EBP/CCM XI Catalog scenario; TCP RFC connection EBP to XI doesn't work

Hello All,
i have configured EBP/CCM <> XI Catalog scenario and when i try to execute the test connection for both TCP RFC connections "INTEGRATION_SERVER_<SID>, PLAIN_HTTP_ADAPTER_<SID>" I receive following "ICM_HTTP_CONNECTION_FAILED".
Does anybody know the problem? How can I solve this issue?
Many thanks in advance!
Regards,
Jochen

Hi Chirag Gohil,
first of all many thanks for quick support (also to all!)
I have added the values as notice at your attached weblog
RZ10 (reboot done):
icm/server_port_0 PROT=HTTP,PORT=8005,TIMEOUT=30,PROCTIMEOUT=600
SXMB_ADM:
RUNTIME HTTP_TIMEOUT 10000
but no positive result. The same situation as before!
One additonal helpfull information:
I tryed to execute the respective TCP RFC connection at IE Browser an it works fine!
Targethost: <hostname>
Path Prefix: /sap/xi/engine?type=entry
ServiceNo.: 8005
Logon:
Language: EN
Client: 010
User: <user>
URL at Browser:
http://<hostname>:8005/sap/xi/engine?type=entry
Login with user works fine
XML wegside appeard with comment: "EMPTY_HTTP_REQUEST_RECEIVED"
I think this shows that generall connection works fine!
But why doesn't work the TCP RFC connection?
Many thanks in advance!
Regards,
Jochen

Similar Messages

Internet connection okay, but safari doesn't work !

Dear All,
Internet connection okay, but safari doesn't work ! Version 6.0.2
Appriciate your support

hi there Michael
sorry for the delay was on leave
when i say download the software from the Apple's website i mean download the software update for mac os x 10.3.9
as once you reinstall panther again it will revise back to the original version of the OS which came along with the computer when you purchased which will cause safari to be incompatible with
so once you do a software update for you operating system it will get it compatible with safari
so to get the update you can download it from the computer you have it burn the update on a CD or DVD and then install it on this computer
you can get the download from
http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
just click on the link above to get to the page then click on the number 117mb on the upper right hand corner
once you have downloaded it burn it to a disc and install it on your computer
hey sorry if i did not make myself clear earlier

SOLMAN: CCMS "SID_RZ20_COLLECT_103617Error when opening an RFC connection "

Hi,
During CCMS configuration i am facing below issue in SOLMAN system
a:) After basic prerequistes check & setup when trying to Add component
to monitoring via rz21.
Selected ABAP in component type to be monitored
Got below error.
SID_RZ20_COLLECT_103617Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error
when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC
connection
Error during remote call of RFC1 function: Error when opening an RFC
connection
b:) we followed note 987166 & Monitored guide
https://websmp102.sap-ag.de/~form/sapnet?
SCENARIO=01100035870000000202&SHORTKEY=01100035870000659947&_OBJECT=011000358700001444802008E
and created user CSMREG but user is getting locked automaticaly within
5 min.
System detail:
SID: 300
SAP_BASIS: 701
SP-Levle: 5
Support package: SAPKB70105
For more detail about error please refer attachment screen.
Please provide a solution
Thanks&Regards,
Vyash

Hi,
There are no error in RFC chckes.
only below warnings are coming.
Connection Test SID_RZ20_COLLECT
Connection Type SAP Connection
On HP multiprocessor machines, the specified time values may be incorrect.
Logon     10 msec
Transfer of 0 KB     2 msec
Transfer of 10 KB     3 msec
Transfer of 20 KB     5 msec
Transfer of 30 KB     6 msec
But whenevr we unlock the CSMREG user in central monitring clinet user gets lock with 5 min with below error
Password logon not possible (too many incorrect attempts)
Followed below solution:
Set password as per SAP note:987166
deleted user CSMREG from central monitoring system and created again via RZ21 as per guide in Service market place.
but still facing the same user lock issue.
Now how we can resoulve this issue.
due to this user lock issue i am not able to create remote monitoring entry for ABAP stack always geting below error.
SID_RZ20_COLLECT_121023Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
Regards,
Vyash

My MacBook isn't connecting to the Internet. When I try to connect, it shows the signal strength in the top right corner as if it was connected, but the Internet doesn't work. When I go to my network preferences, it says the ip is self-assigned.

