EBP and EP6 - Including Services Other than BBPStart

Hello All-
Hopefully a quick answer to a quick question.  We are trying to integrate SRM 4.0 with EP6.0 (SP14.5).  We are having issues described in <a href="https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=595519&_NLANG=E">OSSNote 595519 - Include EBP in a portal</a>.   The note says you need to set up the respective services, not BPPStart.  All the other detail is already done.  My question is what services and how do we include them (as systems I am sure but exactly how...)?  I have torn my hair out looking for this information but am obviously not using the right search terms.
I would be grateful if anyone could point me to where I can find this info or provide some details that will help me find it via search.  Points generously awarded for any and all useful answers.
Thanks-
Jim Orbin
PS. If anyone has the link to the SRM business packages, I'd appreciate that too - the link in the note is dead - http://www.sdn.sap.com/sdn/developerareas/ contentportfolio.

Hi,
Apply SAP Note 1045019 (Example 3) and provide for analysis the errors (in red) from the collected traces.
Regards,
Dimitar

Similar Messages

  • My hard disk crashed and I cannot find out how to "contact customer service" other than this forum.  The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive.  Please help.

    My hard disk crashed and I cannot find out how to "contact customer service" other than this forum.  The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive.  Please help.

    Hi Anthony ,
    Here is the link to connect with Adobe Chat Support.
    https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
    Hope your query gets resolved .
    Regards
    Sukrit Dhingra

  • A library on my hard drive became corrupted, so I over-wrote it from an external hard drive.  When I access the library now on my hard drive, many of the images are vertical, and cannot be rotated other than one at a time.  Ideas to correct this?

    A library on my hard drive became corrupted, so I over-wrote it from an external hard drive.  When I now access the library on my hard drive, many of the images are vertical, and cannot be rotated other than one at a time.  Ideas to correct this?

    You had already done "Repair" and "Rebuild"?  These usually takes scores of minutes or hours.
    Does the Library on your external drive work from the external drive?  Navigate to it in Finder and double-click the name.
    If it does, delete the problem Library, empty the System Trash, reboot, Verify your system disk using Disk Utility (and might as well repair permissions while you're at it), reboot, test the external drive Library once more to confirm it works properly, then close it and copy the Library to your system drive.  When the copying is done, double-click the Library (now on the system drive) and see what you get.

  • Keychain services API and dealing with Keychains other than the default

    Hello,
    So I've been doing some C work with the Keychain services API. But I can't figure out how to set the Keychain for a function to something other than the default, which is set by passing NULL.
    For example,
    status = SecKeychainAddGenericPassword (
    *NULL, // default keychain*
    10, // length of service name
    "SurfWriter", // service name
    10, // length of account name
    "MyUserAcct", // account name
    passwordLength, // length of password
    password, // pointer to password data
    NULL // the item reference
    This function is defined here:
    http://developer.apple.com/documentation/Security/Reference/keychainservices/Ref erence/reference.html#//apple_ref/c/func/SecKeychainAddGenericPassword
    and the data type for the Keychain is here:
    http://developer.apple.com/documentation/Security/Reference/keychainservices/Ref erence/reference.html#//appleref/doc/cref/SecKeychainRef
    But neither helps me at all for being able to edit a keychain that isn't the default Keychain.
    I appreciate any help, thanks.
    Message was edited by: Smerky

    http://developer.apple.com/documentation/Security/Reference/keychainservices/Ref erence/reference.html#//apple_ref/c/func/SecKeychainOpen

  • What are the differences between a 2nd generation Airport Extreme and a 5th generation other than dual band capability?

    I have a 2nd generation and want to replace it with a 5th generation. Will it be worth it? Other than the dual band capability of the 5th gen, what is the advantage?

