EBMS/AS2 Multiple Business Actions with the same document

We have an issue where we have a single document type (OrderResponse) that will have a different Business Action depending on which partner it is coming from.
In testing this, we've found that the Business Action we setup in B2B MUST_ have the same name as the Business Action shown in the SOAP envelope of the received message (the user guide DOES NOT mention this AFAIK)
To make matters worse - the same document is also used by another trading partner with AS2 which has NO SOAP envelope.
So basically we have these combinations:
TP# > XMLDocType > eb:CPAId > eb:Service > eb:Action
TP1 > OrderResponse > OrderCreate > uri:OrderCreate > SendResponseEnd
TP2 > OrderResponse > OrderCreate > uri:OrderCreate > SendFileResponse
TP3 > OrderResponse > (n/a) > (n/a) > (n/a)
Now, in setting up TP1 & TP2, we define 2 Business Actions for SendResponseEnd and SendFileResponse with the DocDefs using Action (no XPath).
When TP3 comes along, we try setting up another Business Action with XPath. But that causes the first two to fail because it checks XPath first.
If we could only get around the Business Action name requirement this would not be an issue as we could just define a single DocDef and Business Action for OrderResponse using XPath.
Can anyone see a way to make this combination work? Does this same problem exist in 11g?
We are currently on Release 10.1.2, Build B2B_10.1.2.4.0_GENERIC_091027.

1) Patch 8703410 applied on Wed Nov 25 09:43:24 CST 2009
[ Base Bug(s): 7652646 7497854 7664370 8708445 7661101 7007789 6352814 6802446 7665607 7641078 6496457 6013963 8330151 7305413 8619657 7460584 7529893 7458954 7020996 8393885 8210401 6329207 6740403 7126458 6511970 8783577 7379065 7230993 8704965 6774631 7198642 8309511 8392729 7661769 7605518 7479148 6733262 8349002 6736026 7322333 7242500 7239355 8746561 8344645 8451004 7645440 6747966 6369424 6737334 8339176 6774134 7046561 6412124 7210461 7506319 8630406 8235175 7258882 7184318 6453359 7456866 7673646 6043277 7457597 6769895 7193710 8239170 7668247 8404955 8612841 7261965 7132740 7485790 6518386 7305363 6852370 6433256 7673431 6764239 8360048 7501748 7379153 8281019 7498031 8216457 7046574 6875312 6754906 6656289 6417367 7658271 7556011 7000190 6979467 8594506 8691820 6852308 8475848 8518443 7600385 7211208 6732051 8524862 7461051 8263026 7609467 7379161 7672714 6353293 7157229 7594997 7211287 7034069 7563311 6822375 6640935 7359202 6769261 6919593 8601869 6029507 6974391 7139013 7518641 8605719 6817264 7501903 7496014 7576785 8666761 7130151 7322581 5523563 7680097 8508905 7241737 7660780 8480395 7660781 7191994 6924921 7672723 8432093 6800745 8703404 8540335 8507242 8608121 8217566 7481317 6639030 6200414 7529795 7354853 8475867 7376270 7303860 7016005 7678901 7368610 8992520 6881977 6016128 7033061 6397084 7672730 8703410 7709562 6449656 7045589 8508054 6491068 7378745 7643811 7435853 7615836 8707416 6447557 7379042 6940476 7670634 6950383 6764273 6962327 7478322 8546454 7157324 8871403 8862082 7184219 7672744 7164618 7672745 7230184 7576730 7590301 8746541 7261863 8327427 6769430 8295683 7526186 8298731 6414280 6139955 6646997 7692853 8233048 6794296 7457066 8552373 8225241 7706387 7204022  ]

