EBCC Synchronization for Campagins with adSearch

Hi,
We have problem synching campagins defined in eBCC with ad search returned
conent.
EBCC shows incomplete documents and gives
/campaign/Festival.cam/scenario_1/rules.rls and
/campaign/Festival.cam/scenario_1 as incomplete documents.
We tried one of wlcs campaigns(sample) which is based on adsearch also has
the same problem.
We are running EBCC 4.0 SP2 on Weblogic Portal 4.0 SP2.
Thanks & Regards,
UDay

Similar Messages

Frequent index synchronization for table with a lot of data

Hello! I have a table with text column to be indexed. There are a lot of records in the table and the texts in the text column are ofter big enough. The number of records are rising frequently and i need actual search results in any time, so i cant synchronize index 1 or 2 times per day, i need to do it after every insert and i also need to base table not to be locked in anytime i synchronizing index.
So i read the documentation and find a way for me like that:
after every insert on base table do:
ctx_ddl.sync_index('my_index')
And seems like i need to make ctx_ddl.optimize_index() after synchronization.
So will it work fine or i should go another way?
Resuming main goals:
1) I need no locks on base table (or locks on VERY small time);
2) Always actual search results.

You can use sync(on commit) in your index parameters, which will make recent DML searchable immediately. You will still need to optimize and rebuild periodically to eliminate index fragmentation. The more frequently that you synchronize, the more fragmented your index will become. Index fragmentation slows down your queries that use the index. If you have some downtime or slow times such as weekends or nights, then that is a good time to do such things. If not, then you may wish to do so "online" to avoid interfering with searches or DML. Depending on the size of your table and the amount of DML, you may choose to optimize and/or rebuild hourly or daily or weekly or monthly or whatever.

Users are unable to synchronize document libraries with OneDrive for Business

Hello,
We are having an issue with our users attempting to synchronize document libraries with OneDrive for Business. When a user tried to synchronize the document library either via the "SYNC" button on the document library page using IE or by
manually entering the document libraries path into the OneDrive for Business desktop app they receive the following error
"We can't connect to the specified SharePoint site". The users have the Edit permission to both the site and the document library. I have performed the following actions in attempt to get the synchronization to work.
1. Tested giving user the owner permission to the site and document library. same result.
2. Performed a repair on the users Office 2013 installation.
An interesting point to note is that I myself am able to synchronize the document libraries using both the "SYNC" button on the document library site and by entering the path manually in the desktop app. Difference between my account and the test
accounts is that I'm a site collection administrator and farm administrator. Can anyone shed some light onto this issue?

Hi Corey,
According to your description, my understanding is that the users cannot sync document libraries with OneDrive for Business.
I recommend to check the Permission Level to see if the Use Client Integration Features permission is selected.
If not, check this permission in the corresponding permission level which is granted to the users.
Please also check if the users have the right permission to sync the document library with OneDrive for Business.
More reference:
http://nheylen.wordpress.com/2014/05/15/sync-error-we-cant-connect-to-the-specified-sharepoint-site/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I have a macbook pro with mountain lion and now so I can not synchronize my outlook calendar office 2011 for mac with ical and, therefore, with icloude. Can anyone help?

I have a macbook pro with mountain lion and now so I can not synchronize my outlook calendar office 2011 for mac with ical and, therefore, with icloude. Can anyone help?

http://support.apple.com/kb/HT5922
If you want to mirror your desktop, see:
http://support.apple.com/kb/HT5404
Regards.