    The 2nd Gen AirPort will support wireless speeds up to about 270-300 Mbps. The 5th Gen will go up to 400-450 Mbps.
    But, not sure why you are looking at a 5th Gen AirPort when the Gen 6 runs circles around the Gen 5 in terms of speed capability and antenna performance. The 6th Gen antennas are up at the top of the tower for significantly better transmission capability and there are more of them as well.
    With an "ac" capable computer the 6th Gen will get up to 900-1,000 Mbps. Otherwise, it will come in at 400-450 Mbps with a fairly up to date Mac.
    The 6th Gen would be, and is a "no brainer" for me over the 5th Gen, but you may have your reasons.
    Apple tends to introduce new models in June of most years, so if you are not in a rush, you will likely have an even better offering soon.

  • Free photo services other than Facebook and Flickr with iPhoto integration?

    Currently we use Facebook, though I can't assure anonymity when posting images from my facebook account on a particular bulletin board, due to real name being associated with the image being hosted in Facebook. Flickr, for reasons beyond my control is not viable as a choice because Yahoo now appears to own Flickr, and my Yahoo account I decided for reasons of anonymity to not give my real e-mail address and now I don't have the password for it. Is there an iPhoto uploader software that works with Google images, or some other service that is free for hosting images?

    You might give a look at OVI.com. It was bought by Nokia and integrated into their phones but can still be used like facebook or one of the other photo sharing sites. The site will take photos as well as videos.
    It's equivalent of MMe's galleries are called channels. You can make individual channels private or public. Private channels can be opened to specific individuals.

  • Is there a way to stop a deactivated iPhone from constantly looking for service (other than Airplane Mode)?

    I have an iPhone 4S that has been deactivated for another phone.  It's been acting as an extra iPod Touch for me, but after restarting it this morning, I am no longer connected to the cell towers from my old service.  Now I am getting a constant cycle of 'searching' and 'no service'. I'm certain this is going to murder my battery life, and I was wondering if there was a way to either reconnect to the towers (without needing service), stay put on 'no service', or completely disconnect the carrier from the device (freeing it from its 'no service'/'searching' bondage).
    Clarification: I'm not looking to unlock it when I say disconnect from the carrier, I just want it to stop draining my battery.
    Thank you for the help, guys.

    Pull out the SIM card, but don't throw it away.   You'll need it again if you ever wipe the device and need to reactivate it, even though it doesn't work.

  • Infinite blocking when calling service other than "toupper"

    Hi,
    We are testing (trying) Tuxedo Connector between (from) WLS 6.1 (NT) and (to)
    Tuxedo 6.5 (AIX). Calling the sample service "toupper" works fine. But WLS is
    blocking when calling services that do not return the result in the same buffer
    as input (as toupper does). When calling a Tuxedo service that returns its result
    in a buffer it newly allocates (C library), from the WLS logging we see that it
    was able to get the returned data size, but then it seems to block for the data
    itself. Following are the two last logged WLS messages:
    Jan 4, 2002 5:30:32 PM EST> <Debug> <WTC> <]/read_dom_65_tfmh/130/-1>
    Jan 4, 2002 5:30:32 PM EST> <Debug> <WTC> <]/TuxedoMuxableSocket/dispatch/90/failure=-1>
    Any idea? Thanks, Eric.

    See attachment (log from WLS) and following code snippet.
    tupper(TPSVCINFO *rqst)
    /* next line will work */
    char* outMsg = rqst->data;
    /* next line won't work, would get:
    weblogic.wtc.jatmi.TPException: null
    TPException.getDiagnostic(): 0
    TPException.gettperrno(): 13
    char* outMsg = (char*)tpalloc("X_OCTET", NULL, rqst->len);
    for(int i = 0; i < rqst->len; i++)
    out[i] = toupper(rqst->data);
    /* Return the transformed buffer to the requestor. */
    tpreturn(TPSUCCESS, 0, out, rqst->len, 0);
    "Eric Poulin" <[email protected]> wrote:
    >
    Hi,
    We are testing (trying) Tuxedo Connector between (from) WLS 6.1 (NT)
    and (to)
    Tuxedo 6.5 (AIX). Calling the sample service "toupper" works fine. But
    WLS is
    blocking when calling services that do not return the result in the
    same buffer
    as input (as toupper does). When calling a Tuxedo service that returns
    its result
    in a buffer it newly allocates (C library), from the WLS logging we see
    that it
    was able to get the returned data size, but then it seems to block for
    the data
    itself. Following are the two last logged WLS messages:
    Jan 4, 2002 5:30:32 PM EST> <Debug> <WTC> <]/read_dom_65_tfmh/130/-1>
    Jan 4, 2002 5:30:32 PM EST> <Debug> <WTC> <]/TuxedoMuxableSocket/dispatch/90/failure=-1>
    Any idea? Thanks, Eric.
    [weblogic.log]

