Ebay ZEN Vision M AC Wall Charger...Safe To U

Hi. I purchased an AC wall charger for the Zen Vision M from Ebay, as mine didn't come with a mains charger included. It's the type that fits directly into the Zen itself and not the dongle. On the back of the plug it says:
Input : 00-240V 50-60Hz 0.2A
Output : DC 5V A
Any tech people out there confirm it will work and will be safe to use?
Cheers
Tony.

Hi,
You have a zen sleek photo - I have a zen sleek and the adaptor is the same as the vision:m won't that fit's
Weezie

Similar Messages

  • Creative Zen Vision M not fully charging

    (Creative Zen Vision M not fully charging( Hi, I recently bought a refurbished ZVM that doesnt seem to charging properly. When I first got it, it hadnt been charged in quite some time so the battery was overdead. My PC couldnt detect it when I connected it via usb and it didnt even start charging at all. I then connected it to a wall charger and it finally started charging. The strange thing is it never fully charges. I've charged it twice now, both times for at least about 2 hours, and the battery doesnt go more than 50%. And when I connect it to my PC to transfer songs, instead of resuming its charge, my battery runs out. Is this a case of a faulty battery? I li've in Australia and I bought it from the USA. I would prefer not to go through the trouble of returning it if I could. Anything I should do like leaving it to charge for an even longer time? Also one more thing I should mention. When I remove the wall charger and plug it back in, it takes the ZVM sometime to detect it, about 30 minutes or so, and start charging again. Any help or suggestions would be greatly appreciated.

    I have the exact same problem. I just mailed mine in for repair today.

  • Creative Zen Vision M no longer charges with the wall char

    I have had a zen vision M for about 5 months and have never had a problem with it til now. I was listening to it this morning and realised it needed charging so i plugged in the charger as well and all was fine. It seemed to charge for awhile and then it stopped and the charge went backwards. Now every time i plug in the wall charger (that came with the player when i bought it in July 2006) it just shows as being on AC power unless i hold it in a specific position. I have it plugged into my computer at the moment and it seems to be charging. the blue light is on and the battery is showing as charging.How do i know if its a problem with my charger or not - i tried my PSP charger as i had seen that in some posts on here and the same thing happened. I think its something internal. I don't want to send it anywhere as of course its out of warranty and i don't want to pay for anything.Anyone have any ideas. I read something about firmware fixing battery charging ability but then it wipes out FM recording - not that i use it that much but i still use it.Anyway im wondering if anyone has any ideas or if anyone else has had the same problem. I searched high and low but i could only find people with charging problems when they first bought the units.Any help would be appreciated as i like to listen to it at work and my work computer won't accept my player as im not an administrator so i can't install it etc. I need to be able to charge it either at home or at work so i can listen to it. Thanks for your time in advance, i really hope someone can help me as i love this groovy player and i just lectured my sister the other day on how much better than an ipod it is and now it goes and does this. Thanks again

    It seems to have fully charged. I left it on while i went out and it now says it has full battery although it still seems to be charging. Does that mean there could be a problem with the AC charger slot on the adapter? Is there any way to buy a new adapter? if that seems to be the problem. If i upgrade to the latest firmware can i go back to the original if necessary?

  • HELP ! Need help with the MyZenChecker. (Zen Vision:M isn't charging for first ti

    I bought a Zen Vision : M some days ago. It won't charge. I?have WinXP,Service Pack and WMP0. I got GOOD on everything on MyZenChecker. I use the USB at the back. I've also tried with a USB charger which I put into the wall, but that didn't work either. I tried fix2, but I didn't get everything on how to get it work.
    I download it. Double click the .bat file. It comes a black route. It's written that it was succesful. Then after that what should I do in details, please ?
    I tried to restart the computer right after getting successful on the .bat file with the Zen connected. Nothing happens after I turn it on again. No blue light or anything. The computer can't detect it. Am i supposed to connect the Zen after restart ? Should it come a blue light right after restart or should I let charge for 5+ hours without the blue light and then connect it again to get blue light.
    Please tell me what to do in details step by step. Thx
    Message Edited by perry_09 on 07-29-200706:56 AM

    you shd connect it and reboot your PC. the myzenusb.bat is to amend your open up your USB permission. no blue LED light flashing means its not charging. I suggest you exchange this with your retailer since you just bought it