How to configure time synchronization for two NTP servers

We have IOSXR 4.2.1 on routers CRS3 and ASR9K with all recomended SMUs; we need to configure the time synchronization for two NTP servers with the configuration below, but the routers became unstable; synchronize with one NTP servers for some time, then switch to other NTP server, and keep doing this. Anyone know why this behavior?
ntp
authentication-key 1 md5 encrypted 01070F074F0A05
authenticate
trusted-key 1
server 10.192.32.32 prefer
server 10.192.32.33
source Loopback50
update-calendar
RP/0/RP0/CPU0:DFCRSDTC1#sh log | i ntp
Wed Jul 10 09:37:04.621 BRSPO
RP/0/RP0/CPU0:Jul 4 21:29:18 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.32 : Peer unreachable or clock selection failed
RP/0/RP0/CPU0:Jul 4 21:29:18 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->15.
RP/0/RP0/CPU0:Jul 4 21:29:18 : ntpd[256]: %IP-IP_NTP-5-ALL_CONN_LOST : All NTP peer connections failed.
RP/0/RP0/CPU0:Jul 4 21:29:27 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 15->2.
RP/0/RP0/CPU0:Jul 4 21:30:21 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.32 : Peer unreachable or clock selection failed
RP/0/RP0/CPU0:Jul 4 21:30:21 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->15.
RP/0/RP0/CPU0:Jul 4 21:30:21 : ntpd[256]: %IP-IP_NTP-5-ALL_CONN_LOST : All NTP peer connections failed.
RP/0/RP0/CPU0:Jul 4 21:31:36 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 15->2.
RP/0/RP0/CPU0:Jul 4 21:35:56 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.33 : Peer unreachable or clock selection failed
RP/0/RP0/CPU0:Jul 4 21:35:56 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->15.
RP/0/RP0/CPU0:Jul 4 21:35:56 : ntpd[256]: %IP-IP_NTP-5-ALL_CONN_LOST : All NTP peer connections failed.
RP/0/RP0/CPU0:Jul 4 21:40:11 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 15->2.
RP/0/RP0/CPU0:Jul 4 21:50:52 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.33 : System clock selection failed
RP/0/RP0/CPU0:Jul 4 21:50:52 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->6.
RP/0/RP0/CPU0:Jul 4 21:59:26 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 6->2.
RP/0/RP0/CPU0:Jul 4 22:25:07 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.33 : System clock selection failed
RP/0/RP0/CPU0:Jul 4 22:25:07 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->6.
RP/0/RP0/CPU0:Jul 4 22:56:16 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.33 : Peer unreachable or clock selection failed
RP/0/RP0/CPU0:Jul 4 22:56:16 : ntpd[256]: %IP-IP_NTP-5-ALL_CONN_LOST : All NTP peer connections failed.

Hi Claudio, that ddts is pretty generic to be honest but yes it is filed to address sync issues in the XR NTP algo.
The thing is that XR ntp clock selection is a bit different then iOS and follows the specs very closely which results in this erroneous loss behavior.
For instance, you could also see this issue with a sync loss if the update time is only 500msec off what it was before and that will result in a ntp sync loss rather then adjusting to it.
Also I wanted to mention that the ntp prefer is a bit of a misnomer in XR (since it follows the specs differently then IOS) and this knob was taken over from IOS really.
You might get some joy if you set it to one server only and see if that helps?
regards
xander

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

What is the recommended way to do multiple channel, single point sampling for control with an NI PCI-6255 in RLP?

Hello,
I am writing a driver for the M-series NI PCI-6255 for QNX. I have downloaded the MHDDK and have all the examples working. I have also enhanced the examples to do interrupt handling (e.g. on AI_FIFO interrupt or DMA Ring Buffer interrupt). My ultimate goal is to write a driver that I can use for closed-loop control at 500 Hz using all 80 channels of the NI PCI-6255. I may also need to synchronize each scan with a NI PCIe-7841R card for which I've already written a driver. I want an interrupt-driven solution (be it programmed I/O on an interrupt or DMA that generates an interrupt) so that the CPU is available to other threads while the 80 analog inputs are being read (since it takes quite a while). I also want to minimize the number of interrupts. Basically, I will need to collect one sample from all 80 channels every 2 milliseconds.
There are many different options available to do so, but what is the recommended technique for the NI PCI-6255 card? I tried using the AI FIFO interrupt without DMA, but it seems to interrupt as soon as any data is in the AI FIFO (i.e. not empty condition), rather than when all 80 channels are in the FIFO, so more interrupts are generated than necessary. I tried using DMA in Ring Buffer mode to collect a single sample of 80 channels and interrupting on the DMA Ring Buffer interrupt, which appears to work better except that this technique runs into problems if I cannot copy all the data out of the DMA buffer before the next AI scan begins (because the DMA will start overwriting the buffer as it is in ring buffer mode). If the DMA is not in ring buffer mode or I make the ring buffer larger than one 80-channel sample then I don't have a way to generate an interrupt when one sample has been acquired (which I need, because I'm doing control).
I saw something in the documentation about a DMA Continue mode in which it looks like you can switch between two different buffers (by programming the Base Count/Address with a different address than the current address) automatically and thereby double-buffer the DMA but there is no real documentation or examples on this capability. However, I think it would work better than the Ring Buffer because I could interrupt on the DMA CONT flag presumably and be copying data out of one buffer while it is filling the other buffer.
Another option would be DMA chaining, but again, I cannot find any information on these features specific to the NI DAQs.
I tried interrupting on AI STOP figuring that I could get a single interrupt for each scan, but that doesn't appear to work as expected.
I know that DAQmx on Windows has the ability to do such single sample, multiple channel tasks at a fixed rate so the hardware must support it.
Any suggestions would be appreciated.
Thanks.
Daniel Madill

