Ebook running slowly and crashing
I am trying to read an eBook recently dowloaded from Elsevier called Retina and it is running very slowy and is causing the program to not respond which can lead to a crash.
I have tried using it on ADE 2.0 and 3.0 as well as on two different computers both of which have the recommended specifications.
Could this be a problem with ADE or is it likely to be caused by the book itself? I have called Elsevier and they have told me that they cannot provide a refund before I get conformation that it is not a problem with the adobe software.
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
Similar Messages
-
Hello,
I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
Thanks ever so much for your advice!
Lillibet
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 9:53 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2012) (Technical Specifications)
MacBook Air - model: MacBookAir5,2
1 1.8 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 0:22:41
Disk Information: ℹ️
APPLE SSD SM256E disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple Inc. Apple Keyboard
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/WD +TURBO Installer.app
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.USB-64HP (1.0.3) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.14) [Click for support]
/System/Library/Extensions
[not loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
[loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
Problem System Launch Daemons: ℹ️
[failed] com.apple.mtrecorder.plist
Launch Agents: ℹ️
[running] com.mcafee.menulet.plist [Click for support]
[running] com.mcafee.reporter.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[failed] com.apple.spirecorder.plist
[running] com.mcafee.ssm.Eupdate.plist [Click for support]
[running] com.mcafee.ssm.ScanManager.plist [Click for support]
[running] com.mcafee.virusscan.fmpd.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
TouchP-150M Application (/Applications/Canon P-150M/TouchP-150M.app)
iPhoto Application (/Applications/iPhoto.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
JavaAppletPlugin: Version: Java 8 Update 45 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
FUSE for OS X (OSXFUSE) [Click for support]
Java [Click for support]
MacFUSE [Click for support]
NTFS-3G [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
Destinations:
My Passport Edge for Mac [Local]
Total size: 499.94 GB
Total number of backups: 27
Oldest backup: 2013-01-31 21:15:26 +0000
Last backup: 2015-05-02 11:33:09 +0000
Size of backup disk: Adequate
Backup size 499.94 GB > (Disk used 82.42 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
3% fontd
2% VShieldScanManager
0% taskgated
0% notifyd
Top Processes by Memory: ℹ️
745 MB Google Chrome Helper(8)
439 MB kernel_task
246 MB VShieldScanner(3)
160 MB Google Chrome
127 MB Finder
Virtual Memory Information: ℹ️
130 MB Free RAM
3.87 GB Used RAM
0 B Swap Used
Diagnostics Information: ℹ️
May 2, 2015, 09:30:08 PM Self test - passed
May 2, 2015, 08:52:59 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
May 2, 2015, 09:28:53 AM /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
May 1, 2015, 05:45:24 PM /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
May 1, 2015, 05:38:54 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
May 1, 2015, 05:38:43 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
May 1, 2015, 05:38:32 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
May 1, 2015, 05:38:27 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
May 1, 2015, 05:38:10 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
May 1, 2015, 05:38:00 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
May 1, 2015, 05:37:49 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
May 1, 2015, 05:37:38 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
May 1, 2015, 05:37:27 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
May 1, 2015, 05:37:22 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
May 1, 2015, 05:37:06 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
May 1, 2015, 05:36:55 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
May 1, 2015, 05:36:44 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
May 1, 2015, 05:36:33 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
May 1, 2015, 05:36:22 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
May 1, 2015, 05:36:17 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
May 1, 2015, 05:36:01 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
May 1, 2015, 05:35:50 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
May 1, 2015, 05:35:39 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
May 1, 2015, 05:35:28 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
May 1, 2015, 05:20:29 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
May 1, 2015, 04:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
May 1, 2015, 02:53:58 PM /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
Apr 20, 2015, 09:31:20 PM /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
Macbook Pro running slowly and crashing with sleep
Title says it all, really. Whenever I open my Macbook Pro, after closing it to sleep, I have to hard-reset my computer by holding down the power button. Occasionally this problem springs up if I manually have my computer sleep, but typically only when I close it. Additionally, recently it's started running quite slowly as well. I've tried verifying/repairing permissions on the boot disk, but "Repair volume" just does the same thing over and over when I try it. I have 4GB DDR3 RAM, a 2.7GHz DualCore Intel i7 processor, and the Intel HD3000 Graphics Card chipset. 500GB internal hard drive (not a Solid State Drive to my knowledge), of which a little more than half is used. I'm pretty sure my laptop is the 2011 model. I'm running OS 10.7.2, or whatever the latest official release happens to be. Any help would be appreciated, seeing as I close my laptop between classes during the day, and having to reboot it every class is incredibly obnoxious.