Similar Messages

  • Problem running multiple folder actions at the same time

    Hi,
    Does anyone have some experience running multiple folder actions at the same time?
    I've written a Applescript folder action that processes some files. When adding some files, the script starts and all goes well. The processing of each file takes a few minutes, but all files are processed correctly.
    However, when adding some new files to the dropfolder, while the folder action is all ready processing other files dropped a few minutes earlier, the process that is all ready running immediately aborts and the folder action is relaunched on the new files, leaving the old files for what they are...
    The same problem occurs with multiple folders, each having a folder action attached. When dropping files in "Folder A", the script starts processing. But if someone droppes files in "Folder B", The script of folder A aborts, and the script of folder B starts processing. When adding more files to the folders, the result is the same. In some casses, when the last dropped files are processed, the os continues where the operation was aborted on the previous files. But this not always happens. To make things worse, when you remove the items from the folders afterwords, the folder actions starts running again on items no longer present in the folder !!!!
    Does anyone know how I can prevent the folder action being aborted when new files are dropped and placing the new files in "Hold", until the previous files are processed? How can I prevent a folder action being aborted when a item is dropped into another folder?
    I've written a small script to test this behaviour. Just create one or more folders and attach the script below. Drop a item into the folder, wait a few seconds and drop another one in the same or another folder. To monitor what happens please check the console.
    on adding folder items to this_folder after receiving added_items
              set FolderName to this_folder as string
              set ItemName to added_items as string
              repeat with theIncrementValue from 1 to 15
      delay 2
                        do shell script ("logger \"Folder: " & FolderName & "  -  Item: " & ItemName & "  -  Step: " & theIncrementValue & "\"")
              end repeat
              do shell script ("logger \"Folder: " & FolderName & "  -  Item: " & ItemName & "  -  Done...\"")
    end adding folder items to
    Thanks for any feedback.

    That is pretty much the way Folder Actions work, especially since AppleScript is not multi-threaded.  If you are using them as some intermediate step in a workflow, you might rethink the way you are handling the files (for example, use a droplet instead).  Other options would be using launchd to watch a path or a shell script on a different thread.

  • How to apply different keyboard shortcuts to an actions with the same name but in different menus within one application?

    Hi,
    Hopefully someone can help. I have the application "djay" and in two different menus there is the action "Eject". I was wondering if it's possible to apply different keyboard shortcuts to those actions with the same name? I can't see how to do it as it seems you can only write the action but as there are two it doesn't seem to work for me.
    For example:
    djay>Table-1>Eject - ⌘⇧1
    djay>Table-2>Eject - ⌘⇧0
    Thanks in advance for any help!!

    A NodeList doesn't only contain 1 element. In your example it contains ALL <Data> elements inside the document.
    NodeList nodes = document.getElementsByTagName("Data");
    System.out.println(nodes.getLength() + " \"Data\"-elements found");
    for(int i=0; i<nodes.getLength(); i++) {
       Node node = nodes.item(i);
    }

  • HT204053 can i have multiple iCloud accounts with the same Apple id

    Can i have multiple iCloud accounts with the same Apple id

    Welcome to the Apple Community.
    No, your ID is essentially your account. You can have email aliases and you can have multiple accounts, but I don't think that's what you are asking.

  • Can I have multiple event structures with the same event cases?

    Hello, 
    I'm doing an application that reproduces the front panel of the HP6675A power supply. To achieve this, I have done a state machine with different states
    (initialize, measures, voltage, current, ocp, ov, store, recall, etc). In each state, should have an event structure that catches the events of the buttons, like for example: if the current state is the Voltage mode and the user press the current button the next state will be the Current mode. For this in each state of the state machine should be the same event structure with the same events.
    My problem is that the Vi doesn't work properly when I have multiple event structures with the same event cases. There are some possibily to do this, and how? Or is impossible to have multiple events? I have been reading some posts, but I don't find solutions. 
    Any help is appreciated.
    Thank you very much.
    Solved!
    Go to Solution.

    natasftw wrote:
    Or as others mentioned, make two parallel loops.  In one loop, have your state machine.  In the other, have just the Event Handler.  Pass the events from the handler to the state machine by way of queues.
    A proper state machine will not need the second loop.  The "Wait For Event" or "Idle" state (whatever you want to call it) is all you really need in order to catch the user button presses.  The setup is almost there.  Maybe add a shift register to keep track of which state to go to in the case of a timeout on the Event Structure.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • RE: multiple named objects with the same name andinterface