Hello,
The interrupt that will happen nearest the times that you need is the AI_Start_Interrupt in the Interrupt_A group. This interrupt will occur with each sample clock. By the second time this interrupt fires, the AI FIFO should have the samples from the first conversion. If it is easier to use programmed IO, you can read the samples out of the FIFO until you get all 80.
Additionally, you can set the DMA to send samples as soon as the FIFO is no longer empty...instead of waiting for half full or full. This change will reduce latency for your control loop. You can set AI_FIFO_Mode in AI_Mode_3_Register to 0. By the second time this interrupt fires, you should be able to check how much data is in the DMA ring buffer and read the 80 samples when they are available. You can make the ring buffer larger than 80 samples if you see data getting overwritten.
There is no interrupt associated with 80 samples being available in the FIFO or 80 samples being available/transferred by DMA to the host. X Series has much more flexibility with these interrupts.
I hope this helps!
Steven T.

Outlook 2011 for Mac with Microsoft Exchange 2007/2010

Hi,
For already a fews days I am troubleshooting a Mac Outlook 2011 <> Exchange sync issue. I've got exact the same symptoms in two totally different environments.
- Environment one:
Exchange 2007 SP3 RU 14 (8.3.379.2)
Outlook 2011 14.4.7
- Environment two:
Exchange 2010 SP1 RU 8 (14.1.438.0)
Outlook 2011 14.4.7
Problem:
Autodiscover and EWS synchronisation test from Microsoft Exchange Connectivity Analyzer is succesfull. Configuring an new (Exchange) e-mail account with Outlook2007/2010/2013 fully based on autodiscover works with no errors.
Configure Outlook 2011 based on autodiscover when connected to the internal LAN works. Configure Outlook 2011 based on autodiscover or by hand doesn't work from WAN.
I am unable to synchronize Outlook 2011 with Exchange when WAN connected (No error in logging). I am able to synchronize OS X Mail (Default OSX Mail client) with the same Exchange server.
Conclusion: the autodiscover function that Outlook 2011 uses does not work from WAN, the autodiscover function that Outlook 2007/2010/2013 and Exchange Connectivity Analyzer is using does work from WAN. Do I need to configure something special for synchronization
with Outlook 2011 other than explained above when working from WAN?
When testing EWS with 3th party tooling(EWS Editor) and Exchange Connectivity Analyzer everything is working as it should be. (all mailbox data is shown). If you need any more information about the context I am happy to provide.
Regards,
Mikkie van Falier

Hey hpujary.
Welcome to the BlackBerry Support Community Forums.
At this time, only contacts can be synchronized with BlackBerry Link software and a BlackBerry 10 Smartphones. The functionality to provide more options for PIM synchronization may be added in the future. I cannot say for certain that the issue outlined in KB27248 is resolved for BlackBerry 10 Smartphones as the functionality does not exist to confirm.
Cheers.
-Sawks
Come follow your BlackBerry Technical Team on Twitter !@BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)

How to synchronize Outlook 2010 with SAP Calendar

Hello colleagues,
How to synchronize Outlook 2010 with SAP Calendar??
Thanks

Install MfE (Mail for Exchange), then follow this: http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=147951
You can sync your mail, contacts and calendar with Google Sync. Tasks and notes are not supported. (Notes syncing is not possible with MfE anyway.)

What is happening about Java System Identity Synchronization for Windows

I have been playing with "Java System Identity Synchronization for Windows" for a while now. I am about to swich over to is 100%, but I am worried that the latest version is "Windows 1 2004Q3".
Has any one got any ideas about this. The product sort of works, and is much smaller that going for the whole "Java System Identity Management Suite 2005Q4" which is way to big and complicated for our and I think many people.
Don't forget Microsoft have now release its own tools to do this in the latest Windows 2003 SP.
Andrew