My MacBook won't connect to the Internet, but it's connected to my router. When I go to network preferences, it says that it has a self assigned ip address, and can't connect to the Internet. How can I fix this? Please help!

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

TS1368 When I try to connect to iTunes, it doesn't work and tells me "We could not complete your iTunes Store request. The network connection was reset."

When I try to connect my newly restored iPhone 4 with iOS 7 on it to iTunes, it doesn't work and tells me "We could not complete your iTunes Store request. The network connection was reset." My network connection is working perfectly fine.

Hello donnafromwakefield,
The article linked below details steps that can help restore your computer's ability to connect to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/en-us/TS1368
Cheers,
Allen

ITS 6.20 connect to another client doesn't work

We have an ITS 6.20 .
Glabal service belong the caracteristics of connection to SAP server (login, pasword, client, systemnamme, systemnumber).
I want to connect to another client but all the others parameter stay the same as in global service definition.
The idea I have is to put the client in the URL as parameter but it doesn't work
example of the URL:
http://[server]/scripts/wgate/ZAXB18W/!?client=300&record=1&templatelanguage=EN&username=zzz&cdealer=80023456&sessionid=493460714&~check=7ED3B4B75260C2ABA6EA4EF77706770F
The connection doesn't hold in count the client parameter. It is connected with the client of global parameter.
Is there anybody who can help me ?.

Hello Eric,
You'll need to remove the ~client value in the global.srvc file (and service file of the service being called). Than the ~client parameter in the URL should work.
Edgar

Ipad2 has wifi connection but the internet doesn't work

I use my ipad2 at home with the wifi. I have nothing changed but now the internet doesn't work. The ipad shows me the wifi connection but i cannot receive email and the safari doesen't work too.

This Apple doc may help:
iOS: Troubleshooting Wi-Fi networks and connections
...Found via this page:
http://www.apple.com/support/ipad/

Adobe Connect Add- in link doesn't work

I've gone to the download page for the Connect add-in, and when I click on the link to download the software, the browser is brought to a corrupted webpage of data. The add-in does not download.
This is the URL I'm going to -
http://helpx.adobe.com/adobe-connect/kb/connect-902-add-in.html
On this page, there is a link to download the Connect Add-in for Mac. When using either Firefox or Safari, when the Mac download link is clicked, nothing is downloaded, and the browser displays a corrupt webpage.
Is there an alternate link to download the Add-in for Mac?
Thanks

Hi,
I was able to download addin build # 959 from the download link provided on the page: http://www.adobe.com/support/connect/downloads-updates.html. using Safari on Mac.
Anyways this is the GoUrl to download the Mac addin, if the above URL still doesn't work for you: http://www.adobe.com/go/adobeconnect_9_addin_mac
Thanks
Sameer Puri

ODBC data sucessfully connects, but NEXT button doesn't work

In short I have a forum which sucessfully gets the first record from the DataConnection. The problem is I seem to only be able to get the first record and cannot navigate to other records.
I have added a NEXT button, set up for JavaScript, Client, on Click with the common xfa.sourceSet.DataConnection.next(); code, however when previewing the form (still within LiveCycle) even though I can sucessfully pull the first record from my table, clicking the 'NEXT' button does nothing at all, not even an error.
Any suggestions on what I am missing?
Other Info:
-I am using a MS Access database (.mdb format) with the Microsoft Access Database driver.
-I tried using both User and System DSN's in windows which I am calling when setting up the Data Connection.
-When configuring my DSN's the tests always succeed (and I can call the first record).
-Setting up the Data Connection in Adobe seems to work and shows all of the possible fields in my table.
-I bind my fields to the form, preview it, and see the first record in my table.
-I can add many types of buttons that work, such as printing, emailing, or changing pages of the form, but anything related to database record navigation is not working.
-I am positive that when I call xfa.sourceSet.DataConnection.next() that the 'DataConnection' name is matching exactly my actual Data connection.(seems to be a common problem for people)
-I've followed about 3 different tutorials exactly and they seem easy to go through, but when they add their Next button it works fine. Mine doesn't.
-I've tried starting from a new, blank project as well but cannot change records.
-I've even tried adding or removing the semicolon at the end of: xfa.sourceSet.DataConnection.next();
What am I missing? Is there something potentially wrong with my data connection even though it seems to work?
Thanks.
-Mike