  • Zen Vision M: Unable to charge. Nearly to give product back (forev

    Hello,
    I purchased a Zen Vision M two weeks ago. When I arri've at home I installed the software successfully and then connected the Zen Vision M to my USB poert on my laptop (Win XP Pro SP2) to charge it; no sign of life. No display activity and NO LED CHARGE ACTIVITY. I letf the ZVM an entire night to see if things changed, but no success. I've tried the following:
    - Disable power saving on usb port: no sign of life
    - Gave everyone permission on usb port: no sign of life
    - Push reset button and the recharge: no sign of life
    - Tried on a different PC: no sign of life
    So I retuned to the shop and:
    - We checked with a differnt cable and with a desktop on the shop: no sign of life.
    I asked to change the ZVM with another one. Yesterday, after TWO WEEKS of delay (because the shop had to order since it was the last ZVM they had), I had the new ZVM. Result: NO SIGN OF LIFE once again.
    Note that:
    - my USB ports (of both laptop) works perfectly with other devices
    - my usb ports have power: I have a USB PC Lamp, and a USB Optical Mouse and they works perfectly.
    - I let the ZMV connected to the USB port always more than 8 hour. The Laptop power option was set to avoid hybernate or suspend status
    - No application was running during charge
    I tryed to find a phone tech support, but - despite the statement on the creative site - in italy there is no phone support, just via e-mail.
    If the customer support will not able to resolve the problem I'll give my ZVM back (forever) and I will ask my money back.
    My percption of the problem is that the ZVM have battery completed depleted and USB is not able to provide enough power to charge. But the fact that not even the LED id flashing let me with no clue.
    I kindly ask the community if someone had the same problems, and if there are any suggestion that AT LEAST let my charge led flashing.
    Sorry, for the long post, but I'm really upset with the whole situation.
    Thank you in advance.
    Riccardo

    I am new to these forums. So bear with me. I am in the Oz outback.
    In a possible answer to your problem IlRiccardo I purchased two Zen Vision M units this past week with the same problem. I returned the first unit and got my money back. I purchased a second unit from a different supplier in a another town. Same problem again The second time I did read the supplied booklets in more detail pouring over every word. I found what the symbols in the top right of the screen was suppose to mean. I did purchase units with the Creative supplied powerpack. I was able power the unit up on the external power pack.
    Q. Do you have a symbol that looks like a plug with two prongs on it's
    Q2. What is the version number of the installed firmware?
    I had that symbol on the top right of the screen. I found through a small Product Information booklet that it was to indicate a fully charged battery and operating on external power. RUBBISH (to the charged battery) as it was a brand new unit. The firmware version installed in both ZENs was .30.xx (cannot remember the last two digits).
    I checked the Creative FAQ pages at my daughter's place (in town where I purchased second unit) and found a page listing most of the same symptons as I was experiencing. The download page was talking about a version .50.xx. The link was for a downloadable version of .6.0.
    Subsequently I did download the update file and installed it. Low and behold my ZEN Vision M now showed the symbol for a charging battery. The unit did charge up and is working on the battery. Firmware Version .6.0
    Check with your supplier/shop where you purchased your ZEN to see if this action will void the warranty? My supplier is suggesting it has!!!!. I hope I don't have to go down the warranty path for any reason.
    Hope this helps you and others.
    I have post an almost similarly worded reply in another thread about "not charging" SO it is a firmware version issue in my view.

  • HELP W/ CREATIVE ZEN VISION: M STUFF AND CHARGING PLZ SO M

    ??Hi, I just bought a zv m and dynex uni'versal mp3 accessory kit (I was going to buy the creative stuffs like power?adapter and a/v cable but he said this worked too and it was?more in count ... i checked on the back of it's product and there was compabilitys with some zens and this one:zvm30engbk wich he said was zen vision m 30g black) all right .. so i bought it ( at usa ) and gone home ( at brazil ) ... yeterday at first time?i tried to charge and it didn't work ... the sign of recharging appears and evberything but it just dont charges ( like i can stay all the time using the mp3 with it's plugged but if i unplug it just turn off automatically?) .. .then i got the think that .. maybe is the voltage .. .here in brazil is 0 volts while there in usa is?220?right ? but after charging it on my computer with?creatives cables and etc i gone test the a/v cable and it didnt work well. .the sound was perfect but the image wasn't showing up ... my dad said it was something about pal video config and not ntsc or whatever?.... but anyways i tried alll the ways and?still?got?no image?=/ ... anyone got some idea of whats going on plz? thanks so very much for your attencion and help.

    hi i need your help . i own a vision m and i cant seem to find how to record my fm radio directly into my vision m . i had the 5g and 8 g and they record ok but i just cant find from where i have to go in to find the record button wen listening to radio

  • Zen Vision:M power charger/mains supp

    Hi all.
    Just bought this off Ebay so that I can charge my ZVM in less time than the USB lead takes. I believed when I bought it that it was also a power supply, as in, enabled the ZVM to run off the mains and so not use up the battery. Am I wrong here? And if so, what should I be looking for for the latter?
    Thx to anyone who can help.
    Best
    Troll
    http://cgi.ebay.ie/ws/eBayISAPI.dll?...AMEWN%3AIT&rd=

    When you run your Zen Vision: M off any charger and use it while its plugged in it doesnt take any power from the battery, it uses power from your plug that is transfered through the adapter. Using your Zen Vision:M while charging does slow down the charging process a little bit, but not by much. I hope this explanation has solved your question.