    David,
    First I will start by saying that this can be done by using named anchored
    objects and registering them yourself in the name service. There is
    documentation on how to do this. And by default you will get most of the
    behavior you desire. When you do a lookup in the name service (BindObject
    method) it will first look in the local partition and see if there is a
    local copy and give you that copy. By anchoring the object and manually
    registering it in the name service you are programmatically creating your
    own SO without defining it as such in the development environment. BTW in
    response to your item number 1. This should be the case there as well. If
    your "mobile" object is in the same partition where the service object he is
    calling resides, you should get a handle to the local instance of the
    service object.
    Here is the catch, if you make a bind object call and there is no local copy
    you will get a handle to a remote copy but you can not be sure which one!
    It end ups as more or less a random selection. Off the top of my head and
    without going to the doc, I am pretty sure that when you register an
    anchored object you can not limit it's visibility to "User".
    Sean
    -----Original Message-----
    From: [email protected]
    [<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
    Sent: Monday, June 22, 1998 4:51 PM
    To: [email protected]
    Subject: multiple named objects with the same name and interface
    All,
    More than once, I have wished that Forte allowed you to place named
    objects with the same name in more than one partition. There are two
    situations in which this seems desirable:
    1) Objects that are not distributed, but are mobile (passed by value to
    remote objects), cannot safely reference a Service Object unless it has
    environment visibility, but this forces the overhead of a remote method
    call when it might not otherwise be necessary. If it were possible to
    place a copy of the same Service Object (with user visibility) in each
    partition, the overhead of a remote method call could be avoided. This
    would only be useful for a service object whose state could be safely
    replicated.
    2) My second scenario also involves mobile objects referencing a Service
    Object, but this time I would like the behavior of the called Service
    Object to differ with the partition from which it is called.
    This could be accomplished by placing Service Objects with the same name
    and the same interface in each partition, but varying the implementation
    with the partition.
    Does anyone have any thoughts about why this would be a good thing or a
    bad thing?
    David N. Foote
    Consultant
    Get Your Private, Free Email at <a href=
    "http://www.hotmail.com">http://www.hotmail.com</a>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:<a href=
    "http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:<a href=
    "http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

    David,
    First I will start by saying that this can be done by using named anchored
    objects and registering them yourself in the name service. There is
    documentation on how to do this. And by default you will get most of the
    behavior you desire. When you do a lookup in the name service (BindObject
    method) it will first look in the local partition and see if there is a
    local copy and give you that copy. By anchoring the object and manually
    registering it in the name service you are programmatically creating your
    own SO without defining it as such in the development environment. BTW in
    response to your item number 1. This should be the case there as well. If
    your "mobile" object is in the same partition where the service object he is
    calling resides, you should get a handle to the local instance of the
    service object.
    Here is the catch, if you make a bind object call and there is no local copy
    you will get a handle to a remote copy but you can not be sure which one!
    It end ups as more or less a random selection. Off the top of my head and
    without going to the doc, I am pretty sure that when you register an
    anchored object you can not limit it's visibility to "User".
    Sean
    -----Original Message-----
    From: [email protected]
    [<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
    Sent: Monday, June 22, 1998 4:51 PM
    To: [email protected]
    Subject: multiple named objects with the same name and interface
    All,
    More than once, I have wished that Forte allowed you to place named
    objects with the same name in more than one partition. There are two
    situations in which this seems desirable:
    1) Objects that are not distributed, but are mobile (passed by value to
    remote objects), cannot safely reference a Service Object unless it has
    environment visibility, but this forces the overhead of a remote method
    call when it might not otherwise be necessary. If it were possible to
    place a copy of the same Service Object (with user visibility) in each
    partition, the overhead of a remote method call could be avoided. This
    would only be useful for a service object whose state could be safely
    replicated.
    2) My second scenario also involves mobile objects referencing a Service
    Object, but this time I would like the behavior of the called Service
    Object to differ with the partition from which it is called.
    This could be accomplished by placing Service Objects with the same name
    and the same interface in each partition, but varying the implementation
    with the partition.
    Does anyone have any thoughts about why this would be a good thing or a
    bad thing?
    David N. Foote
    Consultant
    Get Your Private, Free Email at <a href=
    "http://www.hotmail.com">http://www.hotmail.com</a>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:<a href=
    "http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:<a href=
    "http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