I can't provide screenshots at the moment. I live near UNH so I sent it in to them for a supposed hardware fix - I got an email today saying what they tried didn't do anything. I read somewhere about deleting a certain extension relating to power management of the CPU (AppleIntel______.kext), but I didn't get to try it before I sent my computer in, and I can't find that article again. The only thing I had recently installed was Poker Night at the Inventory (a game from Steam), but I installed that on a separate laptop with no issues (my dad's 15" MBP). The fresh Lion install did put me up to 1.7.3. My activity monitor shows like this, normally, only "kernel_task" is taking up 300% CPU and my entire little CPU-meter at the bottom is filled with red. This is a screenshot from my dad's Mac, right now, which is identical to mine except it's a 15" instead of a 13".
-
After upgrading to OS X Lion Aperture 3.1.3 runs very slowly and crashes
After upgrading to OS X Lion Aperture 3.1.3 runs very slowly and crashes regularly when editing and/or exporting images. Prior to the upgrade these problems did not exist - has anyone else encountered this behavior and found a resolution?
My iMac has 2GB of RAM (max RAM is 3GB according to the machine specs) and uses a 2TB external drive for the Aperture library and Time machine backups.Thanks for the suggestions. Unfortunately after doing the Repair Permissions and rebuilding the Aperture Library the performance has not improved.
I cleared out the cache(s) by removing all of the files in the following folders and restarting:
Hard Drive/Library/Caches
Hard Drive/System/Library/Caches
Hard Drive/Users/(Your user)/Library/Caches
which seems to have helped a little bit. I did notice that in my Users folder there are 111 items:
username
username 1 (then folders with the same name up to 109)
Shared
could the extra username folders be causing the performance issue? In each folder is a Library folder, in the Library folder is a Preferences folder and in the Preferences folder is a com.apple.internetconfigpriv.plist file and sometimes a com.apple.LaunchServices.plist file.
Only the username 1's Library folder has the standard Caches, Fonts, Logs & Preferences folders.
Is it safe to remove the username 2 - 109 folders? If so is the creation of these folders something I can turn off? -
Macbook Pro 2009 runs slowly and freezes. Can someone look at this Etrecheck report and tell me what's wrong?
Hardware Information:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 6 days 16:17:8
Disk Information:
FUJITSU MJA2160BH FFS G1 disk0 : (160.04 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
MacBook HD (disk0s2) /: 159.18 GB (29.38 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.spsys.driver.IOKitDriver (1.0.0d1)
com.parallels.kext.usbconnect (8.0 18615.948847)
com.parallels.kext.hypervisor (8.0 18615.948847)
com.parallels.kext.hidhook (8.0 18615.948847)
com.parallels.kext.netbridge (8.0 18615.948847)
com.parallels.kext.vnic (8.0 18615.948847)
com.parallels.filesystems.prlufs (2010.12.28)
Startup Items:
StartupComponent: Path: /Library/StartupItems/StartupComponent
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.fitbit.galileod.plist 3rd-Party support link
[System] com.spsecure.daemon.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.spsecure.useragent.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] [email protected]
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
iTunesHelper
AdobeResourceSynchronizer
Dropbox
EvernoteHelper
Fitbit Connect Menubar Helper
Google Chrome
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
Move-Media-Player: Version: npmnqmp 071503000004 3rd-Party support link
fbplugin_1_0_3: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
MacFUSE 3rd-Party support link
Bad Fonts:
None
Old Applications:
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Amazon MP3 Downloader: Version: INFO_PLIST_VERSION - SDK 10.4 3rd-Party support link
Time Machine:
Skip System Files: NO
Auto backup: YES
Time Machine not configured!
Top Processes by CPU:
37% prl_vm_app
10% WindowServer
9% Google Chrome
1% hidd
1% Agent
Top Processes by Memory:
602 MB prl_vm_app
115 MB Google Chrome
82 MB Google Chrome Helper
82 MB Mail
70 MB Microsoft Word
Virtual Memory Information:
137 MB Free RAM
782 MB Active RAM
718 MB Inactive RAM
1.50 GB Wired RAM
23.02 GB Page-ins
1.21 GB Page-outsHey greytdogs,
I would give some of the suggestions in this link a shot:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
My MAC is running slowly and I am having to continually remove unwanted pop ups and leave unwanted pages which appear including MACkeeper. If I am on a sports website, betting pages appear - any ideas?
Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(120718) -
My computer is running slowly and slowly
my computer is running slowly and slowly and the sound of fan becomes louder and louder .I suspect my computer get infected by virus
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple |Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/ { n++;print;} END { if(n<185) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<185) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2[01].+/,"",$3);b=b"\n"$2" "$3" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My Mac is running slowly and having some glitches in opening programs. How can I clean upspace?