  • ZEN Vision M: Without Charger ...Why

    I?m searching the best mp3 player and, when finally i find it... Does not include a fast charger (for wall socket). What are you (Creative labs) thinking ?Do you think, that i have all the time for expecting for a slow charge by USB port ??Why, do you makes it difficult for customersDo you think, i have?nt enough money for pay it ??What?s happening ?

    When you run your Zen Vision: M off any charger and use it while its plugged in it doesnt take any power from the battery, it uses power from your plug that is transfered through the adapter. Using your Zen Vision:M while charging does slow down the charging process a little bit, but not by much. I hope this explanation has solved your question.

  • ZEN VISION:M CHARGING PROBLEM - H

    [color="#ff0000"]ZEN VISION:M MP3 PLAYER CHARGING PROBLEM?My MP3 player was charging perfectly for the first 4 weeks of its life with me. I usually charged using the USB port on my computer. When connected, the player would come to life and the CHARGING ICON would appear and flash until the unit was fully charged and the CHARGED ICON would come on. Worked well. Now when I connect the player to the computer, instead of the CHARGING ICON coming on, the unit immediately begins playing music or going to the last mode it was in before being shut down previous to connecting for charging.
    I have tried a reset of the whole player but that did not make any difference. I?encounter the same problem when connecting the player to the car?charger/power adapter. Can anyone give me some assistance? Cure?Thanks,? David B.

    Lobsterboat wrote:
    [color="#ff0000"]ZEN VISION:M MP3 PLAYER CHARGING PROBLEMMy MP3 player was charging perfectly for the first 4 weeks of its life with me. I usually charged using the USB port on my computer. When connected, the player would come to life and the CHARGING ICON would appear and flash until the unit was fully charged and the CHARGED ICON would come on. Worked well.Now when I connect the player to the computer, instead of the CHARGING ICON coming on, the unit immediately begins playing music or going to the last mode it was in before being shut down previous to connecting for charging. I have tried a reset of the whole player but that did not make any difference. I encounter the same problem when connecting the player to the car charger/power adapter.Can anyone give me some assistance? Cure?Thanks, David B.
    I have exactly the same problem, but its because i've had to re-install windows and it wont deect it atall. Ive emailed creative support waiting for supply. i hope i get an answer soon

  • Zen Vision M 60GB Player recognition w

    Hello everyone. I have a Zen Vision M 30 GB player that I've had for a year and love it, so I recommended the product to my boyfriend. He received his 60 GB player in the mail today from amazon.com. Problem: Neither Windows Media Player NOR the Creative Media Explorer recognize the player. My 30GB player is instantly recognized on his computer with his cable, and on my computer with my cable. His player is NOT recognized on either machine, with either cable. Because the 30GB is recognized, I've ruled out faulty USB ports or cables as a problem. BUT...he did plug his in and charge it up, and while it was charging, about 0GB of his 30GB music collection was transferred to his player, with no particular rhyme or reason, and no direction from him. Obviously, at one point, it saw the player or it wouldn't have been able to transfer the music that it did. Both computers in question are running Windows XP SP 2 with all current updates applied,?He has emailed customer support, but it's Friday night and we aren't hopeful that we'll hear anything before Monday. Any ideas in the meantime? I searched for an updated driver, but none were posted on the web site. Any help or suggestions greatly appreciated!?~Val in IL

    for new zen vision, you need to charge for 5+hrs in order for PC to recognise itdo you have a charger, it will do a better job

  • Brought a Brand new ZEN Vision M MP3 player but it wont cha

    Mods please reply urgently I have brought a brand new mp3 player it wont charge using the dc charger supplied, it wont charge using the usb ports I cant get the computer to recongnise the player if i umplug the dc adaptor - the only symbol visable in the corner of the screen is a the mains power symbol - I have tried leabing it on to charge but if doesnot thing - I have looked on the creative support pages and on this forum and everyone suggests downloading the new firmware - But it has been suggested that if i do this i will void my warrenty - could you please confirm whether this is the case and if so what would you suggest i do to solve the problem Please reply asap Thanks Marmite

    for new zen vision, u need to charge for at least 5hrs, without enough charge, the PC cannot recognise it. let it charge longer using your DC charger

  • Will my old wall charger for Zen Vision:M will work with the (New) Z

    i bought a wall charger from amazon for my Zen Vision: M 30GB, will it work with the (New)Zen? i just bought the Zen 6 GB and it doesn't comes with an adapter, pretty bad move there, well, does it has the same plug? i hope it's compatible. thanks

    sebastiankf,
    That third party adapter from your Amazon link is hard wired specifically for the Vision:M and will not work with any other Creative player unless it has the same pin-outs using the same docking interface. The Creative AC-5V adapters will either have a coaxial power plug connection that will work with most of the Creative hard disk based players, except for the original NJB and Zen Micro, or a USB Mini-B plug that will work with all of the flash players that have a USB connection and the Zen Micro.