  • Multiple ResourceBundle definitions with the same name

    I created a new web application project with JSF support using Netbeans 5.5Beta. The new project has a simple welcomeJSF page that I did not modify. The only modifications I did is adding a CustomMessages.properties file under com.mywebsite.resourcs and adding the following entry to faces-config.xml:
    <application>
            <resource-bundle>
                <base-name>com.mywebsite.resources.CustomMessages</base-name>
                <var>BundleOne</var>
            </resource-bundle>
            <locale-config>
                <default-locale>en</default-locale>
            </locale-config>
        </application>Now when I right click welcomeJSF and select Run File, the follow error is added to the log file of SJSAS PE9:
    Message ID:
    WebModule[/WebApplication1]Exception sending context initialized event to listener instance of class com.sun.faces.config.GlassFishConfigureListener javax.faces.FacesException
    Complete Message
    Can't parse configuration file: jndi:/server/WebApplication1/WEB-INF/faces-config.xml: Error at line 14 column 27: Error at (14, 27: Multiple ResourceBundle definitions with the same name: BundleOne.
         at com.sun.faces.config.ConfigureListener.parse(ConfigureListener.java:1751)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:524)
         at com.sun.faces.config.GlassFishConfigureListener.contextInitialized(GlassFishConfigureListener.java:47)
         at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4236)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4760)
         at com.sun.enterprise.web.WebModule.start(WebModule.java:292)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:833)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:817)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:659)
         at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1468)
         at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1133)
         at com.sun.enterprise.server.WebModuleDeployEventListener.moduleDeployed(WebModuleDeployEventListener.java:171)
         at com.sun.enterprise.server.WebModuleDeployEventListener.moduleDeployed(WebModuleDeployEventListener.java:275)
         at com.sun.enterprise.admin.event.AdminEventMulticaster.invokeModuleDeployEventListener(AdminEventMulticaster.java:954)
         at com.sun.enterprise.admin.event.AdminEventMulticaster.handleModuleDeployEvent(AdminEventMulticaster.java:941)
         at com.sun.enterprise.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:448)
         at com.sun.enterprise.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:160)
         at com.sun.enterprise.admin.server.core.DeploymentNotificationHelper.multicastEvent(DeploymentNotificationHelper.java:296)
         at com.sun.enterprise.deployment.phasing.DeploymentServiceUtils.multicastEvent(DeploymentServiceUtils.java:203)
         at com.sun.enterprise.deployment.phasing.ServerDeploymentTarget.sendStartEvent(ServerDeploymentTarget.java:285)
         at com.sun.enterprise.deployment.phasing.ApplicationStartPhase.runPhase(ApplicationStartPhase.java:119)
         at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:95)
         at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:871)
         at com.sun.enterprise.deployment.phasing.PEDeploymentService.start(PEDeploymentService.java:541)
         at com.sun.enterprise.deployment.phasing.PEDeploymentService.start(PEDeploymentService.java:585)
         at com.sun.enterprise.admin.mbeans.ApplicationsConfigMBean.start(ApplicationsConfigMBean.java:719)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sun.enterprise.admin.MBeanHelper.invokeOperationInBean(MBeanHelper.java:353)
         at com.sun.enterprise.admin.MBeanHelper.invokeOperationInBean(MBeanHelper.java:336)
         at com.sun.enterprise.admin.config.BaseConfigMBean.invoke(BaseConfigMBean.java:448)
         at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
         at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
         at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
         at sun.reflect.GeneratedMethodAccessor23.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sun.enterprise.admin.util.proxy.ProxyClass.invoke(ProxyClass.java:77)
         at $Proxy1.invoke(Unknown Source)
         at com.sun.enterprise.admin.server.core.jmx.SunoneInterceptor.invoke(SunoneInterceptor.java:297)
         at com.sun.enterprise.admin.jmx.remote.server.callers.InvokeCaller.call(InvokeCaller.java:56)
         at com.sun.enterprise.admin.jmx.remote.server.MBeanServerRequestHandler.handle(MBeanServerRequestHandler.java:142)
         at com.sun.enterprise.admin.jmx.remote.server.servlet.RemoteJmxConnectorServlet.processRequest(RemoteJmxConnectorServlet.java:109)
         at com.sun.enterprise.admin.jmx.remote.server.servlet.RemoteJmxConnectorServlet.doPost(RemoteJmxConnectorServlet.java:180)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
         at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
         at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
         at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
         at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)