Today I did some troubleshooting. Instead of using MS Access I set up simple MySQL database with 3 text fields (no auto-incrementing fields). Again I was able to quickly connect my LiveCycle form to the MySQL ODBC data source and display the first record from the table but any buttons with click actions that run and javascript lines beginning with xfa.sourceSet.{Name of my data source in LC here}.* commands do not work at all.
I know my buttons work. I can run some xfa.host.messagebox("blah") commands to test that clicking the buttons triggers the javascript code, it's only the xfa.sourceSet.* lines that aren't working.
Now that I have even changed databases and ODBC drivers, what am I still doing wrong? Once I set up the DataConnection in LiveCycle I am then right clicking on it to select 'Generate fields' or clicking and dragging the fields from my DataConnection to the form. It displays the data, but why can't I work with it.
What am I doing wrong?
I am desperate.

Sapccm4x error in tcp rfc connection

Hi all,
I am configuring QAS system (Non Unicode Netweaver 04s & abap stack only) with Solution Manager. I have installed the sapccm4x agent. The agent installation finishes sucessfully with return code 0. The Agent service is started on QAS system.
But it doesnt work. Agent remains in status Shutdown. Even if we try to bring it online, it gives error in RFC communication.
In RZ21 -> Topology -> Agents for Local System, my system status is SHUTDOWN and all the RFC's created by registration (such as N3STAT.<host>.<instance_number> type TCP/IP) return the error program <host>.n3stat.<instance_number> not registered.
The trace file in CEN says:
ABAP Programm: SAPLSALF (Transaction: )
User: CSMREG (Client: 200)
Destination: SAPCCM4X.AMUTWJEQ01.00 (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 38546511, {15FCDEDC-1AEF-F19A-9170-005056B06C7E})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: sapccm4x)
SERVER> Called function module: SALF_AGENT_STATUS_UPDATE
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT'
Transaction program not registered
DEST =SAPCCM4X.AMUTWJEQ01.00
HOST =%%RFCSERVER%%
PROG =amutwjeq01.sapccm4x.00
GWHOST =amutwjps05.dynonobel.net
GWSERV =sapgw01
As per CCMS agents documentation, this SAPCCM4X.<HOSTNAME>.<SYS No> gets automatically created.
I am not able to figure out the reason on SDN and OSS notes for past 3 days!
Please share your thoughts!
Thanks.
Antarpreet

Hello,
Have you cheked the RFC created in Solman, test the RFC and check the error output.
Also check whether the RFC has activation type as 'Registered server program'.
Check the gateway details for the connection.
If nothing works de register the agent and try registering it again.
Regards,
Yoganand.V

DVI connection to second monitor doesn't work

When I had the connection from my Mac Pro to my two monitors (20" Cinema display and 19" Princeton monitor), I had the black screens for a few seconds for both monitors then return to normal. It happens anytime. I read the forum and changed the VGA cable to connect the 19" Princeton monitor and now both monitors work fine.
Do I have to live with the VGA cable option or anyone know how to utilize the DVI connection capability of Mac Pro please help?
Mac Pro Mac OS X (10.4.8) 2.66 GHz, 20" Cinema Display, 19" Princeton Monitor