  • Nexxtech USB Wall Charger compatible with Zen Vision

    I was wondering if the?Nexxtech USB Wall Charger (http://http://www.circuitcity.com/ss...oductDetail.do) would work with the Zen Vision M. I'm going on a trip this week and need a cheap wall charger (less than $20)?that I can go to the store and get it (no online orders). Thanks,
    Drake

    hey thanks for the fast reply!
    that sounds good. one more qs:
    is there a cable available that allows to sync & charge directly from player to usb without using the little dongle attachment thingy. I find it ridiculous that Creative went with a propriety connection! I don't fancy lugging that around everywhere...
    thanksMessage Edited by jayneemac on 0-2-200705:00 PM

  • Leaving Zen Vision:M plugged in to wall outlet

    Just bought my ZVM, so I would like to know this. If I power Zen Vision:M through the wall outlet, does it utilize the battery in anyway? Will it shorten the battery life?

    From the Wikipedia: http://en.wikipedia.org/wiki/Lithium_ion_battery
    A unique drawback of the Li-ion battery is that its life span is dependent upon aging from time of manufacturing (shelf life) regardless of whether it was charged, and not just on the number of charge/discharge cycles. This drawback is not widely publicized.
    Guidelines for prolonging Li-ion battery life
    Unlike NiCad batteries or NiMH batteries, lithium-ion batteries should be charged early and often. However, if they are not used for a longer time, they should be brought to a charge level of around 40%. Never use the <I>battery care</I> functions some cellular phones provide for nickel based batteries. (This will deep cycle the batteries.)</LI>
    Li-ion batteries should be kept cool. Ideally they are stored in a refrigerator. Aging will take its toll much faster at high temperatures. Keeping them in very hot cars can kill lithium-ion batteries.</LI>
    Avoid running the battery through "deep discharge" cycles ? that is using it until it's fully depleted to 0 %.</LI>
    Buy Li-ion batteries only when needed. Look at the manufacturing date. That is when the aging process begins.</LI>
    When using a notebook computer running from fixed line power over extended periods, it is advisable to remove the battery and store it in a cool place. <B>However, check the manufacturer's instructions before removing the battery.</B> Many laptop manufacturers recommend against removing the battery from a laptop while it is plugged in, as this can damage a laptop designed to operate with the battery installed. Some manufacturers are also concerned about dust accumulation with the battery removed.</LI>

  • Zen V Plus Wall Charger Quest

    I was wondering if anybody knows if the wall charger that comes with my Motorola Razr V3M Cell Phone will work with the Zen V Plus. If the answer is no are any of the V Plus chargers sold on eBay any good. Thanks for any help.
    Phil

    Probably not. I have a Zen V and could not get my USB charger to work, though I can charge it with the computer's USB port. I am trying to figure out a way to make it work. There are only four wires on a USB connection. One is 5V and the other is ground. The other two being the data. I read somewhere that in order to charge Zen V, it has to "sense " the presence of the charger.

Maybe you are looking for

  • AME CC 2014 Problems

    I've got a couple of problems with the latest Media Encoder, build 8.1.0.122. 1) Nothing moves from the Queue to Encoding. If I click on the "play" button to start encoding files, nothing happens. A blue line under the button, but the files do not en

  • Cannot select multiple images

    I click on the first image, and then hold the shift key and click on a second image, but it only selects the second image.  This used to work!

  • New iMac 24"?

    Hi, I've been thinking about buying a new 24" aluminum iMac for awhile. the only thing that has kept me from doing this is all the screen issues I hear about (gradient problems, etc). Does everyone have these screen issues or is it just a certain num

  • Using an infocube as a infosource to another info cube

    Hi, We are unable to create a link between two infocubes, one as a source for the other. We have used the option of "Generate Export Data Source" option on the source inforcube. While generating itself, it gives an ERROR msg below: "DataSource 8<srcC

  • Mouse Acceleration settings lost on restart or shutdown

    Every time I restart (or shutdown -r via terminal) my powermac it loses it's mouse settings. Strange, because only the mouse speed setting is lost. The setting is set to max when I login after a restart (I never shut down, it's my database, web and f