ISW is already present in the 5.2p4 and 5.2p6 archives.
dn: cn=pswsync,cn=plugins,cn=config
objectClass: top
objectClass: nsSlapdPlugin
objectClass: ds-signedPlugin
objectClass: extensibleObject
cn: pswsync
nsslapd-pluginPath: /export/home/abc/local/ds52p6/lib/psw-plugin.so
nsslapd-pluginInitfunc: pswsync_init
nsslapd-pluginType: preoperation
nsslapd-pluginEnabled: off
creatorsName: cn=server,cn=plugins,cn=config
modifiersName: cn=server,cn=plugins,cn=config
createTimestamp: 20090121011643Z
modifyTimestamp: 20090121011643Z
nsslapd-pluginId: Identity Sync for Windows
nsslapd-pluginVersion: 5.2_Patch_6
nsslapd-pluginVendor: Sun Microsystems, Inc.
nsslapd-pluginDescription: Identity Synchronization for Windows Plug-In

Can I synchronize my iDevice with Aperture database on external volume?

Hi everyone,
I'm a photography enthusiast and I would always take photos.
Recently, my built-in harddisk was full and I transferred my photos to an USB-connected 2.5" external harddisk. That's not the problem - I can browse and edit the photo freely whenever I plug in my external harddisk.
But when I tried to synchronize my iPad with a database on the external volume, the problem comes. iTunes told that it cannot find the aperture database (in local drive) and I have no idea to match it with my current database.
Who can give me a solution? Thanks!
ALC
(Sorry for my poor English as I'm not an English native speaker)

Hi Ap Lei Chau,
Your English is fine.
Though I do not have a iPad, I do have an iPhone. With my iPhone plugged in, open iTunes, under Devices click my phone, then Photos tab mine reads Aperture. Clicking that drop down I have a option to choose Folder. From there I can walk the path to an Aperture library.
It is my hope it appears the same in an iPad.
Cordially,
RicD

ICloud does not synchronize Outlook 2007 with ipad

I want to synchronize outlook calendar with iPad calendar. I installed ICloud on the PC, choosed calendar for synchronizing, allowed iPad to synchronize with iCloud and started. The first synchronization worked. Both calendars on Outlook and iPad looked the same. Now I thought, that any new thing on each of the calendars would be pushed immediately to the other calendar. This does not work. Is there a time limit or did I need to make some more changes?

Here's the solution provided by Risco in the iPhone 3GS forum. It's the only one that I found that works for exactly the same problem on both the iPhone 3GS and the iPad. I might add that I was also getting two other error message every time I connected to iTunes ("Mobile Sync stopped working," and "Yahoo Go Sync stopped working").
Here it is (for Windows):
Go to Program Files ( x86 if using 64 bit )
Open Common Files
Open Apple
Open Apple Application Support
Copy the Sqlite3.dll
Go to the windows folder
Open system32 if on 32bit, or syswow64 if on 64bit
Find the sqlite3.dll
Rename it to sqlite.dll.bk (if none there, go directly to Paste step below)
Paste the new one in there
Open iTunes and it should sync everything fine and no errors!

Can't configure Identity Synchronization for Windows through Server Console

Hi everybody!
I am trying to get Sun Java System Directory Server EE talking with Windows Active Directory buy my progress has come to a halt getting Identity Synchronization for Windows 6 configured and working. I would appreciate any hints!
Here are the steps I have taken:
1. I installed Directory Server Enterprise Edition 6.3.1 using native packages, no problems there (in terms of adding resources to directory, browsing them, etc).
2. I installed the Message Queue (3.6 05Q1) that is bundled with the zip archive of DSEE
3. I installed Identitty Synchronization for Windows (6), that is bundled with the zip archive of DSEE
4. Logged into Sun Java System Server Console as per instructions after install.
Here is where I am stuck!
I logged in, but something is really weird! Here is what my structure looks like in the default view:
domain name
+Server
++Server Group [desc: Directory Server 6.0 /opt/SUNWdsee/ds6]
++Server Group (1) [var/mps/serverroot]
+++Administration Server
+++Identity Synchronization for Windows [details are totally blank... even icon is an empty blue square!]
This is the second time I went through the process of installing all this stuff, I made sure to pay attention to the installation instructions as best as I could, but I am very new to Solaris and unfortunately am on an extremely tight deadline.
I am suspecting the problem has something to do with ports or directories, but my knowledge of Solaris is not even at a level where I can troubleshoot this by myself. Even if you have some advice that seems stupid to you, please let me hear it! I am pretty stupid, I might benefit from it!!
Please, if anyone has any hints or suggestions, I would love to hear them. Like I said, I configured all this while following the installation guides, but I am worried I missed something or misunderstood something.
Thanks in advance,
Al
Edited by: newtmonkey on May 25, 2009 2:05 AM