    Go ahead and doubt if it makes you feel superior.
    For others:
    If your pom has this:
    <dependency>
                   <groupId>javax.faces</groupId>
                   <artifactId>jsf-api</artifactId>
                   <version>${jsf.version}</version>
              </dependency>
              <dependency>
                   <groupId>javax.faces</groupId>
                   <artifactId>jsf-impl</artifactId>
                   <version>${jsf.version}</version>
              </dependency>
    where jsf.version = 1.2, change jsf.version to 1.2_10

  • Multiple authentication sources with the same category

    Quote from portal help:
    "Multiple authentication sources can use the same category. However, because the prefix is prepended to the user and group names, you need to be certain that the domains involved do not have different users or groups with the same name. That is, if a LizaR user exists on one domain, and a LizaR user exists on another domain, they must be the same user because only one user will be created."
    Fine, let's say I am "certain that the domains involved do not have different users or groups with the same name".
    But there is other concern I have here. I want to know how portal will RECOGNIZE which authentication source to use?
    Let's say I have 2 auth sources AS1 and AS2 with the same category MyAuth. AS1 use WS1 to authenticate against LDAP1 and AS2 use WS2 to authenticate against LDAP2.
    Now, I have a user - Dmitry. I am trying to login into portal and I selected AS1 to do actual authentication. My question is how portal will CHOOSE which auth source to use because all portal knows about me is <MyAuth\Dmitry> that is came from portal login screen? Both auth sources match this pattern so seems like portal may choose any of them.
    Does it mean that portal will try to authenticate again AS1 and if this attempt failed then you AS2?
    I didn't find any explanation in portal documentation.
    Thank you.
    Edited by Bryazgin at 12/12/2007 10:42 AM

    Yes, it seems you are right. As soon as portal have found CORRECT user there is no issue anymore because user is bind to unique auth source that actually has been used to created this user.
    I think my main confusion come from the fact that having <Category> and <UserName> is not enough to UNIQUE identify user in portal as soon as <Category> can be the SAME for different auth sources.
    Let's have you have user created by AS1. According API this user created by this AS1 will have 4 different names, like sUniqueName, sAuthenticationName, sLoginName and sDisplayName. But portal is going to search user in portal database BASED on information that is available in login form - <Category> and <User Name>. At this point portal has no idea about sUniqueName and all this things.
    Now if there were 2 users in database that have been created by 2 different auth sources with the same <category> and <User Name> then I don't understand how portal will figured out which user to choose from. I guess <Category> value somehow MUST participate in sUniqueName value. <Category> has to be involve in process of finding user in database. In this scenario 2 users will be retrieved from database and what is important these 2 users are different, they have been created by different auth sources. Now question became which user is CORRECT one?
    Edited by Bryazgin at 12/12/2007 1:34 PM

  • Multiple users found with the same name

    Hi,
    In my ADF bean, I am trying to access some users from ldap. I found there are two users with the same email in my console under "Users and Groups" tab.
    I am getting the following error in logs:
    oracle.jbo.JboException: multiple users found with same name
            at com.castandcrew.portal.am.StartPaperworkCenterAMImpl.setStartPaperworkApprovalHistory(StartPaperworkCenterAMImpl.java:627)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at oracle.adf.model.binding.DCInvokeMethod.invokeMethod(DCInvokeMethod.java:657)
            at oracle.adf.model.binding.DCDataControl.invokeMethod(DCDataControl.java:2143)
            at oracle.adf.model.bc4j.DCJboDataControl.invokeMethod(DCJboDataControl.java:3114)
            at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:261)
       at oracle.adf.model.bc4j.DCJboDataControl.invokeMethod(DCJboDataControl.java:3114)
            at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:261)
            at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1635)
            at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2151)
            at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:740)
            at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:402)
            at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)
            at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)
            at com.castandcrew.portal.view.bean.startpaperwork.StartPaperworkCenterManagedBean.handleRowDisclosure(StartPaperworkCenterManagedBean.java:696)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at com.sun.el.parser.AstValue.invoke(AstValue.java:187)
            at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)
            at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1300)
            at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:263)
            at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:147)
            at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:404)
            at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:148)
            at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:280)
            at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:147)
            at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:404)
            at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
            at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:93)
            at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
            at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
            at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
            at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:93)
            at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
            at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
            at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
            at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1018)
            at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:431)
            at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
            at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
            at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:34)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    I am wondering how open ldap can allow two users with same email.
    Any suggestions are welcome.can i try some work around for that?
    Thanks.