  • Message app, any way I can back it up and read messages on other than my iPod Touch (4g)

    Yeaaaaaaaaaaaah.
    So I want to get my messages onto my computer (as in transfer convo's), but not willing to pay anything.
    Because the messages are sent to my Apple ID (my email) is there some sort of way of accessing them ?
    Frankly i think it's quite mean that I can't access my OWN messages on my computer with out having to pay anything, i don't know if this applies to iPod touch but i heard that people can download a program for them to read and transfer messages onto their computer for around $20
    I also backed up my iPod, is there some place I can access them?
    Or is Apple going to be extra and make me screen shoot my conversations to save me money?
    Thanks

    Very very unlikely
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                         
    Reporting a lost or stolen Apple product                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Since the last update, you have open your websites and they used to show a pic or website marker at the beginning of each website so you knew what it was, not its just a blank letter and its says something other than the website being viewed, annoying. So

    Please fix the missing website detail pics in the tab bar.
    == This happened ==
    Every time Firefox opened
    == Last update a few days ago

    mikeporter wrote:
    I'm sorry I'm not aware of any "cumbersome" subpanels - unless of course you don't know what you're doing. There is this wonderful invention called a "subVI" that can be used to organize and simplify your code, or are they too "cumbersome" as well? You should really learn a bit about what you are pontificating over before you start running off at the mouth.
    Mike...
    I didn't want to step on your toes. No need to get personal.
    Subpanels make some additional code necessary that hasn't got to do anything with the actual program. And I AM using subIVs as I wrote in my first post, which is exactly the root of the problem.
    Nevertheless I now solved it in a way that comes close to what I wanted. I don't know if some of you meant your suggestions to be understood that way (at least I didn't ). The subVIs will now "insert" themselves (via invoke node) into a subpanel on the main vi, which they are given a reference of at call. This adds minimal aditional code, especially on the main VI which I want to keep as clean as possible. By clustering the panel reference into the parameters the subVIs are already given (not used in the example I attached below), there isn't even a change on the terminals of the subVIs.
    I got to check now if this works well with event structures within the subVIs or if it can create the same problems like multiple event structures within a single VI.
    So no global variables anymore and no writing values by property node. I don't know if this just wasn't possible in previous Labview versions I had a try at that (I guess it was 8.6 and/or 2009) or I just didn't come up with the idea back then.
    And if the text wasn't that helpful, here are two screens:
    Parent VI:
    SubVI:
    Attachments:
    main.png ‏2 KB
    subvi.png ‏5 KB

  • How do I contact the Credit and Order Review Team other than by phone?

    I ordered a new Galaxy Note 4 today, entered my credit card information, submitted the order and everything appeared to go through fine.  About 20 minutes after I submitted the order and received the email receipt, I received a message stating "We have received your order; however, this transaction cannot be processed because our order review department needs additional information from you.  Please contact the Credit and Order Review Team at 866-338-7390 to complete your order."   
    My situation is a bit unusual in that my old phone finally died so I don't have an existing cell phone to use to call the Credit and Order Review Team by phone.  Is there a way to email them securely through the Verizon email system or some other electronic method of providing them with the information they need to process my order?   Can't this be accomplished WITHOUT being required to use an existing phone?   I suppose my only alternative would be to find a pay phone somewhere.in the city that hasn't been disconnected, vandalized or left broken and call the Review Team to answer their questions.   But honestly, there has to be an easier way to accomplish this simple exchange of information.