My Mac is running slowly and having some gliches when opening programs. How can I clean up the disk to make it more efficient?
learn how to use Recovery Mode
Don't do anything until you can restore and have repaired the disk drive.
Post should get moved to either ML (10.8,.4) or iMac forum
Swap out the hdd for an SSD : )
Don't do anything to clean it up unless you don't know how to first remove browser history from within the programs; low on disk space (I consider more than even the 15% minimum, more like 3--40%)
And do you have page outs? more than enough RAM? what actually leads you to ask? Programs aren't opening properly?
Sometimes it is easier to take the long road: just reinstall and restore.
Recovery Mode
http://support.apple.com/kb/HT4718
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
General purpose Mac troubleshooting guide:
Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form -
After installing IOS5 my iPad runs slower and crashes often when I have safari or any application opened. Is apple working on fixing this issue? is it happening to most of you or just me?
I appreciate any information you can provide. Using this device is getting annoying !I'm using mine right now to answer you and I've not had the issues you are having. Have you tried a Restore from Backup?
-
My iPad is running slowly and freezing up
MMy ipad is running slowly and freezing up. I upgraded to os 8 and rebooted but it still freezes etc. how do I fix this?
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7-8 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7-8 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Cheers, Tom -
Error -Your Computer Is Running Slowly and Affecting Audio Quality
Getting this error very frequent on Users Computer - I have made sure the Physical Memory and CPU usage is below 10 still we have the error for users .
Lync 2010 Client -Is there some logging that i can enable on Client side which will give me more insight as to what is the cause of error .
Have Already Checked below links these are very generic and basic but of no help !!!
http://social.technet.microsoft.com/wiki/contents/articles/7168.lync-troubleshooting-your-computer-is-running-slowly-and-affecting-audio-quality.aspx
http://office.microsoft.com/en-us/communicator-help/your-computer-is-causing-poor-audio-quality-HA102221829.asp
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Anand ShankarHi Anand,
Does the issue happen only with external users or all of the users? Do you use VPN? Please provide us more environment configuration information.
Please make sure your computer’s device drivers are up-to-date.
You can try a different audio device to test the issue.
For a list of devices optimized for Lync:
http://technet.microsoft.com/en-us/lync/gg278164.aspx
Here is another similar case for your reference:
http://www.techysnippets.com/your-computer-is-running-slowly-and-is-affecting-audio-quality-lync-2010/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
If the issue persists, you can enable logging tool on Lync client to simple troubleshooting the issue with the help of the link below:
http://technet.microsoft.com/en-us/library/gg195661(v=ocs.14).aspx
What’ more, you can use the following methods for further troubleshooting:
Check the monitoring report:
http://blog.insidelync.com/2012/06/a-primer-on-lync-audio-quality-metrics/
Troubleshooting Lync Call Quality Locally with Snooper
http://blogs.technet.com/b/nexthop/archive/2012/12/10/troubleshooting-call-quality-locally-with-snooper.aspx
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Adobe Flash Player 10.1.82.76. Signature : hang | mozilla::plugins::PPluginInstanceParent::CallNPP_Destroy(short*). Plug In regularly crashes AND I get Error message "Script in this movie causing Adobe Flash Player to run slowly. If it continues to run, your computer may become unresponsive.Do you want to abort the script?" Attempts to download plug in update get Adobe Download Manager but no resolution to problem. Should I disable hang protection? Uninstall DLM?
When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
Firefox 3.6.3 runs slowly and hangs
Recently I started having an issue with Firefox running slowly. I upgraded to version 3.6.3 hoping this would fix the problem but it did not. I tried this suggestion from CNet - http://forums.cnet.com/5208-6136_102-0.html?threadID=242416, which seemed to help at first, but then I started having the problem again so I un-did everything suggested in the CNet link. Now in addition to Firefox running slowly (pages load slowly and it is also very slow to scroll up and down), I am having problems with it hanging when I try to move windows. For example, I play games on Pogo.com which open in a new window. When the window opens, if I click at the top of the window and try and move it to a different location on the screen, Firefox completely hangs. At first I thought maybe something was wrong with my Java, but Firefox also does this if I open Tools->Options and try to move that window. I read the "Firefox Hangs" article and the suggestions either didn't apply, or didn't work. I've disabled all my plugins and add-ons and that doesn't fix the problem. I know there is nothing wrong with my internet connection or my computer because everything works fine in Internet Explorer. Any help would be greatly appreciated as I really don't want to have to go back to IE.