    Hi.
    For some reason you have duplicates. Normally is something strange but it can occurs in heavy load / database corruptions or other situations.
    You should contact a LDAP Administrator in order to find and fix the duplicate problem.
    Regards.

  • Running multiple batch actions on the same folder? One Click?

    We run Actions on a group of images using CS4 with the File->Automate->Batch function. We use this to take, for example, 200 images from a set folder and run an "Action" to create a rendered 2D design and save it in a different location to the source image and add an extension to the file name, leaving the source image unaltered. 
    The problem is that we then require to run this 20 times, each time, the difference is :- we want it to save to a different location and the "action" used is different because it changes the colour for example.
    The desired output is:
    FROM A JPEG ---> 20 folders (named as 20 different colours) and all our images rendered (as in our action) and saved into the 20 folders
    So we have 20 versions of each image
    Currently we simply set off the different actions in a batch separately, IE. 20 lots of batches to set off.
    So for example:
    * We have 200 jpeg images in folder [A]
    * We run a Batch function to run an "action" on all 200 images in folder [A] to render into our design and add a blue colour overlay (this is all done in the action itself) and to save them to folder [B] with the extension (BLUE) added to the filename.
    * Once Photoshop finishes running this Action on the 200 images (wish it would beep or something to let you know it was finished) we then run a batch to run a different "action" on the same 200 images in folder [A] to render the design and add a pink overlay and to save them in folder [C] with the extension (PINK) added to the filename
    And so on and so forth for the 20 different actions.
    Is there a way we can instruct Photoshop to run all of these 20 actions (one after the other in a queue as it where) without having to "Babysit" Photoshop and ask it to run each one off ourselves manually?
    Would we have to use JavaScript for this? We have no experience with JavaScript at all.
    We are currently using Photoshop CS4, is there a easier way to do this on CS5 or CS6?
    Kind Regards and Thanks in advance
    Steven

    Would we have to use JavaScript for this?
    I think it would be advisable but (if you don’t mind risking getting less help) you could use VB or AppleScript depending on your platform.

  • Question on multiple form elements with the same name !

    Hi All,
    I have a requirement in which more than one text field with the same name exists on a HTML page. We are using JSF framework (Oracle JDeveloper IDE and OC4J ) . I tried using a String array in my backing bean to handle these text boxes. When I hit the Submit, the action (method) is not invoked. But when I try with unique names everything works fine. Am I going wrong somewhere ?
    Thanks in Advance.

    You cannot have exactly the same name on objects.
    You will have to make an array of them to be able to
    o work with them properly--it will keep the names
    unique.I understand! But JSF creates its own names which are unique. The following JSF code
            <htm:tr>
                <htm:td>
                    <h:inputText value="#{Test.description}" id="description1"/>
                </htm:td>
            </htm:tr>
            <htm:tr>
                <htm:td>
                    <h:inputText value="#{Test.description}"  id="description2"/>
                </htm:td>
        </htm:tr>generates the following HTML code with unique names.
            <tr>
                <td>
                    <input id="Test:description1" type="text" name="Test:description1" />
                </td>
            </tr>
            <tr>
                <td>
                    <input id="Test:description2" type="text" name="Test:description2" />
                </td>
        </tr>
        <tr>Though I have a String Array in the backing bean, this doesn't work (The form does not submit to the method in the Backing Bean).
    Similar situation in Struts works absolutely fine.
    Any help would be appreciated !!!

  • Multiple ios products with the same name.

    Hello guys,
    We have multiple iOS universal products with the same name for different countries. Will it cause any issues when the user installs them in the same device? Using Xcode to push them to my device, i noticed that they are all installed in the same place, i.e only one app is available. So my question is how should we do to use the same name for multiple apps and is it possible?