    Well, yes.  I did think of that one.  But for some reason there is only 1 "authorized" Verizon store in the Palm Springs, CA area and even though they have 6 to 8 staff walking around with tablets looking busy, it can still take over an hour to get someone to actually help you.  And even then, they seem to be very 'compartmentalized' so one only sells accessories off the wall, while 3 others only help existing customers, etc.  So even once you get someone's attention they are probably not the 1 or 2 staff out of 8 that you really need to speak to.  It would be quicker to scour the city for a working pay phone.  :-)

  • Best way to change row and/or cell colors other than doing it in sql

    So I have some interactive reports and I would like to be able to change the color of the row (and in some cases cell). I have seen threads talking to doing this with the sql statement. But is there a way to do this either when the page is displayed or as a result of some action on the page?

    Take a look at this article, towards the middle it shows in interactive reports how to change colors of rows based upon values: http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/apex/r31/apex31nf/apex31irr.htm
    Thank you,
    Tony Miller
    Webster, TX
    Never Surrender Dreams!
    JMS
    If this question is answered, please mark the thread as closed and assign points where earned..

  • Unable to move events and projects to anywhere other than root directory on external drive

    So I bought myself a nice, big, fat and juicy external RAID box and set about moving all my iMovie projects and events from my puny internal iMac drive.
    I've tried to follow all the advice found on Apple Discussions concerning moving them from within iMovie by dragging to the new drive, but try as I might, I cannot find a way to drag to a sub-folder. iMovie INSISTS on putting my data into folders directly on my root, top level of the external drive. That seems rather ridiculous, considering that all I'm trying to do is recreate the "Movies" folder I had on my internal drive, which is nested within several folders itself.
    Please, someone, tell me there is a way to tell iMovie to move the folders iMovie Drop Box, iMovie Events, iMovie Projects, and iMovie Sharing INSIDE a folder on my root called iMovie. Right now, they're sitting out in the elements on the top level, and my OCD is going bananas...
    Aloha,
    clarkkent61564

    The iMovie Projects folder and the iMovie Events folder need to be at the top level of an external drive for iMovie to see it.
    The iMovie Projects folder can have subfolders within it if you want.

  • AB printing labels including country other than own.

    To do this should be straight forward. Select print country then not own however select country works but as soon as I select not own all countries dissapear. I have checked the 'me' card is correct.
    Does anyone have any ideas.

    Well I've been trying all sorts of things and have discovered some annoying aspects of Address Book. When entering an address, the country field offers no possibility of selecting the country from Apple's predefined list. However, if the country is entered in a different way to that found in this list (e.g. USA instead of United States, or Groot Brittannië instead of United Kingdom...), then the country field is simply ignored or treated as equivalent to "my country" when labels are printed. Apple also insists on strictly following the country template defined in Preferences, so that if entering an address for the UK, where addresses rarely follow a template, then, even if everything else is correct, the country will be treated as "my country" (in other words, it's not printed!). And, no, even though you can edit the address after entry in order to select the country from Apple's predefined list, because the rest of the address does not follow the template, the country still remains unprinted.
    Methinks that Apple's US programmers think that every address follows strict template rules per country. Fine in perhaps 90% of the cases, but the reality is that few people in the UK are aware of address templates. What I don't understand is why it is so difficult to simply compare the country field with the specified "my country" name.
    There are also problems in formatting addresses (and, in particular, names) to satisfy national conventions with regard to title, use of partner names, first names, and so on. It's all a bit too American for international usage, I feel.

  • I mistook Sync for a cloud backup, is there a way to get my history, passwords, and add-ons back (other than manually)?

    Mistaking Sync for a cloud backup, I synched, and then proceeded to re-install a fresh copy of Windows. Now I have no paired device, no key, and no apparent way of retrieving my history, and passwords. Add-ons are really no big deal, as I can easily find them again, but the history, favorites, and passwords are not so easy. Is there any way for me to retrieve this information on my new install?

    Sorry, without the Sync Key / Recovery Key your data isn't retrievable. Each individual user is the only one whoever even sees their "key", and it is the encryption / decryption key for that data.

Maybe you are looking for