Hi Joe,
I tried to locate the right slot (x16) by going to
Expansion Slot Utility and changed from #1 to #2. It
showed my configuration of the PCI card now is x16 or
fully speed.
The problem is still the same with DVI connection to
two monitors. Any other suggestions would be
appreciated.
Mac Pro
Mac OS X (10.4.8) 2.66 GHz, 20" Cinema Display,
19" Princeton Monitor
I'm fresh out of idea's. I assume that your card is a 7300GT, correct? I had an out of the box failure with mine and Apple replaced it. I was lead to believe that there were quite a few failures with the card. Interesting, they didn't even want the old one back.
I'd go the Applecare route next and see what they say. FYI, I have two of these running three monitors (all apple flat panels) all on DVI connectors.
Joe

Whenever I try to open my Wifi Connection at home, it doesn't work! It just stays on 3G, and I want to update my phone, but In order for me to do this, I have to connect through WiFi to ignore additional charges, please help!

Hey! So basically, I've been using my Wifi connection (from home) lately, I had no troubles what-so-ever. I turned on my 3G network this morning, and again, everything's going perfectly fine with my connection. I came home around half 4 from school and decided to turn on my Wifi connection at home, what I've realised is that whenever I try turning on my Wifi network, the little sign that's usually at the top doesn't appear anymore. I tried resetting the network settings and closing and opening my phone, but.. This didn't really make any difference. I'm really worried and I don't know what to do! I have tried reconnecting to my Wifi but nothing happened, my Bluetooth's never really turned on. Please help!!

I'm not sure if I'm understanding but if I am then I'm not sure why you are turning your Wi-Fi off and on. It should automatically connect and use your Wi-Fi when it is available and use your cellular data connection when Wi-Fi is not available. I haven't turned either off ever. However, more to the point of your current problem, the following has some troubleshooting steps that may help: http://support.apple.com/kb/TS1398

JCo Connection using file.properties doesn't work when deployed

Hello Experts,
I'm trying to connect to a SAP backend system using the JCo connection.
I've tyed with the standard connection, crating dinamically the connection and it works fine:
mConnection = JCO.createClient("001", // SAP client
"sap.user", // userid
"********", // password
"IT", // language
"ashost.domain.dom", // application server host name
"06"); // system number
mConnection.connect();
Then I tryed to store the login data in a file 'login.properties' put in the same package of my connection classes.
The code is:
String[] logonStr = new String[5];
Properties properties = new Properties();
try {
InputStream is = getClass().getResourceAsStream("login.properties");
properties.load(is);
} catch (Exception e) {
e.printStackTrace();
logonStr[0] = PropertyManager.getProperty(applicationProperties,"jco.client.client");
logonStr[1] = PropertyManager.getProperty(applicationProperties,"jco.client.user");
logonStr[2] = PropertyManager.getProperty(applicationProperties,"jco.client.passwd");
logonStr[3] = PropertyManager.getProperty(applicationProperties,"jco.client.ashost");
logonStr[4] = PropertyManager.getProperty(applicationProperties,"jco.client.sysnr");
mConnection = JCO.createClient(logonStr[0],      // SAP client
logonStr[1],    // userid
logonStr[2],    // password
"IT",           // language
logonStr[3],    // application server host name
logonStr[4]);   // system number
If I test locally this code it works fine and the login datas are extracted from the 'login.properties' file.
But when I deploy my PAR file in the Portal seems that the 'login.properties' file isn't found by my application...
Which could be the cause??
Could it be a permission problem??
Any Ideas?
Thanks in Advance,
Best Regards

Hi Shyam,
Thanks for your answer!
I could use the string "ashost.domain.dom" instead to extract it from the 'login.properties' but I need also the others login info as username and password.
My problem is that the 'login.properties' file is not found by my application when the PAR file is deployed in the portal...
I need to know if I need to move the 'login.properties' file in another package or something else...
Any ideas??
Have I to declare the .properties file in some configuration file (for example portalapp.xml or somthing similar..) ??
Best Regards...