    Go ahead and doubt if it makes you feel superior.
    For others:
    If your pom has this:
    <dependency>
                   <groupId>javax.faces</groupId>
                   <artifactId>jsf-api</artifactId>
                   <version>${jsf.version}</version>
              </dependency>
              <dependency>
                   <groupId>javax.faces</groupId>
                   <artifactId>jsf-impl</artifactId>
                   <version>${jsf.version}</version>
              </dependency>
    where jsf.version = 1.2, change jsf.version to 1.2_10

  • TS1398 My iPhone is not showing that its connected to wi-fi at home. My laptop is connected, but the phone is only showing 3G. I've turned the phone off and on multiple times, turned wi-fi on & off multiple times, all with the same result of no wi-fi.

    My iPhone is not showing that it is connected to wi-fi. My laptop is showing the wi-fi signal with a completely strong signal.  I have turned the phone off & on multiple times, and have turned the wi-fi (on the phone) off & on multiple times as well, all with the same result. Help!!! Any suggestions?

    Poof! It's working like normal! Thanks Lawrence! Guess I have to learn patience!

  • HT3051 can you change your Change Your Displayed Name if you have multiple devices attached with the same apple id?

    We have both a Iphone 4s and a 4th Generation Ipod Touch both with the latest available IOS software on them. Since the Ipod touch was given to a preteen for Christmas and they aren't old enough to have their own email account or apple id 11 years old going on 12, is it possible to have a different displayed name for each device if they are both signed in with the same apple ID and not interfere with each others device in doing so?

    @pdroth. Displayed name as in when you sign up for a apple id you sign up with email and a screen name(this is your display name). If you are using any apple device as like you do with an android device you have to sign in with either your google acct for android or apple id for a apple product. If one apple product is utilizing that apple id already aka Iphone and you can't set up a account for your child because of his or her age because of age restrictions, both devices will use the same info. So for instance when using things like facetime instead of seeing jane doe calling jane doe(basically making it show name of other person using your account instead of seeing your own name) can you make on jane doe and one john doe using the same apple id just different outgoing display name. Hopefully this helps.

  • Unreliable - Deleting multiple files/folders with the same name?

    I have recently found when trying to delete folders with the same name it is unreliable, is there a better way, ie termin that would work for the following...
    I have 1000's folders with sub-folders to delete...
    Please see screenshot each folder is identical apart from 'copy #' at the end of the folder
    1. using search in top level folder toobar for "instructions"
    2. 647 results are retuned
    3. Select all and [cmd] [del]
    4. Repeat step 1 but some folders are still are found.
    Any ideas ?

    Go ahead and doubt if it makes you feel superior.
    For others:
    If your pom has this:
    <dependency>
                   <groupId>javax.faces</groupId>
                   <artifactId>jsf-api</artifactId>
                   <version>${jsf.version}</version>
              </dependency>
              <dependency>
                   <groupId>javax.faces</groupId>
                   <artifactId>jsf-impl</artifactId>
                   <version>${jsf.version}</version>
              </dependency>
    where jsf.version = 1.2, change jsf.version to 1.2_10

Maybe you are looking for

  • Can not log on after successfull installation - SAP Netweaver Trial JAVA

    Hello, I have successfully downloaded and installed the NW Java trial. (NW_JAVA_700SP14_SR3.rar) I can see in SAP MMC that all the services was started. At http://vjm:50000 I can see the default page. Unfortunately I can not log on to any page that n

  • K7N2 Delta2 Platinum - How big a hard drive will it take?

    K7N2 Delta2 Platinum - MS-6570E I would like to fit a new hard drive my current one is 120GB but its getting full I also have a 40GB second drive too. Can anyone tell me whats the biggest drive the board will take and are there any makes of drives th

  • Problem with Polling interval at sender side in JDBC adapter

    Hello, I have some problem in investigating one serious issue using this polling interval, I am using the sender JDBC adapter where i used polling interval as 60(in secs) and 1(in Msecs). So it comes upto 60.001 secs of polling interval. There are ne

  • Why don't my three security questions  work?

    I am trying to download from the store and asked to complete the three security questions. I did so, but one answer is rejected. The question is what  was the name of you first pet...my answer ( e.g Rover), the rejection response ... your date of bir

  • PS cc ImageSize preview size???

    Hi- In the new Image>Image Size dialog box, the preview is always at 100% which seems a bit disorienting. Is there a way to set that to default to "fit" Thanks Tom