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)My Firefox hangs I am using windows 7 and the CPU meter runs rightup into the red when I open a page and it also hangs I also get other programmes not responding (mainly Adobe stuff) not sure if this is because these programmes connect to the web when you open them . if I cant fix this I may try I E 8 but have not used internet explorer for years so dont really want to change
-
Leopard Suddenly Running Slowly and Need Help
Hi there. I have been a Mac user (and Mac support person at work) for many years. I've recently run into a problem that I'd like some help with.
I have an iMac that I bought 4 months ago, and I upgraded to Leopard and then put 10.5.1 update onto it.
Nothing of any note has occurred with my computer in the last 2 days, however, 2 days ago, every application started running very slowly. I click on the HD icon, and the spinning color cursor spins for 30-40 seconds before the HD opens. I click in the bottom tray to open Safari, and it takes 40-50 seconds for it to open (as the color cursor spins away). I reboot, and the iMac comes up with the front white/gray screen and holds with the spinning circle for anywhere from 20 to 45 MINUTES before going to the desktop. I have reinstalled Leopard (telling it to Archive and Install). Same problems abound. I ran Tech Tool, and it says everything is fine. I started up from the Leopard install DVD and ran Disk Utility. Checking the progress log, it tells me that the HD cannot be unmounted (meantime, I've booted from the DVD and nothing else is attached or running). When I select "Repair Disk" in Disk Utility, I get an immediate message that the HD cannot be unmounted.
What does this sound like? A hard drive failure? Will completely erasing my HD and installing Leopard from scratch (as opposed to installing Tiger and upgrading to Leopard) help? Or am I merely band-aiding the problem and need to take it in for qualified Apple Tech support?
I'd appreciate any help.
Thanks.Hi and welcome to the Apple forums.
I would run DU and check the disk and the permissions.
If necessary use DiskWarrior
You might also zap the PRAM and NV-RAM.
Check the console log, other logs and of course the activity monitor.
If it is noticeably slower, what is causing it should be rather obvious.
It could be a failing drive that is being re-read multiple times to extract data from a bad block/sector.
Be sure you have everything backed up. !!!
Message was edited by: nerowolfe -
HT1338 My Macbook Pro is running slowly and Safari keeps locking up. What can I do to fix it?
My Macbook Pro has been running slowly for several weeks. Safari keeps locking up and I have to Force Quit. It is very frustrating because it has always worked so well. My software is all up to date and I'm not using anything big - normally just Safari, Word, Excel or Powerpoint. Is there something I can do to clean it up or fix it?
Thanks!It would of had to be a very powerful magnet to damage, actually erase, the hard drive. That is the only thing that would cause it from starting up, a magnet powerful enough to erase part of the data on the drive. Hard drives are also shielded to some degree to prevent this from happening. If this particular mac was running lion or mountain lion try booting to the Recovery HD, hold down the command+r keys at startup. If that doesn't work try command+option+r key and hold those down until you see a globe on the screen. That will boot the system from over the internet from the Apple servers using the online recovery system. That is if the system can use the online recovery system. Only systems newer then late 2011 model can use it. From either type of boot try to repair the drive using disk utility. If that fails then you will need to reinstall OS X on the system.
I doubt the magnet cause any physical damage to the hardware in the system. So once you repair the drive or reinstall the OS the system should start working again.
Maybe you are looking for
-
Hi I have a idoc to ftp requirement. How do i ensure couple of things, 1) If the ftp server is down the payload is resent. 2) The delivery is guaranteed. regards Sameer
-
Open Image Size 50% instead of 33% Photoshop CS2
When I open images in Photoshop CS2 they open at 33%. As I have a 19" screen and edit 100's of images a day I would like to change the "default" to open the images at 50% instead. Occasionally they open at 50% automatically but I don't know what I've
-
How do I save my iTune songs to another hard drive?
I have purchased 418 iTune songs over the years and want to save them to another hard drive in case my computer crashes. I have tried to do that with my HP Simple Save external hard drive and the songs show up as gibberish. I see lots of blogs on the
-
Convert scanned PDF to PDF containing text?
Before my last laptop crashed, there was an amazing new (new to me, anyway) feature in Adobe that would attempt to convert a scanned copy of a PDF to a PDF containing text that could be highlighted. I was ecstatic! Whenever I opened a PDF, Adobe woul
-
How to make the changes to be permanent when a session is executed successfully ?
Hi Everyone, I am new to ODI. I am learning how to create interfaces for the data flow between two Oracle databases ! Now I started by developing a simple interface of loading data from EMPLOYEES table of HR schema to another table created by me EMPL