Hello wlier, thanks for all your help with this! I really appreciate it.
Reinstalled this whole thing, and at least I got everything under one server group... still can't access ISW though... it is listed in the leftside pane, but when I click on it the rightside pane goes completely blank.
~status of idsnyc is:
-no connectors were found
-System Manager Status: Started
next step is "1. create an initial configuration using the product's console..."
~installed/configured everything as root
~no errors generated when I login to the console, but when I expand the hostname in the leftside pane I get the following error:
Exception in thread "Thread-2" java.lang.UnsatisfiedLinkError: /usr/lib/mps/libjss4.so: ld.so.1: java: fatal: libnss3.so: open failed: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1676)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:993)
at org.mozilla.jss.CryptoManager.loadNativeLibraries(CryptoManager.java:1443)
at org.mozilla.jss.CryptoManager.initialize(CryptoManager.java:912)
at com.netscape.management.client.util.UtilConsoleGlobals.initJSS(Unknown Source)
at com.netscape.management.client.util.UtilConsoleGlobals.getLDAPSSLSocketFactory(Unknown Source)
at com.sun.directory.wps.ui.gui.view.PSWServer.<init>(PSWServer.java:71)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at com.netscape.management.client.topology.ServerNode.createServerInstance(Unknown Source)
at com.netscape.management.client.topology.ServerNode$ServerLoadThread.run(Unknown Source)
~If "run the Administration Server from the Server Group" means what I think it means, I can do that with no problem. I can double click on the Administration Server and configure various options, start/stop the server, etc.
~I just have one interface/hostname configured, and the Server Console shows the correct name
It's like it's not making the connection to the ISW server (btw, it is listed as "isw-solaris1"... is this okay? "solaris1" is the hostname for this server). From what I understand after logging in to Server Console as Directory Manager, it should be asking me for a password to access ISW, but I don't any kind of login/password prompt.
I should be logging in to Server Console on the port I configured during ISW installation, right? In my case, port 1390.
We don't have a service plan and I doubt my company would want to spring the cash for it, so I'm pretty much stuck!!

Synchronize SAP Roles with IDM Roles

Hi, i have a question concerning SAP integration in IDM.
Is it possible to import the Roles from SAP (named Activity groups) in IDM? And how does the "synchronize identity system roles with resource roles" function work?
Thanks in advance!
gojo

The job synchronizes FND Users with the Workflow directory service (plus any other systems you specify). PER is a special case, and will only be synchronized with the Workflow directory service if they are associated with a user - otherwise the records are not included. If they have corresponding HZ_PARTY records, then these may be synchronized, but should not really be used for notifications, since there is no login mechanism for the users to view the notification sent to a party record.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Identity Synchronization for Windows- still supported?

Hello,
I am doing some testing for a customer who is interested in syncing up his Active Directory and System Directory Server information, so I have been trying to build this solution in our lab.
From what I have read, this can be done with Identity Synchronization for Windows.
Identity Synchronization for Windows requires that Message Queue be installed.
I installed Message Queue 4.3 but when I ran the Identity Synchronization for Windows installer I was told that I need the Enterprise Edition of Message Queue (is looking for a license file). However, according to the Sun page on Message Queue, Platform Edition and Enterprise Edition have been rolled into one product.
So I have three questions. First, is Identity Synchronization for Windows supported on Message Queue 4.3? If so, how to get by the error message asking for Enterprise Edition? If not, is my only alternative to use an older version of Message Queue?
Thanks in advance,
Al

is Identity Synchronization for Windows supported on Message Queue 4.3From the release notes, looks like the answer is no.
http://docs.sun.com/app/docs/doc/820-2759/additional-software
When installing Identity Synchronization for Windows, you must specify the path to the version of Message Queue to use. The Identity Synchronization for Windows installation program then installs a required broker into Message Queue, so that Identity Synchronization for Windows can use Message Queue for synchronization.
On Windows systems, Identity Synchronization for Windows supports only Message Queue 3.6. You therefore install Message Queue 3.6 provided with the Identity Synchronization for Windows bundle.
Message Queue 3.7 is, however, installed as a Java Enterprise System shared component. On Windows systems by default you can therefore end up with both Message Queue 3.6 and Message Queue 3.7 installed. If you install Java Enterprise System components alongside Identity Synchronization for Windows on a Windows system, be sure Message Queue 3.7 is not selected.
---------------

EBCC Synchronization for Campagins with adSearch

Similar Messages

Maybe you are looking for