Adobe Connect Enterprise Server 6 doesn't work on Firefox and Chrome

Hi everyone, we are using adobe connect enterprise server 6 recently the layout on Chrome and Firefox looks horrible but it works fine on IE, i have attach a photo of how it look on Firefox, any suggestion what the problem might be, thanks in advance.
When we get this when we login:
function showContentWithNav(url, pres, session, cw, ch, noScale, scrollbar, toolbar, status, location, target) {
        if (target == undefined)
            target = "";
no need for adding session in URL. could be misused or mistakenly sent by user to others.
and then used to access to webapp by someone.
-- REMOVING IT   --
var w, h, l, t;
if (pres) {
w = 0.96 * screen.width;
h = 0.76 * screen.height;
l = (screen.width - w) / 2;
t = (screen.height - h) / 2;
} else if (noScale) {
w = cw;
h = ch;
l = (screen.width - w) / 2;
t = (screen.height - h) / 2;
} else {
if (cw > 0 && ch > 0) {
if (cw <= screen.width) {
w = cw;
h = w * ch /cw;
if (h > screen.height) {
h = screen.height;
w = h * cw / ch;
} else {
w = 0.4 * screen.width;
h = 0.3 * screen.height;
l = (screen.width - w) / 2;
t = (screen.height - h) / 2;
var options = "toolbar=" + toolbar + ",status=" + status + ",location=" + location + ",resizable=1,left=" + l + ",top=" + t + ",width=" + w + ",height=" + h;
if (scrollbar==false)
options += ",scrollbars=no";
else
options += ",scrollbars=yes";
var win = open(url, target, options);
     * Default showContent window, which displays popup w/ no navigation.
    function showContent(url, pres, session, cw, ch, noScale, scrollbar, target) {
      var toolbar = 0;
var status = 0;
var location = 0;
showContentWithNav(url, pres, session, cw, ch, noScale, scrollbar, toolbar, status, location, target);

I opened a new Flex project and then tried again. I finally found that it's not a problem of flash but div rendering.
It seems Firefox and Chorme don't pass mouse wheel event automatically if div layout is set to "absolute".
Although this is not a Flex issue, any idea of passing that event to flash will be appriciated. I haven't find a way to do it so far :-(
What I'm doing is editing the "index.tamplate.html" to test. I added a div to contain the div of "flashContent" and set it's style to:
    position: absolute;
    top: 150px; left: 150px;
    height: 250px; width: 250px;
    z-index: 10;
Another div's z-index is set to 1 to test the overlay effect.
The reason why I added a div to contain the original div of flash, is I cannot figure out a way to effectively edit the CSS of the "flashContent" div.
Any help will be thankful!!

HT1947 Home sharing doesn't work. I tried all the items in the troubleshooting section. It just sits there and says turn on home sharing in itunes in the remote app. It's on. Connecting to a library doesn't work either because my phone doesn't show up on

Iphone 5. Anything else I can try? Itunes and iphone and the app are all up to date.

I brought my macbook air at home, everything worked perfectly: iPhone, iPad and Apple TV can connect. So basically I guessed that the issue was coming from the iMac, something preventing it to be discovered. I've checked the bonjour broadcasting and oh, surprise, the iMac wasn't broadcasting... Weird because it's a setup from a Time Machine, the environment I am running currently on the macbook air.
Anyway, if this can help someone else:
I've ran:
ps aux | grep mDNS
and saw that for the iMac the daemon was launched with the argument -NoMulticastAdvertisements.
I've setup the daemon to run back as normal and restarted the computer:
sudo defaults write /System/Library/LaunchDaemons/com.apple.mDNSResponder ProgramArguments -array /usr/sbin/mDNSResponder -launchd
After the reboot, everything works flawlessly (it has never worked before for the 6 months I had the Apple TV).
Also interesting discovery and I think it's new because I don't remember being able to do that before, but some of my devices are on the separate 5Ghz network, some are on the 2.4Ghz and they can still all communicate flawlessly. I can use AirPlay on the Export Express that is on the 2.4 from the iMac that is on the 5Ghz, and I can access the iMac library from whatever band. Pretty nice!

EBP/CCM XI Catalog scenario; TCP RFC connection EBP to XI doesn't work

Similar Messages

Maybe you are looking for