exception calling ".ctor" with "1" argument(s): "The Web applicati
    on at http://Pc1/sites/GroupWork/ could not be found. Verify t
    hat you have typed the URL correctly. If the URL should be serving existing con
    tent, the system administrator may need to add a new request URL mapping to the
    intended application."
    At C:\2\1.ps1:48 char:18
    + $site= new-Object <<<< Microsoft.SharePoint.SPSite($url )
    + CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvoca
    tionException
    + FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
    Shell.Commands.NewObjectCommand
    Please help me. I don't understand why the script is launched from the sharepoint management shell but doesn't work from the cmd file.

    I have an answer for my problem:  for solving a problem I've made several steps:
    1. Run farm installation under AD admin credentials - runas /user:Domain1\DomainAdmin1 "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\psconfigui.exe".
    This user has been added as farm administrator in the wizard.
    This user has been added as DBO in the SQL Server. (This is the main difference with my previous attempts)
    2. Execute a command Add-SPShellAdmin Domain1\UserAccount1 in
    the Management Shell of Sharepoint.
    3. Run SQL server and add Sharepoint_Shell_Access to the Domain1\UserAccount1
    (my main account) in the Config database
    4. Run CMD file only from Start->Run menu. 
    runas /user:Domain1\UserAccount1 "C:\1.cmd".
    Do not use Total Commander command prompt or file list for executing *.cmd of *.bat files without root administrator account.
    Thanks all for help.

  • Why does one particular website not open on my ipad*,

    Why does one particular website not open on my ipad, when it alwasys did, but the same website is available upstairs on my PC, I'm using the same remote connection but for some reason it doesn't want to open.  I;ve tried refreshing etc... but nothing works.
    When I bring the ipad to work the website in question opens OK.
    Any suggestions??
    Thanks

    Try updating via iTune (computer)

Maybe you are looking for